Because cmake was the only build-system supporting this feature, it has been
disabled for the target packages.
For consistency, this patch does the same for host package too.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch globally disables doc, examples and tests build for both the
target and host packages.
If needed, these configure flags can be overloaded in the per-package
*_CONF_OPTS variables.
This makes the cmake-package infrastructure even closer to the autotools
one.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch renames, consistently with the other package
infrastructures, the _INSTALL_OPTS variable for host CMake-based
package.
As mentioned in [1], no host-cmake-package uses this variable so far;
so it is a safe rename.
[1] http://lists.busybox.net/pipermail/buildroot/2014-October/107712.html
Reported-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_INSTALL_HOST_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_INSTALL_HOST_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_INSTALL_STAGING_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_INSTALL_STAGING_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_INSTALL_TARGET_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_INSTALL_TARGET_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While the autotools infrastructure was using FOO_MAKE_OPT, generic packages
were typically using FOO_MAKE_OPTS. This inconsistency becomes a problem
when a new infrastructure is introduced that wants to make use of
FOO_MAKE_OPT(S), and can live alongside either generic-package or
autotools-package. The new infrastructure will have to choose between either
OPT or OPTS, and thus rule out transparent usage by respectively generic
packages or generic packages. An example of such an infrastructure is
kconfig-package, which provides kconfig-related make targets.
The OPTS variant is more logical, as there are typically multiple options.
This patch renames all occurrences of FOO_MAKE_OPT in FOO_MAKE_OPTS.
Sed command used:
find * -type f | xargs sed -i 's#_MAKE_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The linker flags are part of the toolchain configuration, so set them for
the CMake-based packages.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The USE_CCACHE CMake flag is only useful when building target package
(only the toolchainfile.cmake uses it).
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In English, unlike in French, almost all usages of the word 'information'
are uncountable, meaning that 'informations' is invalid.
This patch fixes this typo throughout the tree, except in CHANGES and
docs/news.html (historic text).
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In English, unlike in French, the 'h' in 'host' is pronounced, meaning that
the article should be 'a' instead of 'an'.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The inner-xxx-targets in the buildroot package infrastructures are
evaluated using $(eval) which causes variable references to be a bit
different than in regular make code. As we want most references to be
expanded only at the time of the $(eval) we should not use standard
references $(VAR) but rather use double dollar signs $$(VAR). This includes
function references like $(call), $(subst), etc. The only exception is the
reference to pkgdir/pkgname and numbered variables, which are parameters to
the inner block: $(1), $(2), etc.
This patch introduces consistent usage of double-dollar signs throughout the
different inner-xxx-targets blocks.
In some cases, this would potentially cause circular references, in
particular when the value of HOST_FOO_VAR would be obtained from the
corresponding FOO_VAR if HOST_FOO_VAR is not defined. In these cases, a test
is added to check for a host package (the only case where such constructions
are relevant; these are not circular).
Benefits of these changes are:
- behavior of variables is now again as expected. For example, setting
$(2)_VERSION = virtual in pkg-virtual.mk will effectively work, while
originally it would cause very odd results.
- The output of 'make printvars' is now much more useful. This target shows
the value of all variables, and the expression that led to that value.
However, if the expression was coming from an inner-xxx-targets block, and
was using single dollar signs, it would show in printvars as
VAR = value (value)
while if double dollar signs are used, it would effectively look like
VAR = value (actual expression)
as is intended.
This improvement is for example effective for FOO_DL_VERSION, FOO_RAWNAME,
FOO_SITE_METHOD and FOO_MAKE.
The correctness of this patch has been verified using 'make printvars',
'make manual' and 'make legal-info' before and after applying this patch,
and comparing the output.
Insight-provided-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This CMake flag is usually used to adjust compiler flags (like: -Ox, -g,
etc).
So, it makes sense for Buildroot to globally drive this CMake flags in
the cmake-package infrastructure.
However, if a package prefer overriding this default setting, it still
can via the <PKG>_CONF_OPT variable.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This CMake flag is used to enable tests. It may not disable the test
programs from being built, but it controls the test execution.
Since we don't care about building the tests (and usually disable them
when possible), make sure Buildroot won't try to run them.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch updates the generated toolchainfile.cmake to use ccache.
When toolchainfile.cmake is used inside Buildroot, using ccache during
the build is driven by a CMake knob: USE_CCACHE, automatically set by
the cmake-package infrastructure and reflecting the BR2_CCACHE value.
Since this toolchainefile.cmake file can be used outside Buildroot, and
this file also set a couple of things (among these: the sysroot cflag,
some pkg-config environment variables), it is important to set the
compiler variables as well to keep the consistency of the
cross-compilation configuration.
So, when it is used outside Buildroot, using ccache for the build is
driven by the ccache program availability.
Note that using ccache for the build is achieved by setting the *_ARG1
CMake variables to let CMake use ccache without failing in detecting
the compiler.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch allows sharing or moving the toolchains.
This is a step toward making the toolchain/sdk relocatable.
Closes#6818
[Peter: reword comment as suggested by Thomas]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Uwe Strempel <u.strempel@googlemail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch introduces a toolchainfile.cmake.in template which is filled
by Buildroot.
Using a toolchainfile.cmake.in template file allows to avoid overloading
quoting and/or escaping and it becomes much more similar to the
resulting file.
This patch also cleans up the quoting style.
[Peter: drop stdin redirect as suggested by Thomas]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
printf is POSIX-compliant, echo -e is not.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Because BR_PATH is not exported in the environment beforehand running
cmake, it is necessary to add it on the cmake configure command.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit makes the dependency from the target toolchain explicit.
This way we can buid from command line a package that use
inner-generic-package right after the configuration phase, example:
make clean <package-name>
Also remove TARGETS_ALL because the only purpose was to add toolchain
dependency so it's superseded by this commit.
To prevent circular dependency add the new variable
<pkgname>_ADD_TOOLCHAIN_DEPENDENCY to avoid adding the toolchain
dependency for toolchain packages.
This is also a step forward supporting top-level parallel make.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The fourth parameter to inner-generic-package is no longer used. Removing
this parameters requires renaming all usages of $(5) to $(4), and updating
the calls to inner-generic-package (and equivalent for the other package
infrastructures).
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When calling make 'functions', the $(call) keyword is only needed if the
function takes arguments. For pkgdir, pkgname and pkgparentdir this is not
the case, so we can remove the call to make things more readable.
Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cmake is the only build-system we support that does colour its output,
Also, since parallel builds generates intermixed output lines, it makes
for ugly-looking output.
Just disable cmake colouring globally.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CMake offers a couple of places where one can specify how to build a
library:
- when you create the library target itself, by calling
add_library(target [SHARED|STATIC] ...)
- or globally, when you configure the build, by setting the
BUILD_SHARED_LIBS CMake flag.
* if the library target kind of library is specified:
it overrides the global setting BUILD_SHARED_LIBS;
* else, if the global setting BUILD_SHARED_LIBS is set:
it builds according to the BUILD_SHARED_LIBS flags;
* otherwise:
for linux, it will build static library (like BUILD_SHARED_LIBS
default is OFF).
So, we can consider the setting BUILD_SHARED_LIBS acts a bit similarly
to the autotools ones '--disable-static' and '--enable-shared'.
Thus, it makes sense for Buildroot to globally drive to CMake flags in
the cmake-package infrastructure.
It seems we never trigger this so far because:
- either we specified it in the *.mk file (e.g. opencv.mk);
- or it was already set per target by the projects' upstreams.
Followup patches will clean the remaining BUILD_SHARED_LIBS in the
package *.mk files.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
