When libsigsegv was compiled before, gawk will use it as optional
dependency:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/bin/gawk | grep NEEDED
0x0000000000000001 (NEEDED) Shared library: [libsigsegv.so.2]
[...]
The build system offers no option to en-/disable libsigsegv support:
http://git.savannah.gnu.org/cgit/gawk.git/tree/m4/libsigsegv.m4
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The gawk debugger can optionally use readline for user input during
the debugging session (for the usual autocompletion and stuff).
Enable readline support when the readline package is enabled; let
./configure automatically find it. Forcibly disable readline support
when the readline package is disabled.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When available, mpfr provides support for BIGNUM, which allows gawk to
work on arbitrarily-large numbers (hence the name).
Forcibly disable mpfr if the mpfr package is not enabled. Let
./configure find it automatically when it is enabled.
To be noted, the host-gawk need not have BIGNUM to build the target
variant with support for BIGNUM.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gawk has an optional dependency on mpfr (and thus gmp) and readline,
and will probe for them. If they are present, they are used; if they
are missing, that's not an error. mpfr (and gmp) is used for "BIGNUM"
support on gawk; readline is used by the gawk debugger.
However, mpfr (bringing gmp) are also host-packages in Buildroot, but in
the standard build order (i.e. a plain 'make'), they are built after
gawk. Ditto readline (from ncurses).
If the user has the development files for gmp and mpfr, then gawk is
linked to them. Ditto readline.
Now, further on in the build, we build gmp and mpfr (for gcci or guile),
so we install them in the host dir. Ditto readline (for gdb, ncurses
itself and a few other packages...)
But because we forcibly set an RPATH tag on all our host binaries, our
host gawk will now dynamically link with our versions, when it was in
fact built against the host ones.
This did not seem to cause any harm so far, but is far from ideal.
Since we do not really need BIGNUM or the debugger in our host gawk, we
just forcibly disable them and configure gawk without readline or mpfr
(there's no switch for gmp, but it's not a direct dependency, it comes
just with mpfr).
[Adjust comment as suggested by Thomas/Yann]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop LIBTOOL/GETTEXTIZE as well since it's no longer bundled with a beta
version.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Autogenerated from rename-patch.py (http://patchwork.ozlabs.org/patch/403345)
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since a while, the semantic of BR2_PREFER_STATIC_LIB has been changed
from "prefer static libraries when possible" to "use only static
libraries". The former semantic didn't make much sense, since the user
had absolutely no control/idea of which package would use static
libraries, and which packages would not. Therefore, for quite some
time, we have been starting to enforce that BR2_PREFER_STATIC_LIB
should really build everything with static libraries.
As a consequence, this patch renames BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS, and adjust the Config.in option accordingly.
This also helps preparing the addition of other options to select
shared, shared+static or just static.
Note that we have verified that this commit can be reproduced by
simply doing a global rename of BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS plus adding BR2_PREFER_STATIC_LIB to Config.in.legacy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
When a package A depends on config option B and toolchain option C, then
the comment that is given when C is not fulfilled should also depend on B.
For example:
config BR2_PACKAGE_A
depends on BR2_B
depends on BR2_LARGEFILE
depends on BR2_WCHAR
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
This comment should actually be:
comment "A needs a toolchain w/ largefile, wchar"
depends on BR2_B
depends on !BR2_LARGEFILE || !BR2_WCHAR
or if possible (typically when B is a package config option declared in that
same Config.in file):
if BR2_B
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
[other config options depending on B]
endif
Otherwise, the comment would be visible even though the other dependencies
are not met.
This patch adds such missing dependencies, and changes existing such
dependencies from
depends on BR2_BASE_DEP && !BR2_TOOLCHAIN_USES_GLIBC
to
depends on BR2_BASE_DEP
depends on !BR2_TOOLCHAIN_USES_GLIBC
so that (positive) base dependencies are separate from the (negative)
toolchain dependencies. This strategy makes it easier to write such comments
(because one can simply copy the base dependency from the actual package
config option), but also avoids complex and long boolean expressions.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(untested)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch lines up the comments in Config.in files that clarify which
toolchain options the package depends on.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: leave change xz tarball format to not end up with circular deps]
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump gawk to version 4.0.0
Also build after busybox if it's enabled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thanks to the pkgparentdir and pkgname functions, we can rewrite the
AUTOTARGETS macro in a way that avoids the need for each package to
repeat its name and the directory in which it is present.
[Peter: pkgdir->pkgparentdir]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For some unknown reason, gawk.mk was overriding CC to $(TARGET_CC) at
build time, while it had already been set at configure time to
"$(TARGET_CC) $(TARGET_CFLAGS)" which is already the good value.
Setting it to just $(TARGET_CC) breaks the compilation with external
toolchains because we must pass the --sysroot option. But anyway, this
was incorrect as we were loosing some CFLAGS set by Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The cleanup of $(TARGET_DIR)/usr/share/man, $(TARGET_DIR)/usr/man,
$(TARGET_DIR)/usr/share/info, $(TARGET_DIR)/usr/info,
$(TARGET_DIR)/usr/share/doc and $(TARGET_DIR)/usr/doc is already done
globally in the main Makefile. Therefore, there's no need to handle
that on a per-package basis.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We have been passing -q to ./configure when using 'make -s' for
packages using Makefile.autotools.in for some time. Do the same
for packages using autotools, but not using the
Makefile.autotools.in infrastructure, taking care to not do it
for packages with hand written configure scripts.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A C library will have been built by the toolchain makefiles, so there is no
need for packages to explicitly depend on uclibc.
Signed-off-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
they should be configured with --prefix=/usr and we then need to use
make DESTDIR=$(STAGING_DIR) install to get things installed into the
staging directory. The current situation for many packages, which use
--prefix=$(STAGING_DIR) results in the staging_dir paths getting compiled
into the binary itself.
This also adds in a pile of libtool fixups. Between broken pkgconfig,
broken libtool handling, and broken --prefix settings, its a wonder
things have worked as well as they have up till now.
-Erik
