Commit Graph

105 Commits

Author SHA1 Message Date
Zakharov Vlad
41a077d2b1 uboot: Use "mdbtrick" target when building elf for ARC
By default position independent executables (PIE) are generated
when building U-Boot elf target. MetaWare debugger doesn't support
PIE (position-independent executable).

In order to allow MDB load and run U-Boot elf, we need to do a
special trick, called "mdbtrick".

This special build target is used to fake generated U-Boot elf by:
    1. Reset PIE flag in ELF header
    2. Strip all debug information from elf

Signed-off-by: Zakharov Vlad <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-06-12 21:40:19 +02:00
Peter Korsgaard
577021e81b Merge branch 'next'
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-06-01 17:55:16 +02:00
Cam Hutchison
0542bb79e8 uboot: Support multiple environment source files
Allow multiple file names to be listed in
BR2_TARGET_UBOOT_ENVIMAGE_SOURCE, concatenating them in the order
listed.

This allows the bulk of the environment to be shared across multiple
boards using a common environment file with board-specific values
supplied in a secondary environment source file.

Signed-off-by: Cam Hutchison <camh@xdna.net>
[Thomas: adjust indentation in the .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-05-31 22:59:35 +02:00
Julien Boibessot
0dca644e44 boot/uboot: fix missing host-openssl for i.MX28 target
Building an U-Boot image for the i.MX23 or i.MX28 target requires to run the
bootloaders 'mxsimage' tool on the host. As mxsimage needs unconditionally
OpenSSL, building U-Boot for those targets fails if it is not available on
the host:

tools/mxsimage.c:18:25: fatal error: openssl/evp.h: No such file or directory
  #include <openssl/evp.h>

Add the required dependency 'host-openssl' to all the different U-Boot image
types used to build a bootloader image for an i.MX23/i.MX28 target.

Also pass HOST_CFLAGS and HOST_LDFLAGS to the U-Boot build process so the right
-I/-L options will be used to find OpenSSL.

Ported from the Armadeus project:
https://sourceforge.net/p/armadeus/mailman/message/33595402/

Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
[Jörg: port to recent Buildroot version]
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-05-25 17:09:22 +02:00
Fabio Estevam
316986e336 boot/uboot: bump to version 2016.05
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-05-16 21:14:09 +02:00
Peter Korsgaard
2d0bc89ebf uboot: ensure u-boot-dtb.img gets built if enabled
u-boot-dtb.img only gets built by default (all target) if
CONFIG_OF_SEPARATE _AND_ CONFIG_SPL_FRAMEWORK are enabled.

Certain SoCs (E.G. Action Semi S500) use a proprietary first level
bootloader instead of u-boot SPL, but still use u-boot-dtb.img as the first
level bootloader parses the uImage header for size/loadaddr.

Ensure u-boot-dtb.img gets built if enabled by explicitly listing it as a
u-boot make target (next to all) to support such setups.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-05-05 11:31:39 +02:00
Pauli Sundberg
1a807b4a89 boot/uboot: Add custom Subversion repository support for the package
Signed-off-by: Pauli Sundberg <susundberg@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-04-05 22:27:17 +02:00
Jan Viktorin
39a91b2826 boot/uboot: compute CRC on SPLs for Altera SoC FPGA
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
[Thomas: add Altera in the option name and description, drop reference
to Go being needed and to Maxime Hadjinlian's version of mkpimage
since a C version is now used.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-03-22 23:43:21 +01:00
Gustavo Zacarias
21b25d28fc uboot: remove deprecated BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR option
It's been deprecated for a year now so remove it.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-03-15 22:47:47 +01:00
Peter Korsgaard
2790748a11 boot/uboot: bump to version 2016.03
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-03-14 23:45:45 +01:00
Jerzy Grzegorek
24ba69015c uboot: indentation cleanup
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-03-09 23:01:18 +01:00
Thomas De Schampheleire
cd81c98171 uboot: remove unused helper function insert_define
Commit 16b8e813c8 removed all remaining users
of helper function insert_define.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-01-18 10:10:50 +01:00
Jörg Krause
37e18851fa boot/uboot: bump to version 2016.01
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-01-17 22:59:48 +01:00
Erico Nunes
a6a40578fc uboot: add COPY_OLD_LICENSE_FILE fix to rsync hook
make legal-info breaks when using an older u-boot version in local.mk
with OVERRIDE_SRCDIR, due to the reorganization of license files which
happened in u-boot v2013.10.
This issue had already been fixed in Buildroot for the regular use of
old u-boot versions (non-local.mk).
This patch adds the same fix to UBOOT_POST_RSYNC_HOOKS so that it also
covers the local.mk case.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-12-29 12:24:19 +01:00
Thomas Petazzoni
d7afb1d29f boot/uboot: handle generated defconfigs
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-12-22 22:52:47 +01:00
Arnout Vandecappelle
9a730a92a3 uboot: fix ARCH for i386 and x86_64
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-11-16 21:16:37 +01:00
Jörg Krause
b6c286833f uboot: fix hash for 2015.10 version
Commit bf2bd11321 bumped U-Boot to version
2015.10 but forgot to update the hash as well.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2015-10-28 23:40:17 +01:00
Peter Korsgaard
bf2bd11321 uboot: bump version to 2015.10
Keep the 2015.07 patch so things still work for people using 2015.07.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2015-10-25 21:50:41 +01:00
Ronak Desai
4730df02cf uboot: arm64 arch build support
For a 64bit arm architecture, Buildroot uses arm64 terminology and
from the top-level Makefile KERNEL_ARCH is set to arm64 which is then
passed to the uboot build.  This causes a compilation issue as uboot
uses the top-level system architecture as it's $(ARCH).  So
arch/$(ARCH)/Makefile doesn't work with arm64 unless we adjust the
arch.

[Thomas:
 - rewrap commit message text.
 - simplify comment in the code.]

Signed-off-by: Ronak Desai <ronak.desai@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-10-12 21:59:44 +02:00
Thomas Petazzoni
76f2230d2c u-boot: add an option to indicate that DTC is needed
Some U-Boot configurations require the Device Tree compiler to be
available, so we need to depend on host-dtc (example configuration:
zynq_zed).

However, we don't want to build it unconditionally, since the vast
majority of U-Boot configurations don't need it (and host-dtc itself
has a bunch of dependencies).

So, we simply add a Config.in option that allows users to indicate
whether their U-Boot needs DTC or not, and depend on host-dtc if this
option is enabled.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2015-10-04 20:17:35 +02:00
Arnout Vandecappelle
fbdf831708 uboot: remove now-redundant ccache handling
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2015-10-04 18:22:20 +02:00
Alexey Brodkin
aacf0ae9e3 u-boot: 2015.07 - fix creation of .config
Due to recent changes in U-Boot, see
http://git.denx.de/?p=u-boot.git;a=commit;h=a26cd04920dc069fd6e91abb785426cf6c29f45f
re-creation of .config from defconfig by "make oldconfig" happened
incorrectly.

Default prompt for target selection was set as No that lead to missing platform
selection by automated scripts like that:
------------------>8------------------
"yes "" | make oldconfig" on defconfig
------------------>8------------------

And that lead to build failure:
------------------>8------------------
$ make
scripts/kconfig/conf --silentoldconfig Kconfig
  CHK     include/config.h
  UPD     include/config.h
  GEN     include/autoconf.mk
In file included from ./include/common.h:18:0:
include/config.h:5:22: fatal error: configs/.h: No such file or directory
 #include <configs/.h>
                      ^
compilation terminated.
scripts/Makefile.autoconf:72: recipe for target 'include/autoconf.mk' failed
make[1]: *** [include/autoconf.mk] Error 1
------------------>8------------------

This patch reverts mentioned change making possible to build U-Boot
2015.07 in Buildroot.

Note there's a probability that this particular patch won't make its way
in upstream U-Boot and better solution will be found there. But for now
we need to fix U-Boot building in Buildroot anyways.

Hopefully for the next release this patch won't be necessary.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2015-08-30 22:40:35 +02:00
Thomas Petazzoni
58b2598a3d uboot: mark Freescale i.MX28 specific formats as such
It's rather unclear that uboot.sb, uboot.sd and uboot.nand are
Freescale i.MX28 specific, so let's make that clear in the prompt of
each option, like we do for the Marvell-specific uboot.kwb.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-07-19 14:50:01 +02:00
Jörg Krause
1e0f7ebef9 boot/uboot: add support for the kconfig infrastructure
With the patchset "kconfig: turnaround into single .config"
[http://lists.denx.de/pipermail/u-boot/2015-February/205490.html]
U-Boot switched to a single .config file for board configuration. This
allows us to use the kconfig-package infrastructure.

For providing backward compatibility with older U-Boot version a user
choice between the new Kconfig and the legacy build system is
introduced.

[Thomas:
  - make use of the legacy build system the default, to not break
    existing configurations.
  - add some comments in the code checking all the configuration
    options, in order to hopefully make it a bit clearer.]

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-07-19 14:36:30 +02:00
Jan Viktorin
aabe23f861 boot/uboot: Generate BOOT.BIN file when building for Xilinx Zynq
This commit integrates generation of a bootable image
for Xilinx Zynq. The generation is independent on Xilinx
flow and utilizes the host-zynq-boot-bin package. The only
required step is to generate a proper U-Boot SPL (instead
of the FSBL).

The SPL generation might work when providing the working
ps7_init.c file to U-Boot. However, from U-Boot 2015.07
a set of generic ps7_init.c files is included and used to
build the U-Boot SPL for various boards. The ps7_init.c file
has been released under GNU/GPL license for this purpose.
For details, see

http://lists.denx.de/pipermail/u-boot/2015-April/210664.html

The SPL searchs for u-boot-dtb.img when booting so we
enforce using of the BR2_TARGET_UBOOT_FORMAT_DTB_IMG format.

[Thomas: remove select of BR2_PACKAGE_HOST_ZYNQ_BOOT_BIN, since this
option no longer exists.]

Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-07-18 23:04:44 +02:00
Jörg Krause
e13609ddf4 boot/uboot: bump to version 2015.07
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-07-16 23:39:19 +02:00
Jan Viktorin
920b50b7e0 boot/uboot: Add support for dtb.img format
Allow to generate u-boot-dtb.img. This is the same format
as u-boot.img, however, it contains a built-in device-tree.
This file is being loaded by the U-Boot SPL.

Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-07-15 00:06:04 +02:00
Jörg Krause
4dd4b9ace5 boot/uboot: add support for i.MX28 NAND format
Allow to generate 'u-boot.nand', Freescale i.MX28 BootStream format (.sb)
with a header for booting from NAND flash.

There are two possibilities when preparing an image writable to NAND flash:
1) The NAND was not written at all yet or the BCB (Boot Control Blocks) is
   broken. In this case, the NAND image 'u-boot.nand' needs to written.
2) The NAND flash was already written with a good BCB. This applies after
   'u-boot.nand' was correctly written. There is no need to write the BCB
   again. In this case, the bootloader can be upgraded by writing 'u-boot.sb'.

To satisfy both cases 'u-boot.nand' as well as the make target 'u-boot.sb' are
copied to the binaries directory.

mxsboot for NAND images needs all three parameters typed in as integer values
(hex values do not work). The default values choosen are typical sizes for a
NAND flash.

For more information see:
http://www.denx-cs.de/doku/?q=m28evkrunuboot

Commit Note: This patch is based on top of
"[PATCH v2 1/2] boot/uboot: add support for i.MX28 SD format"
http://patchwork.ozlabs.org/patch/453116/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-07-11 13:48:42 +02:00
Gustavo Zacarias
16b8e813c8 boot/uboot: remove deprecated network settings option
It's been deprecated since the 2014.05 release, so a year has passed.
Add legacy info as well to raise a warning when it's used.

[Peter: Remove entire config.h fixup handling]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2015-06-02 22:57:16 +02:00
Yann E. MORIN
ee2509fccf boot/uboot: do not check hash for custom versions
For custom tarballs, it's quite obvious we can not check hashes.

For custom versions, that's not so obvious. One might think we could
have hashes for all the official releases, but that's not possible: if
the user uses a released version of Buildroot (say 2015.05) much later
in the future, and wants to use the then-released 2038.02 U-Boot. It now
seems pretty obvious that Buildroot 2015.02 can't know the hash for
U-Boot 2038.02.

So, disable checking the hash for custom tarballs and custom versions.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Vincent Stehle <vincent.stehle@laposte.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-05-02 15:11:01 +02:00
Thomas Petazzoni
fa6289bb1a packages: refactor checks using BR_BUILDING
Instead of manually testing MAKECMDGOALS, use the newly introduced
BR_BUILDING variable to know if we're building or not.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2015-04-26 21:43:25 +02:00
Frank Hunleth
14f1a83ee3 uboot: deprecate BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR
Users should use BR2_TARGET_UBOOT_PATCH instead.

Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-19 11:06:51 +02:00
Frank Hunleth
3e3fef39e7 uboot: add support for patch files and URLs
The existing u-boot patch option only allowed directories to be
specified. This adds support for URLs using similar code as found
in linux/linux.mk. Local files are also handled now.

This change is useful for Intel Edison support, so that Intel's u-boot
patch can be downloaded rather than stored in the Buildroot source tree.

Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-19 11:06:23 +02:00
Jörg Krause
d72192ce5a boot/uboot: add hash file
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-19 10:01:11 +02:00
Jörg Krause
426b03059f boot/uboot: bump to version 2015.04
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-19 10:00:17 +02:00
Masahiro Yamada
5b686a0674 Fix typos in comment blocks
[Thomas: fix issues noticed by Arnout:
  - Rewrap the linux/Config.in paragraph
  - Revert the "is a toolchain dependency" -> "has a toolchain
    dependency" change from pkg-generic.mk, as the original was
    correct.]

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-08 22:44:43 +02:00
Thomas Petazzoni
0eba4759fa packages: apply custom patches using *.patch instead of <pkg>-*.patch
Several packages have some logic to apply custom patches that existed
before the BR2_GLOBAL_PATCH_DIR mechanism: at91bootstrap,
at91bootstrap3, barebox, uboot and linux. Currently, the logic of
those packages to apply custom patches is to match
<package-name>-*.patch, which is not consistent with what we've done
for patches stored in the package directory, and for patches stored in
BR2_GLOBAL_PATCH_DIR: in such cases, we simply apply *.patch.

Therefore, for consistency reasons, this commit changes these packages
to also apply *.patch.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2015-04-06 11:04:59 +02:00
Vincent Stehlé
1536362eff boot/uboot: add support for i.MX28 SD format
Allow to generate u-boot.sd, Freescale i.MX28 SB format with a header for
booting from an SD card.

U-boot includes an mxsboot tool to generate this format, starting from
v2011.12.

See u-boot doc/README.mxs (or doc/README.mx28_common before 2013.07).

[Arnout:
 - Wrap Config.in help text at 72 columns.
 - Remove v from U-Boot version specifier.
 - Refer to different README name before 2013.07.
 - Depend on host-elftosb
 - Add comment to clarify sb -> sd conversion.]

Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Tested-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-03 17:25:20 +02:00
Jörg Krause
283a4ba996 boot/uboot: bump to version 2015.01
Though U-Boot introduced a Kconfig and Kbuild build system with version
2014.10 the old build commands with <board>_config are still supported.

Tested with BR2_TARGET_UBOOT_BOARDNAME="m28evk"

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2015-01-31 07:19:47 +01:00
Jörg Krause
6781302444 boot/uboot: Remove obsolete CONFIG_NOSOFTFLOAT flag
This flag seems to be obsolete. There is no piece of code in the U-Boot source
tree referencing CONFIG_NOSOFTFLOAT.

Unfortunatly the use of this flag is not documented here. Maybe it's about this
old workaround:
http://lists.denx.de/pipermail/u-boot/2007-March/020282.html

However, this patch has been declined:
http://www.denx.de/wiki/view/U-Boot/PatchStatus?rev=1.27

Since no other configure options are used, remove also UBOOT_CONFIGURE_OPTS.

Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-01-10 16:38:37 +01:00
Jörg Krause
143119c0ef boot/uboot: bump to version 2014.10
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-12-21 23:24:09 +01:00
Jörg Krause
84f1a90e1e boot/uboot/uboot.mk: Strip quotes from BR2_TARGET_UBOOT_SPL_NAME
Remove the quotes from the BR2_TARGET_UBOOT_SPL_NAME variable.

Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-12-21 23:22:57 +01:00
Jörg Krause
b819a5fcc0 boot/uboot/Config.in: Fix BR2_TARGET_UBOOT_SPL_NAME
Point out that the SPL name is an image name.

Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-12-21 23:22:37 +01:00
Jörg Krause
5912863890 boot/uboot/Config.in: Fix BR2_TARGET_UBOOT_SPL
Building an SPL image depends on the board configuration. This option
does not enable the SPL build, but only copies the built SPL image to
the binary images folder. The current help text is misleading.

Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-12-21 23:22:14 +01:00
Fabio Porcedda
1586ce3a3d apply-patches.sh: Use the "APPLY_PATCHES" variable to call the script
To easy up adding optional parameters when calling the
"apply-patches.sh" add and use the "APPLY_PATCHES" variable to execute
the script.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-10-25 01:31:32 +02:00
Thomas De Schampheleire
f268f7131b .mk files: bulk aligment and whitespace cleanup of assignments
The Buildroot coding style defines one space around make assignments and
does not align the assignment symbols.

This patch does a bulk fix of offending packages. The package
infrastructures (or more in general assignments to calculated variable
names, like $(2)_FOO) are not touched.

Alignment of line continuation characters (\) is kept as-is.

The sed command used to do this replacement is:
find * -name "*.mk" | xargs sed -i \
    -e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*$#\1 \2#'
    -e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\]\+\)$#\1 \2 \3#'
    -e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\ \t]\+\s*\\\)\s*$#\1 \2 \3#'
    -e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\(\s*\\\)#\1 \2\3#'

Brief explanation of this command:
    ^\([A-Z0-9a-z_]\+\)     a regular variable at the beginning of the line
    \([?:+]\?=\)            any assignment character =, :=, ?=, +=
    \([^\\]\+\)             any string not containing a line continuation
    \([^\\ \t]\+\s*\\\)     string, optional whitespace, followed by a
                            line continuation character
    \(\s*\\\)               optional whitespace, followed by a line
                            continuation character

Hence, the first subexpression handles empty assignments, the second
handles regular assignments, the third handles regular assignments with
line continuation, and the fourth empty assignments with line
continuation.

This expression was tested on following test text: (initial tab not
included)

	FOO     = spaces before
	FOO     =   spaces before and after
	FOO	= tab before
	FOO	  = tab and spaces before
	FOO =	tab after
	FOO =	   tab and spaces after
	FOO =   	spaces and tab after
	FOO =    \
	FOO = bar \
	FOO = bar space    \
	FOO   =		   \
	GENIMAGE_DEPENDENCIES   = host-pkgconf libconfuse
	FOO     += spaces before
	FOO     ?=   spaces before and after
	FOO     :=
	FOO     =
	FOO	=
	FOO	  =
	FOO =
	   $(MAKE1) CROSS_COMPILE=$(TARGET_CROSS) -C
	AT91BOOTSTRAP3_DEFCONFIG = \
	AXEL_DISABLE_I18N=--i18n=0

After this bulk change, following manual fixups were done:
- fix line continuation alignment in cegui06 and spice (the sed
  expression leaves the number of whitespace between the value and line
  continuation character intact, but the whitespace before that could have
  changed, causing misalignment.
- qt5base was reverted, as this package uses extensive alignment which
  actually makes the code more readable.

Finally, the end result was manually reviewed.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Cc: Yann E. Morin <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-10-07 15:00:28 +02:00
Gustavo Zacarias
4c29280557 uboot: bump to version 2014.07
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-07-16 20:39:40 +02:00
Peter Korsgaard
cb9aac7539 u-boot: use spl/u-boot-spl.bin as default spl file
Ever since u-boot introduced the generic spl support in u-boot 2012.10, the
default spl output file has been spl/u-boot-spl.bin and not u-boot-spl.bin,
so use that as a more sane default value.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-05-29 23:16:32 +02:00
Thomas Petazzoni
1ed01c9aaa uboot: check various configuration parameters and bail out if empty
Following the issues reported by Jerry <g4@novadsp.com>, it appears
that there are a number of U-Boot configuration variables we are not
checking properly, leaving users with weird behavior at build time.

This commit extends the existing U-Boot checks to verify that when a
custom version, custom tarball, or custom Git or Mercurial
repositories are selected, the appropriate fields are not empty in the
configuration.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-05-20 23:51:37 +02:00
Alexey Brodkin
eda1dc683f uboot: bump to version 2014.04
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>

Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-04-26 11:27:06 +02:00