Fixes
CC dri.lo
/tmp/ccc6IbbW.s: Assembler messages:
/tmp/ccc6IbbW.s:3114: Error: selected processor does not support ARM mode `ldrex r2,[r1]'
/tmp/ccc6IbbW.s:3117: Error: selected processor does not support ARM mode `strexeq r2,r0,[r1]'
/tmp/ccc6IbbW.s:3273: Error: selected processor does not support ARM mode `ldrex r2,[r1]'
/tmp/ccc6IbbW.s:3276: Error: selected processor does not support ARM mode `strexeq r2,r3,[r1]'
/tmp/ccc6IbbW.s:3352: Error: selected processor does not support ARM mode `ldrex r1,[r2]'
/tmp/ccc6IbbW.s:3355: Error: selected processor does not support ARM mode `strexeq r1,r0,[r2]'
/tmp/ccc6IbbW.s:3451: Error: selected processor does not support ARM mode `ldrex r3,[r2]'
/tmp/ccc6IbbW.s:3454: Error: selected processor does not support ARM mode `strexeq r3,ip,[r2]'
/tmp/ccc6IbbW.s:3522: Error: selected processor does not support ARM mode `ldrex r3,[r0]'
/tmp/ccc6IbbW.s:3525: Error: selected processor does not support ARM mode `strexeq r3,r1,[r0]'
Makefile:653: recipe for target 'dri.lo' failed
make[5]: *** [dri.lo] Error 1
make[5]: Leaving directory '/home/buildroot/buildroot/output/build/xserver_xorg-server-1.17.2/hw/xfree86/dri'
using this defconfig
BR2_arm=y
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
[Peter: fix conditional, add comment explaining issue]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
X.org xserver depends on libepoxy for glamor support, which depends on
EGL support. Mesa3d is not the only possible EGL provider therefore
change the dependency check.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes compile error using this defconfig
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_XPROTO_DRI2PROTO=y
drmVersionPtr is referenced not only in hw/xfree86/dri2/dri2.c
but also in hw/xfree86/dri/dri.c.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some old binary blobs drivers, like the NVidia Tegra2/3 blobs, only
implement an old VIDEODRV ABI.
Since VIDEODRV ABIs are not backward compatible [0], lets introduce an
older Xserver version that supports such an old ABI.
[0] http://www.x.org/wiki/XorgModuleABIVersions/
[Thomas:
- rename option BR2_PACKAGE_XSERVER_XORG_SERVER_V_1_14_7 to
BR2_PACKAGE_XSERVER_XORG_SERVER_V_1_14
- add hash file, change provided by Nicolas Serafini.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Support for the Present protocol has been added to, and is mandatory
since version 1.15.
As we're on the verge of adding 1.14.7, we need to make Present a
version-specific dependency.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The upcoming NVidia Tegra2/3 binary blobs only work with a certain
VIDEODRV ABI (namely up to 14), so we must have a way to represent that
ABI so that such packages can not be enabled with a too recent/old ABI.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Only a single entry for now, but we'll add one more in an upcoming
patch, to support old binary-only drivers, like the NVidia Tegra2/3
drivers.
[Thomas:
- rename option from BR2_PACKAGE_XSERVER_XORG_SERVER_V_1_17_1 to
BR2_PACKAGE_XSERVER_XORG_SERVER_V_1_17, since we don't want to
rename the option at each minor release of the X.org server, and
X.org servers with the same major version will not have a different
ABI.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that largefile is mandatory removes package dependencies and
conditionals.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes
../../../glamor/glamor_egl.c:603:25: error: unknown type name 'RRProviderPtr'
RRProviderPtr provider,
^
../../../glamor/glamor_egl.c:650:1: error: unknown type name 'dri3_screen_info_rec'
static dri3_screen_info_rec glamor_dri3_info = {
^
using this defconfig
BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_INIT_NONE=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_NOUVEAU=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_R600=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SVGA=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_I915=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_I965=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_RADEON=y
BR2_PACKAGE_MESA3D_OPENGL_EGL=y
BR2_PACKAGE_MESA3D_OPENGL_ES=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_XSERVER_XORG_SERVER_MODULAR=y
BR2_PACKAGE_XDRIVER_XF86_VIDEO_INTEL=y
RRProviderPtr is defined in dri3/dri3.h, so make sure glamor is enabled only
if dri3 is enabled, too.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If the libdrm package is enabled, the system is built with an udev
provider and MESA3D_DRI_DRIVER is disabled this adds a --disable-libdrm
to configure options, but udev still requires libdrm and results in a
build failure since libdrm include paths aren't filled in (missing drm.h
include error).
So add --enable-libdrm for the udev scenario to counteract the previous
--disable-libdrm.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
xserver_xorg-server needs libdrm only when DRI is enabled, see configure.ac,
line 1280. But since version 1.16.99.901 configure searches for optional libdrm
support in configure.ac, line 2041,
http://cgit.freedesktop.org/xorg/xserver/commit/configure.ac?id=2feda3b6b58f46cef91ea41312aac9021a703777
as well due to libdrm support being enabled by default, but the macro
PKG_CHECK_EXISTS used in line 2041 does not add libdrm-specific CFLAGS to
Makefile causing the build to fail:
In file included from dumb_bo.c:36:0:
/home/br/br7/output/host/usr/i586-buildroot-linux-uclibc/sysroot/usr/include/xf86drm.h:40:17: fatal error: drm.h: No such file or directory
#include <drm.h>
This patch enables libdrm support only when dri support is enabled, which in
turn depends on mesa3d. Since mesa3d selects libdrm already remove that line
from Config.in as well.
Tested using this defconfig
BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_XSERVER_XORG_SERVER_MODULAR=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2015-0255 - Information leak in the XkbSetGeometry request of X servers
http://www.x.org/wiki/Development/Security/Advisory-2015-02-10/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libunwind support was broken for MIPS variants with 32-bit pointers so
we disabled it:
http://lists.busybox.net/pipermail/buildroot/2014-December/114404.html
But now we have a patch to fix that problem so we can enable it again.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2015-0255 - Information leak in the XkbSetGeometry request of X servers
http://www.x.org/wiki/Development/Security/Advisory-2015-02-10/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- remove patches, all were applied upstream
- add support for libglamor, needed by package/x11r7/xdriver_xf86-video-ati
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream removed this configure option back in 2010 (for server 1.8):
http://cgit.freedesktop.org/xorg/xserver/commit/?id=60b6477f6dc005a1b052be8c5
So this hasn't done anything since 759d548e3e (xserver_xorg-server: bump
version).
Don't add any Config.in.legacy for this as it as been broken for so long any
way.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patch 0003 will be extended to fix the blackfin build as well, therefore
it is renamed according to the fixed variable.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libunwind support in xorg-server is not only broken for MIPS64 n32 but
for all MIPS variants with 32-bit pointers. The reason is exactly the
same one. libunwind defines a uint64 variable to store the words. Then,
xorg-server casts that variable (64-bit) into a pointer (32-bit), and
the compilation fails:
backtrace.c:98:13: error: cast to pointer from integer of different size
[-Werror=int-to-pointer-cast]
Related:
https://bugs.freedesktop.org/show_bug.cgi?id=79939
Fixes:
http://autobuild.buildroot.net/results/87b/87be2c95957f9925c1258812e536df72689fc5da/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Amend the former commit and disable xorg-server with libunwind support
only for MIPS64 n32, as stated in the bug report:
https://bugs.freedesktop.org/show_bug.cgi?id=79939
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While libpciaccess is part of the X libraries, it does not
depend upon X11 or any other X library.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove --localstatedir=/var from all autotools packages where it is no longer
needed.
Also remove --localstatedir=/var/lib/dhcp from package dhcp. localstatedir is
used by dhcp to set the default directory for the leases files. This can also
be done by setting --with-*-lease-file=/var/lib/dhcp/*, which is done in
dhcp.mk.
A custom --localstatedir is left in:
* proftpd.mk
* mysql.mk
This is safe to do:
One of the good thing with autoconf is that if you pass:
--localstatedir=/var ... --localstatedir=/var/something
Then /var/something will be used. So, we can set --localstatedir=/var
by default in the infrastructure, and still have certain packages doing
weird things override it. [Thanks to Thomas Petazzoni]
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make sure that xlib_libXcomposite is build before xserver_xorg-server.
With this defconfig
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_XSERVER_XORG_SERVER_MODULAR=y
BR2_PACKAGE_XLIB_LIBXCOMPOSITE=y
and "make xserver_xorg-server" the package xlib_libXcomposite was ignored.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes
mipushpxl.c: In function 'miPushPixels':
mipushpxl.c:110:38: error: 'IMAGE_BYTE_ORDER' undeclared (first use in this function)
if (screenInfo.bitmapBitOrder == IMAGE_BYTE_ORDER)
Patch submitted upstream: https://bugs.freedesktop.org/show_bug.cgi?id=83582
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version bump includes bumping version
xlib_libXfont to 1.4.99.901 & xproto_fontsproto to 2.1.3.
xserver_xorg-server 1.16.0 depends on them, but they are incompatible
with older versions of xserver_xorg-server, for details and libXfont-related
CVE´s see http://lists.x.org/archives/xorg-announce/2014-July/002453.html
Also remove patches applied upstream.
Since a different patch than xserver_xorg-server-100-mips.patch
was committed upstream:
http://cgit.freedesktop.org/xorg/xserver/commit/?id=19e5a13970ad9d440c0789395e94931429ef4fbb
I also compile tested using this defconfig:
BR2_mips64=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_OPENGL_EGL=y
BR2_PACKAGE_MESA3D_OPENGL_ES=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_XSERVER_XORG_SERVER_MODULAR=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is no longer needed now that e244eb12d (xserver_xorg-server: Fix race
condition when installing man pages) has been reverted.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
