Running tests with top-level parallel builds can speed up running some
tests, expecially those that have a lot of packages like the systemd
init tests.
Trigger TLPB when the configuration enables per-package directories.
We're using the jlevel argument, which normally is used for BR2_JLEVEL
as the value for calling make -j<N> at the top-level. In fact,
BR2_JLEVEL is "unused" when using TLPB, because the top-level make
acts as the job server that distributes tokens to sub-makes (except
for the few build systems like waf or scons that don't support this),
so it's really the top-level make -j<N> that determines the level of
parallelism, and BR2_JLEVEL doesn't really have an effect.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Thomas: extend explanation a bit]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Start counting the line numbers in 1 instead of 0, in case an error
must be printed.
Both the error about a developer entry with no file entry and the error
about a file entry with no developer entry actually belong to the
non-empty line previous the one being analysed, so in these cases print
the line number from the line before.
Also count empty and comment lines, so a developer fixing the file can
jump to the correct line (or the nearest one).
At same time standardize the messages, printing the line number
also in the case of a warning for a file that is not in the tree
anymore.
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently 4 types of parsing errors/warnings can be found:
- entry for a file that is not in the tree anymore (warning)
- developer entry with no file entry (error)
- file entry with no developer (error)
- entry that is not a developer, a file or a comment (hard error)
Currently only the last one ends the script with -v with error code.
Make all 3 error types into hard errors and bail out at the first error
found, because the rest of the state machine is not designed to handle
malformed input.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a basic module that installs a single file, to check that it is
properly accounted for.
Reported-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thierry Bultel <thierry.bultel@linatsea.fr>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
http://autobuild.buildroot.net/results/5d1/5d10f4f545dccf126e3f5b5efce777a393c5e7bc/http://autobuild.buildroot.net/results/7c2/7c2df31c6eb34b68e460e092d8c262bdc6c8f25a/
The configure script of (host-)libopenssl needs the FindBin perl module on the host:
Can't locate FindBin.pm in @INC (you may need to install the FindBin module)
(@INC contains: /home/buildroot/autobuild/instance-2/output-1/host/lib/perl
/usr/local/lib64/perl5/5.36 /usr/local/share/perl5/5.36
/usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5
/usr/share/perl5) at ./Configure line 15. BEGIN failed--compilation aborted
at ./Configure line 15.
As this is needed for both libopenssl and host-libopenssl (which does not
have a corresponding config symbol in the .config), we have to require it
unconditionally.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit is the result of running
support/scripts/gen-bootlin-toolchains now that 2022.08 toolchains
have been made available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It will be needed by check-package to run checks according to the file
type (the same determined by the command 'file').
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Extend test_check_package to also check the ignore list functionality.
Check:
- the entries in the ignore list use relative path;
- an entry in the ignore list actually ignores the warning;
- an outdated entry in the ignore list generates a warning by its own,
preventing the ignoring list to grow indefinitely.
For this to work, add 3 test fixtures, listing entries for an
pre-existing file in the br2-external used in the test.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This script checks for inconsistencies on symbols declared in Config.in
and used in .mk files.
Currently it checks only symbols following the pattern BR2_\w+ .
The script first gets the list of all files in the repository (using git
ls-files like 'make check-flake8' already do).
Then it parses all relevant files, searching for symbol definitions and
usages, and add entries into a database.
At the end, the database is searched for inconsistencies:
- symbol that is part of "choice" and is referenced with "select";
- legacy symbol being referenced in packages;
- legacy symbol being redefined in packages;
- symbol referenced but not defined;
- symbol defined but not referenced;
- legacy symbol that has a Note stating it is referenced by a package
(for legacy handling) but is referenced in the package without a
comment "# legacy";
- legacy symbol that has a Note stating it is referenced by a package
but it is not actually referenced.
There is also a debug parameter --search that dumps any filename or
symbol entries from the database that matches a regexp.
Sample usages:
$ utils/check-symbols
$ utils/docker-run utils/check-symbols
$ utils/check-symbols --search 'GETTEXT\b|\/openssl'
At same time the script is created:
- add unit tests for it, they can be run using:
utils/docker-run python3 -m pytest -v utils/checksymbolslib/
- add two more GitLab CI jobs: check-symbols (to check current tree
using the script) and check-check-symbols (to check the script against
its unit tests)
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Peter: print warnings to stderr, rename change_current_dir() to
change_to_top_dir()]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following the example of test-pkg config described in commit
"12c7a05da1 utils/test-pkg: add gitlab-ci support" to test a defconfig
fragment that contains a disabled option is currently possible, but
it do requires one to change the git config core.commentChart so the
lines starting with "#" are not discarded by git when creating/editing
the commit message.
For instance, without the indentation the 3rd line below would be
excluded from the commit message when the editor is closed:
test-pkg config:
SOME_OPTION=y
# OTHER_OPTION is not set
SOME_VARIABLE="some value"
Requiring to change git configs is not very nice.
So make the developer's life easier by changing the sed expression to
remove indentation with spaces from a defconfig fragment found on a
commit message.
For instance these lines become valid and generate a defconfig fragment
without the indentation of one space to be tested in GitLab CI:
test-pkg config:
SOME_OPTION=y
# OTHER_OPTION is not set
SOME_VARIABLE="some value"
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When we introduced support for the paranoid check of unsafe libraries
and headers path with commit 4ac8f78d37 (Add option for paranoid
unsafe path checking) back in 2014, we made it optional, as we expected
that would break quite a few packages.
Now, almost 8 years later, we only have three packages that explicitly
reference the option (dillo, gnuradio, and libtalloc), either in a patch
or in their .mk.
The option has been enabled by default since 2016, with 61c8854cef
(toolchain: enable paranoid unsafe path check by default), and that has
not triggered many build failures in a while.
The minimal defconfig used by test-pkg has also had it enabled as of
b6c98b3549 (minimal.config: add BR2_COMPILER_PARANOID_UNSAFE_PATH=y)
in 2017.
It is time to make that globally unconditional now.
There is still a remnant, in our binutils patches. As our toolchain may
get used outside of Buildroot, people may got the expectation that path
poisoning is only a warning, so we keep the current behaviour.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Romain Naour <romain.naour@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Open Fabrics Performance Tests.
This is a collection of tests written over uverbs intended
for use as a performance micro-benchmark. The tests may be
used for HW or SW tuning as well as for functional testing.
https://github.com/linux-rdma/perftest
Tested-by: Shamraiz Ashraf <shamraizashraf092@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
[yann.morin.1998@free.fr
- move all arch-related dependencies to _ARCH_SUPPORTS
- include musl condition in comment and its dependnecies
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is the userspace components for the Linux Kernel's
drivers/infiniband subsystem.
https://github.com/linux-rdma/rdma-core
Tested-by: Shamraiz Ashraf <shamraizashraf092@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
[yann.morin.1998@free.fr:
- select iproute2 as it provides the 'rdma' utility
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit d48a8beb39)
[Peter: drop Makefile change]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 8450b76918 (package/pkg-cargo: move CARGO_HOME into DL_DIR)
allowed for a shared cargo cache of crates. Internally, cargo is
supposed to lock themselves when accessing that cache, and that commit
even had some research in that area, pointing at [0] for complaints
about too-coarse the lock, so it was deemed safe to have a shared cargo
home.
However, in practice, the locking as implemented by cargo, fails to
properly protect the concurrent accesses to the crates cache, with random
failures that manifest themselves like so:
Blocking waiting for file lock on package cache
Blocking waiting for file lock on package cache
Downloading crates ...
error: failed to sync
Caused by:
failed to download packages
Caused by:
failed to download `autocfg v1.1.0`
Caused by:
unable to get packages from source
Caused by:
failed to unpack package `autocfg v1.1.0`
Caused by:
failed to unpack entry at `autocfg-1.1.0/src/tests.rs`
Caused by:
No such file or directory (os error 2) while canonicalizing [...]
with the last few errors sometime being:
Caused by:
failed to parse manifest at `[...]/aho-corasick-0.7.18/Cargo.toml`
Caused by:
can't find library `aho_corasick`, rename file to `src/lib.rs` or specify lib.path
So, as we do not systematically use our own cargo build (we can use a
pre-built one with host-rust-bin), we can't patch cargo (even if we knew
what to do!).
Instead, we implement a lock ourselves, by wrapping the call to "cargo
vendor" with a flock(1) on cargo home.
Note: the download wrapper is already flock-ed, but it is a per-package
lock, so it does not prevent different packages from being downloaded in
parallel; if those packages need cargo vendoring, that will not be
protected by the flock on the dl wrapper. So we really do need a flock
on cargo home.
[0] https://github.com/rust-lang/cargo/issues/6930
Fixes: 8450b76918
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Moritz Bitsch <moritz@h6t.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit de4cf25375 (package/{rust, rust-bin}: bump to version 1.66.0)
forgot, despite the big comment above the version strings, to confirm
that the vendoring was still working.
Previously, we were adding the vendoring equivalence manually, but in
commit 04154a6517 (support/download/cargo-post-process: cargo output
for vendor config), we switched to using the output of "cargo vendor"
(on stdout) to support cases were the vendoring equivalence would be
more complex (e.g. when using crates not hosted on crates.io).
With rust until and including 1.65.0, "cargo vendor" would output (for
crates.io crates) the same output as our manual fixups, except it was
preceded by an empty line. So, to avoid recompting all our hashes, we
added a tweak to strip away the leading empty line in 04154a6517.
But rust 1.66.0 includes [0] which changes the output (on stdout) of
"cargo vendor", where the first empty line is no longer emitted.
This means that our tweak for rust 1.65.0 now strips out an important
part of the cargo vendor output, which renders the archives invalid, and
thus generates different archives, which fail to validate against our
hashes.
Fix this by doing what the comment in the post-process helper states,
and just keep the whole output of "cargo vendor", by just removing the
"tail --lines=+2". Since that comment is no longer meaningful, we drop
it too.
Now, all our 6 cargo-based packages, as well as our 5 python packages
that have rust code, can be vendored again, without changing our hashes,
but most importantly, with valid archives.
Still, we keep the comment above the versions strings, in the hope that
a future bumper will notice and be more careful at validating the
vendoring.
[0] https://github.com/rust-lang/cargo/pull/11273
Fixes:
http://autobuild.buildroot.org/results/bea/beac7674bbc9fd2f8777b5861f65afee9c485753/ (bat)
http://autobuild.buildroot.org/results/d1e/d1ec1ebbde115628a4b8b9099544347242a97c1c/ (dust)
http://autobuild.buildroot.org/results/f96/f968be895be9ca98b314fdd688ef8d3bdf4e5dfb/ (hyerfine)
http://autobuild.buildroot.org/results/a0c/a0cdb6cc9493f5248d98f98b13da854e12adc2be/ (ripgrep)
... and so many others...
Reported-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: James Hilliard <james.hilliard1@gmail.com>
Cc: Simon Richter <simon.richter@ptwdosimetry.com>
Reviewed-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Tested-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Reviewed-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr:
- select host-cython in Config.in
- introduce obj_path in test sample
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, when asserting that a command succeeded, we just capture the
return code of the command. If that is not zero, the assertion fails,
but the error message is not very splicit:
AssertionError: 1 != 0
Replace the error message with an explicit message that dumps the failed
command, the error code, and the resulting output.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 86d32208b6 (support/testing/tests/init/test_systemd.py: use
downloaded kernel) stopped building a custom kernel for the systemd
tests, but forgot to drop the associated kernel config fragment.
That fragment is now not used in any test case, so we can drop it.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Z3, also known as the Z3 Theorem Prover, is a cross-platform
satisfiability modulo theories (SMT) solver.
https://github.com/Z3Prover/z3
Signed-off-by: Julien Olivain <ju.o@free.fr>
[yann.morin.1998@free.fr:
- python bindings 'depends on' python, not 'select' it
- fix check-package in test_z3.py
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 25680e6aa8)
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Compilation of Perl-related packages fails if `PERL_MM_OPT` is defined.
We previously issued an error in this case.
Instead, simply `unexport` the variable.
Signed-off-by: Gleb Mazovetskiy <glex.spb@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Back when support/testing/tests/package/test_gdb was introduced, there
was a significant difference in how gdb < 10 and gdb >= 10 were
handled in gdb.mk, which explained why we were testing both gdb 9.x
and gdb 11.x.
However, support for gdb 9.x has now been dropped, and we only support
gdb >= 10.x, so testing gdb 9.x and 11.x separately no longer make
much sense. In addition:
- other GDB tests in the same file already test the default version,
which is now 11.x, meaning we in fact have duplicated tests between
the ones testing the default version and the ones testing 11.x
specifically
- GDB 9.x has been removed, which means all the tests testing GDB 9.x
are failing, with a Config.in.legacy build error.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3249828456 (TestGdbHostOnly9x)
https://gitlab.com/buildroot.org/buildroot/-/jobs/3249828454 (TestGdbHostGdbserver9x)
https://gitlab.com/buildroot.org/buildroot/-/jobs/3249828451 (TestGdbHostGdbTarget9x)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The CPIO filesystem generated by the test_python_crossbar test is too
large, and doesn't fit as an initramfs in the 256MB of RAM available
in the versatilepb machine. This causes a "Initramfs unpacking failed:
write error" when booting, and many files being missing from the root
filesystem, ultimately causing the test to fail.
It would make sense to switch all test cases to use ext2 + a
hard-drive, but for now, let's fix the few test cases that are causing
problems.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3249828587
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It seems like on Gitlab CI, the runners are quite slow, and the Flask
server does not startup in the 15 seconds we give it. So increase this
to 30 seconds before trying to contact the Flask server.
Hopefully fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3249828594
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Docker compose up outputs terminal control characters intended for
interactive output viewing.
Wget similarly can use the -q option to produce quieter logs.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Docker compose is now invoked as "docker compose" not "docker-compose."
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3249828442
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the output of `cargo vendor` to generate the vendor configuration.
Fixes the need to patch the generated configuration if there are
non-crates.io dependencies.
Note:
`cargo vendor` currently prints a newline before it prints the
needed configuration.
This is fixed in +nightly, will end up in +stable soon and must
be considered when updating cargo.
See: https://github.com/rust-lang/cargo/pull/11273
Until then it is needed to remove this first line to make sure
that the contents of .cargo/config will be the same as they were
generated with the earlier version of the script. Thus, the
hashes of the packages that use this script remain the same.
Signed-off-by: Simon Richter <simon.richter@ptwdosimetry.com>
[yann.morin.1998@free.fr: add comment in rust-bin.mk and rust.mk]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Startig with glibc 2.34, the gconv modules description has been split in
two:
- a common definition in the old location, /usr/lib/gconv/gconv-modules
- specific definitions in a subdirectory, /usr/lib/gconv/gconv-modules.d/
This is done so as to simplify the handling of glibc gconv modules, and
eventually to segregate those outside of glibc, and so that third-parties
may also provide their own gconv converters and their definitions.
And starting with that same glibc version, most of the gconv modules
definitions are moved to an extra configuration file in that
sub-directory.
It is thus no longer possible to use special code pages, like cp850,
which are very useful to access FAT-formatted devices.
Add support for this new gconv layout, while keeping support for older
glibc versions. Note that the modules themselves are not moved or
renamed, just the definition files have changed.
Instead of passing the one old gonv modules definitions file on stdin,
we pass the base directory to that file, and move into the script the
responsibility to find all the gconv definition files.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When only a subset of the glibc gconv modules are installed, we need to
generate a trimmed-down list of available modules. We currently use gawk
for that.
However, we are not using any GNU extension in that awk script, and it
happens to work as expected when using mawk (which has no GNU
extension).
Commit 11c1076db9 (toolchain: add option to copy the gconv libraries)
did not explain why it used gawk explicitly, and given the age for that
commit, we doubt we'd be able to have the involved participants recall
anything from that period...
Besides, gawk is not a requirement for Buildroot.
Switch over to using plain awk.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Newest versions requires a bit more time to finish.
Signed-off-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 25d865996d)
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Any .pyc files generated by the pycompile script during target
finalization are currently counted in the "Unknown" package,
because packages-file-list.txt only contains the source .py file.
If a .py file is added to filesdict, add the corresponding .pyc
file as well.
Signed-off-by: Michael Klein <m.klein@mvz-labor-lb.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Polkit has two directories that are used to store rules.
Add the second directory to the existing tests, to ensure
that both work in the future.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Check that dependencies that are DT_NEEDED by a program are
automatically copied by dracut. We use cramfs, the package,
as it is small and just depends on libz.
Test more than one dracut config file.
Reported-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thierry Bultel <thierry.bultel@linatsea.fr>
Cc: Adam Duskett <aduskett@gmail.com>
[Arnout: remove test for features that haven't been merged yet]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Since we do not pivot_root/switch_root from the cpio, whatever we get
in the rootfs was exactly what we got by listing the cpio archive.
Drop the test for the presence of pv, it's redundant.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thierry Bultel <thierry.bultel@linatsea.fr>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Due to a bug in the CodeSourcery ARM toolchain packaging, this
toolchain currently appears as available even for noMMU
configurations, which is obviously wrong. Due to this, the
bootlin-armv7m-uclibc.config fragment ends up using the CodeSourcery
ARM toolchain, which is obviously wrong for an ARM noMMU
configuration, causing a build failure when matching the toolchain
capabilities with the configuration.
Even though we will separately fix the CodeSourcery ARM toolchain
packaging, it makes sense to ensure that the
bootlin-armv7m-uclibc.config fragment explicitly selects the Bootlin
toolchain.
Reported-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This tests valdates that we can publish a message and read it back.
Signed-off-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr:
- don't manually start mosquitto, there's a startup script for that
- don't pass custom timeout
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit bf0d8c9659)
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes flake8 errors:
support/scripts/pkg-stats:1013:133: E501 line too long (164 > 132 characters)
support/scripts/pkg-stats:1018:36: F541 f-string is missing placeholders
support/scripts/pkg-stats:1110:199: E261 at least two spaces before inline comment
For the first and the last one, we chose to split the long lines rather
than adding noqa: 501. Indeed, the long lines make it very unreadable,
and there are relatively natural places where the line can be broken.
Also split a line just below the second one in a similar way.
The f-string on 1018 doesn't need to be an f-string.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This is done either by switching to single quoted f-strings, triple
double quoted f-strings when needed, or simply single-quoted strings.
The renderer HTML is exactly identical before/after this commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-By: Sen Hastings <sen@phobosdpl.com>
Acked-By: Sen Hastings <sen@phobosdpl.com>
Within single-quoted f-strings, and within triple double quoted
strings, escaping all the double quotes is completely useless and
makes the code more difficult to read. Get rid of all this useless
escaping.
The renderer HTML is exactly identical before/after this commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-By: Sen Hastings <sen@phobosdpl.com>
Acked-By: Sen Hastings <sen@phobosdpl.com>
The python installer package isn't able to overwrite files of packges
that already exist, this causes problems when doing a rebuild or
update without a full clean.
To fix this we can use functionality from importlib to identify and
remove any conflicting python package files before installation.
We also need to use internals from python-installer, as we want to use
the same logic as pyinstaller uses internally for getting the scheme so
that we ensure we clean the correct package scheme (we want it to be the
same as the one we're installing)
Fixes:
Traceback (most recent call last):
File "/home/buildroot/buildroot/support/scripts/pyinstaller.py", line 69, in <module>
main()
File "/home/buildroot/buildroot/support/scripts/pyinstaller.py", line 61, in main
install(
File "/home/buildroot/buildroot/output/host/lib/python3.10/site-packages/installer/_core.py", line 109, in install
record = destination.write_file(
File "/home/buildroot/buildroot/output/host/lib/python3.10/site-packages/installer/destinations.py", line 207, in write_file
return self.write_to_fs(scheme, path_, stream, is_executable)
File "/home/buildroot/buildroot/output/host/lib/python3.10/site-packages/installer/destinations.py", line 167, in write_to_fs
raise FileExistsError(message)
FileExistsError: File already exists: /home/buildroot/buildroot/output/target/usr/lib/python3.10/site-packages/tinycss2/__init__.py
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Tested-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
[yann.morin.1998@free.fr:
- extend commit log about the use of the installer internals (the
symbols prefixed with '_')
- check path.files against explicitly None
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The python installer cli isn't able to overwrite files of packages
that already exist, this causes problems when doing a rebuild or
update without a full clean.
Since we need to add functionality to our pyinstaller.py script to fix
this issue we must also use pyinstaller.py for host python packages.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Tested-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 7652817c93 updated the
documentation but forgot to update support/dependencies
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
It includes a simple test for the full cpio image, and a test of the
dracut image. To validate that the dracut image is a subset of the full
image, 'pv' is added to the image, and the test verifies that pv is not
part of the image. Note that the real rootfs is not mounted at the
moment, so pv is never available in the running image.
Systemd and other init systems are currently untested.
Signed-off-by: Thierry Bultel <thierry.bultel@linatsea.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The CPIO filesystem generated by the test_python_s3transfer test is
too large, and doesn't fit as an initramfs in the 256MB of RAM
available in the versatilepb machine. This causes a "Initramfs
unpacking failed: write error" when booting, and many files being
missing from the root filesystem, ultimately causing the test to fail.
It would make sense to switch all test cases to use ext2 + a
hard-drive, but for now, let's fix the few test cases that are causing
problems.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2884635126
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- drop superfluous# BR2_TARGET_ROOTFS_TAR is not set
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The CPIO filesystem generated by the test_python_botocore test is too
large, and doesn't fit as an initramfs in the 256MB of RAM available
in the versatilepb machine. This causes a "Initramfs unpacking failed:
write error" when booting, and many files being missing from the root
filesystem, ultimately causing the test to fail.
It would make sense to switch all test cases to use ext2 + a
hard-drive, but for now, let's fix the few test cases that are causing
problems.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2884635042
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- drop superfluous# BR2_TARGET_ROOTFS_TAR is not set
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The CPIO filesystem generated by the test_python_boto3 test is too
large, and doesn't fit as an initramfs in the 256MB of RAM available
in the versatilepb machine. This causes a "Initramfs unpacking failed:
write error" when booting, and many files being missing from the root
filesystem, ultimately causing the test to fail.
It would make sense to switch all test cases to use ext2 + a
hard-drive, but for now, let's fix the few test cases that are causing
problems.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2884635041
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- drop superfluous# BR2_TARGET_ROOTFS_TAR is not set
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In commit
9267b0f14d ("package/f2fs-tools: bump to
version 1.15.0"), f2fs-tools was bumped from 1.14.0 to 1.15.0.
It turns out that this version bump causes the output of dump.f2fs to
slightly change.
In version 1.14.0, it looked like this:
Info: Segments per section = 1
Info: Sections per zone = 1
Info: sector size = 512
Info: total sectors = 262144 (128 MB)
Info: MKFS version
"Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 2022"
Info: FSCK version
from "Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 20
22"
to "Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 20
22"
Info: superblock features = 0 :
Info: superblock encrypt level = 0, salt = 00000000000000000000000000000000
Info: total FS sectors = 262144 (128 MB)
Info: CKPT version = 70c101c3
Info: checkpoint state = 181 : trimmed nat_bits unmount
In version 1.15.0, it looked like this:
Info: MKFS version
"Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 2022"
Info: FSCK version
from "Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 20
22"
to "Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 20
22"
Info: superblock features = 0 :
Info: superblock encrypt level = 0, salt = 00000000000000000000000000000000
Info: Segments per section = 1
Info: Sections per zone = 1
Info: total FS sectors = 262144 (128 MB)
Info: CKPT version = b89f8bb
Info: checkpoint state = 181 : trimmed nat_bits unmount
You will notice that the message "Info: total sectors = 262144 (128
MB)" is no longer present, and only "Info: total FS sectors =
262144 (128 MB)" is not present.
Except our test case was precisely looking for this "Info: total
sectors" string in the output, causing the test to fail.
We fix this by simply matching on "Info: total FS sectors" now.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2884634814
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Octave package test can occasionally fail due to timeout while testing
some octave modules. This commit slightly increase the timeout value
to reduce those failures.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit makes sure that the python-crossbar package pulls in the
right dependencies, based on the requirements-min.txt.
It does so by:
- Changing the 0002-Remove-idna-requirement patch by a more thorough
patch that drops all indirect dependencies from
requirements-min.txt, making it easier to have a 1:1 mapping
between lines in requirements-min.txt and Buildroot selects.
- Changing the
0003-crossbar-webservice-wap-use-markupsafe-instead-of-we patch to
update requirements-min.txt to indicate the new MarkupSafe
dependency. Here again, to have a 1:1 mapping between lines in
requirements-min.txt and Buildroot selects.
- Updating the Buildroot selects to match requirements-min.txt, with
relevant comments when it does not.
- Fixing up the Crossbar test case to no longer force autobahn to use
umsgpack. Instead, we now use the default of msgpack that is
expected by autobahn.
Fixes bug #14556, https://bugs.busybox.net/show_bug.cgi?id=14556.
Signed-off-by: Emile Cormier <emile.cormier.jr@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
python-scipy is moving to a meson build infrastructure, and requires
fortran cross-compilation. This commit extends the cross-compilation
configuration file generated for use by meson to add the "fortran",
"fortran_args" and "fortran_link_args" properties.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
construct is a Python library for declarative serialization/
deserialization of structured binary data.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Test the scipy::io module, to demonstrate that runtime dependencies
are correct.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Importing the scipy module in the Python interpreter running in Qemu
takes quite a while on slow machine, so a timeout extension to 30
seconds is needed to make sure the test has the time to run.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This adds an optional linebreak at the vendor attribute in the CPE ID.
It should be noted this is purely for formatting/layout purposes
and does not actually insert any additional characters
(newline or otherwise) into the rendered text.
This means that even though the text renders across two lines,
copy-pasting will still yield one line of text.
example: https://sen-h.github.io/pkg-stats/c245575.html
see also: https://developer.mozilla.org/en-US/docs/Web/HTML/Element/wbr
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Change the test into a characterization test for all warnings and errors
get-developers can return when parsing the DEVELOPERS files.
It will be helpful when changing the behavior of get-developers to bail
out on all syntax checking warnings.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This test relies on the OLA Dummy plugin presenting a test device
and port. It starts the daemon, performs few configuration commands,
covers the Python bindings and also test the OLA web interface.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Arnout:
- Indent hash file with two spaces.
- Bump to 1.7.3 to fix build failure with recent GCC.
- Get from github instead of PyPI.
- Add host-meson and host-python-pythran dependencies.
- Properly propagate Config.in dependencies.
- Correct usage of BR2_INSTALL_LIBSTDCPP symbol.
- Remove F77, no longer used.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Guillaume:
- -lnpymath: npymath.ini localization problem
- -lnpyrandom resolution problem
- fix legal-info for latest version LICENSE.txt
- zlib is a scipy::io module runtime requirement
- update serie for scipy 1.8.1 (latest)
]
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
[Thomas:
- add runtime test
- drop dependency on OpenBLAS, which is not needed in a minimal
configuration
- remove PYTHON_SCIPY_NPY_PKG_CONFIG_PATH logic as it is no longer
needed
]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This attempts to re-implement the "sortable_hint" feature without
relying on words. The column headers and CVE expand/contract buttons
change color and cursor style on hover.
If Javascript is enabled:
Just like [PATCH 1/3] more rules are applied to the
generated stylesheet before content is loaded.
If Javascript is disabled:
The headers stay pearly white. :-)
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Sometimes a package can have a lot of CVEs.
Rather than have the CVE cell make a really tall row
(that means you have to scroll a bunch) this collapses the CVE
cell to a fixed size scrollable element with a
sticky button that lets you expand and collapse it.
If Javascript is enabled:
A stylesheet is generated and appended before content rendering,
amending the cells style to have a fixed height and overflow.
Also, the expand/contract button is unhidden.
This means the CVE cells are rendered in a collapsed state
instead of being rendered in an expanded state and then
slamming shut.
This avoids a "flash" and *helps* (vertically at least) manage CLS
(cumulative layout shift).
see: https://web.dev/cls/
If Javascript is disabled:
The cells stay fully open and the expand/contract button stays hidden.
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit c4e6d5c8be (core: implement per-package SDK and target)
introduced leading TABs in that otherwise-space-indented script.
Convert all to spaces, for homogeneity
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Back many years ago, we developed an Eclipse plugin that simplified
the usage of Buildroot toolchains. Enabling the BR2_ECLIPSE_REGISTER=y
was registering the Buildroot toolchain into a special file in your
HOME folder that the Eclipse plugin would recognize to allow to
directly use the Buildroot cross-compiler.
This Eclipse plugin has not been maintained for years. The last commit
in the repository dates back from September 2017. Since then Eclipse
has moved on, and the plugin is no longer compatible with current
versions of Eclipse.
Also, Eclipse is probably no longer that widely used in the embedded
Linux space, as other more modern IDEs have become more popular.
All in all, it's time to say good bye to this Eclipse integration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is a simple test importing pyalsa, showing alsa library version and
attempting to list cards.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It's time to finally switch over globally to the new spacing format
that we have agreed on for the hash file, with 2 spaces as a separator
between fields.
This commit was mechanically generated using:
find . -type f -name '*.hash' | xargs sed -i 's%^md5[ \t]*\([^ \t]*\)[ \t]*\(.*\)$%md5 \1 \2%'
find . -type f -name '*.hash' | xargs sed -i 's%^sha1[ \t]*\([^ \t]*\)[ \t]*\(.*\)$%sha1 \1 \2%'
find . -type f -name '*.hash' | xargs sed -i 's%^sha256[ \t]*\([^ \t]*\)[ \t]*\(.*\)$%sha256 \1 \2%'
find . -type f -name '*.hash' | xargs sed -i 's%^sha512[ \t]*\([^ \t]*\)[ \t]*\(.*\)$%sha512 \1 \2%'
This commit can easily be backported on the LTS branch by re-running
the same commands, if needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 2e399893b4)
[Peter: drop Makefile change]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
sortGrid() has been rewritten to dynamically generate stylesheets with
explicit grid-row properties to re-order the rows, instead of removing
and reinserting the cells.
Performance *should* now be comperable to sorttable.js.
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Like all good problems, disparate pieces work together to create
a "synergistically" hairy mess.
The sortGrid() overhaul highlighted a flaw in pkg-stats allowing
for duplicate package class names across rows.
As an example,
boot/barebox/barebox.mk and boot/barebox/barebox/barebox.mk
both get the classname ._barebox and so sortGrid() sticks them on
the same line giving a table with a vestigal row sticking out
of the right side like some kind of appendage.
Also I neglected to add a "_" to the current version column's cells
pkgname class so instead of "._pkgname" we had ".pkgname" and so
the cells were not collected properly as part of the row.
These issues explain the formatting weirdness.
package classnames are now ".path_to_package_makefile" without suffix
(.mk) (so ._boot_barebox_barebox and ._boot_barebox_barebox_barebox
instead of ._barebox) in order to guarantee uniqueness.
and what was *accidentally*
class="centered current_version data .barebox" is now
class="centered current_version data ._boot_barebox_barebox"
just like *all* the other cells in the row. :p
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add four new tests for systemd (rw and ro in each case):
- use dbus-broker instead of the original dbus
- use the original dbus, with dbus-broker installed
The first two extend the existing IfUpDown test cases by just enabling
dbus-broker; the second ones extend this further, by explicitly enabling
the original dbus.
For one of the tests, we overload the test_run() function to test that
the dbus-broker daemon is indeed running as root. We need not replicate
that check in the other dbus-broker-only test, and it does not make
sense to test that in tests that have the original dbus enabled.
Presence of the original dbus and dbus-broker on the same system is
valid: the original dbus is used as the default system bus daemon. We do
not test switching between the two at runtime, though as this is really
too corner-case specific. We just test to ensure the original dbus
system bus daemon is not impacted by the presence of dbus-broker.
Note: the 'full' test-case enables all systemd options, and some of them
do pull the original dbus package, so we can't use that to test the
integration of dbus-broker; instead, we extend the ifupdown case, which
does not enable the original dbus.
The default external toolchain for cortex-A9 is the old ARM toolchain
which has kernel headers 4.10 Since dbus-broker needs toolchain headers
>= 4.17, it can't be selected with this toolchain. Switch the systemd
tests to the Bootlin toolchains instead. We switch all of them to make
things easier. Note that we will need to take care in the future that
the headers version used in the bootlin toolchain doesn't get bigger
than the kernel that is used. The kernel is currently 5.10, the headers
in the bleeding edge bootlin toolchain are 5.4.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The 'rtl8723ds' name, when queried from release-monitoring.org at
https://release-monitoring.org/api/projects/?pattern=rtl8723ds returns
one project, with one "stable_versions" array, which is empty. This
was not expected by the pkg-stats code, causing an exception:
Task exception was never retrieved
future: <Task finished name='Task-764' coro=<check_package_latest_version_get() done, defined at /home/thomas/projets/buildroot/./support/scripts/pkg-stats:558> exception=IndexError('list index out of range')>
Traceback (most recent call last):
File "/home/thomas/projets/buildroot/./support/scripts/pkg-stats", line 566, in check_package_latest_version_get
if await check_package_get_latest_version_by_guess(session, pkg):
File "/home/thomas/projets/buildroot/./support/scripts/pkg-stats", line 544, in check_package_get_latest_version_by_guess
projects[0]['stable_versions'][0],
IndexError: list index out of range
This commit therefore improves the checks done on the results received
from release-monitoring.org to avoid this issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Pretty straightforward. Adds my name to copyright notice.
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
CSS classes are generated for each package name for sorting purposes,
However some package names start with a number and this is not allowed.
(see https://www.w3.org/TR/CSS2/syndata.html#value-def-identifier)
Fix is to prepend a character to every class name such as "_".
so every ".package" is now "._package".
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This fixes the .version-needs-update class being overridden by .correct class.
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Somewhere between binutils 2.35 and 2.37, some functionality was
added in readelf to parse more DWARF information. Unfortunately, as
reported in binutils bug
28981 ("https://sourceware.org/bugzilla/show_bug.cgi?id=28981"), this
feature causes a number of fairly scary warnings to be displayed when
running readelf on binaries built with Clang, such as the pre-built
rustc and rustdoc binaries part of the host-rust-bin package. It
looks like this:
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x23
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Bogus end-of-siblings marker detected at offset 2f in .debug_info section
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Bogus end-of-siblings marker detected at offset 10b in .debug_info section
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Bogus end-of-siblings marker detected at offset 10c in .debug_info section
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Further warnings about bogus end-of-sibling markers suppressed
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x23
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x23
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x23
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x23
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: DIE at offset 0x1da refers to abbreviation number 5827 which does not exist
These warnings are caused by the readelf calls done by the
support/scripts/check-host-rpath script. The annoying thing is that
once host-rust-bin has been installed in $(HOST_DIR), this warning
appears after the installation of every single host package, because
support/scripts/check-host-rpath rescans all binaries every time.
To avoid showing those scary warnings, this commit sends the error
output of readelf to /dev/null.
Of course, it would be nicer to only filter out those warnings, but
filtering the error output without merging the error output into the
standard output is tricky, so let's keep things simple. If there is
really an error, readelf will abort.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since systemd requires a relatively new kernel, we switched to a
self-built 4.19.204 kernel. However, since then, the downloaded kernel
used by the tests has been updated to 5.10, which is certainly recent
enough to support systemd. Switch to this one. This reduces the test
time significantly.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The --testcases option of run-tests says how many test cases to build in
parallel. It automatically derives a jlevel from it by dividing the
number of cores + 1 by the number of parallel testcases. However, this
will typically result in a fractional number. Make doesn't like
fractional numbers as argument to -j.
Convert the number to integer (rounding down).
* br2_jlevel is an int, as multiprocessing.cpu_count() is an int, so it
will be always >=2 (cpu_count() raises an error if it can't determine
the number of CPU, so it will always return at least 1);
* args.testcases is an int, and is checked to be >=1
So br2_jlevel + args.testcases is guaranteed to always be bigger
than or equal to args.testcases, and the division thus bigger than 1.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr:
- ensure division provide at least 1
- drop the test below
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The first three lines of all systemd runtime tests are identical, and
they already call into a common function. Therefore, move those lines
into the common function as well.
We need to pass an additional argument for the rootfs type. This changes
the signature, which could create confustion with
InitSystemBase.check_init() that has a different signature. Therefore,
rename the function to check_systemd(). That also allows us to call
self.check_init() directly instead of going through super().
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As for the Buildroot testsuite, multiply every emulator timeout by 10
to avoid sporadic failures in elastic runners.
qemu_arm_vexpress_tz_defconfig tested locally with sucess.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1970084046
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, glibc depends on !BR2_STATIC_LIBS in all the toolchain
variants.
However, for some architectures, glibc is the only supported libc. In
commit 3b3105328e ("Config.in: only
allow BR2_STATIC_LIBS on supported libc/arch"), we implemented a fix
to avoid configurations were BR2_STATIC_LIBS=y with an architecture
already supported by glibc, because these configurations are
impossible. This commit 3b3105328e
prevents from selecting BR2_STATIC_LIBS=y when the C library used for
the internal toolchain backend is glibc.
However, it introduces a discrepency between how this topic is handled
for internal and external toolchains:
- For internal toolchains, we prevent BR2_STATIC_LIBS=y if glibc is
chosen.
- For external toolchains, we allow BR2_STATIC_LIBS=y in all cases,
and it's each glibc toolchain that has !BR2_STATIC_LIBS
This commit addresses this discrepency by preventing BR2_STATIC_LIBS=y
if glibc is chosen in all cases.
Thanks to this, we can remove the !BR2_STATIC_LIBS dependency on both
the glibc package, and all glibc external toolchains.
Fixes: https://bugs.busybox.net/show_bug.cgi?id=14256
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: update to master, fix the gen-bootlin-toolchains script, add
a comment in the static/shared choice to indicate that static is
supported only with uclibc or musl]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
cmp from diffutils is part of the host system requirements, so check
for it. It is used in package/pkg-generic.mk.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit is based on earlier work from Łukasz Stelmach
<l.stelmach@samsung.com> to add support for different page sizes on
ARM64.
In his initial submission, Łukasz took an approach similar to this
one, i.e make it ARM64-specific. Following the feedback on the mailing
list, his second version [1] tried to generalize the logic to
configure the page size between architectures. But the general
consensus during the review process was that there wasn't much to
generalize in the end.
So, this new iteration is back to a simpler approach:
* We have new options in Config.in.arm to configure the page
size. Only 4 KB and 64 KB are supported, because our testing in
Qemu and real hardware has not allowed to get a successful setup
for 16 KB pages. We can always re-add support for 16 KB later if
that is resolved.
* The logic to define the ARCH_TOOLCHAIN_WRAPPER_OPTS options is
moved from the ARC-specific file to arch/arch.mk, and extended to
cover ARM64.
* The appropriate logic in uclibc.mk and linux.mk is added to tweak
the relevant configuration options.
* A test case is added in the runtime test infrastructure to test
building and booting under Qemu a 64 KB configuration, with all 3 C
libraries.
For the regular configuration of 4 KB pages, this commit makes one
functional change: on ARM64, -Wl,-z,max-page-size=4096 is now passed in
the compiler flags of the wrapper.
[1] https://patchwork.ozlabs.org/project/buildroot/list/?series=275452
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When compiling Qt6 applications for the target, CMake needs to have
two variables defined to find the host installation of Qt. These two
variables are unconditionally defined, regardless of whether Qt6 is
enabled in the configuration or not, as they do no harm when Qt6 is
not present/used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: José Pekkarinen <jose.pekkarinen@unikie.com>
[Thomas: add test case, add missing dependencies]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When we use the statistics output to generate a CVE/CPE customer
report showing whether a product is affected by CVEs, we are primarily
interested in whether they are relevant to the target
system. Currently we cannot see if the package is configured for the
build (infra==host) and/or the target system (infra==target).
Therefore this commit extends the pkg-stats script to leverage the
information available in "make show-info" output to tweak the list of
package infrastructures for each package. Thanks to this commit, the
script now has a more consistent behavior:
* When pkg-stats is run without -c, i.e without a defined Buildroot
configuration, it continues to operate as it did, i.e it lists all
package infrastructures supported by the package (such as autotools
host+target, or kconfig target, etc.)
* When pkg-stats is run with -c, i.e with a defined Buildroot
configuration which defines the list of packages that should be
considered, then for each package it now lists only the package
infrastructures used by the package in that current
configuration. For example if you have a package with a host and
target variant, but only the host variant is used in your
configuration, now the pkg-stats output will only say that the host
variant of this package is used;
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[Thomas: pretty much rework the entire implementation and how the
result is presented.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It's been ages (5 years at the next release) that we've not installed
host packages in $(HOST_DIR)/usr, but we still have a few packages that
reference it or install things in there.
Drop all of those in one fell swoop.
The run-time test still succeeds, and the following defconfig, which
should exercise all touched packages [*], does build:
BR2_x86_i686=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_INIT_NONE=y
BR2_SYSTEM_BIN_SH_NONE=y
# BR2_PACKAGE_BUSYBOX is not set
BR2_PACKAGE_GAWK=y
BR2_PACKAGE_GETTEXT=y
BR2_PACKAGE_ABOOTIMG=y
BR2_PACKAGE_DBUS_PYTHON=y
BR2_PACKAGE_OLA=y
BR2_PACKAGE_JIMTCL=y
BR2_PACKAGE_LUA=y
# BR2_PACKAGE_LUA_32BITS is not set
BR2_PACKAGE_ARGPARSE=y
BR2_PACKAGE_PERL=y
BR2_PACKAGE_PHP=y
BR2_PACKAGE_PHP_APCU=y
BR2_PACKAGE_PHP_LUA=y
BR2_PACKAGE_PHP_PAM=y
BR2_PACKAGE_PHP_PECL_DBUS=y
BR2_PACKAGE_PYTHON3=y
BR2_PACKAGE_PYTHON_CRYPTOGRAPHY=y
BR2_PACKAGE_PYTHON_PLY=y
BR2_PACKAGE_PYTHON_PYBIND=y
BR2_PACKAGE_LIBVA=y
BR2_PACKAGE_BIND=y
BR2_PACKAGE_BIND_SERVER=y
BR2_PACKAGE_BIND_TOOLS=y
BR2_PACKAGE_APPARMOR=y
BR2_PACKAGE_APPARMOR_BINUTILS=y
BR2_PACKAGE_APPARMOR_UTILS=y
BR2_PACKAGE_APPARMOR_UTILS_EXTRA=y
BR2_PACKAGE_APPARMOR_PROFILES=y
BR2_PACKAGE_REFPOLICY=y
BR2_PACKAGE_URANDOM_SCRIPTS=y
BR2_PACKAGE_BASH=y
# embiggen-disk to exercise go
BR2_PACKAGE_EMBIGGEN_DISK=y
BR2_TARGET_GRUB2=y
BR2_TARGET_GRUB2_I386_PC=y
BR2_TARGET_GRUB2_I386_EFI=y
[*] exceptions:
- zfs was not tested: it needs a kernel to be built;
- compiler-rt was not tsted: it needs llvm to be built, that takes
ages, and other packages already reference the correct location for
llvm-config, so it was assumed that is OK.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Cc: Anisse Astier <anisse@astier.eu>
Cc: Antoine Tenart <atenart@kernel.org>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Christian Stewart <christian@paral.in>
Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Cc: Francois Perrad <francois.perrad@gadz.org>
Cc: Guillaume William Brs <guillaume.bressaix@gmail.com>
Cc: Hervé Codina <herve.codina@bootlin.com>
Cc: James Hilliard <james.hilliard1@gmail.com>
Cc: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Cc: Julien Boibessot <julien.boibessot@armadeus.com>
Cc: Julien Olivain <ju.o@free.fr>
Cc: Matt Weber <matthew.weber@collins.com>
Cc: Nicolas Carrier <nicolas.carrier@orolia.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Vadim Kochan <vadim4j@gmail.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
---
Changes v1 -> v2:
- fix new instance that have crept in (Romain)
