This patch bumps CIP to the latest SLTS version v4.19.13-cip1.
Kernel based on 4.4 is not deprecated, it will continue to be supported
as planned by the CIP foundation.
If the 4.4 version is needed, it should be selected manually.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the Linux CIP version to v4.4.176-cip31.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We currently do the Linux build as follows:
make <imagename>
if modules enabled; make modules; fi
However, Clement Léger recently reported that due to us not using the
"all" target, the GDB scripts that the kernel can build when
CONFIG_GDB_SCRIPTS is enabled are not built, since upstream kernel
commit 67274c083438340ad16c1437caebc84e1253b224 (merged in v5.1) moved
that logic to a separate scripts_gdb target, which is a dependency of
the "all" target.
While we could add some more logic to explicit generate the
"scripts_gdb" target, this logic would fail on Linux < 5.1 for which
this make target doesn't exist.
So instead, let's simplify the build logic, and use:
make all <imagename>
The "all" target automatically depends on "modules" if CONFIG_MODULES
is set, so we no longer need to explicit generate the "modules" target
separately.
As a result of this change, we may generate additional kernel images
compared to what was done previously, but such images would anyway not
be installed, and the additional build time is minimal.
We did some research as to why the kernel build was done like this in
Buildroot, and it's been like that since linux/linux.mk was added back
in 2010 by commit 487e21cff6 ("New,
simpler, infrastructure for building the Linux kernel").
Reported-by: Clément Leger <cleger@kalray.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
A patch was added to the Linux kernel in 5.1.0-rc3 which adds a
requirement that the host build environment include pkg-config. Add the
correct host-pkgconf dependency and environment variables to ensure
Linux picks up the correct libraries.
Move the existing LINUX_MAKE_ENV assignment earlier, to simplify the
append-assignment in the libelf conditional block.
Fixes: #11761
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: extend commit message as suggested by Yann]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This sets 5.0 to be the default, moving from 4.19 which was used instead
of 4.20 for the LTS branch.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This sets 5.0 to be the default, moving from 4.19 which was used instead
of 4.20 for the LTS branch.
We need to update linux/linux.hash as part of this commit, because
package/linux-headers/linux-headers.hash is a symlink to
linux/linux.hash.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We will need to build Image files for OpenSBI so allow that now.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We are back with 3 binutils version in Buildroot.
Now CFI support is always present for NIOSII.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With the arrival of linux v5.0, we need yet another condition to set
_SITE correctly. Instead of continuing this madness, solve the problem
generically: use v2.6 for 2.6.*, and use the number before the first dot
in the other cases.
While we're at it, remove the comment which has been incorrect since
80d7b68167 (7 years ago).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Tested-by: Adam Duskett <aduskett@gmail.com>
Reviewed-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We have virtually no way to know the hashes for user-supplied patches,
so we should just ignore them.
Reported-by: Simon van der Veldt <simon.vanderveldt@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Tested-by: Simon van der Veldt <simon.vanderveldt@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Xenomai has two mutually exclusive cores:
- Cobalt: dual-kernel approach: patched kernel + userland
- Mercury: only userland
In the Cobalt core, not all architectures are supported. This is the source
of the existing ARCH_SUPPORTS variable.
In the Mercury core, there is no imposed architecture restriction.
Rename the XENOMAI_ARCH_SUPPORTS flag to XENOMAI_COBALT_ARCH_SUPPORTS and
move its check from the Xenomai package to the Cobalt core.
Nevertheless, even for Mercury, there are some restrictions:
- pthread_atfork is used, which requires an MMU
- sync functions like __sync_sub_and_fetch and __sync_add_and_fetch are
expected.
As the corresponding 'linux extension' selects Xenomai, we add the
MMU and sync dependencies there too. They may or may not already be covered
by XENOMAI_COBALT_ARCH_SUPPORTS flag.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps the Linux CIP version to v4.4.171-cip30 and updates the
download url to the new official one.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add an option to compile device trees in Linux with symbol generation
such that device tree overlays can be loaded on the target system
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
[Arnout: remove "default n" and move setting of LINUX_MAKE_ENV to the
place where the rest is set.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
linux is a bit different than other kconfig-package, because it has
"toolchain" in KCONFIG_DEPENDENCIES. Thanks to this, host-ccache *is*
ready by the time kconfig invocations are made, so we could use
$(HOSTCC) as the host compiler for kconfig related operations.
However, for consistency with other kconfig-package packages, we chose
to use $(HOSTCC_NOCCACHE) as well.
We cannot rely on the default value of HOSTCC passed by the
kconfig-package infrastructure, because $(LINUX_MAKE_FLAGS) also
contains a HOSTCC definition that would override the one passed by the
kconfig-package infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
4.20.x is not a long term support kernel, but 4.19.x is (supported until end
2020):
https://www.kernel.org/category/releases.html
With the upcoming Buildroot 2019.02 release being a LTS release, default to
4.19.x instead.
Notice: The userspace API breakage in net_stamp.h causing build failures has
now been fixed in 4.19.14 by commit e4a2ffe9029fd (net: Use
__kernel_clockid_t in uapi net_stamp.h)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: add comment in linux/Config.in and
package/linux-headers/Config.in.host so that we don't mistakenly bump
to 4.20+.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
According to https://www.kernel.org/category/releases.html, these kernel
versions are no longer supported, so drop them now that we have added 4.20.x
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We need to update linux/linux.hash as part of this commit, because
package/linux-headers/linux-headers.hash is a symlink to
linux/linux.hash.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Processor Counter Monitor (PCM) is an application programming interface
(API) and a set of tools based on the API to monitor performance and
energy metrics of Intel(R) Core(TM), Xeon(R), Atom(TM) and Xeon Phi(TM)
processors.
This package contains a patch on the pmu-query.py script to look for the
pcm-core program at the default path. It's not nice to have a Buildroot
specific patch but let's use one while we look for a solution that is
acceptable upstream.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Peter: Needs C++, force X86_MSR on in linux]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When using an initramfs, on the first-pass build, we create a dummy cpio
so that the build succeeeds. The real cpio will come later, and we'll do
a second-pass build to use the actual cpio.
However, when we touch that dummy cpio, the images/ directory may not
yet exist, since commit d0f4f95e39 (Makefile: rework main directory
creation logic) removed its creation at the begining of the build, to
only at the moment we need it, i.e. during the *_INSTALL_IMAGES_CMDS
steps.
However, the linux build is not a _INSTALL_IMAGES_CMDS step, so there is
no guarantee that images/ already exist at that time.
Fix that by explicitly creating images/ before touching the dummy cpio.
Reported-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps the Linux CIP kernel to version v4.4.154-cip28
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Checking for the existence of the dtc binary built by the
non-dependent dtc package may cause instable behaviour when giving more
freedom on the order of how the packages are built (parallelization).
In addidion, when moving to per-package host/target method, the check
would always trigger in the isolated host, leading to linux-dtc always
being installed as dtc.
This in turn may lead to undesired overwriting of the real host-dtc binary
when finally assembling the global host dir.
Thus rework the linux-dtc install condition to be defined by configuration
rather than compile time order.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We already turn on kernel features for several packages, so let's do it
for intel-microcode too, otherwise it's impossible to load the microcode
(by means of iucode-tools).
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We already turn on kernel features for several packages, so let's do it
for audit too, since the daemon is useless and fails to load otherwise.
Notice that we also turn NET on, since AUDIT depends on NET, like we do
for the wireguard package.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a simple way to change the linux bootup logo.
The patch was kept purposely simple to support only the use cause
where a user needs a color linux boot up logo.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Peter: clarify/reword option/help text, automatically enable framebuffer
support, fix convert path]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Linux tarball checksum was recently updated, including the one for
version 4.9.133. The checksum for this particular version of Linux
misses one character which lead to a build issue as the checksum does
not match:
ERROR: linux-4.9.133.tar.xz has wrong sha256 hash:
ERROR: expected: 3730fc025ba330a6f4908a6a1e4cb86d821000c84167721680ccf1b37b26563
ERROR: got : 53730fc025ba330a6f4908a6a1e4cb86d821000c84167721680ccf1b37b26563
ERROR: Incomplete download, or man-in-the-middle (MITM) attack
This patch fixes it.
Fixes: 0064c7b251 ("{linux, linux-headers}: bump 4.{4, 9, 14, 18}.x series")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added a hash file for the Linux kernel. Hashes have been copied
from the appropriate sha256sums.asc files on kernel.org.
The Linux hash file is also shared with the linux-headers package
via a symbolic link.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
[Thomas: update hashes with recent linux-headers changes.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Starting with linux-4.18, the kconfig from the kernel can call
to the compiler to test its capabilities; see:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/scripts/Kconfig.include
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
host-{flex,bison} are only needed to generate the dtc parser, so we
don't need them if the kernel does not have support for device tree.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rely on the system provided ones if avalable, and only resort to use our
owns if the sytem does not provide them.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The commit that added the dependency on host-{bison,flex} did
so because the pre-generated kconfig parser source files were
removed from the kernel tree, in linux-4.16.
But then, in linux-4.17, the pre-generated dtc parser source
files were in turn removed as well.
So, document the two reasons why they are needed, so we don't
accidentally remove them when we (soon) introduce the kconfig
dependencies.
(Also fix the first assignment to LINUX_DEPENDENCIES to be a
simple assignement, not an append-assignment.)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit replaces the loop copying out-of-tree DTS into the kernel
tree by a make foreach loop instead of a shell for loop. This allows
to error out if one of the DTS file cannot be copied (for example if
it doesn't exist).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the CIP Linux kernel to version v4.4.138-cip25
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc-8 started warning about function aliases that have a non-matching
prototype. This seems rather useful in general, but it causes tons of
warnings in the Linux kernel, where we rely on abusing those aliases
for system call entry points, in order to sanitze the arguments passed
from user space in registers.
See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82435
Disable the attribute-alias warning introduced by gcc-8 by adding
-Wno-attribute-alias to KCFLAGS.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Perf profiling cannot be used if CONFIG_PERF_EVENTS is not enabled in the
kernel configuration. Similar to other tools, like ktap, we can enable the
right options automatically.
Signed-off-by: Jan Heylen <jan.heylen@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This issue only applies to kernels built with CONFIG_THUMB2=y, so reword the
comment to make that more clear.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit f13477b (linux: config.in: add comment for Arm Cortex-M) added a
comment so that the user that the linux kernel may miscompile with
binutils 2.29+, when the target is an armv7m CPU.
However, the real trigger is a compilation in thumb2 mode, which happens
to be the only option for armv7m CPUs.
We can't know whether the kernel will be built in arm or thumb2 mode,
though, because we do not have that information: it is only available in
the Linux' .config file, which we don;t have access to at the time we
run our menuconfig.
So, relax the conditions under which the comment is made, so that it
appears as soon as binutils are >= 2.29 (i.e. not 2.28, which is the
oldest we support) for ARM CPUs.
[Peter: reword comment]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Christophe Priouzeau <christophe.priouzeau@st.com>
Cc: Laurent GONZALEZ <br22@gezedo.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit cbe43fd417.
Now that the binutils default has been changed for ARMv7M, this is no longer
needed.
Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When binutils > 2.28 are selected on Arm Cortex-M cpu,
linux kernel does not boot due to a new implementation
of 'adr pseudo instruction' on binutils.
Bugzilla thread: https://bugs.busybox.net/show_bug.cgi?id=11051
Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bump the Linux CIP kernel to version v4.4.130-cip23
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Kconfig uses either pkg-config or hard-coded /usr/include paths to find
the ncurses or ncursesw library. If ncursesw is found, it will include
<ncursesw.h>. Since Buildroot's host-ncurses doesn't install a .pc file,
and linux.mk anyway doesn't pass the pkg-config options to find the host
pkg-config files, Kconfig will always find the system's ncursesw.h.
However, since commit dde090c299 (linux: fix passing of host CFLAGS and
LDFLAGS) HOST_LDFLAGS is passed to the linux build system. Thus, if
host-ncurses was already built before 'make linux-menuconfig' is called,
the build will pick up libncurses from the host directory, which is NOT
widechar. Thus, two different ncurses configurations are mixed into the
final mconf program. This will result in serious breakage in the
rendering of the menus (lots of @ and question mark characters).
As a workaround (suggested by Yann), don't pass HOST_CFLAGS and
HOST_LDFLAGS when running kconfig commands. For kconfig, we should never
need host packages anyway. This way, the kconfig calls will always use
the system's ncurses and never our host-ncurses.
Note that the same problem could pop up for other kconfig packages as
well if we ever pass HOST_CFLAGS/HOST_LDFLAGS to them. We could force
HOSTCC=$(HOSTCC) directly in kconfig-package. However, for now there
are no other packages that exhibit this problem, so this can be
revisited when they do.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: David De Grave <david.degrave@essensium.com>
Cc: Scott Fan <fancp2007@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes https://gitlab.com/buildroot.org/buildroot/-/jobs/66561794
LINUX_DTS_NAME may end up with a leading space because of the += logic, and
may contain multiple dts files - Neither of which works when we construct
the {cu,simple}Image.$(LINUX_DTS_NAME) make target name.
Fix it by using the first word in the variable.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These three symbols:
KERNEL_ARCH_PATH
KERNEL_DTBS
KERNEL_DTS_NAME
are defined and used only inside this file, so use the LINUX_ namespace
for them instead of KERNEL_.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use only one space before backslash.
Remove consecutive empty line.
Indent with tabs.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Make it follow the package coding style by removing redundant info.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Christian Stewart <christian@paral.in>
Cc: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Custom dts files are still conditionally copied based on non existing
boolean. So it is currently not possible to use custom dts file(s) at all.
List of dts files is now iterated and files are copied into dedicated kernel arch dir.
Signed-off-by: Rafal Susz <rafal.susz@gmail.com>
Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Just use whatever the user specified in the list. An empty list means no
DTS was specified.
No need to add legacy option, as the behaviour does not change.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Simon van der Veldt <simon.vanderveldt@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some Linux kernel configuration options (such as CONFIG_UNWINDER_ORC)
require building a host program that needs libelf.
Users who have libelf installed on their system won't see a problem,
but users who don't have libelf installed will get a build
failure. Therefore, this commit adds an option that allows a user to
indicate that his Linux kernel configuration requires libelf. When
this option is enabled, we add host-elfutils to the dependencies of
the linux package (host-elfutils provides the libelf library).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some Linux kernel configuration options (such as
CONFIG_SYSTEM_TRUSTED_KEYRING) require building a host program called
extract-cert, which itself needs OpenSSL.
Users having OpenSSL installed on their system won't see a problem,
but users who don't have OpenSSL installed will get a build
failure. This commit adds a new option that allows users to indicate
that their Linux configuration requires building host-openssl.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We were passing HOSTCFLAGS="$(HOSTCFLAGS)" to Linux. However:
- HOSTCFLAGS in Buildroot doesn't exist, and is empty, so this
assignment never did anything. The name of the variable in
Buildroot in HOST_CFLAGS.
- HOSTCFLAGS in Linux isn't used everywhere, and passing it overrides
the default HOSTCFLAGS value defined in the main Linux kernel
Makefile.
In addition, there is no way to pass additional host LDFLAGS in the
Linux kernel build system.
Therefore, we simply shoehorn our HOST_CFLAGS and HOST_LDFLAGS while
passing HOSTCC to the Linux kernel build system. This has been tested
to work fine with host OpenSSL and host libelf only available in
$(HOST_DIR).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For some boards, for example the Raspberry Pi, it's necessary to build
in-tree dts files as well as custom/out of tree dts-files (dt-blob.bin).
The existing logic made these two options exclusive, this commit changes
that to allow both in-tree as well as custom sources for dts files.
Signed-off-by: Simon van der Veldt <simon.vanderveldt@gmail.com>
[Arnout: re-wrap help, add extra empty line, change = into +=]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add allwinner mali kernel driver package. Used in combination with
userspace Allwinner openGL libraries, it gives possibility to use 3D openGL
SoC acceleration.
[Peter: Rename to sunxi-mali-mainline-driver. Use revision selection from
sunxi-mali-mainline package. Depend on that package and default to
y if dependencies are met. Tweak Linux config]
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bump the Linux CIP kernel to version v4.4.112-cip18
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the Linux CIP version to v4.4.105-cip15.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bump the Linux CIP kernel to version v4.4.98-cip13
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the rule to rebuild the Linux kernel with an initramfs
directly depends on the path of the file of the intermediate cpio image.
This is inherently "bad" from a purity point of view; linux.mk should
not have to delve into the fs internals.
Rather, make it directly depend on the "frontal" rule that generates the
cpio image.
Drop the comment for linux-rebuild-with-initramfs, it was misleading
(talking about generating "the initramfs list of files", which is not
what was done, since we use a cpio as source of initramfs, not a list of
files).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The LINUX_KCONFIG_FIXUP_CMDS are meant to deselect any compression
option that are not selected in the buildroot configuration. But it only
deselects the last one in the list instead of all of them because it
overwrites the LINUX_COMPRESSION_OPT_ variable instead of appending to
it. Only the last option set to that variable gets deselected.
This produces the warning:
.config:2216:warning: override: KERNEL_GZIP changes choice state
is emitted when buildroot runs olddefconfig when buildroot configures a
kernel with a custom config that has a different kernel compression
option set to what is configured in buildroot.
Accumulate all the deselected compression options instead of overwriting
them to ensure all non-selected options get deselected..
Signed-off-by: Cam Hutchison <camh@xdna.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Starting with 4.12-rc1, tarballs are generated by cgit directly from
Linus's tree. This also implies that no .tar.xz can be used for them.
This method also applies to older release candidates.
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
[Arnout: added comment in the code]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We don't add a full stop at the end of the prompt text.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Xtensa core configuration must be added to linux before it can be
built for that xtensa CPU variant. Extract configuration files from the
xtensa overlay as is done for other packages that need to be configured
for a specific xtensa core.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/bin' | xargs sed -i 's%$(HOST_DIR)/usr/bin%$(HOST_DIR)/bin%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We don't have a hash for any linux version. We currently also don't
have a hash for the latest version, but if we ever add a hash, it
will only be for the latest version.
This simplifies the code a little because soon we will add hash checks
for git as well, so we also need an exclusion in that case. It's much
easier to always exclude except in the single case where we do have a
hash.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In 4c10eedc1 (systemd: enable required kernel features), we added
setting a few required kernel features to ensure systemd works.
However, there was a typo for one of the variables: CONFIG_TMPFS_XATTR
was written as CONFIG_TMPFS_POSIX_XATTR, which does not exist (and never
ever existed, at least not since 2.6.12)...
Reported-by: Michael Heinemann <posted@heine.so>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Michael Heinemann <posted@heine.so>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A long time ago, the blind config option BR2_LINUX_KERNEL_UBOOT_IMAGE
was introduced to be able to trigger the linux -> host-uboot-tools
dependency. Back in those days, there was no user-configurable
BR2_PACKAGE_HOST_UBOOT_TOOLS.
Now, however, it is possible to select a custom kernel image name that
needs uboot-tools, and manually enable BR2_PACKAGE_HOST_UBOOT_TOOLS. In
this case, however, the linux -> host-uboot-tools is missed and the
build is not reproducible. An example of such a situation is the
upcoming CI40 defconfig.
As a solution, remove BR2_LINUX_KERNEL_UBOOT_IMAGE entirely. Instead,
just select BR2_PACKAGE_HOST_UBOOT_TOOLS and add the dependency if it
is selected.
Note that this may introduce a redundant dependency in case the user
selected BR2_PACKAGE_HOST_UBOOT_TOOLS for some other reason (e.g. to
be able to generate a U-Boot environment to include in the image, while
the kernel is built as a zImage). However, the redundant dependency
shouldn't hurt much.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Abhimanyu Vishwakarma <abhimanyu.v@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds an easy way to select the CIP project SLTS
kernel within the kernel menu.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
[Thomas: remove BR2_CIP_KERNEL_REPO_URL option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license strings as much as possible.
SPDX short identifier for GPLv2/GPLv2+ is GPL-2.0/GPL-2.0+.
This change is done by using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/\<GPLv2\>/GPL-2.0/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Whitespaces were searched using the following regex:
[ ]{1,}\t
and then manually removed in most of the cases. For
xserver_xorg-server.mk, tabs before backslashes were removed.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Starting with the release 2016.09 xtensa architecture is supported by
the U-Boot. Enable uimage target in xtensa linux kernel.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix commit 400eaa3452 ("linux: bump
default to version 4.10") in which a conflict was not correctly
resolved.
Reported-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The option `BR2_LINUX_KERNEL_CUSTOM_LOCAL` no longer exists (see commit
e782cd5b1b [1]); removing the option. Note
that this legacy option has already been handled (Config.in.legacy) in
the mentioned commit.
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If not set the system will use an empty string which will result in
download errors for 'linux-.tar.gz' packages.
This patch makes it obvious to the user that the variable needs to be
set.
Signed-off-by: Christian Kellermann <christian.kellermann@solectrix.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix kernel reproducible build if a non-C locale is used on the host
system.
When building the Linux kernel, scripts/gen_initramfs_list.sh does 'date
-d"$KBUILD_BUILD_TIMESTAMP" +%s'. In linux.mk, Buildroot sets
KBUILD_BUILD_TIMESTAMP to "$(shell date -d @$(SOURCE_DATE_EPOCH))".
For example, if LANG=fr_FR.UTF-8 is defined in the host system, it does
not work:
- LC_ALL=C date -d"$(LC_ALL=C date)" : ok
- LC_ALL=C date -d"$(LC_ALL=fr_FR.UTF-8 date)" : error
LANG/LC_ALL variables exported in the main Makefiles are not passed in
the $(shell ...) sub-shells.
Signed-off-by: Jean-Baptiste Trédez <jean-baptiste.tredez@basystemes.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Linux kernel include a few information about build environment in its binary.
This feature is incompatible with BR2_REPRODUCIBLE. This patch overload build
information when BR2_REPRODUCIBLE is enabled.
Note that usage of KBUILD_BUILD_TIMESTAMP is not mandatory since Buildroot
use `fakedate'. However, native solution is prefered when upstream
provide one.
Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This adds an ev3dev Linux drivers extension that provides Linux kernel
drivers for LEGO MINDSTORMS EV3 from the ev3dev project.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
