This commit doesn't touch infra packages.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Version 0.10.38 upgrades OpenSSL to version 1.0.1m, which includes fixes for
several CVEs:
- CVE-2015-0204
- CVE-2015-0286
- CVE-2015-0287
- CVE-2015-0289
- CVE-2015-0292
- CVE-2015-0293
- CVE-2015-0209
- CVE-2015-0288
Version 0.10.37 comes with a fix for CVE-2015-0278.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for building nodejs with hard floating ABI if supported by the
target and remove bogus comment. Buildroot does propose this tuning.
Basically, you have three cases of floating point strategies:
* soft float, i.e 'soft' in nodejs speak. This is enabled in Buildroot
when BR2_ARM_EABI=y and BR2_SOFT_FLOAT=y.
* hard float using integer registers to pass floating point arguments,
i.e 'softfp' in nodejs speak. This is enabled in Buildroot when
BR2_ARM_EABI=y and BR2_SOFT_FLOAT is disabled.
* hard float using floating pointer registers to pass floating point
arguments, i.e 'hard' in nodejs speak. This is enabled in Buildroot
when BR2_ARM_EABIHF=y.
This patch fixes "[Buildroot] Float error on SAMA5D3 Xplained using nodejs":
http://lists.busybox.net/pipermail/buildroot/2014-December/114254.html
Tested at run-time by me on a TI Beaglebone Black.
[Thomas: add qstrip call when using the BR2_GCC_TARGET_FLOAT_ABI
variable.]
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Reported-by: Cédric Heyman <c.heyman@til-technologies.fr>
Suggested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit e712638b4a.
The config options --without-ssl2 and --without-ssl3 are intended to be used if
nodejs is built with the bundled OpenSSL library for excluding the SSL2 and
SSL3 features.
Both options are actual only evaluated if --without-ssl is not set:
$ cat configure | grep configure_openssl -n -A 13
619:def configure_openssl(o):
620- o['variables']['node_use_openssl'] = b(not options.without_ssl)
621- o['variables']['node_shared_openssl'] = b(options.shared_openssl)
622- o['variables']['openssl_no_asm'] = (
623- 1 if options.openssl_no_asm else 0)
624-
625- if options.without_ssl:
626- return
627-
628- if options.ssl2:
629- o['defines'] += ['OPENSSL_NO_SSL2=1']
630-
631- if options.ssl3:
632- o['defines'] += ['OPENSSL_NO_SSL3=1']
[Peter: adjusted commit text to make it clear that it is a revert]
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Tested-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This release handles the recent POODLE vulnerability [CVE-2014-3566] by
disabling SSLv2/SSLv3 by default.
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Buildroot coding style defines one space around make assignments and
does not align the assignment symbols.
This patch does a bulk fix of offending packages. The package
infrastructures (or more in general assignments to calculated variable
names, like $(2)_FOO) are not touched.
Alignment of line continuation characters (\) is kept as-is.
The sed command used to do this replacement is:
find * -name "*.mk" | xargs sed -i \
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*$#\1 \2#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\]\+\)$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\ \t]\+\s*\\\)\s*$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\(\s*\\\)#\1 \2\3#'
Brief explanation of this command:
^\([A-Z0-9a-z_]\+\) a regular variable at the beginning of the line
\([?:+]\?=\) any assignment character =, :=, ?=, +=
\([^\\]\+\) any string not containing a line continuation
\([^\\ \t]\+\s*\\\) string, optional whitespace, followed by a
line continuation character
\(\s*\\\) optional whitespace, followed by a line
continuation character
Hence, the first subexpression handles empty assignments, the second
handles regular assignments, the third handles regular assignments with
line continuation, and the fourth empty assignments with line
continuation.
This expression was tested on following test text: (initial tab not
included)
FOO = spaces before
FOO = spaces before and after
FOO = tab before
FOO = tab and spaces before
FOO = tab after
FOO = tab and spaces after
FOO = spaces and tab after
FOO = \
FOO = bar \
FOO = bar space \
FOO = \
GENIMAGE_DEPENDENCIES = host-pkgconf libconfuse
FOO += spaces before
FOO ?= spaces before and after
FOO :=
FOO =
FOO =
FOO =
FOO =
$(MAKE1) CROSS_COMPILE=$(TARGET_CROSS) -C
AT91BOOTSTRAP3_DEFCONFIG = \
AXEL_DISABLE_I18N=--i18n=0
After this bulk change, following manual fixups were done:
- fix line continuation alignment in cegui06 and spice (the sed
expression leaves the number of whitespace between the value and line
continuation character intact, but the whitespace before that could have
changed, causing misalignment.
- qt5base was reverted, as this package uses extensive alignment which
actually makes the code more readable.
Finally, the end result was manually reviewed.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Cc: Yann E. Morin <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 89fae0d05d ("nodejs: Add
dependency on zlib"), Paul added a dependency of host-nodejs on
host-zlib. When host-zlib is built, the host variant of zlib is
installed in $(HOST_DIR)/usr/lib. However, even though
-L$(HOST_DIR)/usr/lib is passed to the LDFLAGS of host-nodejs
configure script, those LDFLAGS are not re-used at build and install
time. This is because nodejs does not use the autotools and its
configure script does not "save" the environment variables such as
LDFLAGS. This is causing build failures such as:
http://autobuild.buildroot.org/results/802/802134ceb92d82d2d4ef6a81c67ad1c98696663a/
due to the fact that the host zlib cannot be found.
This commit fixes that by passing $(HOST_CONFIGURE_OPTS) explicitly at
both build time and install time of host-nodejs. This approach was
already used for the target variant of nodejs.
Cc: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Prior to this commit, nodejs would build zlib itself and link statically
to it.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When Python 3 is selected in Buildroot, the host/usr/bin/python
symlink of the host Python interpreter points to python3. Packages
that need to use the host Python 2 interpreter have to use python2.
In commit 40218a1652 ("nodejs: force
python interpreter"), Samuel made some changes to the nodejs package
to use python2. One part of the changes is to sed a .gyp file to
replace the string 'python' by the path to python2. However, this
operation is done *after* calling the configure script, so it has in
fact no effect. Putting this sed before calling the configure script
fixes the problem.
However, there is a better solution: the nodejs build system has a
mechanism of variables, and it already defines a python variable
according to the environment variable PYTHON being passed. So this
patch instead adds a new patch to nodejs to use this python variable.
Fixes:
http://autobuild.buildroot.org/results/aff/affd7300895ec400de50a33d51b4e94e15d63341/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit ea737fb100, which in
the end didn't fix the autobuilder problem. Since then,
fb80d28341 ('nodejs: add a patch forcing
link command to use CXX') was added, and was successfully tested.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
nodejs build system is based on python, and it does not support python3.
This patch makes sure python2 is used for the build.
Note that, setting PYTHON=... at configure time or in the make
environment is not enough to override all the hard-coded python call, so
we have to sed some python scripts to avoid being screwed.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also cleanup leading whitespace.
Note that overloading LD in required to avoid linker failures.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This makes building on mipsel possible (hard-float variant only).
[Peter: also adjust dependenciess for comment]
Signed-Off-By: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Based off of patches posted by (and Signed-off-by:) Jonathan Liu <net147@gmail.com>
[Peter: fix Config.in whitespace]
Signed-off-by: Daniel Price <daniel.price@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>