Adds support for USB rtl8821cu wifi cards.
Similar to rtl8821au and rtl8812au-aircrack-ng packages.
https://github.com/morrownr/8821cu-20210118
Signed-off-by: Christian Stewart <christian@paral.in>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a defconfig for the Starfive VisionFive2 board, a board built around the
Starfive JH7110 RISC-V 64bit SoC.
This board comes with functional lowlevel and U-Boot bootloaders in SPI
flash. The defconfig reuses these and only builds a (5.15 based) kernel and
rootfs.
The factory shipped U-Boot is hard coded to look at MMC partition 3.
Signed-off-by: Francois Dugast <francois.dugast.foss@gmail.com>
[Peter: add to DEVELOPERS]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Lichee RV Dock is a RISC-V Linux development kits with high integration,
small size and affordable price designed for opensource developer.
https://wiki.sipeed.com/hardware/en/lichee/RV/Dock.html
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Tested-by: Indrek Kruusa <indrek.kruusa@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Lichee RV - Nezha CM is a compute module with modular design, equipped
with Allwinner D1 chip (based on T-Head XuanTie C906 core), 512MB DDR3
RAM.
Board support is based on the nezha defconfig already available in
buildroot.
https://wiki.sipeed.com/hardware/en/lichee/RV/RV.htmlhttps://linux-sunxi.org/Sipeed_Lichee_RV
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Reviewed-by: Indrek Kruusa <indrek.kruusa@gmail.com>
Tested-by: Indrek Kruusa <indrek.kruusa@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package install the required firmware for enabling the
Bluetooth device embedded in the RTL8723DS chip.
The driver is included in Linux main tree and can be enabled
with the BT_HCIUART_RTL symbol.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Tested-by: Indrek Kruusa <indrek.kruusa@gmail.com>
[Peter: use install -D]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a separate U-Boot package that allows to build the
intermediate SPL binary for the Cortex-R5 core on TI's k3
platforms. Usually, the resulting SPL will be used for k3-image-gen to
build the full R5 boot binary tiboot3.bin.
Signed-off-by: Xuanhao Shi <x-shi@ti.com>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Acked-by: Andrew Davis <afd@ti.com>
Tested-by: Bryan Brattlof <bb@ti.com>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Bernd:
- switched to actively maintained fork
- package/Config.in: moved to "Hardware handling" (Peter)
- added toolchain dependencies (Thomas)
- added license hash
- fixed build errors related to iconv and execinfo (Peter)
- removed hook HDDTEMP_REMOVE_MAN (Thomas)
- install hddtemp.db to target
- added build/install _CMDS due to
https://github.com/vitlav/hddtemp/issues/5]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[yann.morin.1998@free.fr:
- use GETTEXTIZE=YES, drop host-gettext from _DEPENDENCIES
- drop custom build and install commands now that we gettextize
- explicitly specify the DB path, introduce HDDTEMP_DB_PATH
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
His e-mail address no longer exists:
Your message to sven.haardiek@iotec-gmbh.de couldn't be delivered.
sven.haardiek wasn't found at iotec-gmbh.de.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
His e-mail address no longer exists:
Your message wasn't delivered to derrick@meter.com because the address
couldn't be found, or is unable to receive mail.
Learn more here: https://support.google.com/mail/answer/6596
The response was:
The email account that you tried to reach does not exist. Please try
double-checking the recipient's email address for typos or unnecessary
spaces. Learn more at https://support.google.com/mail/answer/6596
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a package to install the additional edk2 platforms files, not
compatible with the normal licensing requirements and held in the
edk2-non-osi repository.
Only the Marvell Armada files are copied at this point, to support building
edk2 for the MACCHIATObin platform.
The referenced commit corresponds to version edk2-stable202208 of edk2,
based on the timestamps.
This package is heavily inspired from package/edk2-platforms.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The packaged version has a number of security issues, newer versions require
erlang 23+ and nobody has stepped up to maintain it since the issues were
reported:
http://lists.busybox.net/pipermail/buildroot/2022-November/656230.html
So drop the package and add legacy handling for it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds support for Xilinx Versal VCK190 evaluation board.
VCK190 features can be found here:
https://www.xilinx.com/products/boards-and-kits/vck190.html
The VCK190 is based on the Xilinx Versal family:
https://www.xilinx.com/products/silicon-devices/acap/versal.html
The VC1902 included with the VCK190 evaluation board has Xilinx
AI Engine acclerators designed for accelerating machine learning
applications. Also included is an upgrade from prior Zynq and
ZynqMP families to ARM Cortex-A72 cores.
While the Linux kernel for Versal is quite similar to ZynqMP,
the boot process has significantly changed.
Triple-redundant MicroBlaze cores are used to boot and setup
Versal devices. For this reason, current buildroot support
will download pre-built firmware images and use Xilinx bootgen
to generate the boot.bin for the vck190.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds support for downloading versal microblaze firmware binaries.
These are necessary for booting Xilinx versal devices.
The location of these binaries is temporary, and will soon be added to the
Xilinx firmware repository. The temporary location is using the same free
distribution license as the Xilinx firmware repository.
Once these files are available on the Xilinx repository, this package will
be updated to the new location.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package builds to fail with Linux > 5.15 and abperiasamy's
rtl8812AU_8821AU_linux repository is not maintained since 2 years and
there is now a fork where all pending patches have been upstreamed, so
let's switch to lwfinger's rtl8812au repository that is well
maintained with Linux up to version 5.18 supported. While switching
let's drop all local patches. Also add me as maintainer for this
package in DEVELOPERS file.
Fixes:
http://autobuild.buildroot.net/results/a3db3a6540b67a1f1fe31d61fe1d6824d43f59f0/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Christian Stewart<christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- i.MX Hantro V4L2 Daemon. Provides the vsidaemon, which is needed for
V4L2 nodes to work.
- To match NXP 5.15.52-2.1.0 release.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
SSCEP is a client-only implementation of the SCEP (Cisco System's Simple
Certificate Enrollment Protocol).
The goal of SCEP is to support the secure issuance of certificates to
network devices in a scalable manner, using existing technology whenever
possible. The protocol supports the following operations:
* CA and RA public key distribution
* Certificate enrollment
* Certificate and CRL query
Certificate and CRL access can be achieved by using the LDAP protocol,
or by using the query messages defined in SCEP.
CC: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
I am not really maintaining these packages, I don't follow closely
enough nor use them to take the time to make the necessary changes.
Giulio has been much more reactive than me to fix issues and he is
already listed for them anyway.
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Z3, also known as the Z3 Theorem Prover, is a cross-platform
satisfiability modulo theories (SMT) solver.
https://github.com/Z3Prover/z3
Signed-off-by: Julien Olivain <ju.o@free.fr>
[yann.morin.1998@free.fr:
- python bindings 'depends on' python, not 'select' it
- fix check-package in test_z3.py
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is a header only library which is required by the latest version
of zxing-cpp.
Include paths and pc file are based off of debian libstb package.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit
4e7dfe20bb ("configs/friendlyarm_nanopi_m4:
remove defconfig") forgot to fully reflect the removal of the
defconfig in the DEVELOPERS file, causing a get-developers warning:
WARNING: 'board/friendlyarm/nanopi-m4' doesn't match any file
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Quoting https://github.com/foo86/dcadec
"This program is deprecated!
This decoder has been fully integrated into FFmpeg master branch and
further development will continue there. Using FFmpeg for DTS decoding
is now recommended."
lbdcadec has had no commit oin the past 7+ years now.
Fixes:
http://autobuild.buildroot.net/results/1e63586c91a2670ecac2940f6e9840e6801c32f3/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[yann.morin.1998@free.fr: amend commit log with age of last activity]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In a private e-mail, Emile said "Hi Thomas. Please remove me from the
DEVELOPERS file. I am no longer interested in the packages under my
name."
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add docopt.cpp library that can be used to create intuitive command
line interfaces with very little code by describing the valid calls
using the (POSIX.1-2017) command line utility argument syntax.
Signed-off-by: Eero Aaltonen <eero.aaltonen@vaisala.com>
Reviewed-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Tested-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a defconfig to build an AArch64 U-Boot based firmware implementing the
subset of UEFI defined by EBBR[1], as well as a Linux OS disk image booting
with UEFI, to run on Qemu.
The generated firmware binary can also be used to install or run another OS
supporting the EBBR specification.
We do not have Linux 5.19 headers at the moment therefore we rely on 5.17
in the defconfig.
[1]: https://github.com/ARM-software/ebbr
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Container Networking Interface plugins.
https://github.com/containernetworking/plugins
Dependency of podman.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
catatonit is a simple but valid init binary to act as PID 1 for containers.
https://github.com/openSUSE/catatonit
Dependency of podman.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add myself to help maintaining package/libkcapi.
Signed-off-by: Tan En De <ende.tan@starfivetech.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is a new pep517 based build backend.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
tinycompress is a library for compress audio offload in alsa.
It also contains the "cplay" and "crecord" programs.
tinycompress is part of the ALSA project.
https://www.alsa-project.org/
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
mdio-tools are kernel module and accompanying tools for low-level
debugging of devices attached on MDIO bus like PHY-s, switches etc.
Userspace tools provide C22 or C45 reads and writes, benchmarking
and even dedicated Marvell Link Street tools via the included
kernel module.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
kmemd let's you inspect a live Linux kernel's memory using GDB.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds Xilinx bootgen as a host package to buildroot.
bootgen is a required utility for generating a boot.bin for
Xilinx versal products.
In addition, for developers who wish to use secure boot with
Xilinx SoC products such as zynq and zynqmp, bootgen has a
more complete offering in secure boot features than the u-boot
mkimage utility.
https://github.com/Xilinx/bootgen
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a defconfig for the Starfive VisionFive board, a board built around the
Starfive JH7100 RISC-V 64bit SoC (same as Beaglev).
This board comes with functional lowlevel and U-Boot bootloaders in SPI
flash. The defconfig reuses these and only builds a (6.0 based) kernel and
rootfs.
The factory shipped U-Boot is hard coded to look at MMC partition 3 and
misses some variables, so we provide a uEnv.txt to fix that up, based on
what is done in provided Fedora image.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Nicolas Tran is apparently no longer at Smile:
The response from the remote server was:
450 4.1.1 <nicolas.tran@smile.fr>: Recipient address rejected: User unknown in virtual mailbox table
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
His e-mail server is no longer responsive. Every single day, we get:
<joerg.krause@embedded.rocks>: connect to embedded.rocks[99.83.154.118]:25:
Connection timed out
when sending the daily autobuilder report.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A native implementation of TLS (and various other cryptographic tools)
in JavaScript.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
[Thomas: switch to pre-compiled JS files instead of depending on
host-nodejs]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
crun is a fast and low-memory OCI Container Runtime in C.
https://github.com/containers/crun
Signed-off-by: Christian Stewart <christian@paral.in>
Tested-by: TIAN Yuanhao <tianyuanhao3@163.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
No review/patches from my side the last few months, so drop my
DEVELOPERS entry.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Docker Compose v2 is no longer a standalone component, but is now a
plugin loaded by docker-cli.
As such, it should not be installed in /usr/bin, but in the directory
where docker-cli loads its plugins from.
Additionally, we consequently make docker-compose depend on docker-cli;
indeed, it does not really make sense to present a plugin unless the
component it attaches to is already enabled [0].
License hash changed due to strictly copying the license text template,
without customisation to the year and copyright owner.
[0] the original submission by Christian would use a select, to keep
existing config, but that's not sensible, as we already have some
packages that are plugins and that use depends-on, like nginx plugins.
For consistency and as it semantically makes sense, we use a depends-on
here too.
Signed-off-by: Christian Stewart <christian@paral.in>
[yann.morin.1998@free.fr:
- don't select docker-cli, but depends-on it; explain it in commit log
- explain why we override the install commands
- explain change in license file hash
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
python-libevdev is needed for libinput replay command:
$ libinput replay recording.yml
Error: No module named 'libevdev'
One or more python modules are missing. Please install those modules and re-run this tool.
Indeed only libinput-replay tool is a python script
(like libinput-analyze-recording, libinput-measure-fuzz...)
python-libevdev itself requires a kernel built with
CONFIG_INPUT_UINPUT option enabled, enable this option if a kernel is
built by Buildroot.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libmanette is a library which provides a higher level interface to
enumerate and make use of game controllers (gamepads, joysticks).
WebKitGTK can use libmanette to expose controllers to web content,
which will be enabled on a follow-up patch.
Minimal kernel headers 4.16 for input_event_sec and input_event_usec
in struct input_event.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[Arnout: add kernel headers dependency suggested by Romain]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Dracut is the tool used by desktop distributions to build initrds.
In the embedded world, it can be very useful, too, for instance when
wanting to create an initramfs for a system recovery mode.
Whereas it is definitively possible to achieve this with buildroot, the
process is to have a dedicated buildroot configuration for that, and
perform a full build. Instead of doing that, dracut can pick the needed
binaries/shared libraries, configuration files, or kernel modules from
the 'target' directory.
The advantage is to save build time, and also to have a consistency
between the packages versions taken for the recovery and the production
filesystem.
The principle of dracut is based on the so-called 'dracut modules'. The
modules determine what will be included in the initramfs. For example,
one of dracut's modules checks the kernel modules that are included and
also includes the corresponding firmware blobs.
On the host, they are on host/lib/dracut/modules.d
Each directory as a prefix number for the order of execution, and
at least a "module-setup.sh" script.
Dracut sources all of them, and typically calls the "check()" function,
which is the placeholder for required binaries (that are aimed to be
polulated in the initrd), then the "depends()" function, that lists
other modules to depend on, and the "install()" function, that makes
the actual work.
Dracut was initially thought to work with systems using systemd,
but it can also work without it. Do to so, every "systemd-xxx"
module must be disabled in the dracut configuration file. For
convenience, the 05busybox-init module is provided, to support
busybox init system. Note that this module should *not* be enabled when
using systemd init. It is therefore only installed if busybox init is
selected.
Musl and uClibc make assumptions about the existence of some symlinks
that are not discoverable with readelf. Therefore, another module
05libc-links is provided that creates those links. The module is
installed regardless of which libc is used - the script itself discovers
if the links need to be installed based on which libc is found.
Signed-off-by: Thierry Bultel <thierry.bultel@linatsea.fr>
[arnout@mind.be: many changes]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Adam Duskett <aduskett@gmail.com>
[yann.morin.1998@free.fr: some additional fixups]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Required by python-twisted[conch], which is required by
python-crossbar.
Signed-off-by: Emile Cormier <emile.cormier.jr@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
nanopi-neo no longer builds, as uboot needs python2 on the host:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2812053540
I no longer have access to that board, so I can't test an update to
either uboot or the kernel anymore.
Drop the board.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Broadcom Northstar family of SoCs is most commonly used for home
routers. It's an ARM platform with Cortex-A9 CPU(s).
All known Northstar devices come with CFE bootloader which almost
always expects a TRX firmware format (with exception for D-Link). Some
vendors (like Luxul and Netgear) wrap TRX in their own containers.
This board code provides:
1. Minimal kernel with support for on-SoC blocks. It enables Linux
drivers for SoC, watchdog, Ethernet, switch, USB, PCIe, LEDs).
2. Post image script building firmware images. In uses Buildroot
packages tools (lzma_alone, otrx, lxlfw) to build
bootloader-compatible images that can be flashed.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
construct is a Python library for declarative serialization/
deserialization of structured binary data.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Needed for upcoming version bump of transmission.
Build test using this defconfig
BR2_PACKAGE_DHT=y
was successful:
andes-nds32 [ 1/45]: OK
arm-aarch64 [ 2/45]: OK
bootlin-aarch64-glibc [ 3/45]: OK
bootlin-arcle-hs38-uclibc [ 4/45]: OK
bootlin-armv5-uclibc [ 5/45]: OK
bootlin-armv7-glibc [ 6/45]: OK
bootlin-armv7m-uclibc [ 7/45]: OK
bootlin-armv7-musl [ 8/45]: OK
bootlin-m68k-5208-uclibc [ 9/45]: OK
bootlin-m68k-68040-uclibc [10/45]: OK
bootlin-microblazeel-uclibc [11/45]: OK
bootlin-mipsel32r6-glibc [12/45]: OK
bootlin-mipsel-uclibc [13/45]: OK
bootlin-nios2-glibc [14/45]: OK
bootlin-openrisc-uclibc [15/45]: OK
bootlin-powerpc64le-power8-glibc [16/45]: OK
bootlin-powerpc-e500mc-uclibc [17/45]: OK
bootlin-riscv32-glibc [18/45]: OK
bootlin-riscv64-glibc [19/45]: OK
bootlin-riscv64-musl [20/45]: OK
bootlin-sh4-uclibc [21/45]: OK
bootlin-sparc64-glibc [22/45]: OK
bootlin-sparc-uclibc [23/45]: OK
bootlin-x86-64-glibc [24/45]: OK
bootlin-x86-64-musl [25/45]: OK
bootlin-x86-64-uclibc [26/45]: OK
bootlin-xtensa-uclibc [27/45]: OK
br-arm-basic [28/45]: OK
br-arm-full-nothread [29/45]: OK
br-arm-full-static [30/45]: OK
br-i386-pentium4-full [31/45]: OK
br-i386-pentium-mmx-musl [32/45]: OK
br-mips64-n64-full [33/45]: OK
br-mips64r6-el-hf-glibc [34/45]: OK
br-powerpc-603e-basic-cpp [35/45]: OK
br-powerpc64-power7-glibc [36/45]: OK
linaro-aarch64-be [37/45]: OK
linaro-aarch64 [38/45]: OK
linaro-arm [39/45]: OK
sourcery-arm-armv4t [40/45]: OK
sourcery-arm [41/45]: OK
sourcery-arm-thumb2 [42/45]: OK
sourcery-mips64 [43/45]: OK
sourcery-mips [44/45]: OK
sourcery-nios2 [45/45]: OK
45 builds, 0 skipped, 0 build failed, 0 legal-info failed, 0 show-info failed
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Needed for upcoming version bump of transmission:
d8d765c595
Build test using this defconfig
BR2_PACKAGE_LIBDEFLATE=y
was successful:
andes-nds32 [ 1/45]: OK
arm-aarch64 [ 2/45]: OK
bootlin-aarch64-glibc [ 3/45]: OK
bootlin-arcle-hs38-uclibc [ 4/45]: OK
bootlin-armv5-uclibc [ 5/45]: OK
bootlin-armv7-glibc [ 6/45]: OK
bootlin-armv7m-uclibc [ 7/45]: OK
bootlin-armv7-musl [ 8/45]: OK
bootlin-m68k-5208-uclibc [ 9/45]: OK
bootlin-m68k-68040-uclibc [10/45]: OK
bootlin-microblazeel-uclibc [11/45]: OK
bootlin-mipsel32r6-glibc [12/45]: OK
bootlin-mipsel-uclibc [13/45]: OK
bootlin-nios2-glibc [14/45]: OK
bootlin-openrisc-uclibc [15/45]: OK
bootlin-powerpc64le-power8-glibc [16/45]: OK
bootlin-powerpc-e500mc-uclibc [17/45]: OK
bootlin-riscv32-glibc [18/45]: OK
bootlin-riscv64-glibc [19/45]: OK
bootlin-riscv64-musl [20/45]: OK
bootlin-sh4-uclibc [21/45]: OK
bootlin-sparc64-glibc [22/45]: OK
bootlin-sparc-uclibc [23/45]: OK
bootlin-x86-64-glibc [24/45]: OK
bootlin-x86-64-musl [25/45]: OK
bootlin-x86-64-uclibc [26/45]: OK
bootlin-xtensa-uclibc [27/45]: OK
br-arm-basic [28/45]: OK
br-arm-full-nothread [29/45]: OK
br-arm-full-static [30/45]: OK
br-i386-pentium4-full [31/45]: OK
br-i386-pentium-mmx-musl [32/45]: OK
br-mips64-n64-full [33/45]: OK
br-mips64r6-el-hf-glibc [34/45]: OK
br-powerpc-603e-basic-cpp [35/45]: OK
br-powerpc64-power7-glibc [36/45]: OK
linaro-aarch64-be [37/45]: OK
linaro-aarch64 [38/45]: OK
linaro-arm [39/45]: OK
sourcery-arm-armv4t [40/45]: OK
sourcery-arm [41/45]: OK
sourcery-arm-thumb2 [42/45]: OK
sourcery-mips64 [43/45]: OK
sourcery-mips [44/45]: OK
sourcery-nios2 [45/45]: OK
45 builds, 0 skipped, 0 build failed, 0 legal-info failed, 0 show-info failed
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This test relies on the OLA Dummy plugin presenting a test device
and port. It starts the daemon, performs few configuration commands,
covers the Python bindings and also test the OLA web interface.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Arnout:
- Indent hash file with two spaces.
- Bump to 1.7.3 to fix build failure with recent GCC.
- Get from github instead of PyPI.
- Add host-meson and host-python-pythran dependencies.
- Properly propagate Config.in dependencies.
- Correct usage of BR2_INSTALL_LIBSTDCPP symbol.
- Remove F77, no longer used.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Guillaume:
- -lnpymath: npymath.ini localization problem
- -lnpyrandom resolution problem
- fix legal-info for latest version LICENSE.txt
- zlib is a scipy::io module runtime requirement
- update serie for scipy 1.8.1 (latest)
]
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
[Thomas:
- add runtime test
- drop dependency on OpenBLAS, which is not needed in a minimal
configuration
- remove PYTHON_SCIPY_NPY_PKG_CONFIG_PATH logic as it is no longer
needed
]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Generated with scanpypi and converted to host.
It is a dependency of python-scipy.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Generated with scanpypi and converted to host.
It is a dependency of python-pythran.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Generated with scanpypi and converted to host.
It is a dependency of python-beniget and python-pythran.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Libdill is a C library that makes writing structured concurrent programs
easy.
There has been no release in more than two years, so we use the latest
commit on the master branch.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[yann.morin.1998@free.fr:
- explain use of a sha1
- fix check-package warnings
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is a simple test importing pyalsa, showing alsa library version and
attempting to list cards.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
nerdctl is a CLI for containerd (package docker-containerd) which is
drop-in compatible with the Docker Daemon CLI.
This allows using the lighter weight containerd daemon directly,
instead of via the additional docker daemon. It also implements
rootless mode.
https://github.com/containerd/nerdctl
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
dbus-broker is an alternate implementation of a dbus daemon. It can be
used as a drop-in replacement for the system bus daemon, as well as the
session bus daemon.
dbus-broker is (basically, and as far as we're concerned in Buildroot)
split in two components:
- the actual message bus daemon, that relays messages across clients
- a launcher, which is responsible for setting various aspects of the
bus, like setting the policy et al. and opening the socket(s) the
message bus daemon will have to listen on...
The launcher can only be used in a systemd setup (it makes heavy use of
systemd facilities), while the message bus is generic. However, the
message bus daemon is useless without a launcher. There does not exist a
non-systemd launcher, which makes dbus-broker actually a systemd-only
package; this can be revisited when/if a non-systemd launcher appears.
Note, however, that libdbus is not provided by dbus-broker. People who
want to use dbus-broker as the bus daemon, and need libdbus, will have
to enable both.
If only original dbus is enabled, things stay as they are now. This is
for the moment still the default, though we should change that once
dbus-broker has proven to work.
If only dbus-broker is enabled, it installs the necessary socket
activation units and dbus configuration files. The daemon is not
launched at boot time; instead it is socket-activated when a client
connects to the bus the first time.
If both original dbus and dbus-broker are enabled, we have a conflict
with the configuration files, the socket activation file. Also, original
dbus activates the daemon as a service in multi-user.target.wants, so it
is not socket-activated and dbus-broker would never get the opportunity
to start.
Therefore, original dbus is updated to remove the conflicting files and
the activation of dbus-daemon. Since dbus-broker installs some of the
same file that original dbus removes, we have to add a dependency to
make sure that the ones installed by dbus-broker aren't removed.
If both are installed, it is still possible to revert back to using
original dbus as system bus:
- at build-time: by calling systemctl enable/disable from a
post-build script (preferred), or by providing drop-in units
or presets in an overlay (less preferred) or custom skeleton
(as a last resort),
- at runtime (on a RW filesystem): by calling systemctl
enable/disable
Note about the user: the path to the system bus socket is a so-called
"well-known location": it is expected to be there, by spec. Moving it
elsewhere is going to break existing programs. So, the user running the
system bus daemon must be able to create that socket.
As we may have two packages providing a system bus daemon, they have to
be both able to create the socket, and thus must both be able to write
in the directory containing the socket. And since they can be switched
at runtime, they must be running as the same user.
We can't just reference the original dbus user, so we duplicate the
entry. What is important, is that the user be named 'dbus', as that's
what we use in both cases.
If both original dbus and dbus-broker are selected, the dbus user is
included twice, but the specifications are identical so that's fine.
mkusers will create the user only once.
Finally, the licensing terms are pretty trivial for dbus-broker itself,
but it makes use of third-party code that it inherits as git submodules
(that are bundled in the release archive). Thus the licensing is a bit
convoluted... The third-party codes claim to be licensed as "Apache-2.0
and LGP-2.1+" in their AUTHORS files, but at the same time claim
"**Apache-2.0** OR **LGPL-2.1-or-later**" in their README files. The
individual source files (that are used) do not seem to have any
licensing header to clarify the situation. So we represent the situation
with "Apache-2.0 and/or LGPL-2.1+".
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[yann.morin.1998@free.fr:
- don't select systemd; depend on it instead
- only install config files and systemd units without original dbus
- install a user to run the message bus as
- fix licensing info
- entirely reword and extend the commit log
- add myself to DEVELOPERS as well
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Arnout:
- Use dbus-broker as system bus if both are selected.
- Remove conflicting files from dbus installation.
- Simplify symbolic link creation.
- Add comment to remind update of session.conf and system.conf.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We rely on config.toml to be created manually during first boot as
setup stage. Even with an empty config.toml file, the gitlab-runner
needs gitlab registration token to register to a gitlab server.
Use the 14.5.1 release since 14.5.2 and 14.6.0 triggers a build error [1]
due a patch for GO < 1.17.
(helpers/patches/issue_28732/syscall.go:11:2: undefined: syscall.Issue28732Fix)
Tested:
https://gitlab.com/kubu93/buildroot/-/pipelines/442604876
[1] https://gitlab.com/gitlab-org/gitlab-runner/-/issues/28766
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Jérémy Rosen <jeremy.rosen@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We currently have no internal and no external toolchain for csky.
The website is down (no https:// available, and the http:// index
page is 404).
This commit removes the architecture entry; remnants will be dropped in
followup changes.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Guo Ren <ren_guo@c-sky.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
dust is an alternative of the command du from the Linux kernel,
written in Rust. It aims to be more intuitive and visual in order
to give the user a better view of his system's storage capacity.
Signed-off-by: Nicolas Tran <nicolas.tran@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Needed for upcoming version bump of transmission.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
GDAL is a translator library for raster and vector geospatial data
formats. As a library, it presents a single raster abstract data model
and single vector abstract data model to the calling application for all
supported formats. It also comes with a variety of useful command line
utilities for data translation and processing.
https://gdal.org/
test-pkg shows that this package is affected by binutils bug 27597.
Signed-off-by: Dominik Michael Rauh <dmrauh@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
I am not using this package anymore.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tealdeer is a fast and full-featured tldr client. tldr pages are
simplified and community-driven man pages, see https://tldr.sh/ for more
information.
https://github.com/dbrgn/tealdeer/
Signed-off-by: Danilo Bargen <mail@dbrgn.ch>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
clpeak is a tool that profiles OpenCL devices to find
their peak capacities
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
opencl-clhpp are the OpenCL API C++ bindings
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit proposes a very minimal package for qt6base. It only
supports building QtCore, so it *really* is minimal. But that's a
starting point, which we can progressively build on top. It is based
on initial work from Peter Seiderer.
This minimal QtCore build is however sufficient to build and run
simple non-graphical Qt applications.
A number of comments:
- Even though there's only qt6base for now, many other qt6 modules
will come later on, which is why we're using the same structure as
for qt5, with a subdir for package/qt6/
- Qt6 is mutually exclusive with Qt5. Even though the library names
on the target and the location of the header files are distinct,
the host tools (qmake, moc and al.) have the same name, so at least
for now, we make them mutually exclusive.
- We've chosen to use non-bundled libraries for zlib, bb2,
double-conversion and pcre2, for both the target and the host
qt6base packages.
- Contrary to qt5 where the target package was building the host
tools, now we have a host qt6base package building the host tools,
and which is needed as a dependency for the target qt6base package.
- qt6base is using CMake. However, it strongly recommends to use
Ninja as a backend instead of make, a recommendation that we follow
in this commit. Since we don't have support for Ninja in the
cmake-package infrastructure (yet), we do this manually in
qt6base.mk itself, by passing -Gninja to CMake at configure time,
and then by using cmake --build at build time and cmake --install
at install time, using explicitly provided build and install
commands. Hopefully these can go away once we have support for
Ninja directly in cmake-package.
- We disable a number of features or external libraries using FEATURE
options. However, because there are over 400 FEATURE options in
qt6base, we didn't go all the way to explicitly disabling *all* of
them (which would be needed for both the host and target
packages). We expect that this list of explicit FEATURE options
disabling will need to grow based on the feedback of users and
issues encountered.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Both the target and host variants of this package will be needed for
qt6base.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Both the target and host variants of this package will be needed by
qt6base.
Our reading of double-conversion/utils.h in the code base seems to
show that all architectures currently supported in Buildroot (to the
exception of csky, which we intend to remove, and is anyway not
usable/testable today) are supported by double-conversion.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
VOLK is the Vector-Optimized Library of Kernels
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
FreeRADIUS is an open source server which implements
a protocol for remote user Authorization, Authentication
and Accounting.
There are many modules. All modules without dependencies are enabled.
The modules with a dependency that we have are automatically enabled if
the dependency is enabled. Modules with dependencies we don't support
are explicitly disabled.
The configure script always looks in host directories for libraries, so
it is essential to explicitly disable everything that is not actually
provided.
Signed-off-by: David GOUARIN <dgouarin@gmail.com>
Signed-off-by: Kalpesh Panchal <kalpesh.panchal@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@collins.com>
[Arnout:
- remove second patch, superseded by other patches;
- add upstream links to patches;
- add more patches to avoid looking in host directories;
- explicitly add dependency on !static inherited from talloc (redundant
with glibc, but future-safe);
- simplify Config.in comment;
- check hash with PGP signature;
- add conf opts for runtime paths;
- add conf opts to disable unsupported modules;
- add more optional dependencies;
- enable/disable all modules that use a dependency;
- search defaults file in /etc/default, not /etc/sysconfig.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: José Pekkarinen <jose.pekkarinen@unikie.com>
[Thomas: add test case, add missing dependencies]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
shellcheck is already in use to check SysV init scripts.
Currently its results can be affected by the existence of a
.shellcheckrc file in any parent directory.
For instance, in this example:
(1) /path/.shellcheckrc
(2) /path/to/.shellcheckrc
(3) /path/to/buildroot
the configs from file (1) are ignored and the configs from file (2)
override the default values from the shellcheck binary.
So the config file affects the check-package result for SysV scripts.
Avoid this reproducibility issue by adding an empty config file to the
buildroot topdir.
It can also eventually contain configs (different from default values
from sheelcheck) that we want as a standard to all shell scripts tested
by check-package.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The Zeek Network Security Monitor
Zeek is a powerful network analysis framework that is much different
from the typical IDS you may know. (Zeek is the new name for the
long-established Bro system.)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Arnout:
- select python3 instead of depends;
- patch python path in post-patch instead of post-install]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
[Arnout:
- alphabetically order DEVELOPERS;
- license is OR, not AND]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
hyperfine is a benchmark tool written in Rust. It evaluates
execution time of a command passed in arguments and make
a relative comparison if multiple arguments are used at the
same time.
It can be convinient for purposes of Rust-written systems as
it runs in a stable version of Rust.
The package has been checked with correct formatting and
without typos:
./utils/check-package package/hyperfine/*
A CI test was run on gitlab.com to verify toolchain compatibilities.
Signed-off-by: Nicolas Tran <nicolas.tran@smile.fr>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop minnowboard_max-graphical_defconfig from DEVELOPERS as it has been
removed by commit b9bc22ee8a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This is pep517 pyo3 build backend that's an alternative to
python-setuptools-rust.
Note that maturin itself uses python-setuptools-rust for
bootstrapping.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Tested-by: Graeme Smecher <gsmecher@threespeedlogic.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds four test cases for Grub:
- Grub i386 legacy BIOS
- Grub i386 UEFI
- Grub x86-64 UEFI
- Grub AArch64 UEFI
There is some overlap with the ISO9660 filesystem test cases, some of
which use Grub, but we found it relevant to have separate test cases
for Grub, which were useful to test Grub in non-ISO9660 situations.
The Grub ARM UEFI case is not tested, as it requires Grub to be
chain-loaded by U-Boot. Implementing this test case is left as an
exercise for the reader.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- use EDK2 to build the OVMF blurbs from source, instead of the
binary blobs
- add host-dosfstools
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a buildroot configuration file to build a minimal Linux environment
for the Canaan KD233 board.
The configuration file is canaan_kd233_defconfig. It builds a bootable
kernel image with an embedded initramfs root file system. The image
built can be flashed to the board as is and does not require a boot
loader. This configuration uses the tiny busybox configuration defined
in board/canaan/k210-soc/busybox-tiny.config.
U-Boot currently does not support this board, making it impossible to
boot the kernel after loading it from the SD card. However, the SD card
is usable from Linux once booted using the canaan_kd233_defconfig
configuration.
The configuration also enable the kflash and pyserial-miniterm host
tools for flashing image files to the board and opening a terminal
console.
The readme.txt file documents how to build and boot the Canaan KD233
board with this configuration.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add two buildroot configuration files to build a minimal Linux
environment for the Sipeed MAIX Go board. The configurations are:
* sipeed_maix_go_defconfig: Build a bootable kernel image with an
embedded initramfs root file system. The image built can be flashed to
the board as is and does not require a boot loader. This configuration
uses the tiny busybox configuration defined in
board/canaan/k210-soc/busybox-tiny.config.
* sipeed_maix_go_sdcard_defconfig: Build a kernel image with a root
file system on the SD card and using U-Boot as the boot loader. This
uses the default busybox minimal configuration.
Both configurations also enable the kflash and pyserial-miniterm host
tools for flashing image files to the board and opening a terminal
console.
The readme.txt file documents how to build and boot the Sipeed MAIX-Go
board with these configurations.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add two buildroot configuration files to build a minimal Linux
environment for the Sipeed MAIX-Dock board. The configurations are:
* sipeed_maix_dock_defconfig: Build a bootable kernel image with an
embedded initramfs root file system. The image built can be flashed to
the board as is and does not require a boot loader. This configuration
uses the tiny busybox configuration defined in
board/canaan/k210-soc/busybox-tiny.config.
* sipeed_maix_dock_sdcard_defconfig: Build a kernel image with a root
file system on the SD card and using U-Boot as the boot loader. This
uses the default busybox minimal configuration.
Both configurations also enable the kflash and pyserial-miniterm host
tools for flashing image files to the board and opening a terminal
console.
The readme.txt file documents how to build and boot the Sipeed
MAIX-Dock board with these configurations.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add two buildroot configuration files to build a minimal Linux
environment for the Sipeed MAIXDUINO board. The configurations are:
* sipeed_maixduino_defconfig: Build a bootable kernel image with an
embedded initramfs root file system. The image built can be flashed to
the board as is and does not require a boot loader. This configuration
uses the tiny busybox configuration defined in
board/canaan/k210-soc/busybox-tiny.config.
* sipeed_maixduino_sdcard_defconfig: Build a kernel image with a root
file system on the SD card and using U-Boot as the boot loader. This
uses the default busybox minimal configuration.
Both configurations also enable the kflash and pyserial-miniterm host
tools for flashing image files to the board and opening a terminal
console.
The readme.txt file documents how to build and boot the Sipeed MAIXDUINO
board with these configurations.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add two buildroot configuration files to build a minimal Linux
environment for the Sipeed MAIX Bit board. The configurations are:
* sipeed_maix_bit_defconfig: Build a bootable kernel image with an
embedded initramfs root file system. The image built can be flashed to
the board as is and does not require a boot loader. This configuration
uses the tiny busybox configuration defined in
board/canaan/k210-soc/busybox-tiny.config.
* sipeed_maix_bit_sdcard_defconfig: Build a kernel image with a root
file system on the SD card and using U-Boot as the boot loader. This
uses the default busybox minimal configuration.
Both configurations also enable the python-kflash and pyserial-miniterm
host tools for flashing image files to the board and opening a terminal
console.
The readme.txt file documents how to build and boot the Sipeed MAIX-Bit
board with these configurations.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The Linux environment for all boards using the Canaan Kendryte K210 SoC
can be built with the same process, using configurations that differ
only by the device tree used for the build. This patch add the
shared configurations, rootfs overlay and scripts used for all
K210-based boards.
Since the K210 SoC only has 8 MB of SRAM, a special busybox
configuration and rootfs overlay are added to save memory at runtime:
* For configurations using direct kernel boot (no boot loader), the
default busybox configuration busybox-minimal.config is modified
using the fragment file board/canaan/k210-soc/busybox-tiny.config.
This reduces the size of the busybox executable to save memory when
executing shell commands.
* Busybox init system is not used and a special init scripts is provided
using the rootfs_overlay root file system overlay. This init script
simply mounts devtmpfs, /proc and /sys, and exec an interactive shell
after printing a logo. This avoids (1) boot failures due to large
memory allocations by the regular busybox init system (these
allocations fail on the K210 for lack of enough memory) and avoids
(2) keeping the init process sleeping in the background (wasted
memory).
The board/canaan/k210-soc/busybox-tiny.config and the rootfs overlay
files in board/canaan/k210-soc/rootfs_overlay are used for all Canaan
K210 SoC based boards.
For board configurations booting using the U-Boot boot loader, a common
set of linux kernel configuration parameters is provided by the file
board/canaan/k210-soc/linux-sdcard.config. In addition, the post build
script board/canaan/k210-soc/post-build.sh file and U-Boot image
generation configuration file board/canaan/k210-soc/genimage.cfg are
provided. The post-build script creates a generic "k210.dtb" symlink to
the compiled device tree file for the target board. This symlink is used
by the genimage.cfg configuration, making this file common for all
boards.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- set 'CC="$(HOSTCC)"' to avoid cross-compile failure (see [1]):
/bin/sh: line 1: .../build/ntpsec-1_2_0/build/host/ntpd/keyword-gen: cannot execute binary file: Exec format error
Waf: Leaving directory `.../build/ntpsec-1_2_0/build/host'
Build failed
-> task in 'ntp_keyword.h' failed with exit status 126 (run with -v to display more information)
- set '-std=gnu99"' to avoid compile failure with old compilers
- explicitly set PYTHON_CONFIG
- add patch 001-ntptime-fix-jfmt5-ofmt5-jfmt6-ofmt6-related-compile-.patch to
fix ntptime jfmt5/ofmt5 jfmt6/ofmt6 related compile failure
- add patch 0002-wscript-remove-checks-for-bsd-string.h-fixes-host-co.patch to
fix host-compile failure in case target libbsd is detected
- add SYSV init file (S49ntp)
- add example ntpd.conf (with legacy option enabled and provide skeleton
for NTS configuration)
- add config option for NTS support
- add ntp user/group and run ntpd as restricted user
- add libcap dependency (compile time optional but needed for droproot
support)
[1] https://gitlab.com/NTPsec/ntpsec/-/issues/694
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[Thomas: S49ntp -> S49ntpd]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a new rudimentary test inspired by the examples from jmespath's
README file ([1]).
[1]: https://github.com/jmespath/jmespath.py/blob/develop/README.rst
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
[Thomas: add entry in DEVELOPERS file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
crucible is a useful tool that allows reading and writing
to the i.MX fuses via the Linux NVMEM framework.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
[yann.morin.1998@free.fr: fix check-package]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
zerofree is a utility which scans the free blocks in an ext2 filesystem
and fills any non-zero blocks with zeroes.
https://frippery.org/uml/
The ext2fs/ext2fs.h header guards the inclusion of <sys/types.h> behind
HAVE_SYS_TYPES_H, which is an autotools-defined macro that is only
supposed to be defined by the package itself, i.e. e2fsprogs, and that
should not leak into installed headers. However, e2fsprogs does leak it,
so we work it around, liek gentoo does.
Tested-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- fix MMU dependency for comment; reword comment
- fix multi-line assignment of ZEROFREE_CFLAGS
- do not add comment trailing after assignment
- extend commit log to explain why we need the workaround
- use TARGET_CONFIGURE_OPTS, drop explicit CC=
- install to explicit destination file
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a simple test to verify that msr-tools are working.
The test needs to build a custom x86_64 kernel with support for CPUID and
MSR.
As the TSC_AUX MSR is emulated on qemu we can use it to test that a value
written with wrmsr can indeed be read back with rdmsr.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a simple compress-uncompress test to verify that pixz is working.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Gaël Portay is apparently no longer at Collabora:
<gael.portay@collabora.com>: host mail.collabora.co.uk[46.235.227.172] said:
550 5.1.1 <gael.portay@collabora.com>: Recipient address rejected: User
unknown in local recipient table (in reply to RCPT TO command)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The kernel is from upstream and U-Boot is from the OpenBMC branch
because mainline doesn't have the required support for HW, yet.
The main resulting file from the build is a flash image. The partition
layout matches the OpenBMC one for 64M chips. It makes it easier to
update the different partitions from Linux. Intermediate files can be
used to boot from U-boot over the network or to boot QEMU using
-kernel/-initrd/-dtb.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop package as it doesn't build with latest kernel and project is not
maintained anymore: code has been removed in 2017 as driver is available
in the linux-next tree (cf.
3bb1d33ad9):
In file included from /home/autobuild/autobuild/instance-3/output-1/build/rtl8723bs-11ab92d8ccd71c80f0102828366b14ef6b676fb2/./include/drv_types.h:25,
from /home/autobuild/autobuild/instance-3/output-1/build/rtl8723bs-11ab92d8ccd71c80f0102828366b14ef6b676fb2/./core/rtw_cmd.c:17:
/home/autobuild/autobuild/instance-3/output-1/build/rtl8723bs-11ab92d8ccd71c80f0102828366b14ef6b676fb2/./include/autoconf.h:27:2: error: #error CONFIG_WIRELESS_EXT needs to be enabled for this driver to work
27 | #error CONFIG_WIRELESS_EXT needs to be enabled for this driver to work
| ^~~~~
In file included from /home/autobuild/autobuild/instance-3/output-1/build/rtl8723bs-11ab92d8ccd71c80f0102828366b14ef6b676fb2/./include/osdep_service.h:23,
from /home/autobuild/autobuild/instance-3/output-1/build/rtl8723bs-11ab92d8ccd71c80f0102828366b14ef6b676fb2/./include/drv_types.h:27,
from /home/autobuild/autobuild/instance-3/output-1/build/rtl8723bs-11ab92d8ccd71c80f0102828366b14ef6b676fb2/./core/rtw_cmd.c:17:
/home/autobuild/autobuild/instance-3/output-1/build/rtl8723bs-11ab92d8ccd71c80f0102828366b14ef6b676fb2/./include/osdep_service_linux.h: In function ‘_init_timer’:
/home/autobuild/autobuild/instance-3/output-1/build/rtl8723bs-11ab92d8ccd71c80f0102828366b14ef6b676fb2/./include/osdep_service_linux.h:97:8: error: ‘_timer’ {aka ‘struct timer_list’} has no member named ‘data’
97 | ptimer->data = (unsigned long)cntx;
| ^~
/home/autobuild/autobuild/instance-3/output-1/build/rtl8723bs-11ab92d8ccd71c80f0102828366b14ef6b676fb2/./include/osdep_service_linux.h:98:2: error: implicit declaration of function ‘init_timer’; did you mean ‘_init_timer’? [-Werror=implicit-function-declaration]
98 | init_timer(ptimer);
| ^~~~~~~~~~
| _init_timer
Fixes:
- http://autobuild.buildroot.org/results/7a473e83d4a3d1e2228f4ee1282e85697de4ae5d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch adds a test case that
1) Builds the complete LLVM and CLANG set of host tools
2) Cross-compiles the compiler-rt runtime using CLANG
3) Builds a cross-compiled application using CLANG and the libfuzzer
compiler-rt library.
4) Executes the fuzz application (part of the libfuzzer package) on
target and checks expected output for a heap-buffer-overflow.
Note: The libfuzzer package is just a tutorial example of how to use
the toolkit provided by llvm (Thus not adding it as a full
Buildroot package).
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Romain Naour <romain.naour@smile.fr>
[Arnout: add Matt to DEVELOPERS]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch adds support for the compiler-rt (CLANG runtime) library.
It builds a set of static libraries and installs them into the
CLANG/LLVM toolchain resource folder. These libraries can then be
used by developers in the SDK for building target applications for
analysis.
What is fuzzing and why libfuzzer?
https://www.moritz.systems/blog/an-introduction-to-llvm-libfuzzer/
The compiler-rt fuzzer and address sanitizer tools require additional
LLVM binary tools installed to allow stack trace decoding actively during
executable analysis. This patch conditionally enables these tools.
https://github.com/google/sanitizers/wiki/AddressSanitizerCallStack
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Cc: Romain Naour <romain.naour@smile.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Valentin Korenblit <valentinkorenblit@gmail.com>
Cc: Michael Drake <michael.drake@codethink.co.uk>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
UUU (Universal Update Utility) is a Freescale/NXP I.MX Chip image deploy
tools. It is an evolution of MFGTools (aka MFGTools v3). For this and
for backward compatibility we have created a new package instead of
updating the mfgtools package.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
[Arnout: fix check-package warnings]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
arm-gnu-a-toolchain is now deprecated to be replaced by arm-gnu-toolchain.
The old link [1] now points to a shared page between Cortex-A and
Cortex-R/M [2].
Rename the package, taking into account legacy info, while bumping it.
Also update TF-A package that depends on it.
[1] https://developer.arm.com/downloads/-/gnu-a
[2] https://developer.arm.com/Tools%20and%20Software/GNU%20Toolchain
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The support for this architecture has been removed from the upstream
Linux kernel, as of commit:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=aec499c75cf8e0b599be4d559e6922b613085f8f
Which states:
The nds32 architecture, also known as AndeStar V3, is a custom
32-bit RISC target designed by Andes Technologies. Support was added
to the kernel in 2016 as the replacement RISC-V based V5 processors
were already announced, and maintained by (current or former) Andes
employees.
As explained by Alan Kao, new customers are now all using RISC-V,
and all known nds32 users are already on longterm stable kernels
provided by Andes, with no development work going into mainline
support any more.
There has also been little to no maintenance done in Buildroot for
this architecture in recent times, so let's follow the Linux kernel
community decision and drop support for this CPU architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As we're about to remove the nds32 architecture support from
Buildroot, drop the toolchain-external-andes-nds32 external toolchain
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As we're about to remove the nds32 architecture support, remove the
only defconfig that used this CPU architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Manuel Vögele has privately requested to be removed from the
DEVELOPERS file as he is no longer involved with Buildroot
usage/development.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
My Bootlin address is preferred from now on.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
wolfTPM is an open-source TPM 2.0 stack with backward API compatibility,
designed for embedded use. It is highly portable, and has native support
for Linux. wolfTPM has a compact code size with low resource usage.
Signed-off-by: Dimitar Tomov <dimi@tpm.dev>
[Thomas:
- Fix ordering in the DEVELOPERS file, use full name
- Add missing !BR2_STATIC_LIBS dependency
- Use "select" and not "select on"
- Make sure wolftpm-config script gets post-processed by using
<pkg>_CONFIG_SCRIPTS
- Add missing --with-wolfcrypt option.
- Rename WOLFTPM_CONFIG_RPATH to WOLFTPM_TOUCH_CONFIG_RPATH and use
mkdir -p to make the hook re-executable]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package adds a driver for Realtek RTL8723DS wifi chip.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add the kflash Kendryte K210 UART ISP Utility as a host package to allow
users to program their board boot ROM or SRAM with built images.
The kflash utility is available through the pypi.org python package
index. The project is homepage is: https://github.com/vowstar/kflash.py.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add RISC-V 64-bit nommu defconfig for QEMU virt machine with MMU
disabled.
Unlike qemu_riscv64_virt, qemu_riscv64_nommu_virt does not use OpenSBI,
since the kernel is running in machine mode (M-mode).
After the build is complete, you can start QEMU using the launcher
script:
$ output/images/start-qemu.sh
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ktap doesn't build with recent kernels (e.g. 5.10.104-cip3 or 5.15.37)
and is not maintained anymore (latest release in 2013 and latest commit
more than 5 years ago):
In file included from /home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/amalg.c:21:
/home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/ktap.c:30:6: warning: "CONFIG_EVENT_TRACING" is not defined, evaluates to 0 [-Wundef]
30 | #if !CONFIG_EVENT_TRACING
| ^~~~~~~~~~~~~~~~~~~~
/home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/ktap.c:31:2: error: #error "Please enable CONFIG_EVENT_TRACING before compile ktap"
31 | #error "Please enable CONFIG_EVENT_TRACING before compile ktap"
| ^~~~~
In file included from /home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/amalg.c:21:
/home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/ktap.c: In function ‘gettimeofday_ns’:
/home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/ktap.c:56:18: error: storage size of ‘now’ isn’t known
56 | struct timespec now;
| ^~~
/home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/ktap.c:58:2: error: implicit declaration of function ‘getnstimeofday’; did you mean ‘gettimeofday_ns’? [-Werror=implicit-function-declaration]
58 | getnstimeofday(&now);
| ^~~~~~~~~~~~~~
| gettimeofday_ns
/home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/ktap.c:56:18: warning: unused variable ‘now’ [-Wunused-variable]
56 | struct timespec now;
| ^~~
In file included from /home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/amalg.c:22:
/home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/kp_obj.c: In function ‘kp_obj_kstack2str’:
/home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/kp_obj.c:243:21: error: storage size of ‘trace’ isn’t known
243 | struct stack_trace trace;
| ^~~~~
/home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/kp_obj.c:253:2: error: implicit declaration of function ‘save_stack_trace’ [-Werror=implicit-function-declaration]
253 | save_stack_trace(&trace);
| ^~~~~~~~~~~~~~~~
/home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/kp_obj.c:243:21: warning: unused variable ‘trace’ [-Wunused-variable]
243 | struct stack_trace trace;
| ^~~~~
In file included from /home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/amalg.c:27:
/home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/kp_transport.c: In function ‘trace_empty’:
/home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/kp_transport.c:105:39: error: passing argument 1 of ‘ring_buffer_empty_cpu’ from incompatible pointer type [-Werror=incompatible-pointer-types]
105 | if (!ring_buffer_empty_cpu(ktap_iter->buffer, cpu))
| ~~~~~~~~~^~~~~~~~
| |
| struct ring_buffer *
In file included from ./include/linux/trace_events.h:6,
from /home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/trace_events.h:5,
from /home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/kp_events.h:4,
from /home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/kp_str.c:35,
from /home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/amalg.c:24:
./include/linux/ring_buffer.h:162:49: note: expected ‘struct trace_buffer *’ but argument is of type ‘struct ring_buffer *’
162 | bool ring_buffer_empty_cpu(struct trace_buffer *buffer, int cpu);
| ~~~~~~~~~~~~~~~~~~~~~^~~~~~
In file included from /home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/amalg.c:27:
/home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/kp_transport.c: In function ‘trace_consume’:
/home/autobuild/autobuild/instance-6/output-1/build/ktap-23bc7a4a94bd9e4e1b8b7c06632e61c041d57b5f/./runtime/kp_transport.c:116:31: error: passing argument 1 of ‘ring_buffer_consume’ from incompatible pointer type [-Werror=incompatible-pointer-types]
116 | ring_buffer_consume(ktap_iter->buffer, iter->cpu, &iter->ts,
| ~~~~~~~~~^~~~~~~~
| |
| struct ring_buffer *
Fixes:
- http://autobuild.buildroot.org/results/9067192962b4011e0da27ac2b2dc53eb1e31582c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Gerome Burlats left Smile in May 2022 and his e-mail has been disabled.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add board/zynq, board/zynqmp/kria and the missing defconfigs.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Cpulimit is a tool which limits the CPU usage of a process (expressed in
percentage, not in CPU time). It is useful to control batch jobs, when
you don't want them to eat too many CPU cycles.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
[Peter: depend on BR2_USE_MMU, add pull request links to patches]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
GNU Octave is a high-level language, primarily intended for numerical
computations. It provides a convenient command line interface for
solving linear and nonlinear problems numerically, and for performing
other numerical experiments using a language that is mostly compatible
with Matlab. It may also be used as a batch-oriented language. Octave
has extensive tools for solving common numerical linear algebra
problems, finding the roots of nonlinear equations, integrating
ordinary functions, manipulating polynomials, and integrating ordinary
differential and differential-algebraic equations. It is easily
extensible and customizable via user-defined functions written in
Octave's own language, or using dynamically loaded modules written in
C++, C, Fortran, or other languages.
https://www.octave.org/
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This is a dependency of newer sysdig. It contains the driver, and also a
few userspace components. The latter however are not meant to be
installed in the sysroot; instead, the whole thing is meant to be
included directly in the build of the project using it. Changing things
so it does work in the normal way of installing to the sysroot turns out
to be pretty complicated.
Basically, falcosecurity-libs is just a component of sysdig. It's
defined as a separate package only because that's an easier way to
download it than defining extra download and extract commands in sysdig
itself. For this reason, it's defined as a blind option in Config.in.
Signed-off-by: Francis Laniel <flaniel@linux.microsoft.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
WILC1000/3000 driver pulled from at91-linux tree set-up to be built
as an external module. Upstream Linux kernel does not support
WILC3000 features at this time. This package is intended to bridge
that gap until WILC1000/3000 is fully supported in kernel.
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Separates out WILC1000 and WILC3000 in to individual config options
since in reality only one or the other set would be needed.
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Her e-mail address at Collabora is bouncing:
host bhuna.collabora.co.uk[/private/dovecot-lmtp] said: 550 5.1.1
<mylene.josserand@collabora.com> User doesn't exist: mylene.josserand@collabora.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
0.23.1 has compilation errors with recent kernels.
0.27.1 changed license for userspace from GPLv2 to Apache and added MIT
option for driver.
New dependencies: c-ares, grpc, protobuf, tbb. There's also a dependency
on gtest, but only if tests are enabled. Therefore, add conf opt to
disable tests.
Signed-off-by: Francis Laniel <flaniel@linux.microsoft.com>
[Arnout:
- Add Francis to DEVELOPERS for sysdig.
- Add link to source of patch 2.
- Remove N/M from patch 2 (check-package).
- Correct license info and hashes.
- Remove gtest dependency.
- Add -DCREATE_TEST_TARGETS=OFF conf opt.
- Propagate Config.in dependencies of reverse dependencies.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Intel Threading Building Blocks (TBB), is a C++ library to help developers
write highly parallelized applications. OpenCV uses it to accelerate some of
it's more heavy weight procedures.
Signed-off-by: bradford barr <bradford@density.io>
Signed-off-by: Francis Laniel <flaniel@linux.microsoft.com>
[Arnout:
- add LICENSE hash;
- replace patch with explicit passing of CPLUS, CONLY, CXXFLAGS;
- rework handling of arch and add comment about it.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
I'm involved in the upstream kvm-unit-tests and the mcf5208 QEMU
machine, so I could help to have a look on these files, too.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch updates my email address in the DEVELOPERS file.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Nylon is no longer at Andes.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Alan Kao <alankao@andestech.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Even with the two upstream patches added in commit
b2e6e376a2, python-pycli still raises the
following build failure since bump of python3 to version 3.10.1 in
commit 25b1fc2898 due to the new "Multiple
Exception types without parentheses" exception
(https://docs.python.org/3/whatsnew/3.10.html):
error: File "/usr/lib/python3.10/site-packages/cli/test.py", line 142
except raises, e:
^^^^^^^^^
SyntaxError: multiple exception types must be parenthesized
So drop the package as the last release was made 10 years ago.
Fixes:
- http://autobuild.buildroot.org/results/6112e1830ce608abcea4a26b659c10e5ff09a66a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Deprecated Xlib integration for GdkPixbuf.
gdk-pixbuf-xlib has been deprecated and split off of gdk-pixbuf since
version 2.42.0 and
3362e94c25
resulting in the following "hidden" warnings with xscreensaver since
commit a7b51ed301:
Warning: GTK version 2.24.33 was found, but at least one supporting
library (gdk-pixbuf-xlib-2.0) was not, so GTK can't be used.
Perhaps some of the development packages are not installed?
Warning: The GTK libraries do not seem to be available; the
`xscreensaver-demo' program requires them.
Warning: The GDK-Pixbuf library was not found.
The PNG library is being used instead.
Some of the demos will not use images as much as they could.
You should consider installing GDK-Pixbuf and re-running
configure.
https://gitlab.gnome.org/Archive/gdk-pixbuf-xlib
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Martin Hicks asked to not maintain cryptsetup anymore:
https://lists.buildroot.org/pipermail/buildroot/2022-February/635413.html
Also he doesn't mantain any other package, so let's remove him from this
file.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr:
- only depend on libx11-xlib or libexpoxy if actually enabled
- simplify qt5 dependency
- fix check-package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch:
- adds support for Xilinx ZCU102 evaluation board
- ZCU102 features can be found here:
https://www.xilinx.com/products/boards-and-kits/zcu102.html
Signed-off-by: Neal Frager <neal.frager@xilinx.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Giulio: only build tested]
[Peter: use git describe for git hashes for clarity, add DEVELOPERS entry]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BL i.MX8M Mini is a baseboard that includes the SoM SL i.MX8M Mini.
https://www.kontron.com/produkte/baseboard-bl-i.mx8m-mini/p158549
Cc: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Arnout: explicitly set BR2_cortex_a53=y]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Move the target bpftool build out of linux-tools so that it is
up to date.
This also fixes build issues due to differences between kernel
versions. The latest version should be fully backwards compatible.
The host bpftool is needed for enabling features such as the systemd
bpf-framework (to be added in a future patch).
Use the git download method to get the libbpf submodule.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit add a simple test checking the reported distro name and
id are Buildroot (as reported by /etc/os-release).
Signed-off-by: Julien Olivain <ju.o@free.fr>
[Arnout: drop python2 variant]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop package which is not used by anyone and can't be built since drop
of host-python in commit 2743ce00ca
Fixes:
- No autobuilder failures (yet)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr: drop from DEVELOPERS]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
ACE is an open-source framework that provides many components and
patterns for developing high-performance, distributed real-time
and embedded systems. It provides powerful, yet efficient abstractions
for sockets, demultiplexing loops, threads, synchronization primitives.
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Kalpesh Panchal <kalpesh.panchal@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
ZynAddSubFX is a fully featured open source software synthesizer
capable of making a countless number of instruments, from some
common heard from expensive hardware to interesting sounds that
you'll boost to an amazing universe of sounds.
https://zynaddsubfx.sourceforge.io/
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit add a simple test doing symmetric encryption/decryption
to check this python interface with the gpg binary is working fine.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Move rpi-bt-firmware and rpi-wifi-firmware packages to the new
brcmfmac_sdio-firmware-rpi one (as they are the same upstream
package).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr:
- fix check-package
- legacy symbols still depend on arm || aarch64
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
pahole is a tool used to show data structure embedded in debugging
information formats like DWARF.
It is notably needed by the Linux kernel to generate BPF Type
Format (BTF) information used by Compile Once - Run Everywhere (CO-RE)
BPF tools.
To be built, pahole needs __LIB to be set to lib at stated in its
README.
Signed-off-by: Francis Laniel <flaniel@linux.microsoft.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A wrapper for the Gnu Privacy Guard (GPG or GnuPG).
The gnupg module allows Python programs to make use of the functionality
provided by the GNU Privacy Guard (abbreviated GPG or GnuPG). Using this
module, Python programs can encrypt and decrypt data, digitally sign
documents and verify digital signatures, manage (generate, list and
delete) encryption keys, using Public Key Infrastructure (PKI)
encryption technology based on OpenPGP.
https://docs.red-dove.com/python-gnupg/
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Networkd-dispatcher is a dispatcher daemon for systemd-networkd
connection status changes. This daemon is similar to
NetworkManager-dispatcher, but is much more limited in the types of
events it supports due to the limited nature of systemd-networkd.
To simplify the large number of transitive dependencies, remove the ones
that are implied by glibc.
To simplify the comment, simply don't show it if python is selected.
Python 2 is going to be removed soon anyway.
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
[Arnout: add Config.in comment and rework/simplify dependencies]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This new test ensures that libraries and binaries generated
using Parrot Alchemy build system are correct.
Indeed, the test uses libshdata-stress.
This binary depends on libshdata.
libshdata depends on libfutils and libfutils depends on ulog.
All of these binaries and libraries are built using Alchemy.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The libshdata library provides lock free shared-memory tools.
https://github.com/Parrot-Developers/libshdata
libshdata-stress utility does not compile using static libs
only (BR2_STATIC_LIBS=y). The issue was raised upstream:
https://github.com/Parrot-Developers/libshdata/issues/2
For now, libshdata-stress simply depends on !BR2_STATIC_LIBS.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
[yann.morin.1998@free.fr:
- do not macro-ify headers install
- do not parameterise static libs install dest
- do not parameterise binaries install dest
- reorder macros decaration and use
- remove spurious comma between module dependencies
- implicit module name
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The libfutils library is a library that contains some common
useful functions (list, hash, time).
https://github.com/Parrot-Developers/libfutils
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
[yann.morin.1998@free.fr:
- do not macro-ify headers install
- do not parameterise static libs install dest
- reorder macros decaration and use
- implicit module name
- BUILD_CMDS fit on a single line
- LIBFUTILS_TARGET_ENV is all env, not just extra env
- add missing mkdir in shared-libs case
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The ulog library is a minimalistic logging library derived from
Android logger.
https://github.com/Parrot-Developers/ulog
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
[yann.morin.1998@free.fr:
- do not macro-ify headers install
- do not parameterise static libs install dest
- reordr macros decaration and use
- implicit module name
- BUILD_CMDS fit on a single line
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Alchemy is a build system developed by Parrot.
It is a new build system based on the one used in Android.
A central makefile instance scans a workspace to find user
makefiles, includes them and register modules to be built.
https://github.com/Parrot-Developers/alchemy
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
[yann.morin.1998@free.fr: implicit package name with $($(PKG)_NAME)]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Spike, the RISC-V ISA Simulator, implements a functional model of one
or more RISC-V harts.
The host package provides an alternative solution to qemu.
https://github.com/riscv-software-src/riscv-isa-sim
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Bamboo board is an evaluation board for PowerPC 440EP CPUs.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
PowerNV is the platform using the OPAL [1] firmware on OpenPOWER
systems. OPAL first loads a kernel and an initramfs image based on
buildroot including a second boot loader petitboot [2]. The latter
does device discovery and kexecs a new Linux image from disk or
network.
QEMU implements PowerNV machines [3] for the POWER8, POWER9 and
Power10 processors which are used for dev and tests. POWER8 images
being compatible with POWER9 and Power10, simply add a single
qemu_ppc64le_powernv8 board for all.
The QEMU script boots directly from a nvme disk because it is simple
enough but a real system would boot from a ramfs first.
[1] https://github.com/open-power/skiboot/blob/master/doc/overview.rst
[2] https://github.com/open-power/petitboot/
[3] https://qemu.readthedocs.io/en/latest/system/ppc/powernv.html
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
python-distro provides information about the OS distribution it runs on,
such as a reliable machine-readable ID, or version information.
It is the recommended replacement for Python's original
platform.linux_distribution function (removed in Python 3.8). It also
provides much more functionality which isn't necessarily Python bound,
like a command-line interface.
https://github.com/nir0s/distro
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Due to a namespace clash with python-build we need to use a different
package name.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
libglvnd is the GL Vendor-Neutral Dispatch library, used to dispatch
GL calls across multiple GL implementations at runtime.
Full GL support, as usual, requires (parts of) the X11 stack: libX11,
libXext, and xorgproto (for glproto). However, with just libX11, it is
possible to do EGL on X11. EGL and GLES have no dependencies.
Note: x11 and glx are 'features', so need to be 'enabled' or 'disabled'
(or 'auto', but we don't care in Buildroot), while egl and gles1/2 are
'booleans', so need to be 'true' or 'false'.
When an actual provider for GL, EGL, or GLES is enabled, so must the
corresponding flavour be enabled in libglvnd. Conversely, when there is
no actual provider, the corresponding support must be disabled in
libglvnd. So we make each flavour selectable with hidden options, which
actual providers will have to select.
The license for libglvnd itself is a custom license by NVidia. It is
pretty close to MIT, but it's different (although Debian does classify
it as MIT); SPDX has no identifier for that license either. As such, we
choose to just identify it as 'libglvnd license', and let users deal
that with their legal department. Additionally, libglvnd bundles some
code from other projects, so we list them explicitly as well.
Signed-off-by: Jakub Skrzypnik <jskrzypnik@novomatic-tech.com>
[yann.morin.1998@free.fr:
- provide help text
- don't force X11 libraries, split them between X11 and full GL
- make each flavour selectable
- fix make check-package issues
- fix and complete licensing information
- bump to 1.3.2
- expand commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Zoltan Gyarmati <zgyarmati@zgyarmati.de>
[Thomas:
- bump to 2.3.0
- don't build demos, they need QtWidgets]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This library provides message digest functions found on BSD systems
either on their libc (NetBSD, OpenBSD) or libmd (FreeBSD, DragonflyBSD,
macOS, Solaris) libraries and lacking on others like GNU systems.
https://www.hadrons.org/software/libmd/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
bat is a cat(1) clone with syntax highlighting and Git integration.
Signed-off-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adds the gocryptfs encrypted FUSE filesystem.
Currently uses without_openssl build tag, to use the native Go cryptography.
However, the package could be improved by conditionally enabling openssl if it
is also configured to be built by Buildroot.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
embiggen-disk is a tool to automatically resize disks to fill available space.
Patch submitted upstream: https://github.com/bradfitz/embiggen-disk/pull/13
Adds support for /dev/mmcblk0pN type paths.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a Go package that needs vendor modules to be downloaded at
build time.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Christian Stewart <christian@paral.in>
This reverts commit d19077677f, but the
package now uses the cargo-package infrastructure with its vendoring
mechanism, which allows us to avoid the problems that caused the
package to be removed in d19077677f.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
sdbus-c++ is a high-level C++ D-Bus library for Linux.
Signed-off-by: Sergey Bobrenok <bobrofon@gmail.com>
[Peter: add host-pkgconf, drop host package]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package adds the rtl8189es WiFi driver.
repo: https://github.com/jwrdegoede/rtl8189ES_linux.git
branch: master
Driver is known to support Realtek RTL8189ES-VB-CG chip.
Signed-off-by: Louis Aussedat <aussedat.louis@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
There is already a package adding Mali blobs for Sunxi Mali Utgard
GPUs. Many Rockchip SoCs feature a Mali Bifrost GPU and need specific
libraries provided under binary form with a non-GPL compliant license
by Rockchip. Package these libraries.
While the repository at https://github.com/rockchip-linux/libmali
supports many GPU variants, this package for now only supports the
Bifrost GPU blob. Support for other GPU blobs can be added later.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[Thomas:
- Rename to rockchip-mali, because it contains other blobs than
Bifrost ones
- Add missing entry in DEVELOPERS file
- Change BR2_arm to BR2_ARM_EABIHF as only EABIhf blobs are provided
for arm32
- Add BR2_TOOLCHAIN_HAS_THREADS inherited from libdrm.
- Expose as a libgbm provider.
- Drop the patch, which was not necessary.
- Rework the entire installation logic, to be much simpler.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libest is a C implementation of RFC 7030 (Enrollment over
Secure Transport).
It can be used to provision public key certificates from
a certificate authority (CA) or registration authority (RA)
to end-user devices and network infrastructure devices.
https://github.com/cisco/libest
Notes on patches included in this package:
- libest bundles a stubbed version of libsafec, and has no provision
to build against a system-installed full (non-stubbed) libsafec.
We add a patch to make that possible.
- Added a configuration option --{enable,disable}-examples to toggle
examples build by a separate patch.
- There's a configuration option `--enable-jni` which allows to build
a JNI library for binding libest to Java programs. And that library
would be using an outdated version of OpenSSL 1.0.
We fix that by adding support for OpenSSL 1.1 API for that library.
- Fixed a bug when specifying either `--enable-FEATURE` or `--disable-FEATURE`
has always been enabling the feature.
Signed-off-by: Aleksandr Makarov <aleksandr.o.makarov@gmail.com>
[Thomas:
- Added comments about the upstream status in existing patches
- Added a patch fixing an autoreconf issue
- Added a patch adding a missing "extern" on a variable to fix build
with gcc 10
- Removed the glibc dependency by using the new libexecinfo package
- Drastically simplified the complex libcoap disabling and client-only
mode vs. OpenJDK issue. libcoap support is now forcefully disabled,
and client-mode only option is made invisible when OpenJDK is
enabled.
- Fixed the license information;
- Added missing host-pkgconf
]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Agent is always enabled. Even though a server without agent is a valid
use case, the agent doesn't take much space compared to the server so
making it optional is not worth it.
Optional dependencies (openssl, libcurl, ...) are set globally, even
though they are supposedly only used for the server. However, this is
not so obvious from configure.ac so it's easy to accidentally miss one.
Setting them globally doesn't hurt.
The proxy, agent2 and webservice features are left disabled. agent2
requires go.
zabbix also has support for sqlite3 as database backend, but only for
the proxy, not for the server.
Signed-off-by: Alexey Lukyanchuk <skif@skif-web.ru>
[Arnout:
- BR2_TOOLCHAIN_USES_GLIBC implies the other glibc options.
- Fix wrapping in Config.in help text.
- Add upstream URL.
- Protect comments with "depends on" instead of "if".
- Select postgresl/mysql instead of depends (and propagate
dependencies).
- Remove redundant condition around
BR2_PACKAGE_ZABBIX_SERVER_COPY_DUMPS.
- Select PHP extensions instead of depends.
- Make optional dependencies automatic instead of Config.in.
- Improve some of the help texts.
- Bump to 5.4.9 and update hashes.
- Add COPYING as license file.
- Switch to actual upstream at zabbix.com.
- Explicitly disable all unused features.
- Disable zabbix user login with '*'.
- Don't add user to zabbix group twice.
- Do patch of zabbix_*.conf in post-patch hook and do it for all conf
files in one shot.
- Remove workarounds for pending patches (which were merged).
- Put web ui in /var/www/zabbix and SQL files in /var/lib/zabbix.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The way that python-pybind can be used is fairly complicated, so a
runtime test for it is convenient. In addition, this test validates that
the headers actually work at runtime.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
[Arnout:
- Retain python3 only.
- python-pybind is a target package, not host.
- Select python-pybind instead of depend.
- Simplify python-pybind-example package.
- Check in python-pybind-example build if pybind11.get_include()
produces output.
- Don't use python3 -m pybind11 --includes: it includes the main python
includes, which are for the host, not for the target.
- Use TestPythonPackageBase instead of open-coding something imported
with host python.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
A client interface for the Music Player Daemon.
[Peter: license is LGPL-3.0+, add DEVELOPERS entry]
Signed-off-by: Uladzimir Bely <wiselord1983@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is the io_uring library, liburing. liburing provides helpers to
setup and teardown io_uring instances, and also a simplified interface
for applications that don't need (or want) to deal with the full kernel
side implementation.
https://git.kernel.dk/cgit/liburing
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This causes warning on ./utils/get-developers:
WARNING: 'package/qt5/qt5webkit-examples/' doesn't match any file
because 'package/qt5/qt5webkit-examples/' has been removed, so let's remove
its entry in this file.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package provides a Mali kernel driver for Sunxi Mali Utgard GPUs. The
trailing -mainline is historical and was used at a time when there was
two packages providing this driver. The "non-upstream" package has
been removed some time ago so before adding new packages bringing
support for other ARM Mali GPU versions or implementations, rename
sunxi-mali-mainline-driver into sunxi-mali-utgard-driver.
Add a legacy entry.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Giulio: rebase on master. Add legacy entry instead of substituting the
blob's one]
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This package provides Mali libraries for Sunxi Mali Utgard GPUs. The
trailing -mainline is historical and was used at a time when there was
two packages providing these libraries. The "non-upstream" package has
been removed some time ago so before adding new packages bringing
support for other ARM Mali GPU versions or implementations, rename
sunxi-mali-mainline into sunxi-mali-utgard.
Add a legacy entry.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Giulio: rebase on master. Rename SUNXI_MALI_MAINLINE_REV to
SUNXI_MALI_UTGARD_REV in sunxi-mali-mailine-driver.mk and
BR2_PACKAGE_SUNXI_MALI_MAINLINE to BR2_PACKAGE_SUNXI_UTGARD in
sunxi-mali-mainline-driver/Config.in to respect bisectability]
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
[Build tested only]
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
[Arnout: also update existing select in Config.in.legacy]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This package provides the firmware for LS1028ARDB DP (display port).
Signed-off-by: Jerry Huang <jerry.huang@nxp.com>
[Arnout:
- move out of nxp directory;
- add extraction helper;
- set REDISTRIBUTE to NO.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This package was initially requested by José Pekkarinen, so he is
assigned as the maintainer for it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch will provide an initial package for bmx7 project.
Signed-off-by: José Pekkarinen <jose.pekkarinen@unikie.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
FreeIPMI provides in-band and out-of-band IPMI software based on the
IPMI v1.5/2.0 specification.
The IPMI specification defines a set of interfaces for platform
management and is implemented by a number vendors for system management.
The features of IPMI that most users will be interested in are sensor
monitoring, system event monitoring, power control, and serial-over-LAN
(SOL).
https://www.gnu.org/software/freeipmi/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add new defconfigs for sama7g5 evaluation kit.
Update README with new defconfigs.
Board uses linux 5.15 mainline.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Needed for the upcoming Nexus version of kodi-inputstream-adaptive,
the bundled version of bento4 was removed upstream:
70625e7670
Backported upstream commit to fix cmake install as patch 0001.
Added feature- and bugfix-patches from kodi, they were sent upstream:
https://github.com/axiomatic-systems/Bento4/issues/648
Build-tested using this defconfig:
BR2_PACKAGE_BENTO4=y
andes-nds32 [ 1/45]: SKIPPED
arm-aarch64 [ 2/45]: OK
bootlin-aarch64-glibc [ 3/45]: OK
bootlin-arcle-hs38-uclibc [ 4/45]: OK
bootlin-armv5-uclibc [ 5/45]: OK
bootlin-armv7-glibc [ 6/45]: OK
bootlin-armv7m-uclibc [ 7/45]: OK
bootlin-armv7-musl [ 8/45]: OK
bootlin-m68k-5208-uclibc [ 9/45]: OK
bootlin-m68k-68040-uclibc [10/45]: OK
bootlin-microblazeel-uclibc [11/45]: OK
bootlin-mipsel32r6-glibc [12/45]: OK
bootlin-mipsel-uclibc [13/45]: OK
bootlin-nios2-glibc [14/45]: OK
bootlin-openrisc-uclibc [15/45]: OK
bootlin-powerpc64le-power8-glibc [16/45]: OK
bootlin-powerpc-e500mc-uclibc [17/45]: OK
bootlin-riscv32-glibc [18/45]: OK
bootlin-riscv64-glibc [19/45]: OK
bootlin-riscv64-musl [20/45]: OK
bootlin-sh4-uclibc [21/45]: OK
bootlin-sparc64-glibc [22/45]: OK
bootlin-sparc-uclibc [23/45]: OK
bootlin-x86-64-glibc [24/45]: OK
bootlin-x86-64-musl [25/45]: OK
bootlin-x86-64-uclibc [26/45]: OK
bootlin-xtensa-uclibc [27/45]: OK
br-arm-basic [28/45]: SKIPPED
br-arm-full-nothread [29/45]: OK
br-arm-full-static [30/45]: OK
br-i386-pentium4-full [31/45]: OK
br-i386-pentium-mmx-musl [32/45]: OK
br-mips64-n64-full [33/45]: OK
br-mips64r6-el-hf-glibc [34/45]: OK
br-powerpc-603e-basic-cpp [35/45]: OK
br-powerpc64-power7-glibc [36/45]: OK
linaro-aarch64-be [37/45]: OK
linaro-aarch64 [38/45]: OK
linaro-arm [39/45]: OK
sourcery-arm-armv4t [40/45]: OK
sourcery-arm [41/45]: OK
sourcery-arm-thumb2 [42/45]: OK
sourcery-mips64 [43/45]: OK
sourcery-mips [44/45]: OK
sourcery-nios2 [45/45]: OK
45 builds, 2 skipped, 0 build failed, 0 legal-info failed
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
