ffmpeg currently uses BR2_GCC_TARGET_TUNE as the --cpu option
value. However, there are multiple architectures for which
BR2_GCC_TARGET_TUNE is not used. After inspecting the ffmpeg configure
script, we concluded that using the BR2_GCC_TARGET_CPU value if
available, or the BR2_GCC_TARGET_ARCH value as a fallback was the
appropriate behavior.
This allows to remove the reference to BR2_GCC_TARGET_TUNE, which is
one step towards the removal of this option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On ARM, we were defining both the CPU type and the architecture
variant. However, depending on the version of gcc, a given combination
of (CPU, architecture) may not be the same. Since the architecture
variant is implied by the CPU type, given the former is not necessary,
and we can simply specify the latter.
>From the gcc documentation:
This specifies the name of the target ARM processor. GCC uses this
name to derive the name of the target ARM architecture (as if
specified by -march) and the ARM processor type for which to tune
for performance (as if specified by -mtune). Where this option is
used in conjunction with -march or -mtune, those options take
precedence over the appropriate part of this option.
Note that we verified that for all BR2_GCC_TARGET_ARCH value that
existed, a proper BR2_GCC_TARGET_CPU value is defined.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 88cf3bb917
("arch/Config.in.arm: Use armv6k for arm1136jf-s rev1"), Benoît
Thébaudeau added separate options for the revision 0 and revision 1 of
the ARM1136JF-S processor, so that different -march values could be
used (armv6j for revision 0, armv6k for revision 1).
However, this is preventing the removal of the BR2_GCC_TARGET_ARCH
option, which we need to do to give only the CPU type to gcc, and let
it decide the architecture variant that matches. This is because this
story of revision 0 vs. revision 1 is the only case where -mcpu
doesn't fully define the CPU.
Moreover, a quick test with gcc shows that -march=armv6j
-mcpu=arm1136jf-s is accepted, while -march=armv6k -mcpu=arm1136jf-s
makes gcc complain: " warning: switch -mcpu=arm1136jf-s conflicts with
-march=armv6k switch".
In addition, gcc 5 will apparently no longer allow to pass all of
--with-arch, --with-cpu and --with-tune, so we will anyway have to
rely only on one of them.
As a consequence, this commit basically reverts
88cf3bb917 and provides only one option
for ARM1136JF-S. If the two revisions are really different, then they
should be supported in upstream gcc with different -mcpu values.
Note that the removal of the two options should not break existing
full .config, since the hidden option BR2_arm1136jf_s becomes again a
visible option to select the CPU.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
dhcpcd is using $(BR2_GCC_TARGET_ARCH) as the value of its --target
option. However, depending on the architecture, this value might be
empty.
After inspecting the dhcpcd configure script, it turns out that in
fact the --target option has the following semantic:
--target=TARGET configure for building compilers for TARGET [HOST]
So it is very much like the --target option of regular,
autoconf-based, configure scripts. Since dhcpcd is not a compiler,
passing --target is pointless. Moreover, as long as --os=linux is
passed, passing --host or --target is completely ignored by the
configure script.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Refactor the toolchain-external Config.in file to use the
BR2_ARM_CPU_ARM*. All of the changes are purely mechanical, except for
the Arago ARMv5 toolchain: it had a 'depends on BR2_GCC_TARGET_ARCH !=
"armv5t"', but armv5t was not a possible value for
BR2_GCC_TARGET_ARCH. Since the toolchain is ARMv5TE, the only ARM
architectures we need to exclude are ARMv4 and ARMv4T.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The libnspr --enable-thumb2 option was only enabled on Cortex-A8 and
Cortex-A9. This commit switches to using BR2_ARM_CPU_ARMV7A instead,
which will allow using Thumb2 for this package even with the other
Cortex-A cores.
[Peter: use BR2_ARM_CPU_HAS_THUMB2 instead]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Instead of using the exhaustive list of Cortex-A ARM cores, use
BR2_ARM_CPU_ARMV7A instead. We also fix a wrong comment that said the
Valgrind package could only be selected for Cortex-A8 and Cortex-A9,
which was true a long time ago, but was no longer true since it was
also enabled for all the other Cortex-A platforms.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The webkit package is not available on ARM < v5, so this commit
switches to using the newly introduced BR2_ARM_CPU_ARM* options
instead of per ARM core options.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The vo-aacenc package has an option to enable ARMv5 optimizations. It
was enabled based on per ARM core options, but now that we have per
ARM architecture options, this commit switches to using them.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adjust the nodejs Config.in dependencies to use the per ARM
architecture BR2_ARM_CPU_ARM* options instead of the per ARM core
options.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adjust the nettle package to use the BR2_ARM_CPU_ARM* option to
disable the usage of assembly code on ARMv4 and ARMv5.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Contrary to the ffmpeg package, the gst1-libav package was only
allowing ARMv6 optimizations on ARMv6 platforms. This commit also
allows ARMv6 optimizations on ARMv7 platforms, like the ffmpeg package
does.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Instead of using the Config.in options for each individual ARM core,
use the newly introduced BR2_ARM_CPU_ARM* options, which exist per ARM
architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
--disable-dependency-tracking was added globally to
package/pkg-autotools.mk by this commit:
http://git.buildroot.net/buildroot/commit/?id=3e37b0fc6cbbe2245e39fedb247a381fb4e0d992
This causes a failure in webkit because some source files are generated
after the Makefile is created. To fix this, we add
--enable-dependency-tracking to the configure options.
Fixes:
http://autobuild.buildroot.net/results/5beea967b02df202bca1d42afd6fa8c2c13383d5/
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2014-3707 - libcurl's function curl_easy_duphandle() has a bug that
can lead to libcurl eventually sending off sensitive data that was not
intended for sending.
Removed patch that was upstream and now in the release.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The adwaita icon theme can only be selected with libgtk3 and depends on
host-libgtk3 to build.
Fixes http://autobuild.buildroot.org/results/f8d/f8d0e2198fa54f9141512e2db6dc46e3cee1cd44/
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
qextserialport builds fine with both Qt4 and Qt5, so this commit
enables it for Qt5.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 18714011b2 ("qjson: bump
version"), qjson can be built either against Qt4 or Qt5. This commit
therefore allows this package to be selected when Qt5 is enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Much like package/qt/qt.mk exposes a QT_QMAKE variable that other
qmake-based Qt4 libraries/applications can use in their .mk file, this
commit adds a QT5_QMAKE variable to allow the same for Qt5 packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, all the Qt external modules (qtuio, qjson, etc.) can only
be compiled against Qt4. However, some of them (qjson, qextserialport
at least) can compile with either Qt4 or Qt5.
Therefore, this commit adjusts the Config.in logic to make it possible
for certain modules to be selected with either Qt4 or Qt5. We use the
same approach as the one of for Python 2 vs. Python 3 modules:
- in package/Config.in, the package Config.in files are included
either if BR2_PACKAGE_QT or BR2_PACKAGE_QT5 are enabled.
- each individual package is then responsible for having a dependency
on either BR2_PACKAGE_QT, or BR2_PACKAGE_QT5 or both depending on
what they support. In this commit, we add a dependency on
BR2_PACKAGE_QT to all packages, since for now, they only support
Qt4.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
qt5base is (as the name hints) the basics of anything related to qt5, so
enabling qt5 without enabling qt5base doesn't make any sense as nothing will
get built.
Selecting it here also simplifies the upcoming series to add qt5 support to
external qt modules.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes http://autobuild.buildroot.net/results/f53/f53d4d47a6b65c40c1b122dfad61d9164e533bf0/
Actually only the linux-user code needs it, but with the _CUSTOM_TARGETS
option it is difficult to ensure it only for userland emulation, so just add
it to the main qemu option.
At the same time add the missing wchar/mmu dependencies to the comment.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes http://autobuild.buildroot.net/results/445/4456e49a6c33a80570b4f59ec9799a8d4a314af1/
The orc configure script doesn't recognize uclinux, so builds using
BR2_BINFMT_FLAT fails. While this could be patched, orc doesn't have any
acceleration for blackfin and orc isn't a hard dependency of any other
package, so just disable it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add and use the "UNZIP" variable instead of calling directly unzip
because the variable contains the "-q" option to silence "unzip" so it
doesn't show the list of files extracted just like when tar files are
being unpacked.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Synopsys has recently announced its new ARC HS38 core that is capable of
running Linux -
http://www.synopsys.com/dw/ipdir.php?ds=arc-hs38-processor
ARC HS38 is based on ARCv2 ISA and requires special settings of gcc and
libc.
Also in case of HS38 atomic extensions (LLOCK/SCOND instructions) are
built-in by default, so enabling atomic extensions in Buildroot as well.
This commit adds support of the core in buildroot.
[Peter: string type, so must be in quotes as noted by Yann]
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Anton Kolesov <anton.kolesov@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As with other architectures for ARC we need to have an ability to set
specific options in uClibc.
In particular this is required for selection of ARC ISA version.
[Peter: string type, so must be in quotes as noted by Yann]
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This separation allows to specify unique options and features for each
CPU.
For example ARC 770D has LLOCK/SCOND instructions built-in by default.
Also this new scheme simplifies selection of proper configuration for
users - preconfigured options now match templates for ARC CPUs.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also add a hash file. Upstream provides md5 only, so add a locally generated
sha256.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
