Commit Graph

447 Commits

Author SHA1 Message Date
Fabio Estevam
d704045a14 boot/uboot: bump to version 2017.05
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-05-23 15:41:48 +02:00
Christian Stewart
b7f095920a uboot: fix target uboot defconfig warning
The warning currently reads:

  No board defconfig name specified, check your
  BR2_TARGET_UBOOT_DEFCONFIG setting.

It should read:

  No board defconfig name specified, check your
  BR2_TARGET_UBOOT_BOARD_DEFCONFIG setting.

Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-04-22 15:05:50 +02:00
Benoît Allard
6e432d5ecb syslinux: build with the target toolchain
Until now, the host toolchain was used to build syslinux, as it was
not possible to build a 32-bit syslinux with a x86-64 toolchain.

However, syslinux requires gnu-efi, and gnu-efi is built using the
target toolchain. Mixing different toolchains doesn't work well, so
this commit changes the syslinux package to use the target toolchain
for syslinux as well. This is made possible by patches
0003-Fix-ldlinux.elf-Not-enough-room-for-program-headers-.patch and
0004-memdisk-Force-ld-output-format-to-32-bits.patch.

Since syslinux also contains some utilities that have to run on the
host, those have to continue being built with the host toolchain,
which requires patch 0005-utils-Use-the-host-toolchain-to-build.patch.

Patch 0006-lzo-Use-the-host-toolchain-for-prepcore.patch is about
building prepcore, another utility with the host toolchain as it is
required at build-time.

This was tested using a Buildroot's built x86_64 toolchain, and
checked that the output binaries are 32-bits. It was tested as well if
they actually boot on hardware.

Signed-off-by: Benoît Allard <benoit.allard@greenbone.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-04-08 16:07:49 +02:00
Michael Trimarchi
61038e36b6 uboot: qstrip BR2_TARGET_UBOOT_CUSTOM_DTS_PATH
We need to avoid failing of copy of custom dts using cp -f <>
command. So, just qstrip the variable as is done for other
configuration options.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Tested-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-04-08 15:29:01 +02:00
James Balean
4f50f4928c Add out-of-source U-Boot device tree support
Similaly to Linux, this patch adds the ability to copy in and build
out-of-source device tree sources during a U-Boot build.

Signed-off-by: James Balean <james@balean.com.au>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-04-05 22:29:23 +02:00
Thomas Petazzoni
34da6a65ad syslinux: use Git formatted patches
In preparation for the addition of more patches to the syslinux
package, reformat the two existing patches as proper Git formatted
patches.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-04-05 22:06:06 +02:00
Rahul Bedarkar
96e9480fbc boot, package: use SPDX short identifier for BSD-2c
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for BSD-2c is BSD-2-Clause.

This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/BSD-2c/BSD-2-Clause/g'

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-04-01 15:27:05 +02:00
Rahul Bedarkar
9f59b378a3 boot, package: use SPDX short identifier for BSD-3c
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for BSD-3c is BSD-3-Clause.

This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/BSD-3c/BSD-3-Clause/g'

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-04-01 15:26:57 +02:00
Rahul Bedarkar
30a3e8d108 boot, package: use SPDX short identifier for LGPLv2.1/LGPLv2.1+
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for LGPLv2.1/LGPLv2.1+ is LGPL-2.1/LGPL-2.1+.

This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/LGPLv2.1(\+)?/LGPL-2.1\1/g'

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-04-01 15:18:10 +02:00
Rahul Bedarkar
337aa51f3f boot, package: use SPDX short identifier for GPLv3/GPLv3+
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for GPLv3/GPLv3+ is GPL-3.0/GPL-3.0+.

This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/\<GPLv3\>/GPL-3.0/g'

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-04-01 15:17:59 +02:00
Rahul Bedarkar
af31c309e7 boot, linux, package: use SPDX short identifier for GPLv2/GPLv2+
We want to use SPDX identifier for license strings as much as possible.
SPDX short identifier for GPLv2/GPLv2+ is GPL-2.0/GPL-2.0+.

This change is done by using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/\<GPLv2\>/GPL-2.0/g'

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-04-01 15:16:38 +02:00
Jagan Teki
ab1131d559 uboot: improve BR2_TARGET_UBOOT_SPL_NAME help text
SPL is the name used for spl on i.MX6, so update the same on
BR2_TARGET_UBOOT_SPL_NAME help text.

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas: rewrap Config.in help text.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-03-14 23:38:39 +01:00
Fabio Estevam
626aac0d1b boot/uboot: bump to version 2017.03
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-03-14 07:18:15 +01:00
Lionel Flandrin
9ee5978a91 u-boot: add support for full image socfpga mkpimage
On older SoCFPGA SoCs, there was not enough SRAM to fit the entire
U-Boot, so a SPL model was used. The SPL was therefore the binary that
had to be "prepared" to be loaded by the ROM code using the mkpimage
tool.

With newer SoCFPGA SoCs, there is enough SRAM to fit the entire U-Boot,
and therefore the ROM code directly loads U-Boot. In this case, it's the
real U-Boot image (not the SPL) that needs to be prepared using
mkpimage.

This code adds support for the newer SoCFPGA SoCs, by adjusting the
mkpimage related logic to apply on the SPL if an SPL is enabled, or on
the full U-Boot image otherwise.

Signed-off-by: Lionel Flandrin <lionel@svkt.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-03-05 22:28:21 +01:00
Lionel Flandrin
fff0732af0 u-boot: add an option to generate u-boot-dtb.bin
Signed-off-by: Lionel Flandrin <lionel@svkt.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-03-05 22:25:49 +01:00
Fabio Porcedda
e6ca4ed3b9 barebox: bump to version 2017.02.0
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-02-14 20:22:36 +01:00
Rahul Bedarkar
4427fe2821 package: fix reverse dependencies of util-linux
Commit 006a328ad6 ("util-linux: fix build with ncurses") removed
dependency on BR2_USE_WCHAR, but failed to update the reverse
dependencies of util-linux.

This commit fixes all such reverse dependencies by removing dependency
on BR2_USE_WCHAR as it is not required by package itself.

Fixes: 006a328ad6 ("util-linux: fix build with ncurses")
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-01-28 21:02:51 +13:00
Fabio Porcedda
2739c354c9 barebox: bump to version 2017.01.0
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-01-19 13:02:38 +11:00
Fabio Estevam
07f606df6f boot/uboot: bump to version 2017.01
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-01-09 21:14:19 +01:00
Danomi Manchego
f61583fc2e uboot: fix custom patch dir legacy handling
Commit 3e3fef39e7 added new and improved
patch handling, with BR2_TARGET_UBOOT_PATCH.  This was in addition to
the existing BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR option, that only
handled directories.

Later, commit 21b25d28fc moved the old
BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR to legacy options.  But on the way,
bad things happened:

* The original option was a string, while the one added to Config.in.legacy
is a bool.  This results in a warning from defconfigs that actually define
the old BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR (because a string is not a valid
value for a bool), but it does not result in the legacy option being
selected.  Consequently, BR2_LEGACY is not selected either.

* The advice at the top of Config.in.legacy to add a hidden WRAP option
to select BR2_LEGACY was not heeded.

* The advice at the top of Config.in.legacy to use the old string
option as the default for the new string option was not heeded.  In
this case, the variable was not just renamed, as the old option
supported directories only, while the new one supports files too.
But since the old option is a subset of the new option, it can still
be used to set a useful default.

So, this mod turns the legacy option back to a string, adds a hidden
bool WRAP option to set BR2_LEGACY when the string is non emoty, and
uses the legacy option to set the default for the new option.

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-12-20 09:33:48 +01:00
Peter Korsgaard
8852f08eed Merge branch 'next'
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-12-01 22:29:56 +01:00
tiago.brusamarello
bf5487e21e uboot: support -b option for mkenvimage
When generating the environment image the target endianess should
be taken in account for CRC calculation purposes. For big endian
targets the -b flag should be passed to the mkenvimage tool.

Signed-off-by: Tiago Brusamarello <tiago.brusamarello@datacom.ind.br>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-11-30 16:10:30 +01:00
Masahiro Yamada
e550e4783a boot-wrapper-aarch64: update upstream repository
cmarinas/boot-wrapper-aarch64.git does not exist any more.
Switch over to mark/boot-wrapper-aarch64.git.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-11-16 12:24:19 +01:00
Fabio Estevam
ce7b0b8dfb boot/uboot: bump to version 2016.11
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-11-14 22:52:01 +01:00
Yann E. MORIN
2e29db7d97 package/uboot: define help commands when using Kconfig
Expose the Kconfig-related help commands when U-Boot uses the Kconfig
configuration. Like others (like Linux, barebox, busybox), only expose
menuconfig, not all the configurators.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-11-01 14:51:15 +01:00
Hollis Blanchard
ae3bb50a6c boot-wrapper-aarch64: Allow users to select the PSCI SMP boot method
Signed-off-by: Hollis Blanchard <hollis_blanchard@mentor.com>
[Thomas:
 - remove "default n"
 - pass explicit --disable-psci]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-10-25 23:59:36 +02:00
Thomas Petazzoni
02e11d02f4 uboot: add option to optionally depend on host-openssl
Some U-Boot board configurations have CONFIG_FIT_SIGNATURE=y. In this
case, when U-Boot builds its tools, it requires OpenSSL support on the
host system.

Since we clearly don't want to unconditionally depend on host-openssl,
we introduce a new option to explicitly enable the dependency on
host-openssl. This is exactly identical to the existing
BR2_TARGET_UBOOT_NEEDS_DTC, for the dependency on host-dtc. It is
therefore the responsibility of the user to enable this option if his
board configuration uses CONFIG_FIT_SIGNATURE=y.

Necessary to fix bug #9316.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-10-20 23:31:09 +02:00
Yann E. MORIN
fc34cf772c core: introduce per br2-external NAME
This unique NAME is used to construct a per br2-external tree variable,
BR2_EXTERNAL_$(NAME)_PATH, which contains the path to the br2-external
tree.

This variable is available both from Kconfig (set in the Kconfig
snippet) and from the .mk files.

Also, display the NAME and its path as a comment in the menuconfig.

This will ultimately allow us to support multiple br2-external trees at
once, with that NAME (and thus BR2_EXTERNAL_$(NAME)) uniquely defining
which br2-external tree is being used.

The obvious outcome is that BR2_EXTERNAL should now no longer be used to
refer to the files in the br2-external tree; that location is now known
from the BR2_EXTERNAL_$(NAME)_PATH variable instead. This means we no
longer need to expose, and must stop from from exposing BR2_EXTERNAL as
a Kconfig variable.

Finally, this also fixes a latent bug in the pkg-generic infra, where we
would so far always refer to BR2_EXTERNAL (even if not set) to filter
the names of packages (to decide whether they are a bootloader, a
toolchain or a simple package).

Note: since the variables in the Makefile and in Kconfig are named the
same, the one we computed early on in the Makefile will be overridden by
the one in .config when we have it. Thus, even though they are set to
the same raw value, the one from .config is quoted and, being included
later in the Makefile, will take precedence, so we just re-include the
generated Makefile fragment a third time before includeing the
br2-external's Makefiles. That's unfortunate, but there is no easy way
around that as we do want the two variables to be named the same in
Makefile and Kconfig (and we can't ask the user to un-quote that variable
himself either), hence this little dirty triple-inclusion trick.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-10-16 13:01:02 +02:00
Joao Pinto
b5a6299042 arm-trusted-firmware: new package
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
[Thomas:
 - Rename the package from atfirmware to arm-trusted-firmware, in order
   to match upstream.
 - Remove option to apply custom patches. We no longer add such options,
   and use the global patch directory instead.
 - Rename the repo URL/version options, in order to not be Git specific,
   in case support for fetching from other VCS is added later. This is
   consistent with how other bootloaders handle this.
 - Add license information.
 - Do not add a weird dependency on the vexpress-firmware package in
   Config.in. Instead, simply use it if it's available. Of course, some
   configurations (such as the juno configuration) will fail to build if
   vexpress-image is not enabled, but it's the responsibility of the
   user to create a config that builds.
 - Simplify misc aspects in the .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-10-15 14:13:34 +02:00
Joao Pinto
82e84a4f35 vexpress-firmware: new package
This commit adds a new package for the SCP (System Control Processor)
firmware for the ARM reference platforms. There will most likely be
other SCP firmware provided by other vendors, but they might be provided
in a different form, so we for now create a vendor-specific package
named vexpress-firmware.

Since this firmware is used for booting, we create the package in boot/
and not in package/.

The package simply installs a single pre-built binary file into the
images directory.

Signed-off-by: Joao Pinto <jpinto@synopsys.com>
[Thomas:
 - Rename the package from scpfirmware to vexpress-firmware.
 - Add a Config.in prompt for the package.
 - Remove the prompt-less Config.in options to select the Git repo and
   version. Since we only support the Vexpress firmware, there's no need
   for configurability here, so we just use the right Git repo/version
   in the .mk file.
 - Use $(INSTALL) -D to install the firmware file.
 - Add license information.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: add hash file, as suggested by Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-10-15 12:35:28 +02:00
Fabio Estevam
55a481bec1 boot/uboot: Call 'make all' unconditionally
Since commit fad58cefa4 ("boot/uboot: allow to build multiple U-Boot
images") the installation of SPL binary fails.

For example, when building the mx6cubox_defconfig target we see:

  LD      u-boot
  OBJCOPY u-boot-nodtb.bin
  COPY    u-boot.bin
  MKIMAGE u-boot.img
>>> uboot 2016.09.01 Installing to target
>>> uboot 2016.09.01 Installing to images directory
cp -dpf /home/fabio/buildroot/output/build/uboot-2016.09.01/u-boot.bin /home/fabio/buildroot/output/images/
cp -dpf /home/fabio/buildroot/output/build/uboot-2016.09.01/u-boot.img /home/fabio/buildroot/output/images/
cp -dpf /home/fabio/buildroot/output/build/uboot-2016.09.01/SPL /home/fabio/buildroot/output/images/
cp: cannot stat '/home/fabio/buildroot/output/build/uboot-2016.09.01/SPL': No such file or directory

Instead of calling 'make all' only for the BR2_TARGET_UBOOT_FORMAT_DTB_IMG
case, call 'make all' unconditionally so that the SPL target can also
be installed.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-10-07 22:35:48 +02:00
Alexey Brodkin
6a4e0314a4 u-boot: Fix building for ARC700
With newer ARC toolchain obsolete -marcXXX were finally deperecated
and so compiler throws errors now about unknown option.

Solution is as simple as switching to more generic -mcu-XXX
options. Which we do. Unfortunately that change in upstream U-Boot [1]
happened right after v2016.09 was released an so we need to have that fix
for v2016.07 which is mentioned in axs10x defconfigs and for the latest
U-Boot release v2016.09 (which is selected by default if no defconfig is
used).

Once we deprecate either U-Boot version in U-Boot corresponding patch
should be removed essentially.

[1] http://git.denx.de/?p=u-boot.git;a=commit;h=7c8d81605302e7d7fdd3e7d8eb69302bddc64a2c

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: handle the U-Boot bump to 2016.09.01.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-09-25 23:24:27 +02:00
Fabio Estevam
55a7965273 boot/uboot: bump to version 2016.09.01
2016.09.01 is a bugfix release, so bump to this version.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-09-25 23:14:47 +02:00
Biagio Montaruli
3409bcb563 boot/at91bootstrap3: bump to version 3.8.6
Signed-off-by: Biagio Montaruli <biagio.hkr@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-09-23 08:05:57 +02:00
Petr Kulhavy
fad58cefa4 boot/uboot: allow to build multiple U-Boot images
Sometimes it is desired to build multiple U-boot images. E.g. one to
save into flash memory and one for serial load. So far this was not
possible.

This change allows to select any combination of the target formats. They
are all copied to the image folder.

Signed-off-by: Petr Kulhavy <brain@jikos.cz>
[Thomas:
 - Handle the BR2_TARGET_UBOOT_FORMAT_BIN, which wasn't handled, and
   therefore u-boot.bin was not copied when
   BR2_TARGET_UBOOT_FORMAT_BIN=y.
 - Rename UBOOT_BIN to UBOOT_BINS, since it can now contain multiple
   values.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-09-17 19:24:12 +02:00
Fabio Estevam
7f111de1fb boot/uboot: bump to version 2016.09
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-09-12 22:40:15 +02:00
Ryan Coe
f80e50d8a7 syslinux: add patch to disable pie
Ubuntu 16.10 has pie enable by default. This causes a build failure with
syslinux.

https://bugs.launchpad.net/ubuntu/+source/syslinux/+bug/1579023

Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
[Thomas: improve patch description.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-09-12 22:32:47 +02:00
Peter Korsgaard
7353967690 Merge branch 'next'
Quite some conflicts, so here goes ..

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-09-02 16:20:33 +02:00
Raphaël Poggi
6525c6d228 barebox: bump version to 2016.08
Signed-off-by: Raphael Poggi <poggi.raph@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-08-16 12:56:41 +02:00
Raphaël Poggi
bbe71a699a barebox: fix ARCH value for arm64
barebox 2016.08 added arm64 support using ARCH=arm.

[Peter: extend commit message to clarify]
Signed-off-by: Raphael Poggi <poggi.raph@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-08-16 08:05:05 +02:00
Charles Hardin
fc174b7057 grub2: fix build with BR2_STRIP_none
grub2 assumes the strip command will generate output and the output should
always be stripped - so, just use the $(TARGET_CROSS)strip to make sure that
the build succeeds regardless of the buildroot strip configuration.

Signed-off-by: Charles Hardin <ckhardin@exablox.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-07-31 20:19:40 +02:00
Thomas Petazzoni
4770c4ef83 grub2: add patch to fix build with recent gcc versions
This commit backports a patch from upstream grub2 that fixes a build
issue occuring at least with recent gcc versions:

gettext/gettext.c:37:36: error: storage size of 'main_context' isn't known
 static struct grub_gettext_context main_context, secondary_context;

Fixes bug #8991.

Bug reproduced with:

BR2_x86_64=y
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
BR2_GCC_VERSION_6_X=y
BR2_TARGET_GRUB2=y
BR2_TARGET_GRUB2_X86_64_EFI=y
BR2_TARGET_GRUB2_BUILTIN_MODULES="boot linux ext2 fat squash4 part_msdos part_gpt normal efi_gop terminal"

and verified fixed after adding this patch.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-07-25 22:07:05 +02:00
Thomas Petazzoni
238761e390 grub2: rename patch with the proper naming convention
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-07-25 21:58:29 +02:00
Patrick Keroulas
d42ec02282 boot: add ts4800-mbrboot package
This MBR routine is based on TS' original bootloader.  It is loaded by
the bootrom stored in the companion FPGA, and chainloads an executable
located at the beginning of the first non-fs (0xda) partition.

Signed-off-by: Patrick Keroulas <patrick.keroulas@savoirfairelinux.com>
[Thomas:
 - add hash file.
 - install image in INSTALL_IMAGES_CMDS instead of
   INSTALL_TARGET_CMDS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-07-15 23:15:12 +02:00
Fabio Estevam
f0fa2d1890 boot/uboot: bump to version 2016.07
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-07-12 10:48:08 +02:00
Thomas Petazzoni
61c26cc817 boot/uboot: fix missing closing parenthesis
There was a typo in commit
b05ff12b6c ("uboot: install multiple spl
images"), leading to a missing closing parenthesis. This commit fixes
this typo.

Fixes bug #9086

Reported-by: Jebodiah Sensai <dkaplan65@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-07-06 21:06:45 +02:00
Jason Abele
b05ff12b6c uboot: install multiple spl images
For some platforms, there are multiple generated spl images.  Extend
BR2_TARGET_UBOOT_SPL_NAME to allow these multiple images to be installed
after uboot build completes.

For example, the NextThingCo C.H.I.P. uses two binaries from uboot,
spl/sunxi-spl.bin and spl/sunxi-spl-with-ecc.bin.

Signed-off-by: Jason Abele <jason@nextthing.co>
[Maxime:
 - Add foreach loop for general case and mkpimage
 - Use firstword for zynq case]
Signe-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-07-05 17:30:12 +02:00
Thomas Petazzoni
1c2eb2684f boot/uboot: fix build of old U-Boot versions
Since commit 0dca644e44 ("boot/uboot: fix
missing host-openssl for i.MX28 target"), we pass HOSTCFLAGS/HOSTLDFLAGS
in the environment of U-Boot when building. This is needed to allow
U-Boot to find the OpenSSL headers/libraries when they are
needed. Unfortunately, this breaks the build with old U-Boot versions as
the U-Boot Makefiles were not designed to have HOSTCFLAGS passed in,
which causes some important CFLAGS from the U-Boot build system to be
ignored.

As suggested by Arnout, we pass the HOST_CFLAGS inside HOSTCC directly,
which allows to pass the CFLAGS without overriding the internal U-Boot
CFLAGS.

Tested with an old U-Boot (2012.10), and a modern U-Boot in a
configuration that needs OpenSSL.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-07-05 12:06:47 +02:00
Fabio Porcedda
f732e3362e barebox: bump to version 2016.06.0
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-06-23 21:07:17 +02:00
Yann E. MORIN
3222a10869 package/mxs-bootlets: add hash file
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-06-19 21:54:20 +02:00