This patch bumps the zynq_microzed_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30
- U-Boot v2023.01 with additional bug fixes
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynq_zed_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30
- U-Boot v2023.01 with additional bug fixes
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynq_zc706_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30
- U-Boot v2023.01 with additional bug fixes
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add defconfig for the Khadas VIM3 board which uses a A311D SoC with a 4x
ARM Cortex-A73 + 2x ARM Cortex-A53 big.LITTLE architecture.
This defconfig includes the Linux mainline kernel version 6.3 as well as
mainline uboot version 2023.04 with an in-tree .dts and uboot-defconfig.
It also includes the host-tool amlogic-boot-fip which is necessary for
signing the bootloader. This host tool is used in the post-image.sh script
in order to generate the signed binary.
This binary is then flashed to the final sdcard.img after it is
generated using genimage. It is done in this way because the bootloader
image needs to be flashed in 2 steps. First the first 444 bytes need to
be flashed to the beginning of the sdcard.img, then we need to skip 68 bytes
in the source and the destination and then write the remaining
bootloader image to the sdcard.img.
Ref: http://docs.khadas.com/products/sbc/vim3/development/create-bootable-tf-card
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
[Romain:
add BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_3=y
add BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
add BR2_PACKAGE_HOST_DOSFSTOOLS=y for genimage vfat support
]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Update the linux-imx kernel to be aligned with the NXP BSP
LF6.1.22_2.0.0 (same release used in meta-freescale [1]).
Add BR2_TARGET_UBOOT_NEEDS_GNUTLS=y and BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y
since they are new dependencies for building mkeficapsule u-boot tool.
The uboot-imx doesn't use the default imx8mp-evk devicetree anymore due
to commit [2]:
"Change to use imx8mp-evk-revb4.dtb and imx8mp-ddr4-evk-revb4.dtb
as default kernel DTB for iMX8MP re-design EVK board. Old EVK
board is EOL, to boot old EVK, user can switch to old DTB manually."
Since the freescale_imx8mpevk_defconfig only install imx8mp-evk.dtb in
the final image, the boot stop with:
Booting from mmc ...
Failed to load 'imx8mp-evk-revb4.dtb'
WARN: Cannot load the DT
Add a u-boot defconfig fragment to revert this change [2] and use the
imx8mp-evk.dtb by default.
Runtime tested on i.MX 8M Plus EVK REV B2.
[1] e6b1b6725c
[2] a60e787a6e
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for Orangepi Zero3 board:
- U-Boot 2021.07 fork by Orangepi
- Linux 6.1.31 fork by Orangepi
- Default packages from buildroot
Enable CONFIG_MFD_AC200 as it is used directly by other module,
resulting in build failure when disabled.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Tested-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for Bananapi M2 Berry board based on the Allwinner V40/A40i
SoC.
- U-Boot 2023.07
- Linux 6.1.38
Board specifications: https://wiki.banana-pi.org/Banana_Pi_BPI-M2_Berry
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Enable OpenSSL to build U-boot. Reported by the daily autobuild.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/5083367140
Signed-off-by: Roberto Medina <robertoxmed@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Backport an upstream patch fixing the build with binutils >= 2.38
for riscv's for Zicsr and Zifencei.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4987456149
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for PineCube with:
- U-Boot 2022.04
- Linux 5.15.61
PineCube is a low-powered, open source IP camera
with the following specs:
- Allwinner S3 Cortex-A7
- 128 MiB DDR3
- 16 MiB SPI flash
- 5 MPx OV5640 camera
- MicroSD slot
- 10/100M Ethernet with passive PoE
- 802.11 b/g/n WiFi
- Bluetooth 4.1
- USB 2.0
- 26 pins GPIO header
- Microphone
- IR LEDs for night vision
Board homepage: https://www.pine64.org/cube/
Board wiki: https://wiki.pine64.org/wiki/PineCube
Signed-off-by: Jan Havran <havran.jan@email.cz>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While switching ATF to github, the BR2_TARGET_UBOOT_CUSTOM_GIT=y
symbol was not removed. Since then this defconfig fail to build
in gitlab-ci due to invalid defconfig check.
WARN: defconfig ./configs/freescale_imx6qsabresd_defconfig can't be used:
Missing: BR2_TARGET_UBOOT_CUSTOM_GIT=y
[1] dd42b159a5
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4889436612
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
uboot needs Python libfdt to build:
pylibfdt does not seem to be available with python3
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4839060137
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump qemu_arm_ebbr_defconfig and qemu_aarch64_ebbr_defconfig in sync:
- Bump Linux to v6.4.3
- Bump U-Boot to 2023.07.02
- Bump TF-A to v2.9
While at it, tune the documentation:
- Increase the amount of memory in the example commands to help run the
largest OS distributions.
- Update the link to the IR Guide to point at the latest version.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is needed to auto-load some kernel modules needed for the HW to
work.
Signed-off-by: Javad Rahimi <javad321javad@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As of upstream commit cbd91e89e4
we can use the default BR2_riscv_g to select IMAFD extensions and
still be able to enable additional extensions, such as the C extension
in our cse.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
All defconfigs were runtime tested in Qemu 8.0.3.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Let's select the RVA option as Andes 45-series CPUs support IMAFDC
extensions.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adds support for TI's SK-AM62 board by introducing the
am62x_sk_defconfig file and related support files.
More information about the board can be found at:
https://www.ti.com/tool/SK-AM62
Signed-off-by: Xuanhao Shi <x-shi@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adds support for TI's SK-AM64 board by introducing the
ti_am64x_sk_defconfig file and related support files.
More information about the board can be found at:
https://www.ti.com/tool/SK-AM64
Signed-off-by: Xuanhao Shi <x-shi@ti.com>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Acked-by: Andrew Davis <afd@ti.com>
Tested-by: Bryan Brattlof <bb@ti.com>
Cc: Romain Naour <romain.naour@gmail.com>
Reviewed-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the RISCV_ISA_RVC config option to match updated RISCV kconfig
instruction set options.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This new binutils version break the ATF build due to new linker warnings:
ld.bfd: warning: bl2.elf has a LOAD segment with RWX permissions
From [1]
"Users of GNU ld (BPF) from binutils 2.39+ will observe multiple instaces
of a new warning when linking the bl*.elf in the form:
ld.bfd: warning: stm32mp1_helper.o: missing .note.GNU-stack section implies executable stack
ld.bfd: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
ld.bfd: warning: bl2.elf has a LOAD segment with RWX permissions
ld.bfd: warning: bl32.elf has a LOAD segment with RWX permissions
These new warnings are enbaled by default to secure elf binaries:
- https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ba951afb99912da01a6e8434126b8fac7aa75107
- https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=0d38576a34ec64a1b4500c9277a8e9d0f07e6774
"
Bump the ATF custom version to 2.9 for binutils 2.39+ support.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4889436283
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump the kernel to the latest release of 5.4 kernel series
to fix an issue with gcc 12.
arch/mips/jz4740/setup.c: In function 'plat_mem_setup':
arch/mips/jz4740/setup.c:64:25: error: comparison between two arrays [-Werror=array-compare]
64 | if (__dtb_start != __dtb_end)
| ^~
arch/mips/jz4740/setup.c:64:25: note: use '&__dtb_start[0] != &__dtb_end[0]' to compare the addresses
CC fs/debugfs/file.o
cc1: all warnings being treated as errors
Fixed in v5.4.195:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=a60def7568216684f62b117c199429c4a9a89570
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4889436573
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
objtool built by the kernel requires libelf
ldd output/build/linux-6.1.24/tools/objtool/objtool
linux-vdso.so.1
libelf.so.1 => output/host/lib/libelf.so.1
While updating the kernel [1] we forgot to select
BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF to provide Buildroot's host-libelf.
Using host-libelf avoid linking with libelf installed on the host or
failing to build objtool if libelf is not installed.
[1] d45538f2e7
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4889436869https://gitlab.com/buildroot.org/buildroot/-/jobs/4889436872
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch introduces patches for the custom kernel, as it is
currently used for the Radxa Rock 5B. The patches fix two gcc
compiler warnings, which result in a build error, if the kernel
is used with gcc version 12.
Since also the code of custom board drivers for WiFi support is
affected, and no fixes are provided by the vendor, the custom WiFi
support is disabled.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update the instruction sets for MPFS icicle kit to mirror the
configuration update, i.e. It is now classed as a RISC-V G core with
support for C, IMAFDC.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The generic extension set 'G' is realy a base with the minimal set of
extensions needed to be comfortable (but not required) to run a
linux-bassed system. Similarly, we consider the custom to be about the
custom set of features (not about a custom core implementing such a
set).
As such, we allow that a core with the G set can have futher extensions
without requiring it to be configured as a custom set.
We drop the intermediate symbols with the prompts, and move the prompts
to the previously hidden symbols, and add a prompt for the I set.
This alows one to clearly see what the generic set is about, without
having to delve into the help and hunt the list of selected symbol.
Note however that the G set implies Zicsr and Zifencei, but we have no
prompt for thos two, because in Buildroot, we assume that they are
mandatory and always present, like the I set (which they previously were
part of).
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
[yann.morin.1998@free.fr:
- drop the intermediate symbols
- move prompt to previously hidden symbols
- add symbol for I
- update defconfigs
- reword the commit log accordingly
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Don't specify the ARCH_FLAGS of U-Boot, so both extensions can be
appended to -march when building w/ gcc-12.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/4839059655
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The issue seems to be fixed. I checked qemu and linux git repositories
but can not find any information when this is starting to work.
System gets successfully an IP, no further testing was done.
Tested with Qemu 8.0.3 and Linux 6.1.x.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a new defconfig for OrangePI PC2 board.
It was supported before in Buildroot, however due to problems in
building TF-A, it was removed in commit
eeede611f8. This commit re-adds it, in a
state that properly builds.
Signed-off-by: Javad Rahimi <javad321javad@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add defconfig for imxrt1050-evk is a development board from NXP.
The i.MXRTxxxx family spreads from i.MXRT1020 to i.MXRT1170 with the
first one supporting 1 USB OTG & 100M ethernet with a cortex-M7@500Mhz
up to the latter with i.MXRT1170 with cortex-M7@1Ghz and
cortex-M4@400Mhz, 2MB of internal SRAM, 2D GPU, 2x 1Gb and 1x 100Mb
ENET. The i.MXRT family is NXP's answer to STM32F7xx, as it uses only
simple SDRAM, it gives the chance of a 4 or less layer PCBs. Seeing
that these chips are comparable to the STM32F7xxs which have Buildroot
ported to them it seems reasonable to add support for them.
https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/i-mx-rt1050-evaluation-kit:MIMXRT1050-EVK
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for the icicle kit, the main development board for
Microchip's PolarFire SoC.
The configuration file is microchip_mpfs_icicle_defconfig. It builds a
bootable kernel image with an embedded root file system. The image
built can be flashed to the board using the eMMC or an SD card.
The yaml configuration file is used by the hss payload generator. It
maps the ELF binaries or binary blobs to the individual application
harts (U54s).
The image generator script sets the partitions of the image.
The kernel fragment file sets additional configurations for the icicle
kit in buildroot that are not in the default configuration.
The image tree souce file creates a FIT image.
The post image script creates the payload using the payload generator
host package and finally, creates the FIT image using the ITS after the
kernel build.
The U-Boot script and additional U-Boot configurations ensure that
U-Boot behaves as expected for the icicle kit and boots the FIT image.
The readme.txt file documents how to build and boot the icicle kit with
this configuration.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit duplicates the asus_tinker_rk3288_defconfig changing:
- BR2_LINUX_KERNEL_INTREE_DTS_NAME to rk3288-tinker-s
- BR2_TARGET_UBOOT_BOARD_DEFCONFIG to tinker-s-rk3288
- extlinux.conf devicetree to /boot/rk3288-tinker-s.dtb
- root device format to <major>:<minor> in order to prevent the kernel to mount rootfs
from the wrong device
- Add Flávio Tapajós for configs/asus_tinker-s_rk3288_defconfig and for
configs/asus_tinker-s_rk3288_defconfig and for board/asus/tinker-s
Signed-off-by: Flávio Tapajós <flavio.tapajos@newtesc.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps the versal_vck190_defconfig to xilinx-v2023.1 which includes
the following updates:
- Linux v6.1.5
- U-Boot v2023.01
- TF-A v2.8 (including mainline patches)
- PLM xilinx_v2023.1
- PSMFW xilinx_v2023.1
- versal-firmware uses new github.com/Xilinx/soc-prebuilt-firmware repo
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The m68k Linux kernel build is broken with binutils >= 2.41 with:
arch/m68k/fpsp040/skeleton.S: Assembler messages:
arch/m68k/fpsp040/skeleton.S:502: Error: junk at end of line, first unrecognized character is `#'
arch/m68k/fpsp040/skeleton.S:508: Error: junk at end of line, first unrecognized character is `#'
This commit adds a backport from the upstream Linux kernel which fixes
this issue. Many thanks to Romain Naour for the issue investigation
and the identification of the kernel commit fixing this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
