There is no debug profile on cargo. The available profiles are: dev
(enabled by default), release, test and bench.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since Gitlab 12.9, Gitlab allow to trigger child pipeline with generated configuration file.
See: https://gitlab.com/gitlab-org/gitlab/-/issues/35632
This allow us to stop updating the .gitlab-ci.yml file when a
new defconfig is added to Buildroot.
Remove check-gitlab-ci.yml job since it is now uneeded.
Remove .gitlab-ci.yml make target.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
[ann.morin.1998@free.fr: manual: no longer needed to update at all]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As Cargo is either installed by host-rust or host-rust-bin, the
Cargo-based packages should depend on host-rustc.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
[Arnout: also select HOST_RUSTC in Config.in]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: David Pierret <david.pierret@smile.fr>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
So far in 2020, Logilin and Tap2Open made some financial donations to
the Buildroot Association, so let's thank them on our sponsors page.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Describe release engineering and development phases of the project.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the linux kernel will apply some fixups on its .config file,
based on whether some packages are enabled or not. That list of
conditional fixups is getting bigger and bigger with each new package
that needs such fixups, culminating with the pending firewalld one [0].
Furthermore, these fixups are not accessible to packages in br2-external
trees.
Add a new per-package variable, that packages may set to the commands to
run to fixup the kernel .config file, which is added at the end of the
linux' own fixups.
This opens the possibility to write things like;
define FOO_LINUX_CONFIG_FIXUPS
$(call KCONFIG_ENABLE_OPT,BLA)
endef
Of course, it also opens the way to run arbitrary commands in there, but
any alternative that would be declarative only, such as a list of
options to enable or disable (as an example):
FOO_LINUX_CONFIG_FIXUPS = +BAR -FOO +BUZ="value"
.. is not very nice either, and such lists fall flat when a value would
have a space.
For packages that we have in-tree, we can ensure they won't play foul
with their _LINUX_CONFIG_FIXUPS. For packages in br2-external trees,
there's nothing we can do; users already have the opportunity to hack
into the linux configure process by providing LINUX_PRE_CONFIGURE_HOOKS
or LINUX_POST_CONFIGURE_HOOKS anyway...
.. which brings the question of why we don't use that to implement the
per-package fixups. We don't, because _PRE or _POST_CONFIGURE_HOOKS are
run after we run 'make oldconfig' to sanitise the mangled .config.
[0] http://lists.busybox.net/pipermail/buildroot/2020-March/278683.html
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix a few punctuation mistakes. The removed link is redundant, see the
previous sentence.
Signed-off-by: Merlin Büge <merlin.buege@tuhh.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
With autoconf packages, we often specify ac_cv_func_... cached values to
avoid runtime checks during configure. With meson the equivalent is
setting properties in cross-compilation.conf which we cannot do in
Buildroot at the moment.
For example, libglib2 used to set ac_cv_func_printf_unix98 and
ac_cv_func_vsnprintf_c99 so that the system printf could be used, but
with the conversion to meson these checks fail and the gnulib fallback
is used.
Add infrastructure in the same way as FOO_MESON_EXTRA_BINARIES to allow
per-package modification to the cross-compilation properties.
Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Adam Duskett <aduskett@gmail.com>
[yann.morin.1998@free.fr: do a single substitution as in a1e3c7b693]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This provides generic functions for Qt5 qmake based packages. It will
make it possible to remove lots of redefinition of
QT5_xxx_{CONFIGURE|BUILD|INSTALL_STAGING}_CMDS. Additionally it
provides a generic target install method which will make most of the
package specific commands obsolete.
This is done by re-running the install step of the qmake generated
Makefile with the package build directory prepended (to the
staging/host path). Even though this does create lengthy pathes it
allows for easy separation of the staging files from the host destined
files by just omitting the resulting BUILD_DIR+HOST_DIR path from the
following rsync call to the real target folder. The cleanup of many
files we dont want in target is deferred to the target-finalize
step. In addition to what's being removed already, we also have to
cleanup some Qt5 specific files (prl) and the documentation directory.
This approach was chosen over copying all files recorded in the pkg-files-list
after some discussion which Thomas Petazzoni summed up:
"We don't yet use pkg-files-list really as part of the build
process anywhere, I feel a bit more comfortable at this point with what
Andreas is proposing."
Thanks to this infrastructure, it will be possible to get rid of the
many conditional install commands because qmake already takes care of
this when generating the Makefile install targets with the given or
autodetected configure options of each package.
However, custom install steps may have to remain in cases where a
particular Buildroot option has no corresponding setting in the
packages configuration options.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Unlike <PKG>_DEPENDENCIES, <PKG>_PATCH_DEPENDENCIES only guarantees
extract and patch of listed dependencies, not build. Make this subtlety
more explicit in the documentation.
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[yann.morin.1998@free.fr: slight fix]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a section to the support page for commercial support.
Add Mind, Bootlin and Smile in that section.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Package optional or choice config symbols are usually prefixed with the
package config symbol name. Rename BR2_PACKAGE_CURL to
BR2_PACKAGE_LIBCURL_CURL to conform.
Update references to the old name.
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The seperation of the fields in the hash file should be 2 spaces for
consitency
Update the manual accordingly.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr:
- drop the notes part, reword the first hunk
- update the examples
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Google also sponsored the meeting location for the developer days after
FOSDEM 2020.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The new text is unfortunately too long to fit in the box, so bump the
height to 400px for the top row.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This list dates back to 2012. Since a long time now Buildroot saves the
patches applied as well as the actual source code for some external
toolchains. Update the manual accordingly.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds a new manual section that captures an overview
of the run-tests tool, how to manually run a test and where to
find the test case script.
A brief set of steps is included to go through how to add a new
test case and suggestions on how to test/debug.
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[yann.morin.1998@free.fr:
- switch the creating and debugging sections
- minor reformatting
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update dependency documentation to detail the order-only relationship
associated with the DEPENDENCIES variable. See the thread at [1] for
details.
[1] http://lists.busybox.net/pipermail/buildroot/2019-October/262685.html
Signed-off-by: Dan Walkes <danwalkes@trellis-logic.com>
[yann.morin.1998@free.fr: indentation & slight rephrasing]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
since v234 upstream recommands using systemctl preset-all to enable units.
* add a buildroot specific preset file
* use that file to disable getty@tty1
* make systemd depend on host-systemd
* remove all link-creating code that systemd does for us.
Most packages will not be affected by this change, but a few packages
were installing units without manually enabling them. Those packages
will now be automatically enabled.
The fact that those packages were not enabled is almost certainly a bug,
but it is a change of behaviour that needs to be reported
host-systemd also builds udevadm for the host. That means we no longer
need to depend on host-eudev to provide udevadm (that would conflict).
Signed-off-by: Jérémy Rosen <jeremy.rosen@smile.fr>
[yann.morin.1998@free.fr:
- also remove the hwdb sources on fs generation
- fix check-package errors
- few typoes and reformatting in commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As suggested by Arnout Vandecappelle, this commit adjusts the
generic-package documentation to document the effect of per-package
directory support on HOST_DIR, STAGING_DIR and TARGET_DIR.
Suggested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: change version reference to Buildroot 2020.02]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update the documentation for the output/host/ directory to mention
that it contains the sysroot for the target toolchain, as well as the
host tools required for running buildroot.
Update the staging/ documentation to reflect that it is a link to the
target toolchain sysroot in the host/ directory.
Signed-off-by: Michael Drake <michael.drake@codethink.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Laurent reported that a short tutorial was missing in the manual to
explain how to reuse a Buildroot toolchain as external toolchain.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Laurent Guillier <laurent.guillier@smile.fr>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas: completely rewrite the thing]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit 6eacea5a (support/kconfig: bump to kconfig from Linux
4.17-rc2), xconfig uses Qt5, so update prerequisite.txt to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, the formatting we impose on the _LICENSE variable requires
that we also use the rarely used := assignment operator, which makes
the _LICENSE variable the only variable that users have to write with
this operator.
This really departs from the simplicity and consistency of using the
append-assignment, which we use for every other variable.
This is because the append-assignment operator surreptiously
introduces a space between the original value and the appended one. But
we can use this knowledge, to match any instance of a space followed by
a comma, and turn it into a single comma.
This allows users to now have a consistent use of the '=' and '+='
operators we use everywhere else in .mk files.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, we only require a gcc 4.4 version, which now is pretty old
(released in April 2009). This requirement is not even tested nowadays,
with our oldest autobuilder having a 4.7 version only.
And even then, 4.7 is still old enough that it prevents us from
upgrading some packages. For example cmake 3.10+ requires C++11
constructs that were only added in gcc 4.8 (when C++11 support was
finally completed in gcc).
So, update our requirements for gcc to at least 4.8.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since <package>-rebuild implies <package>-reinstall and
<package>-reconfigure implies <package>-rebuild, it is confusing
to mention the make and make <package> commands when describing
the restart of the configuration, compilation and installation of
the package.
Therefore remove the ", followed by +make+ or +make <package>+"
portions in the "8.3. Understanding how to rebuild packages" section,
and add a new paragraph clarifying how to include the rebuilt package
in the filesystem image, if that is necessary.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Back in commit 025b863e6f, the option
BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS was introduced, to
separate the option that host packages needing Rust should depend on
(BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS) from the option that target
packages needing Rust should depend on
(BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS).
Since the example in the manual is showing a target package, we must
use BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Sam Voss <sam.voss@gmail.com>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The service we were using for cors proxing disappeared rendering the
bottom part of website not working.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
meson does not allow passing path to helper programs (e.g. pkgconfig)
using variables in the environment. Instead, it insists that those paths
be defined in the cross-compilation.conf file, in the [binaries]
section [0]
As such, allow packages to declare such a list of arbitrary entries to
add in the [binaries] section.
[0] https://github.com/mesonbuild/meson/issues/3327 for the LLVM_CONFIG
example, which we'll address in a follow-up patch.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: McCabe, Robert J <robert.mccabe@rockwellcollins.com>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add an OpenRC service that starts and stops sysv-init scripts. We order
that script 'after local' so that it is started after all other native
openrc services.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
[yann.morin.1998@free.fr:
- don't propagate the micro optimisation for running .sh scripts
- use spaces, not TABs
- stop services in reverse order
- reword commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If follow through the customize-outside-br.txt with how to add external
toolchain in br-ext tree then one thing is missing - inclusion of
*.mk file with external toolchain package description.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Python packages should no longer depend on BR2_PACKAGE_PYTHON in their
config file, unless they are only compatible with Python 2.
Signed-off-by: Raphaël Mélotte <raphael.melotte@essensium.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, the packages are sorted smallest first, and biggest last
(with unknown and others second-to-last and last, resp.).
Add an option to invert the ordering (but keeping unknown and others at
their current positions).
This has the nice side effect that we can now control the colours
assigned to the biggest package(s), as the colours are cycled from the
first to the last. Currently, the biggest packages gets a redish colour,
which is appropriate, but the second gets a greenish one, which is not
as appropriate (but changing that can come later).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When dealing with embedded devices, storage is more often than not some
kind of flash device, on which the memory is usually counted as powers
of 1024 instead of powers of 1000. As such, people may prefer reports
using IEC prefixes [0] instead of the SI prefixes.
Add an option to that effect.
We use argparse's ability to use custom actions [1] [2], to provide a
set of options that act on a boolean, but has a single help entry and
internally ensures consistency of the settings. We could have been using
the more conventional store_true/store_false actions instead, but that
would have meant either two help entries, one for each set of options,
and/or some logic after parse_args() to check the validity of the
settings.
[0] https://en.wikipedia.org/wiki/Binary_prefix
[1] https://docs.python.org/2/library/argparse.html#action
[2] https://docs.python.org/2/library/argparse.html#argparse.Action
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, we group packages that contribute less then 1%, into the
"Other" category.
However, in some cases, there can be a lot of very comparatively small
packages, and they may not exceed this limit, and so only the "Others"
category would be displayed, which is not nice.
Conversely, if there are a lot of packages, most of which only so
slightly exceeding this limit, then we get all of them in the graph,
which is not nice either.
Add a way for the developers to pass a different cut-off limit. As for
the dependency graph which has BR2_GRAPH_DEPS_OPTS, add the environment
variable BR2_GRAPH_SIZE_OPTS to carry those extra option (in preparation
for more to come, later).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[Arnout:
- remove empty base class definition from Config;
- use parser.error instead of ValueError for invalid argument.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In this commit, we:
- move the sponsors of the Buildroot Meeting at ELCE 2018 to "Past
Sponsors"
- move Scaleway, as a sponsor of Hackathon in Paris in 2018 to "Past
Sponsors"
- merge the Free Electrons and Bootlin entries together in "Past
Sponsors"
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Smile is going to provide the meeting room for the 3 days of our
meeting on October 25-27 in Lyon, France, right before the Embedded
Linux Conference Europe.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Briefly states what the output of this target is about.
Signed-off-by: Marcel Patzlaff <m.patzlaff@pilz.de>
[Thomas: improve wording]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add documentation about how a br2-external tree can provide an external
toolchain or a libjpeg or openssl alternative implementation.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This rule was added back in 9429e7b698 (core: introduce an intermediate
rule before the configurators) when the kconfig-side br2-external file
was generated separately from the Makefile-side one.
Now that they are generated together very early in the Makefile, we no
longer need this intermediate rule. Drop it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
[Peter: also drop outdated reference in the manual]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the two (all of them!) br2-external related files are generated
in the same location, it makes sense they are named after the same
pattern.
When initial support for (then single) br2-external trees was added back
in a4239f7fd1 (core: introduce the BR2_EXTERNAL variable), it was not
clear-cut why that file was not named with a br2 prefix.
So rename it now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Apparently, patchwork only recognizes the 'Fixes' tag if it is followed
by a colon. So make sure the manual documents it as such.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Meson does not allow to pass CFLAGS/LDFLAGS/CXXFLAGS via the environment
or via command-line arguments or options (instead, those flags from the
environment are passed to the host compiler, which is seldom what we
need). The only way to pas those flags is via the cross-compilation.conf
file.
Add LIBFOO_CFLAGS, LIBFOO_LDFLAGS and LIBFOO_CXXFLAGS variables to allow
packages to provide their own flags, possibly overriding the generic
ones entirely, as we allow for other infras. Those per-package flags will
then be used to generate the per-package cross-compilation.conf.
This means that the meson infra is the first and only infra for which
FOO_CFLAGS, FOO_LDFLAGS, and FOO_CXXFLAGS are meaningful, while for the
other infras, they are just variables private to the package itself.
Instead of naming those variables after the meson infra (e.g.
FOO_MESON_CFLAGS), we name them with a generic name, as maybe, just
maybe, we could also change the other infras to also recognise those
variables.
Just like for the HOST_MESON_SED_CFLAGS etc., we need to add auxiliary
variables to do convert the shell-formatted argument list into the
JSON-formatted list that meson expects. We can't use a pure-make
construct because the CFLAGS can contain quoting that needs to be
expanded by the shell. Similarly, we need a condition on the strip'ed
variable to avoid passing empty arguments.
To mimic this feature for packages that are built from the SDK, we also
install a templatised version of cross-compilation.conf, with three new
placeholders for custom flags. If a user wants to build a package that
needs custom flags, they can use that template to generate a per-package
cross-compilation.conf.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Adam Duskett <aduskett@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* package/pkg-generic.mk
Add <pkg>_INSTALL_INIT_OPENRC so packages can define their own steps
to install openrc service scripts.
* docs/manual/adding-packages-generic.txt
update documentation about new hook.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In particular, the manual was incorrect when the user had selected an
out-of-tree build.
Signed-off-by: Charlie Turner <cturner@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With this you can add:
$(eval $(host-golang-package))
to a package .mk file to build for host.
Signed-off-by: Mirza Krak <mirza.krak@northern.tech>
Acked-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Tested-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The hidden Config.in option BR2_PACKAGE_HOST_GO_ARCH_SUPPORTS name is
not very clear as to whether it says whether Go is available for the
target architecture or the host architecture.
Until now, this was fine since there was support for host Go
packages. But as we are about to introduce support for building host
Go packages, we need to clarify the meaning of
BR2_PACKAGE_HOST_GO_ARCH_SUPPORTS. Since it says whether the target
architecture has support for Go or not, we rename it to
BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS.
And since BR2_PACKAGE_HOST_GO_CGO_LINKING_SUPPORTS is tightly related,
we rename it to BR2_PACKAGE_HOST_GO_TARGET_CGO_LINKING_SUPPORTS.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Tested-by: Adam Duskett <aduskett@gmail.com>
[Thomas: entirely rewrite commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a 'VARS=...' setting to the example. To make it clear that several
variables can be specified, use two variables in the first example.
Only 2 variables are printed, so the ... is removed.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It is buildroot-association@buildroot.org, not @lists.buildroot.org.
Reported-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As noticed by Yann E. Morin, the address of the Paypal account is
@buildroot.org, not @lists.buildroot.org.
Reported-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For about two years, a legal entity called "Buildroot Association" was
created in France to support the Buildroot project. Until fall 2018,
this legal entity has not been used. In fall 2018, we started using it
in order to receive donations from companies in order to organize the
Buildroot Developers Meeting that took place before the Embedded Linux
Conference Europe 2018 in Edinburgh.
This commit creates a new page on our web site that documents the
existence of this Buildroot Association, and details how to become a
member. Both individuals and companies can become members.
It is worth stating that the Buildroot Association does not control
the Buildroot project: it remains a fully open-source and
community-driven project. The Buildroot Association only serves as a
legal entity to handle donations and money needed to organize the
Buildroot Developers Meeting, and pay for a few expenses related to
the project (such as domain names).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Arnout: small improvements]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
No functional change is brought by this modification.
This patch:
* removes redundant <pkg>_SRCDIR and <pkg>_BUILDDIR declarations
(already defined in pkg-generic.mk)
* documents the usage of <pkg>_SUBDIR in the python-specific section of
the manual.
Signed-off-by: Lionel Orry <lionel.orry@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
No functional change is brought by this modification.
This patch:
* removes a redundant <pkg>_SRCDIR declaration (already defined in
pkg-generic.mk)
* documents the usage of <pkg>_SUBDIR in the meson-specific section of
the manual.
Signed-off-by: Lionel Orry <lionel.orry@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In the Buildroot manual, it is specified that the Waf-based
infrastructure supports the <pkg>_SUBDIR variable, which was not true.
This patch:
* makes use of this variable by changing to the given sub-directory
before executing waf commands,
* documents the usage of <pkg>_SUBDIR in the waf-specific section of
the manual.
Signed-off-by: Lionel Orry <lionel.orry@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a step to target-finalize that checks each rootfs overlay, following
the criteria established for custom skeletons and using the same script
uesd by skeleton-custom.mk.
Add a paragraph to the documentation clarifying that rootfs overlays
don't need to contain /bin, /lib or /sbin and must not contain them when
BR2_ROOTFS_MERGED_USR is enabled.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
skeleton-custom does not install the required /bin, /lib and /sbin
directories (or symlinks), which may result in an imcomplete tree, The
user could add the required directories/symlinks to the skeleton but
they may be invalid, depending on the state of BR2_ROOTFS_MERGED_USR.
Steps to reproduce:
- Enable BR2_ROOTFS_MERGED_USR and BR2_INIT_SYSTEMD
- Set BR2_ROOTFS_SKELETON_CUSTOM_PATH to "system/skeleton"
- Run "make skeleton"
- target/{bin.lib,sbin} will not exist
Add calls to SYSTEM_USR_SYMLINKS_OR_DIRS to INSTALL_TARGET_CMDS and
INSTALL_STAGING_CMDS, so the required directories or symlinks are
created.
Add a paragraph to the documentation clarifying that custom skeletons
don't need to contain /bin, /lib or /sbin and must not contain them when
BR2_ROOTFS_MERGED_USR is enabled.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some statements are missing their semicolons.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Acked-by: <angelo@amarulasolutions.com>
Tested-by: <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With javascript, when comparing variables, using === instead of ==
is preferred.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Acked-by: <angelo@amarulasolutions.com>
Tested-by: <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In javascript, let is preferred for local, var is preferred for global.
Change any local variables from "var" to "let"
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Acked-by: <angelo@amarulasolutions.com>
Tested-by: <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch rework the use of query.yahooapis.com to do the conversion
from xml to json required by our script and moves to the use of a js
library. Datas are therefore now converted in json format on the client.
Unfortunately, cause of the CORS restriction on nabble and
buildroot.org, we cannot retrieve directly the xml data from these
servers and we need a CORS proxy to do that.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[Peter: use sha256 integrity]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some of our cdn's are going discontinued (rawgit) and some others are
not recommended anymore, thus we update to the recommended cdnjs.
This patch enables also SRI protection on js to be sure the modules we
download are not manipulated in any way.
About SRI:
https://developer.mozilla.org/en-US/docs/Web/Security/Subresource_Integrity
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We now require python 2.7+, so update prerequisite.txt to match.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit updates package-make-target.txt with a few additional
useful per-package targets that have been added in recent times.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, our commit titles are not very well standardized, and it
would be great to standardize them a little bit more. A number of
people use "<pkg>: " as prefix, others use "package/<pkg>: ". Some
people start the rest of the commit title (after the prefix) with an
upper-case letter, some with a lower-case letter.
In an attempt to standardize this, this commit updates the manual with
some examples of good commit titles.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Carlos Santos <casantos@datacom.com.br>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The script is utils/get-developers but the manual refers to get-developer in
several places.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This addon allows to generate a Buildroot package from a Luarocks
package definition.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some packages may want to build only specific targets, instead of the
default.
So, allow them to provide FOO_NINJA_OPTS (not really options, but we
just mimicked the naming we already have for autotools packages).
Update the manual accordingly.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
external.desc must be present when using a br2-external tree. The
documentation notes this later in the text, but the file is missing
from the initial overview of files.
Fixes bug #11481.
Signed-off-by: Philipp Wagner <mail@philipp-wagner.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This variable is needed for upgrading packages with scancpan.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tk Open Systems has sponsored the Buildroot Association to organize
the Buildroot Developers Meeting.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Explain how this can be used with git send-email, and how git can be
configured to use it automatically.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As discussed in [1], our guideline for the ordering of 'depends on'
lines is not written down. Fix that.
[1] http://lists.busybox.net/pipermail/buildroot/2018-October/232413.html
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Better late than never: let's thank Scaleway who provided some
excellent hosting conditions for our March 2018 Hackathon in Paris.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit removes Google and Mind as "Current sponsors" and credits
them as "Past sponsors" for the FOSDEM 2018 Buildroot Developers
Meeting.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Due to excessive spamming on Freenode, the IRC channel is currently
restricted to registered users. Since this may not be obvious for
people not familiar with IRC, let's mention it on our website, with a
link to the relevant documentation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some users of kconfig need some packages to be built before their
kconfig infra be used.
For example, the linux kernel, starting with 4.16, needs flex and bison
to generate the parser code. Furthermore, starting with 4.18, it will
also need the cross-compiler before parsing the kconfig stuff, because
that calls the compiler to check its features.
Currently, this is broken, even the flex/bison ones, even though they
are listed, because there is no way to define dependencie that are
guaranteed before the (visual) configurators. For example:
$ make distclean
$ make menuconfig
--> enable the linux kernel, choose a defconfig, save, exit
$ make linux-menuconfig
[...]
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
YACC scripts/kconfig/zconf.tab.c
/bin/sh: bison: command not found
LEX scripts/kconfig/zconf.lex.c
scripts/Makefile.lib:196: recipe for target 'scripts/kconfig/zconf.tab.c' failed
make[3]: *** [scripts/kconfig/zconf.tab.c] Error 127
make[3]: *** Waiting for unfinished jobs....
/bin/sh: flex: command not found
scripts/Makefile.lib:188: recipe for target 'scripts/kconfig/zconf.lex.c' failed
make[3]: *** [scripts/kconfig/zconf.lex.c] Error 127
Makefile:528: recipe for target 'rpc_defconfig' failed
make[2]: *** [rpc_defconfig] Error 2
linux/linux.mk:511: recipe for target '/home/ymorin/dev/buildroot/buildroot/output/build/linux-4.17.11/.config' failed
make[1]: *** [/home/ymorin/dev/buildroot/buildroot/output/build/linux-4.17.11/.config] Error 2
Makefile:79: recipe for target '_all' failed
make: *** [_all] Error 2
So, we introduce a new type of dependencies for kconfig-based packages,
that are guaranteed to be built and installed before the (visual)
configurators are called.
Since those dependencies are phony targets and therefore always out of
date, a normal dependency would cause the .config target to be rebuilt
on each invocation of make. So we use an order-only pre-requisite, like
is done for the patch dependency.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, the wording in the manual instructs the user to generate a
tarball from "the contents of the +output/host+ directory".
This is pretty confusing, because taken literally, this would amount to
running a command like:
tar cf my-sdk.tar -C output/host/ .
This creates a tarbomb [0], which is very bad practice, because when
extracted, it creates multiple files in the current directory.
What one really wants to do, is create a tarball of the host/ directory,
with something like:
tar cf my-sdk.tar -C output host/
However, this is not much better, because the top-most directory would
have a very common name, host/, which is pretty easy to get conflict
with when it gets extracted.
So, we fix that mess by giving the top-most directory a recognisable
name, based on the target tuple, which we also use as the name of the
archive (suffixed with the usual +.tar.gz+.) We offer the user the
possibility to override that default by specifying the +BR2_SDK_PREFIX+
variable on the command line.
Since this is an output file, we place it in the images/ directory.
As some users expressed a very strong feeling that they do not want to
generate a tarball at all, and that doing so would badly hurt their
workflows [1], we actually prepare the SDK as was previously done, but
under the new, intermediate rule 'prepare-sdk'. The existing 'sdk' rule
obviously depend on that before generating the tarball.
We choose to make the existing rule to generate the tarball, and
introduce a new rule to just prepare the SDK, rather than keep the
existing rule as-is and introduce a new one to generate the tarball,
because it makes sense to have the simplest rule do the correct thing,
leaving advanced, power users use the longest command. If someone
already had a wrapper that called 'sdk' and expected just the host
directory to be prepared, then this is not broken; it just takes a bit
longer (gzip is pretty fast).
Update the manual accordingly.
[0] https://en.wikipedia.org/wiki/Tar_(computing)#Tarbomb
[1] http://lists.busybox.net/pipermail/buildroot/2018-June/thread.html#223377
and some messages in the ensuing thread...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Stefan Becker <chemobejk@gmail.com>
Cc: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: "Yann E. MORIN" <<a href="mailto:yann.morin.1998@free.fr" target="_blank">yann.morin.1998@free.fr</a>><br>
Reviewed-by: Stefan Becker <chemobejk@gmail.com>
Signed-off-by: "Yann E. MORIN" <<a href="mailto:yann.morin.1998@free.fr" target="_blank">yann.morin.1998@free.fr</a>><br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The oldest gcc that is known to work with current Buildroot is that of
RHEL 6, version 4.4.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
