This reverts commit 62d5558f76.
This actually does not work, as patches contain paths relative to the
toplevel directory as well.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
>From [1]:
* All GCC 8.2 features. For details on GCC 8 release series.
* Linaro specific pre-processor macros to ensure that this is a
continuation from the Linaro releases.
* Spectre v1 mitigation backport from upstream FSF trunk include the
revisions. This is an initial backport of those mitigations in
the GNU toolchain and should be regarded as support for prototyping
and early access only. Moreover, while the backports include support
for the other architectures, they are included for completeness and
all issues regarding these patches must be taken up upstream in the
https://gcc.gnu.org/bugzilla by reproducing the same with upstream
FSF trunk.
Arm is interested in feedback regarding these workarounds for
Spectre v1.
A description of the mitigation has been published on LWN.net.
See "Release Note":
[1] https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads#
Tested with qemu_aarch64_virt_defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
>From [1]:
* All GCC 8.2 features. For details on GCC 8 release series.
* Linaro specific pre-processor macros to ensure that this is a
continuation from the Linaro releases.
* Spectre v1 mitigation backport from upstream FSF trunk include the
revisions. This is an initial backport of those mitigations in
the GNU toolchain and should be regarded as support for prototyping
and early access only. Moreover, while the backports include support
for the other architectures, they are included for completeness and
all issues regarding these patches must be taken up upstream in the
https://gcc.gnu.org/bugzilla by reproducing the same with upstream
FSF trunk.
Arm is interested in feedback regarding these workarounds for
Spectre v1.
A description of the mitigation has been published on LWN.net.
See "Release Note":
[1] https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads#
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
>From [1]:
* All GCC 8.2 features. For details on GCC 8 release series.
* Linaro specific pre-processor macros to ensure that this is a
continuation from the Linaro releases.
* Spectre v1 mitigation backport from upstream FSF trunk include the
revisions. This is an initial backport of those mitigations in
the GNU toolchain and should be regarded as support for prototyping
and early access only. Moreover, while the backports include support
for the other architectures, they are included for completeness and
all issues regarding these patches must be taken up upstream in the
https://gcc.gnu.org/bugzilla by reproducing the same with upstream
FSF trunk.
Arm is interested in feedback regarding these workarounds for
Spectre v1.
A description of the mitigation has been published on LWN.net.
See "Release Note":
[1] https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads#
Tested with qemu_arm_vexpress_defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes regressions introduced by the v8.14.0 security release. From the
announcement:
The 8.14.0 security release introduced some unexpected breakages on the 8.x
release line. This is a special release to fix a regression in the HTTP
binary upgrade response body and add a missing CLI flag to adjust the max
header size of the http parser.
https://github.com/nodejs/node/blob/master/doc/changelogs/CHANGELOG_V8.md#8.15.0
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump Linux to version 4.14.91 and U-Boot to version 2018.11.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot and kernel to their latest releases.
Remove the documented limitations. Recent kernels added support for the
SOM SPI flash, and the carrier SFP port.
Mention the 'dd' command in the warning text. No script is involved.
Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
According to https://www.kernel.org/category/releases.html, these kernel
versions are no longer supported, so drop them now that we have added 4.20.x
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The script is utils/get-developers but the manual refers to get-developer in
several places.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This update includes two specific fixes that have been backported
to the glibc 2.28 release branch from the glibc master branch:
1) UAPI header file asm/syscalls.h has been merged into the UAPI
asm/unistd.h header file for the RISC-V architecture in the
4.20 kernel. This causes the glibc 2.28 build to break.
2) sysdeps/ieee754/soft-fp: ignore maybe-uninitialized with -O
[BZ #19444]. The current patch for this issue can now be dropped
from Buildroot.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
scp download is broken, because scp is called without filename argument and
only the server is specified. The call is:
scp <server> <outputfile>
but should be:
scp <server>/<filename> <outputfile>
Instead of assuming '-u' lists a full URL including filename (which it is
not), align with the wget helper where -u is the server URL and -f gives the
filename.
With this commit, an scp download can work if FOO_SITE_METHOD is explicitly
set to 'scp' and the server does not have a scheme prefix 'scp://'.
The next commit will handle the case where a scheme prefix is present.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: s/URL/URI/, as noticed by Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For some odd reason, the new pkg-config 1.5.3 changed the behavior of
"pkg-config --version": as soon as another argument than "--version"
is passed, the code assumes the user wanted to run "--modversion"
instead.
Sadly, this breaks badly with our pkg-config wrapper that
unconditionally passes --static to pkg-config when
BR2_STATIC_LIBS=y. When ffmpeg calls "pkg-config --version" to test if
pkg-config is available and functional, it's actually "pkg-config
--static --version" that gets executed. pkg-config assumes that the
user wanted to use --modversion and bails out with an error.
This causes a build failure of ffmpeg in BR2_STATIC_LIBS=y
configuration.
This misbehavior of pkg-config has been reported upstream at
https://git.dereferenced.org/pkgconf/pkgconf/issues/19, but until it
gets fixed, we work around the issue by reverting the commit that does
the "hey let's assume you're using --modversion if --version is passed
with more than one argument".
Fixes:
http://autobuild.buildroot.net/results/ed82a95e1866ea2caadbb3433b2a255b2cf621d2/
(and plenty of other ffmpeg + BR2_STATIC_LIBS=y build failures)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, if a user runs "make" while specifying a specific package
(IE: make -p foo), the Makefile logic skips checking to see if all the
dependencies are selected in the specified packages config file. This behavior
is useful to test simple packages which do not have "complex" dependencies.
However; if a developer uses test-pkg -p ${package_name} to check their package,
the package may pass all the checks, but would have otherwise failed with a
simple "make" because the developer may have failed to add a select line in
packages config file, even if there is a new dependency in the packages
Makefile.
Pass the environment variable "BR_FORCE_CHECK_DEPENDENCIES" to the Makefile in
the test-pkg script, and check it's value in the Makefile. If the value is
"YES" force checking for dependency issues.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Config.in comment of lua-msgpack-native only indicates that it
needs Lua 5.1, while the package can actually build with LuaJIT. This
commit adjusts the comment to match the reality.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
All the packages modified by this commit have their Config.in included
by package/Config.in inside a BR2_PACKAGE_HAS_LUAINTERPRETER &&
!BR2_STATIC_LIBS condition. Therefore, duplicating the
BR2_PACKAGE_HAS_LUAINTERPRETER condition in each of their Config.in
file is redundant and unnecessary. This commit drops such redundant
"depends on" statements.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We need to update linux/linux.hash as part of this commit, because
package/linux-headers/linux-headers.hash is a symlink to
linux/linux.hash.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In this release the Opus decoder opusdec has been converted to use the
opusfile library, and the Opus encoder opusenc has been converted to
use the libopusenc library. These libraries make it easy to robustly
read and write Ogg Opus audio files, and enable some new features.
Due to this, opus-tools now needs to depend on opusfile and
libopusenc. We take this opportunity to reorder alphabetically the
dependencies in Config.in and .mk files.
The license file hash has changed for two reasons:
- The xiph.org URL was changed from http:// to https://
- White-space changes
There are no other changes, and no change that affect the licensing
conditions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changes since the v0.10 release:
- Fix two potential integer overflows. (These were not
security-critical unless the compiler took the opportunity provided
by the undefined behavior to format your hard drive.)
- Allow JPEGs in METADATA_BLOCK_PICTURE tags to include EXIF data.
- A few warning fixes for gcc 8.
- Make opus_tags_copy return OP_EFAULT on failure instead of returning
success.
- Various integration and testing environment improvements.
This release is backward-compatible with the previous release. We
recommend all users upgrade.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This release fixes two minor bugs:
- a gapless bug in the LPC filtering
- a crash on destroy when using the pull API
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This Opus 1.3 major release again brings quality improvements, new
features, and bug fixes. Changes since 1.2.x include:
- Improvements to the VAD and speech/music classification using an RNN
- Support for ambisonics coding using channel mapping families 2 and 3
- Improvements to stereo speech coding at low bitrate
- Using wideband encoding down to 9 kb/s
- Making it possible to use SILK down to bitrates around 5 kb/s
- Minor quality improvement on tones
- Enabling the spec fixes in RFC 8251 by default
- Security/hardening improvements
Notable bug fixes include:
- Fixes to the CELT PLC
- Bandwidth detection fixes
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update license file hash; last paragraph text formatting change.
Cc: Scott Fan <fancp2007@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This version requires host-python3-setuptools, because meson no longer
falls back to distutils for its installation if setuptools cannot be
found: setuptools *must* be available.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, host Python packages that use setuptools are installed as
Python Eggs, i.e they are installed in
$(HOST_DIR)/lib/python2.7/site-packages/Something-<version>.egg. Once
installed, each Python Egg is registered to a file called
$(HOST_DIR)/lib/python2.7/site-packages/easy-install.pth. This file is
read by the Python interpreter so that the installation location of
each Egg is added to the Python path, and can be found by the Python
interpreter.
However, the fact that the installation of different Python modules
need to update a common file is clearly not compatible with
per-package directories and top-level parallel build.
To fix this, we avoid using Python Eggs using the same
--single-version-externally-managed option that we use for target
modules. This option is normally meant for distributions packaging
Python modules, and can therefore only be used if either --record (to
record the list of files being installed) or --root is
passed. --root=/ works fine and was suggested by
https://stackoverflow.com/questions/6301003/stopping-setup-py-from-installing-as-egg/33791008#33791008.
With this change, host Python modules installed by setuptools are now
installed in the "regular" way, i.e directly in
$(HOST_DIR)/lib/python2.7/site-packages/mako for host-python-mako.
This makes the installation of host Python modules more similar to the
one of target modules, and makes it compatible with per-package
directory support and top-level parallel build.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Asaf Kahlon <asafka7@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When a package uses "setuptools" as its <pkg>_SETUP_TYPE, we currently
add a dependency on host-python-setuptools. This means that:
(1) When BR2_PACKAGE_PYTHON=y, the default host Python version is
Python 2.x, and host-python-setuptools is installed for
host-python.
(2) When BR2_PACKAGE_PYTHON3=y, the default host Python version is
Python 3.x, and host-python-setuptools is installed for
host-python3.
(3) When no target Python interpreter is selected, the default host
Python version is Python 2.x, and host-python-setuptools is
installed for host-python.
Situations (1) and (3) are problematic for host Python packages that
need Python 3.x. Such packages use <pkg>_NEEDS_HOST_PYTHON = python3,
but if they use setuptools as their setup type, they will not find
setuptools installed for host-python3 in situations (1) and (3)
described above.
We currently have a single package that sets <pkg>_NEEDS_HOST_PYTHON =
python3: host-meson. host-meson generally works because if setuptools
is not found, it falls back to distutils, which is part of the
standard Python library. However, if there is a setuptools version
installed system-wide, it may be picked up, but may not necessarily be
the same version as Buildroot setuptools, potentially causing
problems.
This commit makes the necessary change to the python-package
infrastructure to fix this behavior, by identifying the following
cases:
- When a host Python package says <pkg>_NEEDS_HOST_PYTHON = python3,
then we know it wants setuptools installed for host-python3, so we
use host-python3-setuptools.
- When a host Python package says <pkg>_NEEDS_HOST_PYTHON = python2,
then we known it wants setuptools installed for host-python, so we
use host-python-setuptools.
- When BR2_PACKAGE_PYTHON3=y, and we have a target package, or a host
package with no NEEDS_HOST_PYTHON option, then we want setuptools
installed for host-python3, so we use host-python3-setuptools.
- When BR2_PACKAGE_PYTHON=y or no target interpreter is enabled at
all, and we have a target package, or a host package with no
NEEDS_HOST_PYTHON option, then we want setuptools for host-python,
so we use host-python-setuptools.
To make this happen, we use host-python3-setuptools introduced in a
previous commit, but we also change host-python-setuptools to force
its installation for host-python. The latter is needed if you build
with BR2_PACKAGE_PYTHON3=y but want to install a Python-based package
that has NEEDS_HOST_PYTHON=python2.
There is one single package that needs be adjusted following this:
lirc-tools, because it is not using the python-package
infrastructure. It directly depends on host-python-setuptools, which
no longer works because host-python-setuptools now only installs for
Python 2.x, while lirc-tools Python binding only supports Python
3.x. Switching to host-python3-setuptools solves this problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Asaf Kahlon <asafka7@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This new package allows to install the host version of setuptools for
python3, regardless of what the default Python version is. It will be
used by the python-package infrastructure to make sure that host
Python packages that need python3 and setuptools have setuptools
installed for Python 3.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: replace duplicated patch by a symlink to the same patch in
package/python-setuptools/]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Current collectd version 5.7.1 fails to compile because there is a
check which breaks the compilation if lm_sensors API >= 0x500, but in
the mainline codebase this check was removed in commit:
069796bd76
So add backported patch based on this commit.
Fixes:
http://autobuild.buildroot.net/results/c3c84ca6e11b268ba5ada7e3dca18bca681ee43d/
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, json-for-modern-cpp requires cmake to be at least cmake-3.8,
but our dependencies only check for cmake-3.1.
It turns out that json-for-modern-cpp is over strict, and could very
well do with just cmake-3.1
Fixes:
http://autobuild.buildroot.org/results/1f8/1f893d8bc7df3bfefd31df69aba918e2121cfaf7/
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Before this commit, the grub configuration file was copied to the
TARGET_DIR in a post-image hook, after the filesystem has been
generated. It was kinda working because the board/pc's grub
configuration and the default one are the same and the later was
copied during the build process of the grub2 package.
This commit ensures the custom board/pc grub configuration is copied at
the right time.
Signed-off-by: Grégoire Delattre <gregoire.delattre@gmail.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Luarocks addon does not properly indent with a tab, let's fix that
manually for the time being, to avoid check-package complaints.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit aligns the .hash files of Lua packages so that they match
with the output of the recently added Buildroot addon for Luarocks.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit aligns the Config.in files of Lua packages so that they
match with the output of the recently added Buildroot addon for
Luarocks.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit aligns the .mk files of Lua packages so that they match
with the output of the recently added Buildroot addon for Luarocks.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This addon allows to generate a Buildroot package from a Luarocks
package definition.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This includes an upstream patch that fixes the following error:
```
/home/naourr/work/instance-1/output/build/php-amqp-1.9.3/amqp_channel.c: In function 'php_amqp_destroy_fci':
/home/naourr/work/instance-1/output/build/php-amqp-1.9.3/amqp_channel.c:104:37: error: lvalue required as decrement operand
GC_REFCOUNT(fci->object)--;
^~
/home/naourr/work/instance-1/output/build/php-amqp-1.9.3/amqp_channel.c: In function 'php_amqp_duplicate_fci':
/home/naourr/work/instance-1/output/build/php-amqp-1.9.3/amqp_channel.c:115:40: error: lvalue required as increment operand
GC_REFCOUNT(source->object)++;
^~
make[1]: *** [Makefile:206: amqp_channel.lo] Error 1
```
The patch was created from the commit at:
1205d3287d
Upstream has not yet made an official release that includes it. Fixes:
http://autobuild.buildroot.net/results/222873a689f7b9da20acb3604b8364885e96b98dhttp://autobuild.buildroot.net/results/90710cb2a4873f39aa75db79ff70aa9e4bdf83ae
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit 922b82bde9 ("libsigrok:
bump version to 0.5.1"), libsigrok depends on BR2_ENABLE_LOCALE, but
this dependency was not propagated to pulseview. This commit fixes
this issue.
Reported-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
