In its default configuration, owserver opens a TCP socket on the 'lo'
interface. However, in some situations, the 'lo' interface may not yet
be up until S40network is started. This causes owserver not to start its
TCP socket, which makes it impossible for the owfs client to connect to
it.
In addition, owserver may have avahi integration.
Therefore, delay the start of owserver and owfs until after S40network
and S50avahi-daemon.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Remove third and fourth patches (already in version)
- Add hash for license file
- Remove --without-foomatic options (not available anymore)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also removed upstreamed patch 0001-examples-ges-ui-fix-some-gtk2-ism.patch.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In addition:
- Allow gst1-libav to use the system ffmpeg, as 1.16.0 is compatible with
ffmpeg 4.x.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Group these patches because of several changes to the plugin packages.
Changes:
- Remove upstreamed patches:
- 0001-fdkaacenc-Remove-MODE_2_1.patch
- 0002-fdkaacdec-Use-WAV-channel-mapping-instead-of-interle.patch
- Add BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_COMPOSITOR to Config.in.legacy as
this plugin is moved to gst1-plugins-base.
- Add BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_IQA to Config.in.legacy as this the
plugin is now removed.
- Add BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_OPENCV to Config.in.legacy as the
plugin now requires opencv3 with the bgsegm opencv_contrib module, which is
not in Buildroot.
- Add BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_STEREO to Config.in.legacy as this
plugin is merged with the audiofx plugin in gst1-plugins-good.
- Add BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_VCD to Config.in.legacy as this
plugin is removed.
- Remove COPYING.LIB from gst-plugins-base mk file and hash file as it no
longer exists.
- Add BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_COMPOSITOR to gst1-plugins-base.mk
- Add BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_OVERLAYCOMPOSITION to
gst1-plugins-base.
- Add mjpegtools to the dependencies of
BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_MPEG2ENC
- Remove BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_IQA because it now depends on
the package dssim which isn't available in Buildroot.
- Remove upstream patch
0001-gstrtspconnection-Security-loophole-making-heap-over.patch
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also remove upstreamed patch 0001-gstconfig.h.in-initial-RISC-V-support.patch.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove both patches since they've been upstreamed.
Add host-pkgconf to MINICOM_DEPENDENCIES and remove:
`MINICOM_CONF_ENV = PKG_CONFIG=/bin/false` since now pkg-config is
needed to build.
Shortlog follows:
git shortlog --no-merges 19ab49422f3431102c31fea01549121385113f80..
Adam Lackorzynski (9):
Update project URL
Updated translations
Updated translations: pl and sv
Translations: regen update
Update danish translation
Update of danish translation
Update README
Formatting fix
More friendly mbslength test
Fabrice Fontaine (1):
src/Makefile.am: fix ascii-xfr link with lintl
Giulio Benetti (2):
TODO: remove Utf8 bug.
sysdep1: check if RS485 is support before setting its parameters
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch makes nfs server component optional. This is useful when
only client tools are needed instead of the full nfs server.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The removal of unnecessary files is currently broken by the fact that
the rm command is executed from the buildroot directory and not the
target directory.
This patch fixes the problem changing to target directory before
removing files.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Add start, stop and restart/reload options, following the logic used
in other init scripts (e.g. S01syslogd).
- Do nothing if /etc/radvd.conf does not exist instead of printing an
error message. It is valid to install radvd without a configuration
file. The daemon may be started later by another service with a
configuration created at run-time.
- Print an error message if the kernel does not support IPv6 forwarding,
which is required by radvd.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Very similar to orangepi-zero, except that the board has a 16MB SPI flash, a
2nd ethernet port is provided through a Realtek RTL8152 and wifi is provided
through a Realtek RTL8189FTV (no mainline driver, not supported).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
GCC 9 is being stricter about passing null string pointers
to printf-like functions.
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove third patch (already in version)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Remove second and third patches (already in version)
- Add an upstream patch to fix build with glibc < 2.5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch is not needed since version 0.10.8 and:
0f50f8c3db
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove all patches (already in version)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
After upstream review, I found that the third patch is not needed, just
doing an autoreconf fix the linking issue with -lintl
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Triggering a single defconfig or runtime test job can be handy:
- when adding or changing a defconfig;
- when adding or changing a runtime test case;
- when fixing some bug on a use case tested by a runtime test case.
Currently there are 3 subsets of jobs that can easily be triggered by
pushing a temporary branch with specific suffix:
- to trigger only the check-* jobs:
$ git push gitlab HEAD:<name> # currently 4 jobs
- to trigger all defconfigs and all check-* jobs:
$ git push gitlab HEAD:<name>-defconfigs # currently 197 jobs
- to trigger all runtime tests and all check-* jobs:
$ git push gitlab HEAD:<name>-runtime-tests # currently 118 jobs
When the user wants to trigger a single defconfig or runtime test job,
hand-editing the .gitlab-ci.yml and creating a temporary commit are
currently needed.
Add 2 more subsets that can be triggered based on the name of the
branch pushed.
- to trigger one defconfig job:
$ git push gitlab HEAD:<name>-<defconfig name> # currently 1 jobs
- to trigger one runtime job:
$ git push gitlab HEAD:<name>-<test case name> # currently 1 jobs
The check-* jobs are fast, so there is no need to add a per job trigger
for them. Also, they are anyway triggered with every push already.
While adding those new triggers, use the full name of the job as suffix.
This leads to large branch names:
$ git push gitlab HEAD:test1-tests.toolchain.test_external.TestExternalToolchainBuildrootuClibc
$ git push gitlab HEAD:test2-olimex_a20_olinuxino_lime_legacy_defconfig
But those branches are temporary, and this way the user doesn't need to
think much, just copy and paste the job name as suffix.
The hidden keys that now hold the commonalities between jobs does not
hold only a script anymore, so rename then from *_script to *_base.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Arnout: squash two patches]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Rename 0002-install-don-t-use-ln-relative.patch to
0001-install-don-t-use-ln-relative.patch as there is two 0002-xxx
patches
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
