The rule to create the staging symlink has it depend on BASE_DIR, and
the symlink is created in BASE_DIR, which means that when the symlink
is created, BASE_DIR is updated, and thus made more recent than the
symlink itself.
As a consequence, every time one runs 'make', the symlink will be older
than BASE_DIR, and so will be re-created.
Ditto for the host symlink when the user has elected to have an
out-of-tree host dir.
Fix that by changing to using an order-only dependency.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, we delete /usr/share/bash-completion when bash is not enabled.
We need to delete /etc/bash_completion.d too. For example, the jo package
installs files there:
/etc/bash_completion.d/jo.bash
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some toolchains, like the Linaro gcc7 toolchains, now install libstdc++ debug
library symbols to /lib/debug, which can be as large as the library itself.
This commit removes the extra debug content if debugging is not enabled.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When we prepare the release, we generate the manual in various formats,
so that it can be consulted locally without needing the miriads of tools
needed to generate it.
However, this creates the temporary .br2-external.* files in the output
directory, and those end up in the release tarball.
This is not a problem in practice, but is not clean.
Run 'distclean' in the output directory, to get rid of everything but
the generated documentation.
Reported-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Post-build scripts may want to do something based on the list of files
installed by a package. However, since commit
0e2be4db8a the final packages-file-lists.txt
file is only created _after_ the post-build scripts.
Move the assembly of the file lists upwards, before the post-build scripts.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In very limited configurations, it is possible to have a case where no
.files-list-staging.txt files are created. In this case:
cat $(sort $(wildcard $(BUILD_DIR)/*/.files-list-staging.txt)) > \
$(BUILD_DIR)/packages-file-list-staging.txt
becomes:
cat > \
$(BUILD_DIR)/packages-file-list-staging.txt
which of course makes the build hang.. forever.
So we fix this by checking the list is not empty. To keep the code
readable, we introduce an intermediate variable to store the list of
these files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[yann.morin.1998@free.fr: always create the file, even if empty]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
With BR2_PER_PACKAGE_DIRECTORIES=y, we have the following code in the
main Makefile:
target-finalize: $(PACKAGES) $(TARGET_DIR) host-finalize
@$(call MESSAGE,"Finalizing target directory")
$(call per-package-rsync,$(sort $(PACKAGES)),target,$(TARGET_DIR))
$(foreach hook,$(TARGET_FINALIZE_HOOKS),$($(hook))$(sep))
The per-package-rsync call creates the global $(TARGET_DIR) from the
per-package $(TARGET_DIR). Then, we call the TARGET_FINALIZE_HOOKS.
One of the TARGET_FINALIZE_HOOKS, PURGE_LOCALES, remove locales that
are not desired by the user. It does so using a loop with the
$(wildcard ...) function.
However, the $(wildcard ...) function is expanded at the moment the
rule is evaluated. And with per-package directory, at the time the
rule is evaluated, the global $(TARGET_DIR) is empty, so $(wildcard
...) will return nothing. It is indeed only after the call to
per-package-rsync that the TARGET_DIR will be populated.
This commit fixes that by moving away from $(wildcard ...) and use a
shell test instead, since we are anyway in big block of shell code.
With this, locales are properly purged again when
BR2_PER_PACKAGE_DIRECTORIES=y.
Fixes: c4e6d5c8be ("core: implement per-package SDK and target")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- make the style look like the code around (no space in front of ;)
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This provides generic functions for Qt5 qmake based packages. It will
make it possible to remove lots of redefinition of
QT5_xxx_{CONFIGURE|BUILD|INSTALL_STAGING}_CMDS. Additionally it
provides a generic target install method which will make most of the
package specific commands obsolete.
This is done by re-running the install step of the qmake generated
Makefile with the package build directory prepended (to the
staging/host path). Even though this does create lengthy pathes it
allows for easy separation of the staging files from the host destined
files by just omitting the resulting BUILD_DIR+HOST_DIR path from the
following rsync call to the real target folder. The cleanup of many
files we dont want in target is deferred to the target-finalize
step. In addition to what's being removed already, we also have to
cleanup some Qt5 specific files (prl) and the documentation directory.
This approach was chosen over copying all files recorded in the pkg-files-list
after some discussion which Thomas Petazzoni summed up:
"We don't yet use pkg-files-list really as part of the build
process anywhere, I feel a bit more comfortable at this point with what
Andreas is proposing."
Thanks to this infrastructure, it will be possible to get rid of the
many conditional install commands because qmake already takes care of
this when generating the Makefile install targets with the given or
autodetected configure options of each package.
However, custom install steps may have to remain in cases where a
particular Buildroot option has no corresponding setting in the
packages configuration options.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Several users of rolling-release distributions have been reporting on
IRC that Buildroot is broken now that they have switched to the newly
released make 4.3.
It turns out that the constructs we use to generated and include the
internal br2-external related fragments is no longer working with
make-4.3.
Indeed, an upstream bug report [0] seems to imply that it so far was
working by chance. There has been no further feedback, whether this is
really considered a fix for a previous ill-defined behaviour, or an
actual regression...
In the meantime, we add a workaround, suggested in that same bug report,
that fixes the issue for make 4.3, and that should not break on older
make versions either (verified on all relevant versions: from 3.81,
3.82, 4.0, 4.1, and 4.2).
[0] https://savannah.gnu.org/bugs/?57676
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Mircea Gliga <mgliga@bitdefender.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The comment "Check files that are touched by more than one package"
was previously located right before the calls to the check-uniq-files
script. However, this script and the logic calling it have been
removed in commit 2496189a42 ("core:
drop check-uniq-files"), so the comment no longer makes any sense:
let's drop it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The current solution used to collect the list of files installed by
packages does not work for top-level parallel build. Indeed, we rely
on a file created after the installation of the previous package to
build the list of files installed by the current package.
This works well when packages are built sequentially, but badly fails
when using top-level parallel build.
More specifically, top-level parallel build can fail with:
comm: /home/thomas/buildroot/output/build/.files-list-host.new: No such file or directory
Because that file has been removed concurrently by the build process
of another package.
This commit reworks the logic in a very straight-forward way. Before
the installation of each package, we store the list of files that are
already installed and store it in the package build directory. After
the installation of each package, we store again that list of files,
calculate the difference with the before file, and store that as the
list of files installed by that package, still in the package build
directory.
At the end of the build, in target-finalize we collect all the
collected information into the global package file lists, that
continue to be installed in the same location as before, with the same
name.
There are however some differences:
(1) The files are no longer ordered in build order, but by alphabetic
ordering of packages. Indeed, "build order" no longer makes any
sense in the context of top-level parallel build.
(2) Some files which were incorrectly tracked are no longer
tracked. For example, the toolchain package is a target package,
but it installs files in $(HOST_DIR). In the previous logic, the
files installed by the toolchain package in $(HOST_DIR) were
incorrectly affected to the next host package that was installed
after the toolchain package. With our new logic, those files are
no longer tracked at all. To fix this, we would have to change
the logic to scan HOST_DIR/TARGET_DIR/STAGING_DIR for all
installation steps, not just for the install-host, install-target
and install-staging steps respecitively. But the result was
already incorrect anyway, and therefore this should be fixed
separately.
Note that the check_bin_arch hook needs to be adjusted: it was using
the global package-file-list.txt file, but this file is now created
only at the very end of the build. So instead, we use the current
package .file-list.txt file to know which packages have been installed
by the current package in $(TARGET_DIR).
Fixes:
http://autobuild.buildroot.net/results/4e60fa31b1cd08bc7fdf9c5dd3a3f4941e029ba3/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 509db3b88a added calls to (parts of) the instrumentation steps.
However, those calls are echoed, unlike the other places where we call
them (in the package infra).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Create the staging symlink the same way as the host symlink. This means
using a make dependency rather than recreating it every time.
In coreutils versions below 8.27, re-creation of symbolic links was not
atomic. This means that there is a period in time where the existing link is
removed, before the new one is created. In coreutils 8.27 this was fixed,
see [1]. Note that CentOS 7 ships with coreutils 8.22.
In the following scenario, this is a problem:
- an application is compiled using the sysroot prepared by Buildroot and
links against Xenomai userspace libraries, but its build process is steered
from outside of Buildroot
- to know the correct flags, the application makefile uses the 'xeno-config'
file to request them, and passes DESTDIR=/buildroot/output/staging
- the xeno-config responds with flags based on the path
'/buildroot/output/staging/...'
- while the application build is ongoing, a 'make' happens in Buildroot,
causing the 'staging' symlink to be recreated (even though it already
existed)
- when exactly at this time, the application calls the compiler with -I
flags pointing to output/staging, the build fails with:
-I/buildroot/output/staging/usr/include/xenomai/mercury: Error: ^ is not a directory
-I/buildroot/output/staging/usr/include/xenomai: Error: ^ is not a directory
-I/buildroot/output/staging/usr/include/xenomai/xenomai: Error: ^ is not a directory
-I/buildroot/output/staging/usr/include/xenomai/psos: Error: ^ is not a directory
Failed: ** ^ *
Work around this problem by only creating the staging symlink once, similar
to how the host symlink (if any) is created.
See also commit d0f4f95e39 which changed the
way these symlinks are made. The reasoning in this commit is to move away
from the 'dirs' target.
[1] 376967889e
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The package instrumentation step 'step_pkg_size' is populating the files:
output/build/packages-file-list.txt
output/build/packages-file-list-staging.txt
output/build/packages-file-list-host.txt
by comparing the list of files before and after installation of a package,
with some clever tricks to detect changes to existing files etc.
As an optimization, instead of gathering this list before and after each
package, where the 'after-state' of one package is the same as the
'before-state' of the next package, only the 'after-state' is used and
is shared between packages.
This works fine, except at the end of the build, as explained next.
In the target-finalize step, many files will be touched. For example, files
like /etc/hosts, /etc/os-release, but also all object files that are
stripped, and all files touched by post-build scripts or created by rootfs
overlays. This means that the 'after-state' of the last package does not
reflect the actual situation after target-finalize is run.
For a single complete build this poses no problem. But, if one incrementally
rebuilds a package after the initial build, e.g. with 'make foo-rebuild',
then all changes that happened in target-finalize at the end of the initial
build (the 'after-state' of the last package built) will be detected as
changes caused by the rebuild of package foo. As a result, all these files
will incorrectly be treated as 'owned' by package foo.
Correct this situation by capturing a new state at the end of
target-finalize, so that the 'before-state' of an incremental build will be
correct.
Note: the reasoning above talks about packages-file-list.txt and
target-finalize, but also applies to
packages-file-list-staging.txt/staging-finalize and
packages-file-list-host.txt/host-finalize.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With per-package folder support, top-level parallel build becomes
safe, so we can enclose the .NOTPARALLEL statement in a
!BR2_PER_PACKAGE_DIRECTORIES condition.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit implements the core of the move to per-package SDK and
target directories. The main idea is that instead of having a global
output/host and output/target in which all packages install files, we
switch to per-package host and target directories, that only contain
their explicit dependencies.
There are two main benefits:
- Packages will now see only the dependencies they explicitly list in
their <pkg>_DEPENDENCIES variable, and the recursive dependencies
thereof.
- We can support top-level parallel build properly, because a package
only "sees" its own host directory and target directory, isolated
from the build of other packages that can happen in parallel.
It works as follows:
- A new output/per-package/ directory is created, which will contain
one sub-directory per package, and inside it, a "host" directory
and a "target" directory:
output/per-package/busybox/target
output/per-package/busybox/host
output/per-package/host-fakeroot/target
output/per-package/host-fakeroot/host
This output/per-package/ directory is PER_PACKAGE_DIR.
- The global TARGET_DIR and HOST_DIR variable now automatically point
to the per-package directory when PKG is defined. So whenever a
package references $(HOST_DIR) or $(TARGET_DIR) in its build
process, it effectively references the per-package host/target
directories. Note that STAGING_DIR is a sub-dir of HOST_DIR, so it
is handled as well.
- Of course, packages have dependencies, so those dependencies must
be installed in the per-package host and target directories. To do
so, we simply rsync (using hard links to save space and time) the
host and target directories of the direct dependencies of the
package to the current package host and target directories.
We only need to take care of direct dependencies (and not
recursively all dependencies), because we accumulate into those
per-package host and target directories the files installed by the
dependencies. Note that this only works because we make the
assumption that one package does *not* overwrite files installed by
another package.
This is done for "extract dependencies" at the beginning of the
extract step, and for "normal dependencies" at the beginning of the
configure step.
This is basically enough to make per-package SDK and target work. The
only gotcha is that at the end of the build, output/target and
output/host are empty, which means that:
- The filesystem image creation code cannot work.
- We don't have a SDK to build code outside of Buildroot.
In order to fix this, this commit extends the target-finalize step so
that it starts by populating output/target and output/host by
rsync-ing into them the target and host directories of all packages
listed in the $(PACKAGES) variable. It is necessary to do this
sequentially in the target-finalize step and not in each
package. Doing it in package installation means that it can be done in
parallel. In that case, there is a chance that two rsyncs are creating
the same hardlink or directory at the same time, which makes one of
them fail.
This change to per-package directories has an impact on the RPATH
built into the host binaries, as those RPATH now point to various
per-package host directories, and no longer to the global host
directory. We do not try to rewrite such RPATHs during the build as
having such RPATHs is perfectly fine, but we still need to handle two
fallouts from this change:
- The check-host-rpath script, which verifies at the end of each
package installation that it has the appropriate RPATH, is modified
to understand that a RPATH to $(PER_PACKAGE_DIR)/<pkg>/host/lib is
a correct RPAT.
- The fix-rpath script, which mungles the RPATH mainly for the SDK
preparation, is modified to rewrite the RPATH to not point to
per-package directories. Indeed the patchelf --make-rpath-relative
call only works if the RPATH points to the ROOTDIR passed as
argument, and this ROOTDIR is the global host directory. Rewriting
the RPATH to not point to per-package host directories prior to
this is an easy solution to this issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Back a few years ago, when we were starting to think about top-level
parallel build, we were not sure how to deal with packages that
installed the same files, so we wanted to catch the situation to assess
how prevalent that was, before we decided what to do and how to address
it.
However, the trend nowadays is that packages will install in a
per-package target/ (and staging/ and host/), and the final directories
will be assembled in a reproducible (alphabetical) order, so if two
packages install the same file, the last one will win (as is currently
the case).
Besides, check-uniq-files reports loads of spurious errors when packages
get reinstalled (e.g. during development).
Finally, check-uniq-files is the only script called during the build,
that is written in python.
So, get rid of check-uniq-files.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we group packages that contribute less then 1%, into the
"Other" category.
However, in some cases, there can be a lot of very comparatively small
packages, and they may not exceed this limit, and so only the "Others"
category would be displayed, which is not nice.
Conversely, if there are a lot of packages, most of which only so
slightly exceeding this limit, then we get all of them in the graph,
which is not nice either.
Add a way for the developers to pass a different cut-off limit. As for
the dependency graph which has BR2_GRAPH_DEPS_OPTS, add the environment
variable BR2_GRAPH_SIZE_OPTS to carry those extra option (in preparation
for more to come, later).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[Arnout:
- remove empty base class definition from Config;
- use parser.error instead of ValueError for invalid argument.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When no filesystem is enabled, the $BINARIES_DIR is not created. Yet,
the post-image scripts are still run. When those want to generate an
image in there, they may fail as the dirctory does not exist (it did
exist before we started applying preparatory changes for top-level
parallel build, so scripts got to rely on that assumption).
Do in target-post-image as we do in the sdk rule: create the directory
before calling the scripts.
Signed-off-by: Brent Generous <bgenerous@impinj.com>
[yann.morin.1998@free.fr:
- create the directory before calling the scripts
- don't drop the creation in the sdk rule
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This rule was added back in 9429e7b698 (core: introduce an intermediate
rule before the configurators) when the kconfig-side br2-external file
was generated separately from the Makefile-side one.
Now that they are generated together very early in the Makefile, we no
longer need this intermediate rule. Drop it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
[Peter: also drop outdated reference in the manual]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When we introduced support for multiple br2-external trees, we
introduced two files, one on the Makefile side, needed very early,
and one on the kconfig side, needed later in the configuration
process. We naturally introduced a two-step generation, as it looked
like the simplest and most obvious way.
But now, we are on the verge of generating more files on the kconfig
side, and it does not make sense to add even more steps to generate
them.
And even better yet, we can generate both the Makefile-side and
kconfig-side files at the same time, in fact.
Make it so.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that all the br2-external generated files are named after the same
pattern, it gets easier to remove them all using a glob.
Furthermore, we're on the verge of introducing more such generated
files, so removing them at one fell swoop will be simpler too.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the two (all of them!) br2-external related files are generated
in the same location, it makes sense they are named after the same
pattern.
When initial support for (then single) br2-external trees was added back
in a4239f7fd1 (core: introduce the BR2_EXTERNAL variable), it was not
clear-cut why that file was not named with a br2 prefix.
So rename it now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, that file is generated rather late in the configuration
process, so BUILD_DIR is known (and exists) by then.
We're soon to generate that file much earlier, at a point where
BUILD_DIR is not yet known, so we have two options:
1- declare BUILD_DIR earlier;
2- generate the file in an already-known location.
We go with the second solution, as we're already generating a
br2-external related file in BASE_DIR, so we can as well generate all
br2-external files in the same place.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
