The external toolchain wrapper sets sysroot etc. to an absolute path.
By changing this to a relative path, it is possible to move the host
directory to a different location and still have a working build
system.
This only works for a downloaded external toolchain. For a pre-installed
external toolchain, it is possible to move the host directory to a
different location, but not the external toolchain directory (it does work
if the external toolchain directory lies within the host directory). For
an internal or crosstool-ng toolchain, there is no wrapper so updating the
sysroot path should be done in a different way.
See http://lists.busybox.net/pipermail/buildroot/2012-February/050371.html
for information about others things to do to make the host directory
relocatable.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The following changes LDFLAGS from -static to --static if building
with BR2_PREFER_STATIC_LIB so that various components actually build
statically.
Libtool interpret -static as linking statically with libraries that will not
be installed to the libdir; you have to pass it -all-static to force static
linking. Or, pass --static, which libtool passes on blindly to gcc. gcc
and (GNU) ld both interpret --static the same as -static (although this
isn't documented).
Signed-off-by: Andy Kennedy <andy.kennedy@adtran.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Many configure scripts support an option like --disable-doc, --disable-docs
or --disable-documentation. Pass all of these to configure.
In addition, not all Xorg packages accept the --disable-xxx. Instead they
look for xmlto and/or fop and build documentation if they exist. For host
packages, this may lead to build errors because /usr/bin/xmlto uses libxml2
and we set LD_LIBRARY_PATH to point to $(HOST_DIR)/lib, which may contain
a libxml2 as well. So it's essential to disable xmlto for host packages.
Also some whitespace cleanup.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The longcalls option allows calls across a greater range of addresses.
This option may degrade both code size and performance, but
the linker can generally optimize away the unnecessary overhead
when a call ends up within range
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Strip libthread_db the same as any other library, but strip libpthread
with --strip-debug. See the relevant mailing list discussion [1] for
additional details.
[1] http://lists.busybox.net/pipermail/buildroot/2012-October/060126.html
Signed-off-by: Richard Braun <rbraun@sceen.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Give the path to the realdelf binary for the target, similar to how we
do for the other tools.
[Peter: reworded]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When compiling for the same architecture and libc as the host,
GNU_TARGET_NAME and GNU_HOST_NAME are equal. configure scripts use
these to detect cross-compilation, and will decide that we're doing
native compilation. This may trigger running of executables,
which fail because of missing libraries in the host environment.
To solve this, set the vendor part in GNU_TARGET_NAME to buildroot.
This problem exists for instance in xserver_xorg-server on x86_64.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
With the replacement of GENTARGETS by package-generic, there is a risk
that local packages don't work anymore without any indication of what
is wrong. Therefore, generate an error message if the GENTARGETS,
AUTOTARGETS or CMAKETARGETS macro is still used.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
-mno-abicalls is an old kludge for some (probably) old issue.
Remove it since it's actually harmful, static busybox doesn't build with
it for a modern-ish toolchain (defaults as of this commit, uClibc
0.9.33.2 + gcc 4.5.4).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Practically speaking, MIPS has three useful ABIs:
* o32 is for 32-bits CPUs, or 64-bit CPUs running only a 32-bit subset
of the instruction set.
* n32 is for 64-bits CPUs only. It has 32-bits pointers and long
integers.
* n64 is for 64-bits CPUs only. It has 64-bits pointers and long
integers.
See http://www.linux-mips.org/wiki/MIPS_ABI_History and
http://www.linux-mips.org/wiki/WhatsWrongWithO32N32N64 for more
details.
So, this commit reworks the Buildroot MIPS support by:
* Add separate mips64/mips64el top-level architectures.
* Renaming the n32 ABI option to BR2_MIPS_NABI32, for consistency
with BR2_MIPS_OABI32.
* Renaming the n64 ABI option to BR2_MIPS_NABI64, for consistency
with BR2_MIPS_OABI32.
* Make the n32 and n64 ABI selections select the BR2_ARCH_IS_64,
since those ABIs are valid on 64-bits CPUs only.
* Removing the o64 ABI, which is practicaly never used.
* Removing the "none" ABI, which really doesn't make sense.
* Introduce the mips64 and mips64el architecture names when a 64-bits
MIPS ABI is choosen. This will fix build issue like
http://autobuild.buildroot.org/results/9b8c5ea86c953a89e85e7b67e9221de41773f652/build-end.log
where gmp was confused by the fact of having a 32 bits architecture
(detected by the mips- architecture part of the tuple) but 64 bits
integer size when compiling.
* Adjust the uclibc.mk logic to support the new mips64/mips64el
architecture names, and take into account the renaming of the ABI
options.
This has been build tested by generating Buildroot toolchains and
compiling a few packages for MIPS o32, MIPS n32 and MIPS n64.
This work is originally based on prior work done by Gustavo Zacarias.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The -fPIC breaks the purgatory of kexec (= the code that passes command-line
arguments to the kernel): kexec doesn't know how to handle the GOT and PLT
relocation entries.
There is also no reason at all to pass -fPIC. Shared libraries that require
it will add it to their local Makefiles, and normal executables have no
business with -fPIC (plus it adds overhead...).
The -fPIC was added by Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
in commit 8027784c. That commit adds sysroot parameters to CFLAGS.
There is no explanation why -fPIC is also added for x86_64.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When BR2_JLEVEL is 0, set PARALLEL_JOBS to double the number of CPUs
detected. This allows one to more or less fully utilize the host
system without manually tuning the configuration.
Also make 0 the default value for BR2_JLEVEL.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
BR2_JLEVEL currently is expanded directly in $(MAKE), and used in
invocations of other build software (e.g. ct-ng). However, we are
going to allow "0" to be a meaningful value for BR2_JLEVEL, which
won't work for these uses. Given that it is not permissible to modify
BR2_-prefixed variables in Makefiles, we need an intermediate
variable.
Define PARALLEL_JOBS to $(BR2_JLEVEL), and use the former in MAKE's
definition. Uses of BR2_JLEVEL throughout the rest of the tree to be
adjusted similarly in follow-up patches.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of providing two variables, make GNU_TARGET_NAME give the real
target name, and remove REAL_GNU_TARGET_NAME altogether.
Signed-off-by: Richard Braun <rbraun@sceen.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Re-integrate in gcc-uclibc-4.x.mk things from
toolchain/gcc/Makefile.in that were completely gcc-specific. There was
no reason to pull that when building with other backends than the
internal one.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some packages don't automatically enable IPv6 support if not configured
with --disable-ipv6, or use AC_TRY_RUN which doesn't work when cross
compiling (like curl), so explicitly configure with --enable-ipv6.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A host package that uses AUTORECONF (such as host-libglib2)
may end up running './config.status --recheck'. This will
call the configure script with the environment variables
set in HOST_MAKE_ENV. If PKG_CONFIG_SYSROOT_DIR is missing
this will cause the hardcoded sysroot dir take effect leading
to wrong paths.
See commit 22acade2ec which works around this problem by
fiddling with the generated .pc file. This commit becomes
obsolete with this fix.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Cc: Daniel Mack <zonque@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the ability for buildroot to build an SPE ABI enabled toolchain.
This is mandatory for e500v1/v2 cores since they don't support classic
FPU mode as the e500mc does.
Useful for Freescale's PowerQUICC III and single/dual-core QorIQ
line of processors.
The new TARGET_ABI variable is used rather than TARGET_CFLAGS for
uclibc's UCLIBC_EXTRA_CFLAGS to avoid breakish CFLAGS leaking in, a
good example being -mthumb for ARM.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Allow the user to specify additional options for the target LDFLAGS.
I use this to pass the -te500v2 option to the linker, when using the
CodeSourcery toolchain for PowerPC. This chooses the correct CRT for e500 hard
float. Otherwise I get errors like
undefined reference to `_save32gpr_31'
undefined reference to `_rest32gpr_31_x'
at final link time.
[Peter: fixup, use qstrip]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For target packages, depending on BR2_PREFER_STATIC_LIB, add the
correct combination of --{enable,disable}-{shared,static} flags to
./configure calls.
* When BR2_PREFER_STATIC_LIB is enabled, we pass --enable-static
--disable-shared.
* When BR2_PREFER_STATIC_LIB is disabled, we pass --enable-static
--enable-shared. We enable static libraries since they can still be
useful to statically link applications against some libraries
(sometimes it is useful for size reasons). Static libraries are
anyway only installed in the STAGING_DIR, so it doesn't increase in
any way the size of the TARGET_DIR.
For host packages, always pass --enable-shared and --disable-static.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that we use a wrapper for external toolchains (and internal ones
default to the correct setting), we no longer need to explicitly pass
sysroot/march/mtune/mabi/floating point mode in TARGET_CFLAGS.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add a simple toolchain wrapper for external toolchains, which forces the
correct sysroot/march/mtune/floating point options needed to use it
with buildroot.
With this in place the external toolchain behaves similar to the internal
ones, and the special handling can be removed. This also means that the
toolchain is usable outside buildroot without having to pass any special
compiler flags.
Also adjust the downloadable external toolchain support to install under
HOST_DIR so it can be used after the temporary build files are removed.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 7e3e8ec040 (CFLAGS/LDFLAGS: don't add -I / -L args for STAGING_DIR)
exposed a lingering libtool problem.
Unless instructed otherwise (using -L) libtool will search its built in
system path for libraries, and use those instead if found. The default
search path is '/usr/lib, /lib, /usr/local/lib', which is no good for
cross compilation.
Fix it by setting the system search path to the empty string, effectively
disabling this feature.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that we use sysroot for all toolchains, the explicit -I / -L arguments
in CFLAGS / LDFLAGS aren't needed anymore (And having them makes the build
quite noisy for certain packages as STAGING_DIR/include normally doesn't
exist).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Only prefix the external toolchain calls with its absolute path if
BR2_TOOLCHAIN_EXTERNAL_PATH is set, otherwise just assume it will
be available in the path.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A few packages (like xlib_xtrans) install their .pc files here, and
upstream pkg-config defaults to searching both /usr/lib/pkgconfig and
/usr/share/pkgconfig, so add it as well.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Similar to the --with-pc-path option. It works just like the existing
PKG_CONFIG_SYSROOT_DIR environment variable, but compiled in.
The environment variable overrides this default setting if set.
This way we don't need to pass PKG_CONFIG_SYSROOT_DIR in the environment
when building for the target, and it is easier to reuse pkg-config outside
BR (E.G. for the SDK) without having to setup special environment
variables.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The CMAKETARGETS infrastructure makes adding CMake-based packages to
Buildroot easy. It uses the same set of variables as the autotools
infrastructure, except for autoreconf and libtool stuff which is not
needed. Usage: just call CMAKETARGETS instead of AUTOTARGETS.
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A CMake toolchain-file makes it easy to develop CMake-based packages
outside of Buildroot. Just give the toolchain-file to CMake via the
-DCMAKE_TOOLCHAIN_FILE=... option.
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As pointed out on the list, using sysroot rather than sys-root is less
confusing, as this is how it is referred to in the GCC manual.
So rather than changing BR, patch ct-ng to use sysroot instead.
The next ct-ng release will use 'sysroot' as well by default.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Simplifies code and helps us when we add SDK support in the future.
With this we no longer need to copy headers/libraries to STAGING_DIR either.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The name of the sysroot directory is arbitrary, but as ct-ng uses sys-root,
let's use that as well for consistency.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Convert binutils to a proper autotargets package
* Add version 2.21 and drop version 2.17
* Hook up packaged binutils for target gcc
* Build tools are on HOST_DIR now so change it
* Move cross/host gcc to HOST_DIR
* Drop kludge from commit 3c77bab2ee
This is fixed in the next commit "gcc: install copies of libgcc,
libstdc++ and libgcj to the sysroot" - tested for arm & x86_64
targets.
* TARGET_CROSS now pointed to HOST_DIR too
[Peter: Config.in tweaks]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove VIS optimization, it's for sparc64 and it's gone.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Drop the BR2_STAGING_DIR option
* Hardcode STAGING_DIR to $(HOST_DIR)/usr/TUPLE/sysroot
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Convert sstrip to a proper gentargets package
* Use openwrt svn version, it's basically the same one we used
* Change the hooks from old toolchain/sstrip to new package/sstrip
* Drop the old toolchain/sstrip directory
* sstrip for the target is now in Package -> Development
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of having BR2_GCC_CROSS_CXX and BR2_INSTALL_LIBSTDCPP, with
BR2_GCC_CROSS_CXX not being visible (and therefore being useless),
let's just keep BR2_INSTALL_LIBSTDCPP to enable C++ in the toolchain
and install C++ libraries on the target.
We also take that opportunity to make BR2_INSTALL_LIBSTDCPP an hidden
option, which is selected by an option in Buildroot toolchain support
or an option in External toolchain support, just as we did for other
toolchain features.
Some work definitely remains to be done :
- The name BR2_INSTALL_LIBSTDCPP is ugly, but we keep it for the
moment in order to avoid changing all packages.
- We should clarify the other language-related options (Fortran,
Java, Objective-C, etc.).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of letting the user define all the details of his external
toolchain, we define a set of profiles for well-known external
toolchains (CodeSourcery ones only at the moment, can easily be
extended with other toolchains).
Once a profile has been choosen, the user is offered the choice of
either letting Buildroot download and install the external toolchain,
or (as before) to tell Buildroot where the toolchain is installed on
the system.
We of course provide a "custom profile", through which the user can
configure Buildroot to use a custom external toolchain for which no
profile is available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* ccache is now a normal package (both for the host and the target).
* ccache option is now part of the "Build options" menu. It will
automatically build ccache for the host before building anything,
and will use it to cache builds for both host compilations and
target compilations.
* bump ccache to 3.1.3
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
