Add initial support for Orangepi Zero3 board:
- U-Boot 2021.07 fork by Orangepi
- Linux 6.1.31 fork by Orangepi
- Default packages from buildroot
Enable CONFIG_MFD_AC200 as it is used directly by other module,
resulting in build failure when disabled.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Tested-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for Bananapi M2 Berry board based on the Allwinner V40/A40i
SoC.
- U-Boot 2023.07
- Linux 6.1.38
Board specifications: https://wiki.banana-pi.org/Banana_Pi_BPI-M2_Berry
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Enable OpenSSL to build U-boot. Reported by the daily autobuild.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/5083367140
Signed-off-by: Roberto Medina <robertoxmed@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Backport an upstream patch fixing the build with binutils >= 2.38
for riscv's for Zicsr and Zifencei.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4987456149
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for PineCube with:
- U-Boot 2022.04
- Linux 5.15.61
PineCube is a low-powered, open source IP camera
with the following specs:
- Allwinner S3 Cortex-A7
- 128 MiB DDR3
- 16 MiB SPI flash
- 5 MPx OV5640 camera
- MicroSD slot
- 10/100M Ethernet with passive PoE
- 802.11 b/g/n WiFi
- Bluetooth 4.1
- USB 2.0
- 26 pins GPIO header
- Microphone
- IR LEDs for night vision
Board homepage: https://www.pine64.org/cube/
Board wiki: https://wiki.pine64.org/wiki/PineCube
Signed-off-by: Jan Havran <havran.jan@email.cz>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While switching ATF to github, the BR2_TARGET_UBOOT_CUSTOM_GIT=y
symbol was not removed. Since then this defconfig fail to build
in gitlab-ci due to invalid defconfig check.
WARN: defconfig ./configs/freescale_imx6qsabresd_defconfig can't be used:
Missing: BR2_TARGET_UBOOT_CUSTOM_GIT=y
[1] dd42b159a5
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4889436612
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
uboot needs Python libfdt to build:
pylibfdt does not seem to be available with python3
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4839060137
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump qemu_arm_ebbr_defconfig and qemu_aarch64_ebbr_defconfig in sync:
- Bump Linux to v6.4.3
- Bump U-Boot to 2023.07.02
- Bump TF-A to v2.9
While at it, tune the documentation:
- Increase the amount of memory in the example commands to help run the
largest OS distributions.
- Update the link to the IR Guide to point at the latest version.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is needed to auto-load some kernel modules needed for the HW to
work.
Signed-off-by: Javad Rahimi <javad321javad@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As of upstream commit cbd91e89e4
we can use the default BR2_riscv_g to select IMAFD extensions and
still be able to enable additional extensions, such as the C extension
in our cse.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
All defconfigs were runtime tested in Qemu 8.0.3.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Let's select the RVA option as Andes 45-series CPUs support IMAFDC
extensions.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adds support for TI's SK-AM62 board by introducing the
am62x_sk_defconfig file and related support files.
More information about the board can be found at:
https://www.ti.com/tool/SK-AM62
Signed-off-by: Xuanhao Shi <x-shi@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adds support for TI's SK-AM64 board by introducing the
ti_am64x_sk_defconfig file and related support files.
More information about the board can be found at:
https://www.ti.com/tool/SK-AM64
Signed-off-by: Xuanhao Shi <x-shi@ti.com>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Acked-by: Andrew Davis <afd@ti.com>
Tested-by: Bryan Brattlof <bb@ti.com>
Cc: Romain Naour <romain.naour@gmail.com>
Reviewed-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the RISCV_ISA_RVC config option to match updated RISCV kconfig
instruction set options.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This new binutils version break the ATF build due to new linker warnings:
ld.bfd: warning: bl2.elf has a LOAD segment with RWX permissions
From [1]
"Users of GNU ld (BPF) from binutils 2.39+ will observe multiple instaces
of a new warning when linking the bl*.elf in the form:
ld.bfd: warning: stm32mp1_helper.o: missing .note.GNU-stack section implies executable stack
ld.bfd: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
ld.bfd: warning: bl2.elf has a LOAD segment with RWX permissions
ld.bfd: warning: bl32.elf has a LOAD segment with RWX permissions
These new warnings are enbaled by default to secure elf binaries:
- https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ba951afb99912da01a6e8434126b8fac7aa75107
- https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=0d38576a34ec64a1b4500c9277a8e9d0f07e6774
"
Bump the ATF custom version to 2.9 for binutils 2.39+ support.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4889436283
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump the kernel to the latest release of 5.4 kernel series
to fix an issue with gcc 12.
arch/mips/jz4740/setup.c: In function 'plat_mem_setup':
arch/mips/jz4740/setup.c:64:25: error: comparison between two arrays [-Werror=array-compare]
64 | if (__dtb_start != __dtb_end)
| ^~
arch/mips/jz4740/setup.c:64:25: note: use '&__dtb_start[0] != &__dtb_end[0]' to compare the addresses
CC fs/debugfs/file.o
cc1: all warnings being treated as errors
Fixed in v5.4.195:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=a60def7568216684f62b117c199429c4a9a89570
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4889436573
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
objtool built by the kernel requires libelf
ldd output/build/linux-6.1.24/tools/objtool/objtool
linux-vdso.so.1
libelf.so.1 => output/host/lib/libelf.so.1
While updating the kernel [1] we forgot to select
BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF to provide Buildroot's host-libelf.
Using host-libelf avoid linking with libelf installed on the host or
failing to build objtool if libelf is not installed.
[1] d45538f2e7
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4889436869https://gitlab.com/buildroot.org/buildroot/-/jobs/4889436872
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch introduces patches for the custom kernel, as it is
currently used for the Radxa Rock 5B. The patches fix two gcc
compiler warnings, which result in a build error, if the kernel
is used with gcc version 12.
Since also the code of custom board drivers for WiFi support is
affected, and no fixes are provided by the vendor, the custom WiFi
support is disabled.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update the instruction sets for MPFS icicle kit to mirror the
configuration update, i.e. It is now classed as a RISC-V G core with
support for C, IMAFDC.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The generic extension set 'G' is realy a base with the minimal set of
extensions needed to be comfortable (but not required) to run a
linux-bassed system. Similarly, we consider the custom to be about the
custom set of features (not about a custom core implementing such a
set).
As such, we allow that a core with the G set can have futher extensions
without requiring it to be configured as a custom set.
We drop the intermediate symbols with the prompts, and move the prompts
to the previously hidden symbols, and add a prompt for the I set.
This alows one to clearly see what the generic set is about, without
having to delve into the help and hunt the list of selected symbol.
Note however that the G set implies Zicsr and Zifencei, but we have no
prompt for thos two, because in Buildroot, we assume that they are
mandatory and always present, like the I set (which they previously were
part of).
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
[yann.morin.1998@free.fr:
- drop the intermediate symbols
- move prompt to previously hidden symbols
- add symbol for I
- update defconfigs
- reword the commit log accordingly
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Don't specify the ARCH_FLAGS of U-Boot, so both extensions can be
appended to -march when building w/ gcc-12.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/4839059655
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The issue seems to be fixed. I checked qemu and linux git repositories
but can not find any information when this is starting to work.
System gets successfully an IP, no further testing was done.
Tested with Qemu 8.0.3 and Linux 6.1.x.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a new defconfig for OrangePI PC2 board.
It was supported before in Buildroot, however due to problems in
building TF-A, it was removed in commit
eeede611f8. This commit re-adds it, in a
state that properly builds.
Signed-off-by: Javad Rahimi <javad321javad@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add defconfig for imxrt1050-evk is a development board from NXP.
The i.MXRTxxxx family spreads from i.MXRT1020 to i.MXRT1170 with the
first one supporting 1 USB OTG & 100M ethernet with a cortex-M7@500Mhz
up to the latter with i.MXRT1170 with cortex-M7@1Ghz and
cortex-M4@400Mhz, 2MB of internal SRAM, 2D GPU, 2x 1Gb and 1x 100Mb
ENET. The i.MXRT family is NXP's answer to STM32F7xx, as it uses only
simple SDRAM, it gives the chance of a 4 or less layer PCBs. Seeing
that these chips are comparable to the STM32F7xxs which have Buildroot
ported to them it seems reasonable to add support for them.
https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/i-mx-rt1050-evaluation-kit:MIMXRT1050-EVK
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for the icicle kit, the main development board for
Microchip's PolarFire SoC.
The configuration file is microchip_mpfs_icicle_defconfig. It builds a
bootable kernel image with an embedded root file system. The image
built can be flashed to the board using the eMMC or an SD card.
The yaml configuration file is used by the hss payload generator. It
maps the ELF binaries or binary blobs to the individual application
harts (U54s).
The image generator script sets the partitions of the image.
The kernel fragment file sets additional configurations for the icicle
kit in buildroot that are not in the default configuration.
The image tree souce file creates a FIT image.
The post image script creates the payload using the payload generator
host package and finally, creates the FIT image using the ITS after the
kernel build.
The U-Boot script and additional U-Boot configurations ensure that
U-Boot behaves as expected for the icicle kit and boots the FIT image.
The readme.txt file documents how to build and boot the icicle kit with
this configuration.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit duplicates the asus_tinker_rk3288_defconfig changing:
- BR2_LINUX_KERNEL_INTREE_DTS_NAME to rk3288-tinker-s
- BR2_TARGET_UBOOT_BOARD_DEFCONFIG to tinker-s-rk3288
- extlinux.conf devicetree to /boot/rk3288-tinker-s.dtb
- root device format to <major>:<minor> in order to prevent the kernel to mount rootfs
from the wrong device
- Add Flávio Tapajós for configs/asus_tinker-s_rk3288_defconfig and for
configs/asus_tinker-s_rk3288_defconfig and for board/asus/tinker-s
Signed-off-by: Flávio Tapajós <flavio.tapajos@newtesc.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps the versal_vck190_defconfig to xilinx-v2023.1 which includes
the following updates:
- Linux v6.1.5
- U-Boot v2023.01
- TF-A v2.8 (including mainline patches)
- PLM xilinx_v2023.1
- PSMFW xilinx_v2023.1
- versal-firmware uses new github.com/Xilinx/soc-prebuilt-firmware repo
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The m68k Linux kernel build is broken with binutils >= 2.41 with:
arch/m68k/fpsp040/skeleton.S: Assembler messages:
arch/m68k/fpsp040/skeleton.S:502: Error: junk at end of line, first unrecognized character is `#'
arch/m68k/fpsp040/skeleton.S:508: Error: junk at end of line, first unrecognized character is `#'
This commit adds a backport from the upstream Linux kernel which fixes
this issue. Many thanks to Romain Naour for the issue investigation
and the identification of the kernel commit fixing this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- improve 8ULP support (rev A1)
- add mmc user fastboot support
- add fastboot partconf support
- add nitrogen8mp smarc support
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add ARC700 image configuration for nSIM instruction set simulator.
This is a nice starting point for ARC700 in nSIM.
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps the zynqmp defconfigs to xilinx-v2023.1 which includes
the following updates:
- Linux v6.1.5
- U-Boot v2023.01
- ATF v2.8 (including mainline buildroot patches)
- PMUFW xilinx_v2023.1
- Updated pm_cfg_obj.c from Vitis v2023.1
- Removed kria u-boot patch which is included with xilinx-v2023.1
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Buildroot 2022.05 use binutils 2.37 by default, but the binutils
version was downgraded to the previous binutils version in qemu_ppc64*
defconfigs due to a bug in binutils 2.37 [1].
Later when binutils 2.36 has been removed the binutils version has
been updated to 2.38 (even though it was already the default version
selected by Buildroot at that time) [2].
Since then, several binutils release has been added and the binutils
version 2.38 has been removed recently [3].
Since the initial bug is gone with the removal of binutils 2.37,
we can safely remove the binutils version from qemu_ppc64 defconfigs.
[1] 1e2fe860f3
[2] e461c9adc8
[3] 1391c99d62
Fixes:
https://gitlab.com/buildroot.org/toolchains-builder/-/jobs/4798047373
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Cédric Le Goater <clg@kaod.org>
Cc: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Kernel is built without network support, so network utils are useless.
This has a positive impact on the size of busybox and xipImage, making
them smaller.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiegineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since gcc 11 [1] the sparc architecture is disabled since
it produce a non working image. Buildroot now provide gcc
13.x, 12.x and 11.x and we are going to remove gcc 10
that was the last working release (thanks to a local patch).
First remove qemu_sparc_ss10_defconfig since it will no longer
be possible to build it with the internal toolchain backend.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds the defconfig file needed to build u-boot, kernel
and rootfs for the Rock 5B. In addition it adds a kernel config
fragment file, which activates the needed ethernet driver support.
It also adds a readme and post image scripts, needed to generate an
sdcard.img file, which can be flashed on an SD card to boot the
Radxa Rock 5B.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
[yann.morin.1998@free.fr:
- drop custom version
- fix shellcheck in post-image script
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The u-boot.stm32 image is now created by binman tool, so the
BR2_TARGET_UBOOT_BUILD_FORMAT_STM32_LEGACY configuration needs to be
disabled, but pylibfdt is now needed.
Tested on stm32mp157f_dk2.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As reported in commit [1] of the U-Boot project, the config.mk file has
been suppressed in order to use binman to manage FIT
generation. Therefore, the "u-boot.stm32" make target should no longer
be used with recent versions of U-Boot.
The configuration option added by this comit allows the creation of
the u-boot.stm32 image for both recent versions of U-Boot, which use
binman, and older versions.
Legacy handling would have suggested that this new option should
"default y" to preserve existing behavior, but as moving forward all
U-Boot new versions will no longer need this u-boot.stm32 target, it
probably makes sense here to not comply with this backward
compatibility rule, as an exception.
[1] 5564b4cd4d5c69 ("stm32mp: add binman support for STM32MP15x")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Tested-by: David Reaver <me@davidreaver.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Build the am335x-bonegreen-wireless.dtb device tree.
The genimage script which is shared between beaglebone and
beaglebone_qt5 was updated to support the bonegreen-wireless.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Regression builds failed to build uboot due to missing OpenSSL
library.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes uboot build errors:
In file included from tools/imagetool.h:24,
from tools/aisimage.c:7:
include/image.h:1383:12: fatal error: openssl/evp.h: No such file or directory
1383 | # include <openssl/evp.h>
|
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BR2_RISCV_ISA_CUSTOM_RVA is currently not explicitly listed as it is
selected by BR2_riscv_custom. This looks confusing. Let's enable it.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
BR2_RISCV_ISA_CUSTOM_RVA is currently not explicitly listed as it is
selected by BR2_riscv_custom. This looks confusing. Let's enable it.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
With upstream commit ae2d9506a36c ("riscv: sifive: Rename fu540 board to unleashed")
in U-Boot v2021.07 release, the defconfig for SiFive Unleashed board
has been changed to sifive_unleashed_defconfig.
Also newer U-Boot has deprecated the usage of SPL_FIT_GENERATOR
to generate u-boot.itb hence there is no 'u-boot.itb' target in
the U-Boot Makefile anymore. Instead binman is used to assemble
the u-boot.itb image.
We will need to switch to BR2_TARGET_UBOOT_FORMAT_CUSTOM for
installing u-boot.itb.
Switch over to use the latest U-Boot v2023.04 release.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since the rest of RISC-V boards have been switched to use OpenSBI
1.2, let's update hifive_unleashed to use OpenSBI 1.2 too.
Resolves: https://bugs.busybox.net/show_bug.cgi?id=15658
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Select BR2_TARGET_UBOOT_NEEDS_OPENSSL to fix the following
build error:
include/image.h:1383:12: fatal error: openssl/evp.h: No such file or directory
Reported-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The default kernel configuration for s390x enable a lot of
drivers by default so increase the image site to 120M.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4364600444
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ppc-mpc8544ds is the only qemu configuration that requires a kernel patch:
board/qemu/ppc-mpc8544ds/patches/linux/0001-powerpc-Fix-mcpu-options-for-SPE-only-compiler.patch
But this patch doesn't apply after a backport between v6.1.20 and v6.1.21
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=da0beae2449376326086e9f57468fd2b64736d2a
So the patch 0001-powerpc-Fix-mcpu-options-for-SPE-only-compiler.patch doesn't
seem required anymore.
Welcome to Buildroot
buildroot login: root
# uname -a
Linux buildroot 6.1.28 #1 Wed May 24 09:08:27 UTC 2023 ppc GNU/Linux
# cat /proc/cpuinfo
processor : 0
cpu : e500v2
clock : 400.000000MHz
revision : 3.0 (pvr 8021 0030)
bogomips : 800.00
timebase : 400000000
platform : MPC8544 DS
model : MPC8544DS
Memory : 128 MB
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4306895282https://bugs.busybox.net/show_bug.cgi?id=15581
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Cc: Sebastian Weyer <sebastian.weyer@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch bumps the zynq_zed_defconfig to xilinx-v2023.1 which includes
the following updates:
- Linux v6.1.5
- U-Boot v2023.01
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynq_microzed_defconfig to xilinx-v2023.1 which includes
the following updates:
- Linux v6.1.5
- U-Boot v2023.01
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynq_zc706_defconfig to xilinx-v2023.1 which includes
the following updates:
- Linux v6.1.5
- U-Boot v2023.01
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Board support package includes the following components:
- mainline Linux kernel 5.15.108
- mainline U-Boot 2023.04
- default packages from buildroot
Note: There is a problem in u-boot display management. It should display
the ST microelectronics logo but "noise" is displayed (like when running
the command dd if=/dev/urandom of=/dev/fb0 in Linux). I also tried to
change version (even the first version in which this feature was
introduced), but without success. Despite this I decided not to disable
the video management configuration to remind us that it needs to be
fixed :).
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Link: https://www.st.com/en/evaluation-tools/32f769idiscovery.html
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump U-Boot to version 2023.04.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Kernel is built without network support. It is useless to compile the
package and then remove it from rootfs.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The versal vc1902 on the vck190 evaluation board has an ARM Cortex A72 core.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Package optee-benchmark is no more maintained by OP-TEE community
hence don't enable that package in qemu_arm_vexpress_tz_defconfig.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Building U-Boot for OrangePi PC Plus requires host OpenSSL.
Build error is masked only because Linux kernel is built
before U-Boot for this specific image configuration were
wireless driver is enabled.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Building U-Boot for OrangePi Zero requires host OpenSSL.
Build error is masked only because Linux kernel is built
before U-Boot for this specific image configuration were
wireless driver is enabled.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Building U-Boot for OrangePi One now requires host OpenSSL. Select
BR2_TARGET_UBOOT_NEEDS_OPENSSL to fix the following build error:
include/image.h:1383:12: fatal error: openssl/evp.h: No such file or directory
1383 | # include <openssl/evp.h>
| ^~~~~~~~~~~~~~~
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4187707115
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
After booting Linux the userspace is unusable since every command issued,
that is a symlink to busybox, fails because of no free ram. So let's
disable IIO in linux.config to give some more ram to userspace.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump Linux to 6.1.14 and U-Boot to 2023.01.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump Linux to 6.1.14 and U-Boot to 2023.01.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump Linux kernel to 6.1.14 and U-Boot to 2023.01.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump Linux kernel to 6.1.14, U-Boot to 2023.01, ATF to 2.8.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump Linux to 6.1.14 and U-Boot to 2023.01
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Let's use a more modern kernel with a broader range of hardware support
for PCs.
We stick to 6.1, rather than 6.2, as the former is an LTS, whicle the
latter is not.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump U-Boot to version 2023.04 and remove the patch that has already
been upstreamed.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The version of U-Boot must be explicitly set because if you keep the
default setting, the bootloader is continuously updated in buildroot with
the risk of building a non-working image.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Bump U-Boot to version 2023.04.
Tested on beaglebone black.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Linux Kernel 6.1 now being officially promoted to be a LTS, this
commit bump the kernel version of this defconfig to 6.1.14.
A Kernel config fragment "linux.fragment" is now needed as the kernel
no longer enable SBI v0.1 support and the earlycon RISC-V SBI in its
riscv arch defconfig. See [1] [2].
The Spike riscv-isa-sim was updated upstream accordingly [3].
In order to keep a smooth transition, this kernel config fragment
re-enable those options to make sure this kernel will work with
both old Spike versions (not including commit [3] like the v1.1.0
currently included in Buildroot), and newer versions. This commit
was also successfully tested with riscv-isa-sim at commit
0d1a48c0c0.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6f562570b9c5d6a3e30d87aec60a9d8f22a3203c
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=3938d5a2f9369d1ebd56320629fed395ce327e9c
[3] 191634d285
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump Linux kernel to v6.1.13 and increase the rootfs size accordingly.
- Bump the FVP in the readme to version 11.20 build 15 and update the
command line.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump Linux kernel version to 6.1.12.
- Bump U-Boot version to 2023.01 and rename config fragment to make it
clearer that it is not a complete config file.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump Linux kernel version to 6.1.12.
- Bump U-Boot version to 2023.01 and follow CONFIG_SYS_TEXT_BASE renaming.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Let's also enable BR2_TARGET_UBOOT_NEEDS_OPENSSL required by uboot to
build correctly.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Let's also reorder BR2_UBOOT_ options by moving
BR2_TARGET_UBOOT_FORMAT_DTB_IMX after BR2_TARGET_UBOOT_NEEDS_OPENSSL since
this reflects the order in boot/uboot/Config.in file.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The size of xipImage has grown by 84KB but there are still 278KB left
before running out of 2MB of flash memory.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
During the last U-boot version bump it's not been noted that the TPL
was not prepended to SPL anymore preventing the board to boot, so
let's copy TPL to the image folder, prepend it to u-boot-spl-dtb.bin
and place it at offset 32KB, where RK3288 bootrom expects to find
it. Let's also place u-boot-dtb separated from SPL at offset 8M, where
the SPL expects it to find it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Migrate versal-firmware package from nealfrager github to Xilinx github.
The images are identical, so this patch has zero impact on functionality.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Starting from version 2021.10 only distro booting is supported, as
reported by commit ff8f277e9121 ("ti: am335x_evm: Switch to DISTRO_BOOT only").
The patch allows to update U-Boot to versions later than 2021.10.
Tested on beaglebone black.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The previous version failed to boot from sd card with a log reported by
the document [1]. In my case it always failed, a 100% failure against
75% reported by the document.
Instead of adding the patch to fix the problem, I preferred to update
the kernel version.
Tested on beaglebone black.
[1] https://forum.beagleboard.org/t/5-10-x-beaglebone-black-fails-to-boot-from-sd-card/33297
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Linux 6.1.9 installs more modules and this makes rootfs size to increase
and the default 60M size is not enough. So let's expand rootfs size to
120M.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a defconfig to build a 32b ARMv7-A U-Boot based firmware implementing
the subset of UEFI defined by EBBR[1], as well as a Linux OS disk image
booting with UEFI, to run on Qemu.
The generated firmware binary can also be used to install or run another OS
supporting the EBBR specification.
[1]: https://github.com/ARM-software/ebbr
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds support for the BeagleBone Green Wireless to the
existing beaglebone_defconfig, by making sure the relevant Device Tree
is built and installed.
Signed-off-by: Ramon Crichlow <rcrichlow9000@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BSH SMM S2 PRO (SystemMaster S2 Pro) Board is an add-on board which
provide input and output interfaces to a dedicated carrier board. It is
designed mainly to provide graphical/video and connectivity interfaces
to the appliance.
Board support package includes the following components:
- mainline Linux kernel 6.1.6
- mainline U-Boot 2022-07
- Default packages from buildroot
https://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/
Add Ariel D'Alessandro and Dario Binacchi as co-maintainer, we work
together on platform mainline
Build and tested using:
docker pull registry.gitlab.com/buildroot.org/buildroot/base:20220105.2314
Cc: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Heiko Thiery <heiko.thiery@gmail.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Tested-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BSH SMM S2 (SystemMaster S2) Board is an add-on board which provide
input and output interfaces to a dedicated carrier board. It is designed
mainly to provide graphical/video and connectivity interfaces to the
appliance.
Board support package includes the following components:
- mainline Linux kernel 6.1.6
- mainline U-Boot 2022-07
- default packages from buildroot
https://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/
The smm s2 board is basically the same as the pro except it boots from
NAND instead of eMMC.
Co-authored-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The updated device tree is provided by Acme Systems:
https://www.acmesystems.it/compile_kernel_5_15
It is released under GPLv2 or later.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Migrate zcu106_pmufw.elf location from nealfrager github to Xilinx github.
The image is identical, so this patch has zero impact on functionality.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Migrate zcu102_pmufw.elf location from nealfrager github to Xilinx github.
The image is identical, so this patch has zero impact on functionality.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Migrate kv260_pmufw.elf location from nealfrager github to Xilinx github.
The image is identical, so this patch has zero impact on functionality.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Follow changes to other OrangePi boards, most importantly
orangepi-zero-plus2, which this board support is based on. This includes
switching to extlinux as boot mechanism and dropping custom U-Boot boot
script.
Rootfs image no longer fits into default 60M (mostly due to Linux
modules), so increase it to 120M.
While at it, bump Linux to 6.1.4 and U-Boot to 2023.01.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Linux DTS name has changed for the zynqmp_kria_kv260 with Xilinx 2022.2.
smk-k26-revA-sck-kv-g-revB has become zynqmp-smk-k26-revA-sck-kv-g-revB.
This DTS corresponds to generating the zynqmp-smk-k26-revA.dtb for the k26 som
and applying the zynqmp-sck-kv-g-revB.dtbo for the kv260 carrier board.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3477506541
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When using the buildroot compiler, it builds the u-boot.itb immediately
after building the fit-dtb.blob. This causes a build failure when using
the CONFIG_MULTI_DTB_FIT build configuration. This patch adds the necessary
dependency to guarantee that the fit-dtb.blob has finished building before
trying to build the u-boot.itb.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3310463281
This patch has been submitted to u-boot mainline:
https://lore.kernel.org/all/20221221075446.47141-1-neal.frager@amd.com/
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
