libitm (transactional memory) needs SPARC V9+ ISA, otherwise when
enabling C++ the toolchain fails to build:
/tmp/cclQ6hrD.s: Assembler messages:
/tmp/cclQ6hrD.s:1261: Error: Architecture mismatch on "rd".
/tmp/cclQ6hrD.s:1261: (Requires v9|v9a|v9b; requested architecture is
v8.)
Makefile:517: recipe for target 'beginend.lo' failed
make[5]: *** [beginend.lo] Error 1
So disable it for our current (v8, leon3) support.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the BR2_GCC_TARGET_TUNE value is always empty now, there is no
longer a point in using it in the gcc package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To easy up adding optional parameters when calling the
"apply-patches.sh" add and use the "APPLY_PATCHES" variable to execute
the script.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed during the dev days. It is broken for uClibc/musl and
architectures not using mainline gcc, so it has only very limited
usefulness.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we have switched to a two steps gcc build process that uses
only gcc-initial and gcc-final, we can get rid of the gcc-intermediate
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the trailing slash is stripped from $($(PKG)_SITE) by pkg-generic.mk:
$(call DOWNLOAD,$($(PKG)_SITE:/=)/$($(PKG)_SOURCE))
so it is redundant.
This patch removes it from $(PKG)_SITE variable for BR consistency.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The gcc graphite optimisations such as loop-interchange, blocking
and loop-flattening, also known as graphite are an optional feature of
gcc that is very well supported since about gcc version 4.5.
This patch adds support for graphite for the toolchain as an optional
flag for versions 4.8 onwards as an optional flag, that is disabled by
default.
Signed-off-by: Steve Thomas <scjthm@live.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A build issue affects libsanitizer on musl toolchains, even with
previous versions of gcc such as 4.8.x, so we disable building
libsanitizer when working with musl.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Somehow the 'else' part got dropped from commit 3f82e9dbcd (use default gcc
4.8.2 for microblaze), breaking download for "normal" architectures.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream gcc 4.8.2 works fine for microblaze, no need for
Xilinx Git.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libsanitizer requires wordexp() support which we lack in our current
default uClibc configurations (and it's fat & big).
Hence disable it when the toolchain is uClibc-based.
It only affects gcc 4.9+ since it's default on now for supported
platforms.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add gcc snapshot versions dependency on host-flex and host-bison
(done as suggested by Thomas Petazzoni [1]).
Fixes gcc snapshot version 4.9-20140309 compile failure [2].
Tested the following buildroot configs
BR2_arm=y
BR2_cortex_a9=y
BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
BR2_BINUTILS_VERSION_2_24=y
BR2_GCC_VERSION_SNAP=y
BR2_GCC_SNAP_DATE="4.9-20140309"
and
BR2_arcle=y
For the ARC case disabled the BINUTILS_FROM_GIT host-flex and host-bison
dependency.
[1] http://lists.busybox.net/pipermail/buildroot/2014-March/092490.html
[2] http://lists.busybox.net/pipermail/buildroot/2014-March/092459.html
[Peter: simplify logic]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The github release mechanism only supports .tar.gz, hence the ugly
GCC_UNPACK variable.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While the generic package handler checks for a directory with patches
before starting apply-patches.sh, this is not the case for gcc: the
script is called, even if there is no directory with patches. This results
into a build failure, as apply-patches exits with error code 1 if the
directory doesn't exist.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The mudflap library is only useful if one uses the -fmudflap gcc
option to do more checks on pointers/arrays. This commit adds an
option to enable/disable mudflap support at the gcc level. By default,
it is disabled, which saves a little bit of build time compared to the
default of gcc which consists in enabling mudflap support.
Since mudflap is now disabled by default, and ensured to never be enabled
on platforms where it is not available, some gcc.mk code that was used to
disable mudflap in problematic configurations can be removed.
Whether -fmudflap is used when building is left to the user.
[Peter: tweak commit text, fix white space]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The HOST_GCC_CONFIGURE_SYMLINK creates a symbolic link
$(@D)/build/configure -> $(@D)/configure for each build step of
gcc. However, it was only using 'ln -s' and not 'ln -sf', which was
causing problems when doing 'make host-gcc-final-reconfigure' for
example, because the configure commands (including this macro) are
being re-executed, but the symbolic link already exists.
Changing this symbolic link creation to 'ln -sf' fixes this problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add host-elf2flt to the gcc common dependencies so we get it built after
binutils but before gcc/uclibc since it's required for all packages and
in some uClibc configuration scenarios.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Make 3.82 no longer sort the result of wildcards (see
http://comments.gmane.org/gmane.comp.gnu.make.bugs/4260). This may break
build reproducibility.
This patch sort results of wildcards to ensure reproducibility.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes a build issue with the avr32 toolchain:
http://jenkins.free-electrons.com/job/buildroot/config=atngw100_defconfig/104/
Invalid configuration `MAKEINFO=missing': machine `MAKEINFO=missing' not
recognized
Instead pass it in the environment of ./configure, similar to how it was
done originally in 62322acb2c (toolchain/gcc: disable makeinfo).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The documentation of older GCC versions (E.G. 4.3.x) contain constructs
that are no longer accepted by recent (5.x) versions of makeinfo, breaking
the build.
The documentation isn't really needed, and takes up extra space/build time,
so work around it by disabling documentation, like we had before the
conversion of the toolchain to the package infrastructure.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libmudflap doesn't build for a thumb(1) toolchain so disable it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This fixes multiple issues, including:
- 'operand out of range' errors (due to defaulting to
medium calls instead of short calls)
- library dependencies that were not being found
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Until now, we were using the default ARM instruction set, as used by
the toolchain: the 32 bits ARM instruction set for the internal
backend, and for external toolchain, whatever default was chosen when
the toolchain was generated.
This commit adds support for the Thumb2 instruction set. To do so, it:
* provides a menuconfig choice between ARM and Thumb2. The choice is
only shown when Thumb2 is supported, i.e on ARMv7-A CPUs.
* passes the --with-mode={arm,thumb} option when building gcc in the
internal backend. This tells the compiler which type of
instructions it should generate.
* passes the m{arm,thumb} option in the external toolchain
wrapper. ARM and Thumb2 code can freely be mixed together, so the
fact that the C library has been built either ARM or Thumb2 and
that the rest of the code is built Thumb2 or ARM is not a problem.
[Peter: fix empty BR2_GCC_TARGET_MODE check]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Buildroot already has the BR2_GCC_TARGET_{TUNE,ARCH,ABI,CPU} hidden
kconfig strings that allow per-architecture Config.in files to feed
the appropriate values of --with-{tune,arch,abi-cpu} when building
gcc, or the appropriate flags for the external toolchain wrapper.
This commit has two additional options:
BR2_GCC_TARGET_{FPU,FLOAT_ABI}, that allows to define the
--with-{fpu,float} gcc configure options for the internal backend, or
the -m{fpu,float-abi} options for the flags of the external toolchain
wrapper.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 6b48b48034 ("add a know to enable/disable building a shared
libgcc"), from october 2006, isn't really as to why a
BR2_GCC_SHARED_LIBGCC option was needed. However, now that gcc has
been converted to the package infrastructure, it causes problems
because the host packages are always being passed --enable-shared
--disable-static, so re-adding --disable-shared on top of that break
things.
Moreover, our tests indicate that both a shared *and* a static version
of libgcc are built, and that linking dynamically and statically a
program that uses libgcc_s gives correct results: dynamically linked
against libgcc_s in the first case, statically linked in the second
case.
Therefore, it appears that this option is no longer necessary, and
removing it has the advantage of fixing the builds of
qemu_mips64_malta_defconfig and qemu_sparc_ss10_defconfig, both of
which had BR2_GCC_SHARED_LIBGCC not enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Several sub-directories of the gcc code base are in fact not needed
for the Buildroot build: libjava/, libgo/ and gcc/testsuite/ being the
biggest ones. Avoiding their extraction saves quite a bit of disk
space, and compensates a bit the fact that we now extract three times
the gcc source code.
This requires changing the 100-uclibc-conf.patch to no longer patch
files from the libjava/ directory, since this directory is no longer
extracted.
[Peter: add comment about why this is done]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
