This commit doesn't touch infra packages.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since a while, the semantic of BR2_PREFER_STATIC_LIB has been changed
from "prefer static libraries when possible" to "use only static
libraries". The former semantic didn't make much sense, since the user
had absolutely no control/idea of which package would use static
libraries, and which packages would not. Therefore, for quite some
time, we have been starting to enforce that BR2_PREFER_STATIC_LIB
should really build everything with static libraries.
As a consequence, this patch renames BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS, and adjust the Config.in option accordingly.
This also helps preparing the addition of other options to select
shared, shared+static or just static.
Note that we have verified that this commit can be reproduced by
simply doing a global rename of BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS plus adding BR2_PREFER_STATIC_LIB to Config.in.legacy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A lot of packages ignored BR2_ENABLE_DEBUG. This patch simplifies the handling of
this option by adding the corresponding configure option to the global Makefile
for target packages.
For host packages --disable-debug is added to the global Makefile.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The correct capitalised form appears to be "BusyBox" rather than "Busybox";
fix all references to the latter form. (Most such references occur in the
manual and in commentary in package makefiles.)
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tab instead of spaces
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When a package A depends on config option B and toolchain option C, then
the comment that is given when C is not fulfilled should also depend on B.
For example:
config BR2_PACKAGE_A
depends on BR2_B
depends on BR2_LARGEFILE
depends on BR2_WCHAR
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
This comment should actually be:
comment "A needs a toolchain w/ largefile, wchar"
depends on BR2_B
depends on !BR2_LARGEFILE || !BR2_WCHAR
or if possible (typically when B is a package config option declared in that
same Config.in file):
if BR2_B
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
[other config options depending on B]
endif
Otherwise, the comment would be visible even though the other dependencies
are not met.
This patch adds such missing dependencies, and changes existing such
dependencies from
depends on BR2_BASE_DEP && !BR2_TOOLCHAIN_USES_GLIBC
to
depends on BR2_BASE_DEP
depends on !BR2_TOOLCHAIN_USES_GLIBC
so that (positive) base dependencies are separate from the (negative)
toolchain dependencies. This strategy makes it easier to write such comments
(because one can simply copy the base dependency from the actual package
config option), but also avoids complex and long boolean expressions.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(untested)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch lines up the comments in Config.in files that clarify which
toolchain options the package depends on.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: leave change xz tarball format to not end up with circular deps]
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As reported in bug #6164 when using busybox iproute2 openvpn can fail to
locate the 'ip' utility.
This was correct until busybox 1.21.0 was released since it changed the
location of /bin/ip to /sbin/ip (what iproute2 proper does).
So adjust the ip path accordingly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Our default (busybox) rc.S implementation requires init scripts to be
named S??*, so rename the openvpn one to S60openvpn (E.G. after network).
At the same time remove the deprecated check-if-custom-skeleton-provided-file
and just always install the init script. People can always fixup/remove
it in their post-build script if needed.
Also name the init script source the same as the destination file name in
TARGET_DIR for consistency.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Toolchain IPv6 support isn't optional any more.
New PolarSSL backend besides the usual OpenSSL one.
New small binary option, reduces binary file size ~100 KiB depending on
target architecture.
Removed no crypto option - it still requires some SSL library headers
and it's pointless anyway, after all we're talking about a VPN solution
here.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This sets paths to ifconfig, route, netstat and ip
in the target root filesystem.
Otherwise the paths leak from the host and may not
match those on the target.
Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thanks to the pkgparentdir and pkgname functions, we can rewrite the
AUTOTARGETS macro in a way that avoids the need for each package to
repeat its name and the directory in which it is present.
[Peter: pkgdir->pkgparentdir]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
tmpdir issue was already fixed in 2.2.1 version, so
remove the patch
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The selection of linuxthreads, linuxthreads old or NPTL doesn't make a
lot of sense for external toolchains. So, instead, we :
* Introduce an hidden BR2_TOOLCHAIN_HAS_THREADS option, which must be
selected by toolchain specific options when thread support is
available. Package needing to test thread support should use this
option.
* Move the none/linuxthreads/linuxthreads old/NPTL selection to
Buildroot internal toolchain configuration.
* Add an option in external toolchain to tell if thread support is
available or not in the external toolchain. We assume that glibc
without threads is not possible, as Ulrich Drepper said in
http://sourceware.org/ml/libc-alpha/2005-08/msg00091.html
ffmpeg, dmalloc and openvpn are fixed to use the new
BR2_TOOLCHAIN_HAS_THREADS option. For openvpn, --enable-threads=posix
is no longer used, as the configure script doesn't even understand
this option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A C library will have been built by the toolchain makefiles, so there is no
need for packages to explicitly depend on uclibc.
Signed-off-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
they should be configured with --prefix=/usr and we then need to use
make DESTDIR=$(STAGING_DIR) install to get things installed into the
staging directory. The current situation for many packages, which use
--prefix=$(STAGING_DIR) results in the staging_dir paths getting compiled
into the binary itself.
This also adds in a pile of libtool fixups. Between broken pkgconfig,
broken libtool handling, and broken --prefix settings, its a wonder
things have worked as well as they have up till now.
-Erik