The installed kernel modules should have useless build cruft stripped out
of them. On my system, a default build went from a very unreasonable 30MB
to a normal 3MB (on disk) and from 14MB to 3MB when compressed due to the
info stored in the kernel modules alone.
[Peter: don't hardcode binutils strip specific options]
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Ensure host packages (dependencies of target packages) are also handled
by make source / make external-deps.
This has to be done a explicitly, as we don't list these in Kconfig,
and hence also not in a variable like TARGETS, so instead we have to
look at the <PKG>_DEPENDENCIES variables for each enabled package and
extract the host packages from there.
Host packages can in turn also have dependencies, so we have to follow
those as well. Ideally this should be done recursively, but as that's
pretty hard to do in make, it is limited to 1 level for now.
Finally, host packages share source files with target packages, so
pipe output of make external-deps through sort -u to ensure duplicates
are removed.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#2731
Bootloader and Linux kernel steps can add content to the rootfs, so ensure
the cleanup / postprocess steps are moved after those.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The configuration cache shared between packages, while being in
principle a nice idea to speed-up the configuration of packages by
avoiding repetitive identical checks, turned out to be unreliable due
to the subtle differences between similar but not identical checks in
different packages. After spending some time trying to fix those, we
concluded that supporting the shared configuration cache is definitely
too hard and too unreliable, and that we'd better get rid of it
altogether.
This patch therefore removes the shared configuration cache
infrastructure and usage.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It seems that target-specific variables don't mix with target rules.
Thanks to Yann for helping debugging the issue.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some packages use the buildroot version string (to set their own version
string). Computing the version string globally will makes it easy for
them to use it instead of re-computing it in every packages.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This re-instates writing the version string in .config headers, and no
longer provides it as a kconfig symbol in .config (it is now a variable
in the Makefile, and in the environment).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Move it down, users should not mess with it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Default HOST_CFLAGS to -O2, so host tools (like the cross compiler) are
built with optimization by default.
Based on a patch by Will Newton <will.newton@gmail.com>.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#2707
It's not only for kernel headers, and the kernel headers .mk file
isn't included for crosstool-ng toolchain, which broke linux/u-boot/..
builds.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
And all the infrastructure surrounding it. A broken sed implementation
is quite rare nowadays, as seen by the fact that the current host-sed
support has been broken for a while, so just get rid of it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The top-level Makefile can be executed in parallel, as it causes problems.
We can force make to be not parallel.
It's been reported many times, and recent discussions on IRC with kos_tom,
and user nick-named knee, led to this patch.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If building out-of-tree, add a Makefile wrapper that calls-out to the real
Makefile with proper args.
Avoids having to pass -C and O= every time we call make.
This is highly inspired from how the Linux kernel does it, and portions of
it have been used. We can't use exactly the same implementation as the
kernel does, because:
- the script writing the wrapper has been expunged of the few lines
that were too kernel-related: in buildroot we do not need the version
string in the wrapper, and we do not have a patchlevel version;
- "in-tree build" does not have the same meaning for the kernel and for
buildroot: for the kernel, $(O) point to the $(TOPDIR), while for
buildroot $(O) points to $(TOPDIR)/output.
For more complete explanations, see:
http://lists.busybox.net/pipermail/buildroot/2010-September/037815.html
[Peter: minor tweaks]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998 at anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The new DL_MODE variable dispatches between the various download
implementations of each method (Git, Subversion, Wget) to deal with the
normal download (default mode, 'DOWNLOAD'), the source-check
('SOURCE_CHECK') and to show the external dependencies for external-deps
('SHOW_EXTERNAL_DEPS').
For the latter, the legacy script wget-show-external-deps.sh is no
longer required as $(WGET) isn't called directly anymore but always
through the DOWNLOAD helper.
Signed-off-by: Maxime Petazzoni <maxime.petazzoni@bulix.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's not really necessary to differenciate the commands for checking out
or updating a repository. Only the path to the binary and eventual
top-level flags are useful to configure.
Signed-off-by: Maxime Petazzoni <maxime.petazzoni@bulix.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preparation for the re-work of the DOWNLOAD helper to support
multiple download methods and protocols, the spider feature used with
wget is removed for now until it is re-implemented on top of the new
download methods.
Signed-off-by: Maxime Petazzoni <maxime.petazzoni@bulix.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The previous commit has removed calls to conf_write_autoconf(), which
is the function that generates the KCONFIG_AUTOCONF,
KCONFIG_AUTOHEADER, KCONFIG_TRISTATE files and the split config (with
one file per config item). Therefore, those things were not generated
anymore before the build.
In order to get them generated before the build, we use the same
mechanism as the kernel: run a silentoldconfig when the .config file
is newer than the KCONFIG_AUTOCONF file.
In Buildroot, all those elements are not really used today, except the
split config which is used a little bit in the toolchain build, in a
try to make sure the toolchain gets rebuilt properly when the
configuration changes. It does not seem that this work has been
completed.
However, as we want to keep the same behaviour as previously, we have
to generate all those elements before starting the build.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
savedefconfig allows to create a minimal defconfig file from an
existing configuration. For example :
make O=/path/to/some/buildroot/build/directory savedefconfig
will generate a minimal 'defconfig' file in the main Buildroot source
directory.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of duplicating the definition of KCONFIG_AUTOCONFIG,
KCONFIG_AUTOHEADER and BUILDROOT_CONFIG, let's define them in a
COMMON_CONFIG_ENV variable, which is used by all the xconfig, gconfig,
menuconfig, nconfig, config, oldconfig, randconfig, allyesconfig,
allnoconfig, randpackageconfig, allyespackageconfig,
allnopackageconfig, defconfig, %_defconfig targets.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Our kconfig-to-buildroot2.patch hasn't been kept up to date with all
the changes made into package/config, and a single patch wasn't very
practical to maintain all our changes. Therefore, this commit adds a
package/config/patches directory, which contains a Quilt series of
patches that correspond to our modifications to the kconfig mechanism.
The huge kconfig-to-buildroot2.patch has been split into 16 smaller
patches. The purpose of some of the modifications has been clearly
identified, while some others were not identified.
The 16 patches together do match exactly the old
kconfig-to-buildroot2.patch. We have been very careful in making sure
that we wouldn't loose any of our modifications.
The only modifications made are :
* Instead of renaming the kernel Makefile to Makefile.kconfig and
naming the Buildroot Makefile just 'Makefile', we instead keep the
original package/config/Makefile from the kernel
scripts/kconfig/Makefile and name the Buildroot Makefile
package/config/Makefile.br. The main Buildroot Makefile is modified
accordingly.
* The documentation README.buildroot2 is updated to explain how to
upgrade to a newer version of scripts/kconfig.
* The kconfig-language.txt documentation is removed, as anybody can
easily find it in the kernel sources so there's no need to
duplicate it here.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There's no need to have a .defconfig, when you run make menuconfig,
make xconfig or anything else for the first time, it will just start
with the default configuration anyway. This is what the kernel does.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Recent versions of ldconfig require the directory /var/lib/ldconfig,
otherwise they bail out with an error. Moreover, having a
/etc/ld.so.conf file also avoids a warning.
In addition to this, we remove the redirection of stderr, so that
errors remain visible to the user.
Thanks to Baruch Siach, Andy Gibbs and Darcy Watkins for investigating
the issue and proposing solutions.
This fixes the build on recent distributions such as Fedora 13 or
Gentoo.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Based on patch by Will Wagner <will_wagner@carallon.com>.
Now that the .config is located in the output directory when O=<dir>
is used, we have to pass the O= option to make for
source/source-check/external-deps to get them to look in the right place
for the .config.
Fix it by introducing an EXTRAMAKEARGS variable and use it whenever we
call back into the toplevel Makefile.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Remove $(TARGET_DIR)/usr/share/aclocal from target-finalize when not
installing devfiles and
* Remove some (now) redundant cleanup from individual packages
Signed-off-by: Malte Starostik <m-starostik@versanet.de>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Including a bunch of Makefiles with wildcard makes it impossible to add
new toolchain backends. Avoid that by namely including needed files.
The external toolchain still needs to include all the toolchain/*/*.mk
sub-makefiles, as they are needed to build a toolchain that runs on the
target. It is to be noted that the cross-toolchain is not built in this
case, as the make-targets to build the cross-toolchain are not present
in the $(BASE_TARGETS) variable, which is later used to create the
dependency rules.
Also, the comment 'Explicit ordering' has been removed, as it is mis-
leading. It is make's responsibility to create the proper ordering based
on the dependency rules it finds in the Makefiles
Signed-off-by: Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The helper functions used for external toolchains may also be useful
to alternate toolchain backends (currently, the external toolchain is
the sole user).
Signed-off-by: Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit ed0d45fdd (Choose host/target ldconfig based on availability)
added a runtime check for a cross-ldconfig being available.
Unfortunately this checks runs too early (at package/Makefile.in parsing
time), so it always fails when using an internal toolchain as ldconfig
isn't built yet.
Fix it by moving the check to the only place it is used (target-finalize).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We now have for quite some time a configuration cache used to speed-up
the execution of ./configure scripts when compiling programs for the
target. This commit introduces a similar concept when Buildroot
compiles programs for the host.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We don't actually need to explicitly clean the kconfig stuff, as distclean
already removes the entire BUILD_DIR, but fix up the packag/config makefile
to do the right thing if make clean/distclean is called manually for
completeness.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch introduces a single, simple, infrastructure to build the
Linux kernel. The configuration is limited to :
* Kernel version: a fixed recent stable version, same as kernel
headers version (for internal toolchains only), custom stable
version, or custom tarball URL
* Kernel patch: either a local file, directory or an URL
* Kernel configuration: either the name of a defconfig or the
location of a custom configuration file
* Kernel image: either uImage, bzImage, zImage or vmlinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make sure we only pass O=<path> if we were originally called like that,
otherwise we might end up looking for the .config in the wrong place.
Likewise, when changing between using O= or not (or simply running
make <blah>_defconfig in a pristine source tree), we do end up having
a .config, but no .config.cmd. It isn't really critical so just continue
even if we couldn't read it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Support the GTK variant of the graphical kconfig configurator as an
alternative to the Qt3-based one.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Otherwise u-boot tools / kernel modules are only added to target AFTER
the filesystems are built.
Long term u-boot/kernel stuff should get splitted from target/device,
but this is the safest solution for now.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
GNU_HOST_NAME is referred more than 100 times in the tree, used 5
times during startup, and is relatively expensive to run - so make
it a simple expanded variable (:=) rather than recursively expanded
one (=).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
On my target rootfs it is installed documentation for:
atk, cairo, gdk, gdk-pixbuf, gio, glib, gobject, gtk, pango
It ocupies 34M of space. Configure option --disable-gtk-doc doesn't
prevent installation of it. So we should remove them manually if
documentation is disabled.
[Peter: also remove manual rm's from hal/libxml2/libglade]
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of asking the user about the GNU target suffix, just compute
it automatically from the other configuration options.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The definition of TOOLCHAIN_DIR is the same regardless of whether
external or internal toolchains are used. Moreover, move its
definition together with all the other *_DIR definitions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of having a configuration option BR2_GNU_BUILD_SUFFIX, let's
use config.guess to guess the build system type.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Until now, we had BR2_HAVE_MANPAGES, BR2_HAVE_INFOPAGES and
BR2_HAVE_DOCUMENTATION, but there's no need to have such a
fine-grained control over what documentation gets kept or not.
Therefore, just remove all the documentation (man pages, info pages
and documentation in $(TARGET_DIR)/usr/doc and
$(TARGET_DIR)/usr/share/doc) when BR2_HAVE_DOCUMENTATION is not set.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Strangely enough O is still passed to submakes with MAKEOVERRIDES
(with make 3.81 atleast), the only thing that changes is the output
of the origin function (command line -> environment).
Unfortunately some packages don't look at origin (E.G. uClibc 0.9.31+)
To really make O go away, we have to override it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Lay down the path to add more than two toolchain kinds:
- check the type of toolchain as:
ifeq (toolchain_buildroot,y)
blabla buildroot-specific
else ifeq (toolchain_external,y)
blabla external-specific
endif
- prefer using positive checks, a-la:
ifeq (foo,y)
instead of:
ifneq (bar,y)
(where foo and bar are mutually exclusive)
- have the toolchain_buildroot case always appear first
- gettext is handled differently, because we want to add an option
only if not using the buildroot toolchain, hence we use ifneq.
Signed-off-by: Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
Acked-By: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This fixes the build of libcap, with external toolchain, when it is
the first package being built.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Create tarballs with git-archive so we're sure they don't contain
anything not in git (E.G. local backup configs).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
BR2_VENDOR_GDB_VERSION and VENDOR_GDB_VERSION are no longer settable.
The only user is gdb, and it's totally useless in this case.
Signed-off-by: Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BR2_VENDOR_SUFFIX and VENDOR_SUFFIX variables are no longer settable.
The only user is gdb, and is totally useless in this case.
Signed-off-by: Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#823.
~ is commonly used as a suffix to editor backup files.
Remove these files, just as we remove CVS-directories and
.empty-files.
[Peter: tweaked to remove in same find invocation as .empty]
Signed-off-by: Anders Darander <ad@datarespons.se>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reported by Bjørn Forsman <bjorn.forsman@gmail.com>.
If CDPATH is set in the environment, cd <dir> will print the absolute path
of <dir>, causing various trouble (The most critical being BASE_DIR ending
up as <path> <path> which breaks basically everything).
Fix it by clearing CDPATH. Notice that export doesn't affect the environment
of $(shell ..) calls, so explicitly throw away any output from cd in the
BASE_DIR shell call.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The config cache might contain invalid values when .config is changed
(E.G. when adding/removing libraries), so drop it so config checks are
rerun for new packages (existing package still won't be rebuilt).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reported by mr_claus on IRC.
This ensure DL_DIR is always an absolute path, like it was before the
build dir reorganization - Fixes vim (patch) build.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As discussed on the list, fixup the *clean targets, so we now have:
clean: remove all generated files (E.G. everything in output/)
distclean: same as clean, but also remove the kconfig build and .config
Also tweak 'make help' output to match. This also merges the two
different clean / distclean targets we had depending on if there was
a .config present or not (most variables are not defined for !.config
case, so E.G. the clean target ends up being a noop).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As discussed earlier on the mailing list. It simplifies code, gives more
sensible error message on typos and makes the defconfigs easier to find
for users.
Furthermore, update documentation to match.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Similar to the normal targets, but only affects the BR2_PACKAGE_* options.
E.G. handy for keeping your current toolchain config while testing
(random) packages.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
get rid of the removed saveconfig/getconfig targets, and instead document
randconfig/defconfig/allyesconfig/allnoconfig.
Furthermore, get rid of the unused tags target.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
To reflect the new output directory hierachy rename the Makefile variable
TOOL_BUILD_DIR to TOOLCHAIN_DIR.
Signed-off-by: Michael Roth <mroth@nessie.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In the output directory, we now have
- build/ where all the packages are built
- images/ where the final kernel and rootfs images are stored
- staging/ the staging directory (containing the development files
and libraries compiled for the target)
- target/ which contains the target root filesystem
- host/ which contains all the host programs
- stamps/ which contains the stamps files
Therefore, the build_ARCH and toolchain_build_ARCH have been
removed. People willing to use the same Buildroot sources to compile
for different architectures are invited to use the O= command line
option for out-of-tree compilation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of putting all the build-related stuff as a mess in the
Buildroot sources, group them in an output/ directory.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This can be achieved by adding a new target in target/device/, and I
will later propose a mechanism to add external boards and packages, so
that our users not willing to get their target-specific or
package-specific things merged can keep them cleanly separated from
Buildroot tree.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The "project" feature was designed to allow to several projects to be
built inside the same Buildroot source tree and allowing the toolchain
and non-configurable packages to be shared between the different
projects on the same architecture. While being interesting in theory,
this feature adds a level of complexity to Buildroot, both from an
user perspective and from a developer perspective, while one of the
main Buildroot strengh is to be simple. Moreover, this feature is only
seldomly used by our users.
From a user-level perspective, this for example allows to remove the
project_build_ARCH directory, which was very confusing. The
autotools-stamps directory is also removed, since these stamps are
back at their normal location.
Description of the changes involved :
* project/, directory removed
* Makefile
- Don't include project/Makefile.in and project/project.mk anymore
- Grab a copy of the contents of project/Makefile.in at the
location it was imported, but remove the definition related to
PROJECT_BUILD_DIR. The TARGET_DIR is now in
$(BUILD_DIR)/target_dir
- Remove the creation/removal of the $(PROJECT_BUILD_DIR) and
$(PROJECT_BUILD_DIR)/autotools-stamps directories
- Don't make world depends on target-host-info. This target was
defined by project/project.mk to customize /etc/issue,
/etc/hostname and create /etc/br-version depending on the
project definitions. We can of course imagine re-adding such a
feature later.
- Replace PROJECT_BUILD_DIR by BUILD_DIR everywhere
- Remove the update, log and lognr.$(PROJECT) target, they were
specific to the project feature.
* package/Makefile.autotools.in
- Replace PROJECT_BUILD_DIR by BUILD_DIR for the location of the
configure cache
- Move the INSTALL_TARGET and HOOK_POST_INSTALL stamps to the same
directory as the other stamps (i.e, in the package directory).
* package/Makefile.in
- Replace PROJECT_BUILD_DIR by BUILD_DIR for the location of the
configure cache
* package/at/at.mk,
package/busybox/busybox.mk,
package/busybox/initramfs.mk,
package/customize/customize.mk,
package/linux-fusion/linux-fusion.mk,
package/ltp-testsuite/ltp-testsuite.mk,
package/nfs-utils/nfs-utils.mk,
target/cpio/cpioroot.mk,
target/cramfs/cramfs.mk,
target/device/Atmel/DataFlashBoot/DataflashBoot.mk,
target/device/Atmel/Makefile.in,
target/device/Atmel/at91bootstrap/at91bootstrap.mk,
target/device/KwikByte/Makefile.in,
target/ext2/ext2root.mk,
target/initramfs/initramfs.mk,
target/iso9660/iso9660.mk,
target/jffs2/jffs2root.mk,
target/linux/Makefile.in,
target/romfs/romfs.mk,
target/squashfs/squashfsroot.mk,
target/tar/tarroot.mk,
target/ubifs/ubifsroot.mk
- Replace PROJECT_BUILD_DIR by BUILD_DIR
* target/device/Config.in
- Do not include project/Config.in anymore
* target/linux/Makefile.in.advanced
- Replace PROJECT_BUILD_DIR by BUILD_DIR
- Store the stamps file in $(STAMP_DIR) instead of
$(PROJECT_BUILD_DIR)/autotools-stamps
* target/u-boot/Makefile.in
- Replace PROJECT_BUILD_DIR by BUILD_DIR
- Remove $(PROJECT) from the U-Boot target binary name
- Remove the insertion in the configuration of the project name as
the hostname
- The u-boot-autoscript target now generates
$(U_BOOT_AUTOSCRIPT).img instead of
$(U_BOOT_AUTOSCRIPT).$(PROJECT)
* toolchain/gcc/gcc-uclibc-3.x.mk
toolchain/gcc/gcc-uclibc-4.x.mk
- Move the stamps files to $(STAMP_DIR)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Define a qstrip function that strips double quotes and then
whitespaces around a given string. This is a very commonly needed
thing, and having a function allows to remove a large quantity of
hand-written definitions, followed by a dummy comment to make text
editors not crazy because of the unmatching double quote.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The find command syntax is incorrect when deleting CVS and .svn directories
from the target filesystem, which prevent CVS directories from being
deleted.
It's useful to delete these dirs because users of buildroot often import
buildroot into CVS or Subversion.
Signed-off-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It involved:
* Modifying the top-level Makefile to create the xconfig target, and
the $(CONFIG)/qconf target to compile the qconf utility
* Modifying the package/config/Makefile magic so that C++ files and
binaries gets linked properly, re-using the
package/config/Makefile.kconfig logic inherited from the kernel
* Hacking a little bit package/config/Makefile.kconfig in a way
similar to the modifications done for the mconf (menuconfig
interface)
Signed-off-by: Alper Yildirim <ayildirim@aselsan.com>
The config help text says it all:
Specify a script to be run after the build has finished and before
the BR2 starts packing the files into selected packages.
This gives users the oportunity to do board-specific cleanups,
add-ons and the like, so the generated files can be used directly
without further processing.
The script is called with the target directory name as first and
only argument. Make sure the exit code of that script is 0,
otherwise make will stop after calling it.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove toolchain build dir, and don't try to remove the non-existing include
dir. Also don't explicitly remove the kernel image located in binaries as
we're already removing that dir.
Add BR2_ENABLE_LOCALE_PURGE / BR2_ENABLE_LOCALE_WHITELIST options to
remove unwanted locales from the target rootfs. Handy for stuff like
the gtk stack, which comes with ~25 MB locales.
Works similar to localepurge in Debian, E.G. you provide a white list
of wanted locales, and everything else is removed.
Move stamp (dependency) files outside the (version specific) source
directories, so other packages can hardcode dependencies on them instead
of having to use <PACKAGE>_VERSION variables.
This is important as the variables in the make rules are evaluated when
the rules is seen, which might be before the dependent makefile is parsed
(and hence <PACKAGE>_VERSION variable is known, screwing up stuff.
The downside of this is that the package isn't automatically rebuilt
when the version changes (E.G. by a svn update) and you now also have to
remove the stamp files next to $(BUILD_DIR)/<PACKAGE>-* to force a rebuild.
I often find myself forgetting what those targets were called, and I imagine
others may not even be aware of their existence.
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
This patch will add a rule to top level Makefile to depend on the
$(PROJECT_BUILD_DIR)/autotools-stamps as a required directory. Hence it will be
generated if missing in stead of made when the $(PROJECT_BUILD_DIR)/.root rule
is triggered.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
This patch will create the autotools-stamps directory early in the build
process, thus making it possible for non Makefile.autotools.in packages to use
this directory to hold stamp files.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
HOST_GLIB is set to the path that contains the host glib tool set and is
used when building packages using glib. The buildroot top level Makefile
sets HOST_GLIB using which to find the path where glib-genmarshal is
located.
The problem is that a cross compiled version of glib-genmarshal is also
put in the build_ARCH/staging_dir/usr/bin directory when the package
libglib2 is built. This cross compiled version will typically not run on
the host system.
Fix it by ignoring staging_dir in the which output.
Closes#5934
jacmet: fixed to work correctly if it's only found in staging_dir.
Improve external toolchain support
* Do not put kernel-headers in the dependencies of BASE_TARGETS in
the case where BR2_TOOLCHAIN_SOURCE is not y. The kernel headers
are already supposed to be part of the external toolchain, so
there's no need to download, extract and install them.
* In the configuration system, don't display the kernel headers
version selection list when an external toolchain is selected. This
is implemented by moving the source
"toolchain/kernel-headers/Config.in" inside the if
BR2_TOOLCHAIN_SOURCE in toolchain/Config.in.2.
* Change the description and help message of the BR2_LARGEFILE,
BR2_INET_IPV6, BR2_INET_RPC, and BR2_SOFT_FLOAT option in
toolchain/external-toolchain/Config.in. In the case of an external
toolchain, the semantic of these options is not to enable large
file support, IPV6 or RPC (since the toolchain is already compiled,
it has been decided previously). Their semantic is to let Buildroot
know about the characteristics of the external toolchain being
used.
As an improvement, we could guess these values automatically:
- for BR2_LARGEFILE, look at the value of __UCLIBC_HAS_LFS__ in
bits/uClibc_config.h in the libc headers directory.
- for BR2_INET_RPC, look at the value of __UCLIBC_HAS_RPC__ in the
same file
- for BR2_INET_IPV6, look at the value of __UCLIBC_HAS_IPV6__ in
the same file
- for BR2_SOFT_FLOAT, look at the output of $(CC) -v 2>&1 | grep
-- "--with-float=soft"
But I'm not sure how this would be possible, since these values are
used at configuration-time by other configuration options, not only
at build time.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
make "make clean" remove the .root stamp, so that everything will
be reinstalled properly on a subsequent build. (bug id 4304)
Also remove new autotools-stamps directory.
The MAKELEVEL test is not that robust; It fails with the recent log
support or if buildroot is driven from an external Makefile.
Rework it to instead detect source-check/external-deps by the fact that
they set SPIDER.
Mark empty directories in target skeletons with .empty files
and remove them while copying to target (like it's already done for
svn and cvs files) to better support version control system which don't
handle empty directories (E.G. git-svn).
Will need to try to copy eventual pre-existing project-specific deps back
to package/config in order not to mess up the corresponding timestamps (to avoid superfluous rebuilds)..
=========================================================
The purpose of the BSP patch is to allow building
several boards inside the same buildroot tree.
For this to work, each board has to have its
own "$(TARGET_DIR)" and all *configurable* packages
must be rebuilt for each board.
They are now built in the "$(PROJECT_BUILD_DIR)"
All non configurable packages can and should still
be built in the "$(BUILD_DIR)".
If a package is built for one board, then when
you build for a second board of the same architecture
the build becomes a simple copy of the resulting
binaries.
-----
Define BR2_PROJECT which will be used as the selector
between different boards. Note that BR2_PROJECT allow
you to build multiple root file systems for a single
board, and should not be confused with BR2_BOARD_NAME
which relates to the H/W.
-----
Define PROJECT_BUILD_DIR as "PROJECT_BUILD_DIR/$(PROJECT)"
Define BINARIES_DIR as "binaries/$(PROJECT)"
Define TARGET_DIR as "$(PROJECT_BUILD_DIR)/root"
(some prefix/postfix may apply)
Resulting images are stored in "$(BINARIES_DIR)"
-----
Define a few new environment variables in Makefile
PROJECT: Stripped BR2_PROJECT
DATE: Date of build in YYYY-MM-DD format
HOSTNAME: Stripped BR2_HOSTNAME => /etc/hostname
BANNER: Stripped BR2_BANNER => /etc/issue
Linux and Busybox will be built in $(PROJECT_BUILD_DIR)
More patches will be needed later to ensure all
configurable packages are built in this directory.
This also provides a nice up-to-date filestamp if something got reconfigured (e.g. c++ support got toggled) that can be used in the future to depend accordingly.
This patch changes the way the top level Makefile searches for a
<board>_defconfig file, it will only look in the target/ directory and its sub
directories.
The patch also enables loading a defconfig even if there already is a .config.
(Hans-Christian Egtvedt)
wget's spider-mode (i.e. just see if the server says the file is there without
actually downloading the files.
Convenient to check for unavailable source-packages.
- depending on the BR2_GNU_BUILD_SUFFIX, set the respective EXEEXT, LIBEXT, SHREXT extensions for use on the target.
Thanks to Tom for suplying a diff which implements these.
Quick patch to avoid deleting my directory of RPM Sources.
I tend to use buildroot as "make DL_DIR=/.rh/SOURCES", with the rpm
topdir set to $HOME/.rh in my .rpmmacros -- allows me to build RPMs as
non-root, and share the source with buildroot. Problem is, buildroot
likes to delete my directory :(
and Dan Kegel's crosstools (7??-*).
Use makefile vars for toolchain names in ccache.mk and gdb.mk.
Fix a g++-related symlink issue with ccache.
Change the default to gcc 3.4.2 and binutils 2.15.91.0.2 (now that mips
is building). Let the users go forth and test... ;-)
1) Allow selection of binutils/gcc/gdb/kernel headers to build, although
some of the older tool patches probably need updating.
2) Rework gdb build so that remote debugging now works with gdbserver.
3) Misc. other package updates.3) Misc. other package updates.3) Misc. other package updates.
causing problems. Newer uml messes up sigcontext.h and is a pain
to build anyways. So kill it for now. It is trivial to build for
stock i386 and then boot the generated root_fs using uml.
works for dynamicly linked executables. Only tested so far on i386 with
gcc 3.3.2. But combined with the latest ldso updates, I can now get a
dynamicly linked java helloworld app to run.
Add a config toggle for building gcj and libgcj. The build runs fine
through gcc-final but currently requires hand interventions to build
gcc-target. Again, only tested so far on i386.
issues for applications, we also create staging_dir/bin/<arch>-linux-*
symlinks which allows us to configure most apps with target=<arch>-linux.
gcc 3.3.2 libstdc++ now correctly identifies uclibc locale support.
There are still some issues (mainly related to wide char time strings
and wcsftime) to be addressed, but those are on hold until the uClibc
locale internals are reworked once again.
With the new stuff, we can also build gcc 2.95 and STLport again, although
the native gcc build for the target is failing.
Archs supported (some archs not yet tested):
2.95 - i386, arm, mips*, powerpc.
3.3.2 - Hopefull all for which uClibc has shared lib support.
i386 (limited to 64 bit long double... same as double), arm (libfloat),
mips, and mipsel.
Enable cross compiling a native gcc 3.3 toolchain to run on the target.
Misc rootfs cleanups... strip some things that weren't, eliminate duplicate
libs, move openssl shared libs out of /lib, reduce size of libssl.so
by dynamicly linking with libcrypto.so, fix dropbear compile on mips.
Add support for libstd++ in full locale mode, and remove the need for
config hacks when using uClibc stub locale support.
TODO --
gdb intl support is still broken.
uClibc should auto-download the pregenerated locale data
