Based on commit c17af71d2c (package/audit: not available for musl) add a
comment that explains why audit is disabled for musl.
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Programs are released under GPLv2+. README file says libraries
libaudit.* and libauparse.* are released under LGPL but there are two
files auparse/strsplit.c and lib/strsplit.c which are released under
GPLv2+ which makes both libraries GPL. Until we review situation with
upstream, we simply mention "unclear (libraries)".
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
[Thomas: add "unclear (libraries)" as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit upstream 51925b7dd6d0("package/audit: Bump to version 2.6.5")
removed patch 0002 as part of version bump. But forgot to disable
autoreconf.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
host-libsemanage requires host-audit to compile, therefore this patch
adds a host variant for the audit package.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[Thomas: remove libcap-ng usage for now, rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Removed 0001-lib-gen_tables.c-define-EHWPOISON-when-not-available.patch
as this was applied upstream.
- Removed 0002-Fix-usage-of-audit_status.feature_bitmap.patch as this was
applied upstream.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Following the removal of eglibc support, this commit replaces all
occurences of "(e)glibc" by just "glibc". Most of the occurences are in
package Config.in comments.
In addition, when the form "an (e)glibc ..." was used, it is replaced by
"a glibc ...".
[Peter: add new efi* packages, s/uclibc/uClibc as suggested by Romain,
systemd / liquid-dsp tweaks as suggested by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
install -D creates the folder, so we don't need the mkdir command
Signed-off-by: Nathaniel Roach <nroach44@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The main .service file is installed by audit.
We are using tmpfiles mechanisms to create the log directory, which
would not exists otherwise since /var/log points to /tmp
[Thomas: add explicit --disable-systemd when systemd is not used.]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove patch as it was merged in this release:
https://fedorahosted.org/audit/changeset/1117
[Thomas: remove autoreconf, no longer needed.]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
'echo -n' is not a POSIX construct (no flag support), we shoud use
'printf', especially in init script.
This patch was generated by the following command line:
git grep -l 'echo -n' -- `git ls-files | grep -v 'patch'` | xargs sed -i 's/echo -n/printf/'
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The recommended form is without the trailing slash, and will become
mandatory in a coming commit.
This avoids the need for the $$($(2)_SITE:/=) magic in package/pkg-generic.mk
to avoid double slashes in download URLs, like
"https://mosh.mit.edu//mosh-1.2.5.tar.gz".
^^
Note: this work has already been done in b0b9606530 a few
months ago and earlier in c7f4b96471 and 4a9eb20de8,
but no check has been added at that time to avoid new slashes to slip
in, and so they did. This time a patch will follow immediately to
prevent future mistakes from being unnoticed.
Mass-replaced with the following command:
git grep -l '_SITE.*/$' | xargs sed -i '/_SITE.*=/s|/$||'
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
audit uses strndupa() which is missing from musl.
Even though the implementation of strndupa is not too complex, we won't
go as far as duplicating it in audit, and we just disable audit for the
musl C library.
Fixes;
http://autobuild.buildroot.org/results/e22/e22a70f9ff14bc52f642a6135da44c14e41b6cbb/http://autobuild.buildroot.org/results/233/2333c9b3d8f81b15602263b918d422e440f09d60/
...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Cc: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
audit uses -fPIE/-pie, which is not compatible with static only builds
with uClibc. Since using audit in a statically linked environment is
probably not a very common use case, let's simply mark it as
non-available in such situations.
Fixes:
http://autobuild.buildroot.net/results/549492270f3f43747a96a8326aef1d7ae1d3b213/
Thanks to Waldemar for explaining the source of the problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the version bump to 2.4.3, python3 support was added for
libaudit. With host machines that have python3 installed, this will
cause build issues such as:
make[5]: Entering directory `/tmp/ryan/buildroot/output/build/audit-2.4.3/bindings/swig/python3'
swig -o audit_wrap.c -python -py3 -modern -I. -I../../.. -I../../../lib -I/usr/include/python3.4m -I/usr/include/python3.4m ./../src/auditswig.i
make[5]: swig: Command not found
Solution is to disable python3 support such as we do with python2.7.
Signed-off-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bumping from version 2.4.1 to 2.4.3 to drop patches that have been
picked up by the mainline.
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The startup script for the audit package did not meet the buildroot
standards when the package was initially merged. Adding a compliant
startup script for starting the audit daemon along with rotating the
logs and other features.
[Thomas:
- Replace "Failed" by "FAIL" to be consistent with the rest of the
init script and other packages
- Use $(INSTALL) -D with a complete destination path to avoid having
to create /etc/init.d before installing the init script.]
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After working with the audit maintainers to get patches accepted, the
following one had to be reworked to meet their standards. This patch
will be included in the next version of audit.
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- remove S01audit, which isn't completely compliant with the
Buildroot style.
- make the package available only on architectures for which the
system call tables are available, and add some comments about this
in the .mk file.]
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
