liblockfile.so.1.0 gets installed into /usr/lib, not /lib, so the target
install make target is always considered out-of-date.
Do various cleanups while we're here.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libuuid.so gets installed into /usr/lib, not /lib, so the target
install make target is always considered out-of-date.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The source target was broken until very recently, and it doesn't build
as it tries to use the host compiler for the client stuff, so there
cannot be many users of it.
People should use avahi instead nowadays, so so just remove it instead
of hacking it to work.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix various breakage in the imagemagick build:
- libWand.* is now called libMagickWand.*
- libMagic.* is now called libMagickCore.*
- References to wrong version numbers in directories
- Libraries missing from clean target
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We have been passing -q to ./configure when using 'make -s' for
packages using Makefile.autotools.in for some time. Do the same
for packages using autotools, but not using the
Makefile.autotools.in infrastructure, taking care to not do it
for packages with hand written configure scripts.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Positive logic is easier to read and understand than something
like 'if not option=yes then foo else bar'.
Signed-off-by: Michael Roth <mroth@nessie.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Depend on dbus being compiled with expat support and not just on expat
being enabled, as you can have expat enabled and still compile dbus
with libxml2 support instead.
While we're at it, only show comment about unforfilled dependencies if
dbus is enabled.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
dbus-glib needs dbus to be compiled with expat support, so prefer that
mode even if libxml2 is also enabled.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reported by Emmanuel Riou <riou.emmanuel@googlemail.com>.
With the recent change to use $(TOPDIR)/dl as default for $(DL_DIR)
(416323e93), DL_DIR is now a relative path (./dl), which breaks the
mpfr patch handling as it changes dir.
Fix is by using patch-kernel instead of calling patch, which does
the right thing.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reported by Sven Neumann <s.neumann@raumfeld.com>
Use LIBGLIB2_HOST_BINARY instead of the non-existing $(HOST_GLIB)
variable to refer to the host version of glib-genmarshal.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Upstream openssl doesn't have avr32 support, and we dropped the
avr32 optimization patch some time ago.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
To reflect the new output directory hierachy rename the Makefile variable
TOOL_BUILD_DIR to TOOLCHAIN_DIR.
Signed-off-by: Michael Roth <mroth@nessie.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The samba configure scripts detects the presence of fam and avahi
headers in order to decide whether support for fam and/or avahi should
be built into samba. This patch adds the missing dependencies so that
fam and/or avahi are built before samba if they are selected in buildroot.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#301
The libsmbclient library is part of the samba package. It can be used
to build applications that access Samba shares without the need to
mount them. Currently the library is explicitly not installed by
buildroot. Here's a patch that adds a config option to install it.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The avahi-client library makes use of threads. We need to link the
smbd binary with -pthread if avahi support is enabled. Otherwise the
binary will crash at startup.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If we have set BR2_PACKAGE_PYTHON_PY_ONLY or BR2_PACKAGE_PYTHON_PY_PYC
we want .py files to be left on the target, whatever the value of
BR2_PACKAGE_PYTHON_DEV.
Signed-off-by: Will Newton <will.newton@gmail.com>
libmicrohttpd is a library that allows embedding an HTTP server into
an application with a small code and memory footprint.
Signed-off-by: Will Newton <will.newton@gmail.com>
PKG_CONFIG_PATH adds a path to the pkg-config search path, but this is not
enough when we are building host tools - the host pkg-config default path
is still used, and this will pick up .pc files in the staging_dir tree.
PKG_CONFIG_LIBDIR overrides the pkg-config default path and ensures only
host .pc files are found. This fixes a pango build failure when building
for the host with cairo PNG support enabled.
Signed-off-by: Will Newton <will.newton@gmail.com>
This release of autoconf brings a number of bug fixes, including a change
to the autoreconf script to pass the correct include path parameter to
aclocal.
Signed-off-by: Will Newton <will.newton@gmail.com>
- bumb version to v1.4.5
- add fix for --disable-ipv6 option
(upstream bug: http://bugzilla.netfilter.org/show_bug.cgi?id=608)
Signed-off-by: Olaf Rempel <razzor@kopf-tisch.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#477
Peter: minor tweaks:
- sdl_snd -> sdl_sound
- cleaned up help text
- don't transform binary name
- add option to keep playsound/playsound_simple - Off by default
- fix uninstall when BR2_HAVE_DEVFILES isn't enabled
Signed-off-by: Evan Zelkowitz <evan.zelkowitz@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#565
- Bump version from 1.2 to 1.4.12
- Clean up makefile and use Makefile.autotools.in.
Signed-off-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Udhcp got integrated into busybox a long time ago, and the udhcp package
wasn't even included in package/Config.in, so it couldn't be used.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#617
netkittelnet needs netkitbase, which in term needs RPC support in
toolchain, so adjust Kconfig dependencies to ensure this.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In the output directory, we now have
- build/ where all the packages are built
- images/ where the final kernel and rootfs images are stored
- staging/ the staging directory (containing the development files
and libraries compiled for the target)
- target/ which contains the target root filesystem
- host/ which contains all the host programs
- stamps/ which contains the stamps files
Therefore, the build_ARCH and toolchain_build_ARCH have been
removed. People willing to use the same Buildroot sources to compile
for different architectures are invited to use the O= command line
option for out-of-tree compilation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The "project" feature was designed to allow to several projects to be
built inside the same Buildroot source tree and allowing the toolchain
and non-configurable packages to be shared between the different
projects on the same architecture. While being interesting in theory,
this feature adds a level of complexity to Buildroot, both from an
user perspective and from a developer perspective, while one of the
main Buildroot strengh is to be simple. Moreover, this feature is only
seldomly used by our users.
From a user-level perspective, this for example allows to remove the
project_build_ARCH directory, which was very confusing. The
autotools-stamps directory is also removed, since these stamps are
back at their normal location.
Description of the changes involved :
* project/, directory removed
* Makefile
- Don't include project/Makefile.in and project/project.mk anymore
- Grab a copy of the contents of project/Makefile.in at the
location it was imported, but remove the definition related to
PROJECT_BUILD_DIR. The TARGET_DIR is now in
$(BUILD_DIR)/target_dir
- Remove the creation/removal of the $(PROJECT_BUILD_DIR) and
$(PROJECT_BUILD_DIR)/autotools-stamps directories
- Don't make world depends on target-host-info. This target was
defined by project/project.mk to customize /etc/issue,
/etc/hostname and create /etc/br-version depending on the
project definitions. We can of course imagine re-adding such a
feature later.
- Replace PROJECT_BUILD_DIR by BUILD_DIR everywhere
- Remove the update, log and lognr.$(PROJECT) target, they were
specific to the project feature.
* package/Makefile.autotools.in
- Replace PROJECT_BUILD_DIR by BUILD_DIR for the location of the
configure cache
- Move the INSTALL_TARGET and HOOK_POST_INSTALL stamps to the same
directory as the other stamps (i.e, in the package directory).
* package/Makefile.in
- Replace PROJECT_BUILD_DIR by BUILD_DIR for the location of the
configure cache
* package/at/at.mk,
package/busybox/busybox.mk,
package/busybox/initramfs.mk,
package/customize/customize.mk,
package/linux-fusion/linux-fusion.mk,
package/ltp-testsuite/ltp-testsuite.mk,
package/nfs-utils/nfs-utils.mk,
target/cpio/cpioroot.mk,
target/cramfs/cramfs.mk,
target/device/Atmel/DataFlashBoot/DataflashBoot.mk,
target/device/Atmel/Makefile.in,
target/device/Atmel/at91bootstrap/at91bootstrap.mk,
target/device/KwikByte/Makefile.in,
target/ext2/ext2root.mk,
target/initramfs/initramfs.mk,
target/iso9660/iso9660.mk,
target/jffs2/jffs2root.mk,
target/linux/Makefile.in,
target/romfs/romfs.mk,
target/squashfs/squashfsroot.mk,
target/tar/tarroot.mk,
target/ubifs/ubifsroot.mk
- Replace PROJECT_BUILD_DIR by BUILD_DIR
* target/device/Config.in
- Do not include project/Config.in anymore
* target/linux/Makefile.in.advanced
- Replace PROJECT_BUILD_DIR by BUILD_DIR
- Store the stamps file in $(STAMP_DIR) instead of
$(PROJECT_BUILD_DIR)/autotools-stamps
* target/u-boot/Makefile.in
- Replace PROJECT_BUILD_DIR by BUILD_DIR
- Remove $(PROJECT) from the U-Boot target binary name
- Remove the insertion in the configuration of the project name as
the hostname
- The u-boot-autoscript target now generates
$(U_BOOT_AUTOSCRIPT).img instead of
$(U_BOOT_AUTOSCRIPT).$(PROJECT)
* toolchain/gcc/gcc-uclibc-3.x.mk
toolchain/gcc/gcc-uclibc-4.x.mk
- Move the stamps files to $(STAMP_DIR)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Closes#587
- bump version to 1.4.4
- iptables-optional-ipv6.patch no longer needed (included in upstream)
- use ipXtables-multi binaries with symlinks to ipXtables, ipXtables-save,
ipXtables-restore instead of 3 distinct binaries
Signed-off-by: Olaf Rempel <razzor@kopf-tisch.de>
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
DiVine is the DirectFB virtual input extension.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
