In commit 879fa7f82a, the
BR2_INIT_SYSTEMD option was changed to allow selecting with a uClibc
toolchain. Unfortunately, the corresponding Config.in comment, which
was already bogus, was not updated to take into account the numerous
dependencies of BR2_INIT_SYSTEMD.
Due to this, even if you have uClibc enabled, the BR2_INIT_SYSTEMD
option may not be visible, and the Config.in comment may also not be
visible, leaving the user in the dark.
This commit fixes the dependencies of the Config.in comment so that
they match the one of the BR2_INIT_SYSTEMD option.
Reported-by: Raphael Jacob <r.jacob2002@gmail.com>
Cc: Raphael Jacob <r.jacob2002@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The PAGER environment variable is including a blank character at the
end. Remove this.
A for loop has been unsetting the variable inside the loop, this is only
needed once at the end of the loop.
Signed-off-by: Florian La Roche <F.LaRoche@pilz.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some applications, e.g. bashs process subsitution feature, rely on the
convention of `/dev/fd` being a symbolic link to `/proc/self/fd`.
When a static /dev is used on a readonly rootfs then the runtime ln
invocations in the inittab will fail, so we need to add the symlinks at
build time. Makedevs doesn't support creating symlinks, so instead add the
symlinks to the default skeleton.
For non-static /dev setups, the kernel will mount devtmpfs which shadows the
/dev of the rootfs, but then the runtime ln invocations in inittab will
create the symlinks.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We need to disable any systemd parts using either IDN, NSS or gshadow.
IDN is only disabled in C library function call to getnameinfo(),
it does not effect libidn/libidn2 usage in systemd.
Tested with qemu-system-arm.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Only busybox and sysvinit handle the BR2_TARGET_GENERIC_GETTY_TERM and
BR2_TARGET_GENERIC_GETTY_OPTIONS options; the other init systems do
not.
So, protect those options behind appropriate dependencies on busybox
or sysvinit.
Fixes#10301.
Reported-by: Michael Heinemann <posted@heine.so>
Suggested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The skeletons are based on the selection of BR2_INIT_*, so add init- to
the package name to make this clearer. While skeleton-sysv is relatively
clear, skeleton-common and skeleton-none are less clear on their
relationship to BR2_INIT_*. So rename skeleton-sysv to conform to a
clearer pattern.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The skeletons are based on the selection of BR2_INIT_*, so add init- to
the package name to make this clearer. While skeleton-systemd is
relatively clear, skeleton-common and skeleton-none are less clear on
their relationship to BR2_INIT_*. So rename skeleton-systemd to conform
to clearer pattern.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The skeletons are based on the selection of BR2_INIT_*, so add init- to
the package name to make this clearer. The name skeleton-none implies no
skeleton at all, not a base skeleton with no init-specific files.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the rootfs is readonly, systemd will expect /var to be writable.
Because we do not really have a R/W filesystem to mount on /var, we make
it a tmpfs [*], and use the systemd-tmpfiles feature to populate it with
"factory" defaults.
We obtain those factory defaults by redirecting /var to that location at
build time, using a symlink /var -> /usr/share/factory which is the
location in which systemd-tmpfiles will look for when instructed to
"recursively copy" a directory.
With a line like:
C /var/something - - - -
it will look for /usr/share/factory/something and copy it (recursively
if it is a directory) to /var/something, but only if it does not already
exist there.
We also mark this copy with the exclamation mark, as it is only safe to
copy on boot, not when changing targets.
To be noted: the real format for such lines are:
C /var/something - - - - /from/where/to/copy/something
But if the source is not given, then it is implicitly taken from
/usr/share/factory (which in our case is as-good a location as whatever
else, so we use it, and thus we need not specify the source of the
copy).
Note that we treat symlinks a little bit specially, by creating symlinks
to the factory defaults rather than copying them.
Finally, /var at build time is a symlink, but at runtime, it must be a
directory (so we can mount the tmpfs over there). We can't change that
as a target-finalize hook, because:
- some packages may want to set ownership and/or access rights on
files or directories in /var, and that only happens while assembling
the filesystem images; changing /var from a symlink to a (then
empty) directory would break this;
- /var would be a directory on sub-sequent builds (until the next
"make clean").
Instead, we use the newly-introduce pre- and post-rootfs command hooks,
to turn /var into a directory before assembling the image, and back to a
symlink after assembling the image.
[*] People who want the factory-defaults only on first boot will have
to tweak the fstab to mount something else than a tmpfs on /var.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For systemd, we create a simple /etc/fstab with only an entry for /, as
systemd otherwise automatically mounts what it needs where it needs it.
systemd does not like that the content of /var be symlinks to /tmp,
especially journald that starts before /tmp is mounted, and thus the
journal files are hidden from view, which causes quite a bit of fuss...
Instead, move the current /var to a sysv-only skeleton.
systemd at install time will create the /var content it needs, so we
just create an empty /var for systemd.
systemd would create /home and /srv at runtime if they are missing, but
it is better to create them right now, to simplify supporting systemd on
a RO filesystem in the (near) future.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we use the same skeleton for sysv-like init systems and
systemd, even though systemd has some peculiarities that makes our
default skeleton unfit.
So, we'll need to provide different skeletons (really, only part of
it) for sysv-like and systemd. In addition, in order to support the
"no init system" (BR2_INIT_NONE) use case, we introduce a "none"
skeleton.
Introduce three new skeleton packages, aptly named skeleton-sysv,
skeleton-systemd and skeleton-none. All three are providers of the
skeleton virtual package, in lieu of the skeleton-common package,
which is now a simple dependency of all three new skeletons.
Those packages are empty for now. In followup changes:
- sysv-specific stuff will be moved out of skeleton-common and into
skeleton-sysv;
- systemd-specific stuff will be added to skeleton-systemd.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout:
- merge with the patch that enables the BR2_INIT_NONE case
- simplify the BR2_PACKAGE_SKELETON_COMMON_ONLY select logic]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- remove the BR2_PACKAGE_SKELETON_COMMON_ONLY logic, and instead
introduce a separate skeleton-none package for the BR2_INIT_NONE]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We now have two packages that can act as a skeleton, skeleton-common,
also known as our default skeleton, and skeleton-custom.
This means that the skeleton package can be a standard virtual package
now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move all the handling of the default skeleton into a new package,
skeleton-common.
We don't name it skeleton-default, because it will be further split
later, into a skeleton for sysv and another for systemd, with some parts
still common between the two. So just name it skeleton-common right now;
this will save us a rename later.
While we're at it, also assign to SKELETON_COMMON_TARGET_FINALIZE_HOOKS
instead of directly to the global FINALIZE_HOOKS. Therefore, we don't
need to do all of that in a condition BR2_PACKAGE_SKELETON_COMMON==y.
Note: it would be technically sound to move the skeleton files together
within a sub-directory of the skeleton-common package. However, we refer
the user to those files, from various locations (manual, packages). It
will indeed be easier for the user to find those files in
system/skeleton/ rather than in package/skeleton-common/skeleton/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: remove the mkdir $(STAGING_DIR)/usr/include which was removed
in skeleton.mk in master.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For the custom skeleton, we practicaly do nothing, except ensure it
contains the basic, required directories, and that those are properly
setup wrt. merged /usr.
Furthermore, our current skeleton is not fit for systemd, and we'll
have to split things out into various skeletons.
So, off-load the custom skeleton into its own package.
Thus, the existing skeleton package is now limited to:
- when using our default skeleton, install and tweak it properly;
- when using a custom skeleton, do nothing except for depending on
the skeleton-custom package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: split off in a separate patch doing only this]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Our current skeleton is tailored to sysv-like init systems; it is not
fit for systemd-based systems. So, in upcoming changes, we'll add
another skeleton for systemd.
This means we can no longer have the current skeleton default to 'y', or
it would be enabled also for systemd, which would be incorrect.
So, we remove the default to 'y' but have it selected by the default
skeleton choice.
However, we do not yet have a way to directly build (really, install)
the custom skeleton, it is built (really, installed) as a dependency of
the default skeleton. So we must also forcibly select the default
skeleton when using a custom one.
Until we have the means to do only one or the other; i.e. when we have a
virtual skeleton.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Setting the root pasword is done in a target-finalize hook, so we do not
need to enforce a dependency from the skeleton onto host-mkpasswd.
Dropping that dependency will simplify making skeleton a virtual
package (in up-coming changes).
Instead, it is now selected as any other package. As such, it is
guaranteed to be built before target-finalize.
This however introduces a slight change in behaviour: previously,
host-mkpasswd would only be built if we needed to hash the root password
from its plain-text value. Now, host-mkpasswd is always built as soon as
the root password is non-empty, even if already pre-hashed.
Since host-mkpasswd is a really tiny weeny package bundled in Buildroot,
with only two C files, built as a single unit with a single gcc call,
the overhead is really minimal. Compared to the simplifications this
will allow in the skeleton packages (plural: common, sysv, systemd,
custom) to come, this overhead is acceptable.
Yet another simplification, even if small, to ease providing multiple
skeletons.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, remounting / read-write (or not) is done by the skeleton
package when the init system is either busybox or sysvinit, by
registering a target-finalize hook; it is not done at all for systemd.
Move registering this target-finalize hook to both of busybox and
sysvinit. Leave systemd alone, we'll take care of it later.
Rename the macro to a more meaningful name, and move it to system.mk
with the other such macros.
Yet a little bit less init-system knowledge in the skeleton.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: remove not-so-useful comments, as pointed by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, setting the getty is done:
- by the skeleton package when the init system is either busybox or
sysvinit;
- by the systemd package when the init system is systemd;
both by registering a target-finalize hook.
This is not very consistent.
Move setting the getty out of the skeleton and into the package that
provides the init system, by registering a per-package target-fialize
hook.
This offloads yet a bit more out of the skeleton, so that it is easier
to properly separate the skeletons for the various init systems.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some macros, soon some variables, currently defined in the skeleton are
going to be used by other packages.
Some of those variables will be used as Makefile conditions (e.g. in
ifeq() conditions), so they *must* be defined before being used.
Since the skeleton package, starting with an 's', is included quite
late, those variables would not be available to most packages.
Offload the existing macros into the new system/system.mk file, that is
included early, before any package is. Rename the macros to appropriate
names.
Future commits will add new macros and variables in that file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ifupdown scripts can be used independently of the init system, be it
sysv, busybox or systemd; they could even be used when there is no init
system (i.e. the user is providing his own).
Currently, those ifupdown scripts are bundled in the skeleton.
But we soon will have a skeleton specific to systemd, so we would be
missing those scripts (when systemd-networkd is not enabled).
So, move those scripts to their own package.
To keep the current behaviour (before it is changed in future commits),
we make that package default to y, but depend on the default skeleton.
Instead of being a target-finalize hook, the scripts are installed as
any other package are, with a package install-target command.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: drop empty IFUPDOWN_SCRIPTS_SOURCE]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Until now, the option BR2_ENABLE_LOCALE was more-or-less controlling
whether NLS support was enabled in packages. More precisely, if
BR2_ENABLE_LOCALE=y, we were not doing anything (so some packages
could have NLS support enabled, some not). And only when
BR2_ENABLE_LOCALE was disabled we were explicitly passing
--disable-nls to packages.
This doesn't make much sense, and there is no reason to tie NLS
support to locale support. You may want locale support, but not
necessarily NLS support. Therefore, this commit introduces
BR2_SYSTEM_ENABLE_NLS, which allows to enable/disable NLS support
globally. When this option is enabled, we pass --enable-nls to
packages, otherwise we pass --disable-nls.
In addition, when this option is enabled and the C library doesn't
provide a full-blown implementation of gettext, we select the gettext
package, which will provide the full blown implementation.
It is worth mentioning that this commit has a visible impact for users:
- Prior to this commit, as soon as BR2_ENABLE_LOCALE=y, packages
*could* provide NLS support. It was up to each package to decide
whether they wanted to provide NLS support or not (we were not
passing --enable-nls nor --disable-nls).
- After this commit, it's BR2_SYSTEM_ENABLE_NLS that controls whether
NLS is enabled or disabled, and this option is disabled by default.
Bottom line: with the default of BR2_SYSTEM_ENABLE_NLS disabled, some
packages may lose NLS support that they used to provide. But we
believe it's a reasonable default behavior for Buildroot, where
generally NLS support is not necessary.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even though no timezone implicitly means UTC, systemd is not all that
happy when it does not have a timezone set. This is all fine on a RW
filesystem because systemd will create a symlink on its own (to
Etc/UTC), but not so much on a RO filesystem, causing all kind of
issues at boot time (up to the point that the system is unusable).
We fix that by requiring that the timezone is actually set. The check is
done by verifying that the timezone file is an actual file; if not set,
the test would find a directory and would thus fail.
Update the help entry accordingly.
Also fix indentation in tzdata.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Richard Braun <rbraun@sceen.net>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Martin Bark <martin@barkynet.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_SYSTEM_BIN_SH hidden option defines to what binary the /bin/sh
symlinks should point to. If busybox is chosen, then /bin/sh is created
to point to /bin/busybox.
This works fine with the default installation mode of Busybox, but it
fails with the upcoming "individual binaries" mode, in which each applet
is installed as its own binary, and /bin/busybox doesn't exist: we get
/bin/sh as a broken symlink to /bin/busybox.
Since Busybox already installs its own /bin/sh symlink, properly
pointing to /bin/ash or /bin/hush depending on the selected shell, it
doesn't make sense for the BR2_SYSTEM_BIN_SH logic to override
this. Just let Busybox install its own /bin/sh by making
BR2_SYSTEM_BIN_SH empty when Busybox shell is selected as /bin/sh.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Without this patch, it is not possible to allocate PTYs when a generated
rootfs image with a recent glibc and systemd is launched as a container on
an RHEL7 system via machinectl/systemd-nspawn. The container boots, but
`machinectl login mycontainer` fails. The culprit is /dev/pts/ptmx with
0000 perms.
On a typical system, there are two `ptmx` devices. One is provided by the
devpts at /dev/pts/ptmx and it is typically not directly accessed from
userspace. The other one which actually *is* opened by processes is
/dev/ptmx. Kernel's documentation says these days that /dev/ptmx should be
either a symlink, or a bind mount of the /dev/pts/ptmx from devpts.
When a container is launched via machinectl/machined/systemd-nspawn, the
container manager prepares a root filesystem so that the container can live
in an appropriate namespace (this is similar to what initramfs is doing on
x86 desktops). During these preparations, systemd-nspawn mounts a devpts
instance using a correct ptmxmode=0666 within the container-to-be's
/dev/pts, and it adds a compatibility symlink at /dev/ptmx. However, once
systemd takes over as an init in the container,
/lib/systemd/systemd-remount-fs applies mount options from /etc/fstab to
all fileystems. Because the buildroot's template used to not include the
ptmxmode=... option, a default value of 0000 was taking an effect which in
turn led to not being able to allocate any pseudo-terminals.
The relevant kernel option was introduced upstream in commit 1f8f1e29 back
in 2009. The oldest linux-headers referenced from buildroot's config is
3.0, and that version definitely has that commit. Mount options that are
not understood by the system are anyway ignored, so backward
compatibility is preserved.
Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: fix commit title, adjust commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Allow automatic network configuration via systemd-networkd if selected.
If systemd-networkd is enabled and $BR2_SYSTEM_DHCP is set, then create
a .network file to configure the selected network interface via DHCP.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[Thomas:
- merge the two patches from Eric into just one
- instead of generating the dhcp.network file completely from the .mk
file, use a template file, and "sed" it with the right network
interface]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 006a328ad6 ("util-linux: fix build with ncurses") removed
dependency on BR2_USE_WCHAR, but failed to update the reverse
dependencies of util-linux.
This commit updates comments in Config.in for BR2_USE_WCHAR for reverse
dependencies of util-linux which directly uses wchar now or when it is
pulled from other dependencies.
eudev doesn't use wchar directly, but needs C99 compiler. Autotools
generate code with wchar_t for checking C99 compiler.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Don't force remounting / read/write when using a customskeleton and
systemd as init system, to fix the following unmet dependencies:
warning: (BR2_INIT_SYSTEMD) selects BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW
which has unmet direct dependencies (BR2_ROOTFS_SKELETON_DEFAULT)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As recently discussed on lwn.net: https://lwn.net/Articles/695478/
The kernel has special behaviour for uid/gid 65534:
1. The kernel maps UIDs > 65535 to it when some subsystem/API/fs
only supports 16bit UIDs, but a 32bit UID is passed to it.
2. it's used by the kernel's user namespacing as the internal UID
that external UIDs are mapped to that don't have any local mapping.
3. It's used by NFS for all user IDs that cannot be mapped locally if
UID mapping is enabled.
Most distributions already map (or are in the progress of changing)
nobody/nogroup to the 65534 uid/gid, so lets do so as well.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It uses spawn() and thus fork(), so it needs an MMU.
Fixes a build issue reported on IRC for a cortex-m4 build:
http://pastebin.com/dGCsy0sr
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we limit installing zoneinfo to non-musl toolchain, by lack
of knowledge on how it would work on musl.
Turns out that musl uses the same zoneinfo format as glibc does.
Make it possible to install the TZ info whatever the C library; for
musl, use tzdata as for glibc.
Thanks Rich! ;-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Rich Felker <dalias@aerifal.cx>
Cc: Marc Khouri <marc@khouri.ca>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The options to purge locales and to generate locale data are currently
located in the toolchain menu. However, these options are not really
related to the toolchain per-se, they are more system-level
configuration options, much like the timezone selection option we
already have in the "System configuration" menu.
Therefore, it makes more sense to have the locale-related options in
the "System configuration" menu as well.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With this config you can bootup a Linux kernel
in GDB simulator and test Blackfin kernel and
userland.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We expect the custom skeleton to be fully filled with the necessary
files, now. There is definitely no reason we should handle setting the
hostname and the issue file in there. A user using a custom skeleton
should be fully responsible for providing a functional skeleton.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We expect the custom skeleton to be fully filled with the necessary
files, now. There is definitely no reason we should handle network
settings in there. A user using a custom skeleton should be fully
responsible for providing a functional skeleton.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the following commits, we'll be switching more options to be
conditional on the default or custom skeleton.
So, it makes sense that those options come after the choice of a
skeleton.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Being custom means that our default one is not suitable to start with.
So there is no reason to offer it as the default path.
Add a check that it is not empty.
Add a separating empty line, for good measure, too.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We now have a real file in that directory, so we do not need a .empty
placeholder.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Supporting a R/O rootfs needs a bit more love to be fully operational.
This will come in later patches...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, our /etc/mtab points to /proc/mounts. This was all neat so
far, and was good for a sysv-like init system.
However, the way today is to point it at /proc/self/mounts, the
per-process mount tab.
Additionnally, that's what systemd expects. If /etc/mtab is not a
symlink to ../proc/self/mounts and the rootfs is readonly, systemd would
whine loudly (and a service unit would be marked failed).
Since it works well for sysv-like init systems too, just use that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some users have the need to be able to tweak the content of the target
rootfs with root-like rights, that is, from inside the fakeroot script.
Add a new system option to allow those users to provide a list of
scripts, like the post-build and post-image scripts, that will be run
from our fakeroot script.
[Peter: pass TARGET_DIR to scripts, tweak help text]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Cam Hutchison <camh@xdna.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the support of capability to makedevs as extended attribute.
Now, it's possible to add a line "|xattr <capability>" after a
file description to also add a capability to this file. It's
possible to add severals capabilities with severals lines.
[Peter: extend doc, reword Config.in, extend error message,
use HOST_MAKEDEVS_CFLAGS/LDFLAGS for all flags]
Signed-off-by: Philippe Reynes <philippe.reynes@sagemcom.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following the removal of eglibc support, this commit replaces all
occurences of "(e)glibc" by just "glibc". Most of the occurences are in
package Config.in comments.
In addition, when the form "an (e)glibc ..." was used, it is replaced by
"a glibc ...".
[Peter: add new efi* packages, s/uclibc/uClibc as suggested by Romain,
systemd / liquid-dsp tweaks as suggested by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It can be a little bit misleading to have no init system...
Add a comment that states the user has to provide his own init system,
either via a package or a rootfs overlay.
It is expected that such a user will know what to provide, so we don't
really need to specify that it should be /init or /sbin/init or any
arbitrary executable pointed to by the kernel command line "init=..."
or anything else...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It was the only one with a trailing slash, it's only for coherence's
sake.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
/etc/profile only sources files that matches the /etc/profile.d/*.sh
pattern, so /etc/profile.d/umask was never sourced.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ldconfig handling in the main Makefile is utterly broken, as it
calls the build machine ldconfig to generate the ld.so.cache of the
target. Unfortunately, the format of the ld.so.cache is architecture
specific, and therefore the build machine ldconfig cannot be used
as-is.
This patch therefore simply drops using ldconfig entirely, and removes
/etc/ld.so.conf.d/ from the target skeleton. The idea is that all
libraries that should be loaded by the dynamic linker must be
installed in paths where the dynamic linker searches them by default
(typically /lib or /usr/lib).
This might potentially break a few packages, but the only way to know
is to actually stop handling ldconfig.
In order to be notified of such cases, we add a check in
target-finalize to verify that there is no /etc/ld.so.conf file as
well as no /etc/ld.so.conf.d directory.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
