This reverts commit 1d7b6f65c6.
The fsync patch tries to add the same lines already added by
busybox-1.16.0-compat.patch, so skip it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Squashfs depends on host-zlib, so we add this as a dependency. As
host-zlib is installed in $(HOST_DIR), we must pass $(HOST_CFLAGS) and
$(HOST_LDFLAGS).
Unfortunately, if we pass CFLAGS=$(HOST_CFLAGS), we override the
CFLAGS defined in the Makefile, and the build fails. Therefore, we
borrow a patch from OpenEmbedded to fix this problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
cramfs depends on host-zlib, so it must be built prior to cramfs.
Moreover, we need to pass the HOST_CFLAGS and HOST_LDFLAGS variables,
otherwise it doesn't find zlib in $(HOST_DIR).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
First, the build was failing with:
cd .. && /bin/sh /home/test/brbuild/build/cgicc-3.2.7/support/missing --run autoheader
/home/test/brbuild/build/cgicc-3.2.7/support/missing: line 52: autoheader: command not found
WARNING: `autoheader' is missing on your system. You should only need it if
you modified `acconfig.h' or `configure.ac'. You might want
to install the `Autoconf' and `GNU m4' packages. Grab them
from any GNU archive site.
That was because the PATH doesn't contain $(HOST_DIR)/usr/bin. So we
pass $(TARGET_MAKE_ENV) when calling make.
Then, the build was failing because of the crappy configure.ac and
doc/Makefile.am this project has. configure.ac checks if doxygen is
available, and if it isn't, it sets DOXYGEN to /bin/echo. Then,
doc/Makefile.am does:
DATE=`date '+%-d %b %Y'` VERSION=$(VERSION) $(DOXYGEN) Doxyfile
cp $(IMAGES) cgicc-doc.css html
mv html/index.html html/index.html.bak
When DOXYGEN=/bin/echo, then the first line does not generate anything
in html/, and the third line fails.
Therefore, we add a patch that allows to pass a --disable-doc option,
which removes the check for Doxygen. If --enable-doc is passed, then
the configure script fails if Doxygen isn't found (but in the
Buildroot case, we always pass --disable-doc to avoid the doxygen
dependency).
We also take this opportunity to bump the version of libcgicc, and to
remove a patch that is no longer needed due to this version bump.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Closes#1183.
When gmp/mpfr is needed for the host (E.G. when using an internal toolchain),
the host-lib{gmp,mpfr}-source targets weren't added to HOST_SOURCE, so
make source / external-deps didn't handle them.
Notice that we have the same issue with the new host package support,
there we should probably use HOST_<package>_DEPENDENCIES for -source
dependencies.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Without intltool, configuration fails with:
checking for intltool >= 0.35.0... ./configure: line 28714: intltool-update: command not found
found
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Depending on the gcc version, the gcc include and lib directories have
changed. We include support for gcc 4.4 by copy/pasting the support
for gcc 4.3. Locations don't seem to have changed between 4.3 and
4.4. This allows the syslimits.h fixup to succeed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Before the autotools conversion, xfont_font-util was installed in
staging, so keep this.
However, the current way of handling xfont_font-util is ugly. The
post-install.sh script removes the binaries compiled for the target
from the staging directory and replaces them by symbolic links to
utils installed on the host (making the incorrect assumption that they
are available).
It looks like xfont_font-util needs to be built for the host (using
the new infrastructure for host autotools package). This is certainly
post-2010.02 though.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
madplay was failing to build with errors such as :
audio_alsa.o: In function `config':
audio_alsa.c:(.text+0x200): undefined reference to `snd_pcm_hw_params_set_rate_near@ALSA_0.9'
audio_alsa.c:(.text+0x25c): undefined reference to `snd_pcm_hw_params_set_buffer_time_near@ALSA_0.9'
audio_alsa.c:(.text+0x284): undefined reference to `snd_pcm_hw_params_get_buffer_size@ALSA_0.9'
audio_alsa.c:(.text+0x2a4): undefined reference to `snd_pcm_hw_params_set_period_time_near@ALSA_0.9'
audio_alsa.c:(.text+0x2d4): undefined reference to `snd_pcm_hw_params_get_period_size@ALSA_0.9'
The ALSA library uses symbol versioning by default, to handle ABI
changes. However, since uClibc doesn't seem to support symbol
versioning, we disable this when building the ALSA library by passing
--without-versioned.
However, madplay relies on the old ALSA ABI, so even without symbol
versioning, references to versioned symbols are generated (functions
with the same name, but different API, exist in the old and new API).
The easiest solution is to switch madplay to the new API. This is done
thanks to a patch written by Micha Nelissen <micha@neli.hopto.org> and
available at http://article.gmane.org/gmane.comp.audio.mad.devel/729.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This module got disabled when pango was upgraded to 1.19.3. But now,
the module builds fine. And even more: disabling it breaks the build
when modules are compiled statically into pango.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The gtk-doc.m4 file is now installed globally (see the automake
package), so there's no point in including a pango-specific patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is an old package. It is currently broken, and probably nobody
uses it. So let's get rid of it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This fixes the following build failure:
checking lex output file root...
configure: error: cannot find output from flex; giving up
Caused by the fact that a host version of flex is missing
in $(HOST_DIR).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump all the linux kernel version to the latest available and add a
help note for all of them with the release data and status.
The long-term stable 2.6.27 kernel is really out of date (.27 -> .45).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Probing the kernel version uses command substitution to capture the
result of a make command. If the top-level make is run with -C, the
sub-make will print entering/leaving directory messages, mucking up the
output we're trying to capture.
Invoke the sub-make with --no-print-directory so we get clean output.
Signed-off-by: Cameron Hutchison <cam@camh.ch>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In uClibc, NPTL support does not exist in the 0.9.30 branch, that we
are using in Buildroot. It is only available in the uClibc daily
snapshot, extracted from uClibc master branch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In uClibc, NPTL support does not exist in the 0.9.30 branch, that we
are using in Buildroot. It is only available in the uClibc daily
snapshot, extracted from uClibc master branch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
I could have created a !dependency on !BR2_PTHREADS_OLD, but that
wouldn't work with external toolchains. So, let's just add a notice in
the help message of WebKit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The mplayer configure script was failing with:
Checking for iconv program ... no
No working iconv program found, use
--charset=UTF-8 to continue anyway.
If you also have problems with iconv library functions use --charset=noconv.
Messages in the GTK-2 interface will be broken then.
Therefore, we pass --charset=UTF-8 instead of --charset=US-ASCII.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
--without-html-dir doesn't work. It leads libsoup ./configure script
to think that HTML_DIR is "no", which leads to the installation of the
documentation in $(STAGING_DIR)no (yes, with the "no" suffix at the
end). The issue is that --with-html-dir is not an enable/disable type
of option, it's an option that only allows to pass a PATH for
documentation installation.
As we don't want the documentation to be installed in this odd
$(STAGING_DIR)no directory, we simply get rid of this option.
See 7e62e8ec72 for another instance of
the same problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch fixes different problems:
* The autogen script of Webkit did not find autoconf, automake and
aclocal since they are not installed in the host, but in
$(HOST_DIR). Therefore we pass HOST_CONFIGURE_OPTS to autogen.sh so
that the PATH is correct.
* The autogen script was complaining that gtk-doc.make could not be
find. As compiling gtk-doc completely is a pain (depends on
Docbook), we just include gtk-doc.make into package/webkit/, and
copy it to the source directory.
* The autogen script was complaining about macros used in
gtk-doc.make that did not exist. This is because aclocal was not
run with $(STAGING_DIR)/usr/share/aclocal/ in the include
path. Therefore, we fix ACLOCAL_FLAGS of Webkit's autogen script
before running it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make sure that we touch the target so that the target is newer than
the .compiled stamp file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After being copied to target/, touch dmsetup so that its date is newer
than the .built stamp file in lvm2 source directory. This prevents
make from re-installing dmsetup every time.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adding real targets to $(TARGETS) doesn't work, since they are
prefixed __real_tgt by the main Makefile. 'make' then always thinks
that these targets aren't up-to-date, and re-generate them every time.
Therefore, we switch dosfstools to the more common way of handling
packages, with a phony target added to $(TARGETS), this phony target
depending on real targets.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Real targets should not depend on phony targets, otherwise they get
rebuilt everytime.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Real targets should not depend on phony targets, otherwise they get
rebuilt every time.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
matchbox-desktop fails to build because it tries to read
/usr/lib/libxcb.la, which doesn't exist on a very basic system with no
development files instead. The buildroot-libtool.patch must therefore
be applied.
Unfortunately, matchbox doesn't yet use the autotools infrastructure,
so we have to manually apply the patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
