Initially we had a port only for ARCv2 cores but then with a simple
change ARCompact cores got supported as well.
So we generalize from BR2_archs to BR2_arcle as we haven't tried to
get glibc working on big-endian ARCs yet.
Also we never bothered to check avaialbility of atomic instructions in
the core but in case of Glibc for ARC this is really a must, so we add
this check here.
Note in case of uClibc we may have system w/o HW atomics but:
1. Only single-core systems are allowed
2. Atomic instructions are emulated via arc_usr_cmpxchg syscall
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
nsswitch.conf is processed both by the toolchain, nss-mdns and
nss-myhostname without any guaranteed ordering in between.
The toolchain package ensures that nsswitch.conf is available, and the two
nss-* packages tweaks the content, so the toolchain processing should run
before the nss-* ones. Toolchain is a dependency of all the packages, so
ensure this is done by moving the toolchain handling to a
post-target-install hook.
Also move the variable to toolchain/toolchain/toolchain.mk where the virtual
toolchain package is defined for clarity.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If a custom external toolchain is used, we can't enable the fortran
support. Add a new option for that.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is the same toolchain that was previously distributed by Linaro. [1]
Switch default toolchain as this toolchain supersed the Linaro AArch64-BE toolchain.
Only x86_64 host are supported, so keep Linaro toolchain for x86 host.
[1] https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is the same toolchain that was previously distributed by Linaro. [1]
Switch default toolchain as this toolchain supersed the Linaro AArch64 toolchain.
Only x86_64 host are supported, so keep Linaro toolchain for x86 host.
Tested with qemu_aarch64_virt_defconfig.
[1] https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is the same toolchain that was previously distributed by Linaro. [1]
Switch default toolchain as this toolchain supersed the Linaro ARM toolchain.
Only x86_64 host are supported, so keep Linaro toolchain for x86 host.
Tested with qemu_arm_vexpress_defconfig.
[1] https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Migrate the stack protection flag management into the wrapper.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The RELRO/PIE flags are currently passed via CFLAGS/LDFLAGS and this patch
proposes moving them to the toolchain wrapper.
(1) The flags should _always_ be passed, without leaving the possibility
for any package to ignore them. I.e, when BR2_RELRO_FULL=y is used
in a build, all executables should be built PIE. Passing those
options through the wrapper ensures they are used during the build
of all packages.
(2) Some options are incompatible with -fPIE. For example, when
building object files for a shared libraries, -fPIC is used, and
-fPIE shouldn't be used in combination with -fPIE. Similarly, -r
or -static are directly incompatible as they are different link
time behaviors then the intent of PIE. Passing those options
through the wrapper allows to add some "smart" logic to only pass
-fPIE/-pie when relevant.
(3) Some toolchain, kernel and bootloader packages may want to
explicitly disable PIE in a build where the rest of the userspace
has intentionally enabled it. The wrapper provides an option
to key on the -fno-pie/-no-pie and bypass the appending of RELRO
flags.
The current Kernel and U-boot source trees include this option.
8438ee76b06ace36e19a
If using PIE with a older Kernel and/or U-boot version, a backport of these
changes might be required. However this patchset also uses the
__KERNEL__ and __UBOOT__ defines as a way to disable PIE.
NOTE: The current implementation via CFLAGS/LDFLAGS has caused some
build time failures as the conditional logic doesn't yet exist in
Buildroot:
https://bugs.busybox.net/show_bug.cgi?id=11206https://bugs.busybox.net/show_bug.cgi?id=11321
Good summary of the most common build failures related to
enabling pie: https://wiki.ubuntu.com/SecurityTeam/PIE
[Peter: minor cleanups]
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
commit e0d14fb21b (toolchain-external: drop no longer needed
CC_TARGET_<foo>_ variables) dropped the CC_TARGET_* variables, but missed
one. Fix that.
Reported-by: Mark Corbin <mark.corbin@embecosm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the introduction of the GCC_TARGET_<foo> variables in
arch/arch.mk in commit bd0640a213
("arch: allow GCC target options to be optionally overwritten") and
the removal of the BR2_GCC_TARGET_CPU_REVISION, the CC_TARGET_<foo>_
variables in pkg-toolchain-external.mk map 1:1 with the corresponding
GCC_TARGET_<foo> variables.
So let's drop the CC_TARGET_<foo>_ variables, and use directly the
GCC_TARGET_<foo> ones.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 325bb37942, support for the
Blackfin architecture was removed. This was our only use of
BR2_GCC_TARGET_CPU_REVISION, and since this config option somewhat
complicates the calculation of the --with-cpu/-mcpu option values,
let's drop it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This enables a riscv64 system to be built with a Buildroot generated
toolchain (gcc >= 7.x, binutils >= 2.30, glibc only).
This configuration has been used to successfully build a qemu-bootable
riscv-linux-4.15 kernel (https://github.com/riscv/riscv-linux.git).
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
[Thomas:
- simplify arch.mk.riscv by directly setting GCC_TARGET_ARCH
- simplify glibc.mk changes by using GLIBC_CONF_ENV.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_GCC_TARGET_* configuration variables are copied to
corresponding GCC_TARGET_* variables which may then be optionally
modified or overwritten by architecture specific makefiles.
All makefiles must use the new GCC_TARGET_* variables instead
of the BR2_GCC_TARGET_* versions.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
[Thomas: simplify include of arch/arch.mk]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The check_musl function currently builds a program and verifies if the
program interpreter starts with /lib/ld-musl. While this works fine
for dynamically linked programs, this obviously doesn't work for a
purely static musl toolchain such as [1].
There is no easy way to identify a toolchain as using the musl C
library. For glibc, dynamic linking is always supported, so we look at
the dynamic linker name. For uClibc, there is a distinctive
uClibc_config.h header file. There is no such distinctive feature in
musl.
We end up resorting to looking for the string MUSL_LOCPATH, which is
used by musl locale_map.c source file. This string has been present in
musl since 2014. It certainly isn't a very stable or convincing
solution to identify the C library as being musl, but it's the best we
could find.
Note that we are sure there is a libc.a file, because the
check_unusable_toolchain function checks that there is a such a file.
[1] http://autobuild.buildroot.net/toolchains/tarballs/br-arm-musl-static-2018.05.tar.bz2
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS variable and
use it in BR2_TOOLCHAIN_HAS_GCC_BUG_64735.
This new variable will be used to select boost atomic when lock-free
atomic ints are not available
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds a new package for the Linaro external toolchain for
the AArch64 Big Endian architecture.
https://releases.linaro.org/components/toolchain/binaries/7.3-2018.05
Signed-off-by: Ofer Heifetz <oferh@marvell.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Lets update prebuilt ARC toolchain to the most recent arc-2018.03.
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Re-add BR2_TOOLCHAIN_HAS_SSP since the toolchain support SSP.
Tested with qemu_nios2_10m50_defconfig and Qemu 2.10.1-3.fc27 release.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch allows to use an external toolchain based on gcc 8.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In order to add gcc 8 support for internal and external toolchain in
follow-up commits, introduce BR2_TOOLCHAIN_GCC_AT_LEAST_8 symbol.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit b9882925a4 (toolchain: introduce
BR2_TOOLCHAIN_HAS_SHADOW_PASSWORDS) added this symbol to identify
Blackfin toolchains without shadow passwords support. We no longer
support Blackfin.
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_TOOLCHAIN_UCLIBC symbol doesn't exist, it was meant to be
BR2_TOOLCHAIN_BUILDROOT_UCLIBC.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There are cases where a downloaded toolchain doesn't have its binaries
placed directly in a "bin" subfolder (where BuildRoot currently looks
for them).
A common example is the official Raspberry Pi Toolchain
(https://github.com/raspberrypi/tools), which has its binaries in
"arm-bcm2708/arm-linux-gnueabihf/bin".
This commit introduces BR2_TOOLCHAIN_EXTERNAL_REL_BIN_PATH that defaults
to "bin" and can be changed as needed.
Signed-off-by: Calin Crisan <ccrisan@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: rework a bit how TOOLCHAIN_EXTERNAL_REL_BIN_PATH is defined.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since gcc 4.6, GCC deprecated -mfused-madd, -ffp-contract=off should
be used for the Xburst workaround.
Tested with the MIPS Sourcery 2011.03 toolchain (based on gcc 4.5),
the toolchain wrapper uses -mno-fused-madd, as expected:
$ BR2_DEBUG_WRAPPER=2 ./output/host/bin/mips-linux-gnu-gcc -o toto toto.c
Toolchain wrapper executing:
'/home/thomas/toolchains/mips-2011.03/bin/mips-linux-gnu-gcc'
'--sysroot'
'/home/thomas/projets/buildroot/output/host/mipsel-buildroot-linux-gnu/sysroot'
'-mabi=32'
'-msoft-float'
'-mno-fused-madd'
'-EL'
'-march=mips32r2'
'-o'
'toto'
'toto.c'
And with the MIPS Sourcery 2012.09 toolchain (based on gcc 4.7), the
toolchain wrapper uses -ffp-contract=off, as expected:
$ BR2_DEBUG_WRAPPER=2 ./output/host/bin/mips-linux-gnu-gcc -o toto toto.c
Toolchain wrapper executing:
'/home/thomas/toolchains/mips-2012.09/bin/mips-linux-gnu-gcc'
'--sysroot'
'/home/thomas/projets/buildroot/output/host/mipsel-buildroot-linux-gnu/sysroot'
'-mabi=32'
'-msoft-float'
'-ffp-contract=off'
'-EL'
'-march=mips32r2'
'-o'
'toto'
'toto.c'
Fixes the ci20_defconfig build:
https://gitlab.com/buildroot.org/buildroot/-/jobs/60303132
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: rework to continue supporting pre-gcc-4.6 toolchains, extend
the commit log after doing more testing.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
... to follow the convention: type, default, depends on, select, help.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rearrange the header of the .mk file so it becomes similar to a header
from a package. It doesn't fit in one line, so split the details to a
comment below the header.
GCONV_LIBS is only used inside this file, so rename it to start with
TOOLCHAIN_, following the namespace convention already used by packages.
Rename the hook COPY_GCONV_LIBS to TOOLCHAIN_GLIBC_COPY_GCONV_LIBS
following the convention used for hooks in packages.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The header of the .mk file fits in one line, so rearrange it to be
similar to a header from a package.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
toolchain-common.in is a Config.in file with an uncommon name.
It is just included by toolchain/Config.in, and toolchain/Config.in is
not that long, so instead of renaming the file, merge it to
toolchain/Config.in.
Move the raw contents from the file to the exact location it is
currently included in order to not change the order in the menu.
Update the references in the manual as well.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, the toolchainfile.cmake and Buildroot.cmake files are
installed outside of any package, just triggered by the toolchain
target.
As part of the per-package SDK effort, we are trying to avoid anything
that installs to the global $(HOST_DIR), and this is one of the
remaining files installed in $(HOST_DIR) outside of any package. We
fix this by installing such files as part of the toolchain package
post-install staging hooks.
Yes, a post-install staging hook to install things to $(HOST_DIR) is a
bit weird, but the toolchain infrastructure is made of target packages
only, and they all install a lot of stuff to $(HOST_DIR) already.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The musl/kernel headers workaround was added in commit 196932cd91
(toolchain: workaround musl/kernel headers conflict) to fix definition
collisions in networking related headers between musl headers and kernel
headers. Kernel headers from version 4.15 and newer do not need this
workaround anymore since kernel commit c0bace798436bc (uapi libc compat:
add fallback for unsupported libcs). The C library does not have to
define the __GLIBC__ macro to make the __UAPI_DEF_* macros effective.
Updated the comment to accordingly.
Tested with the xl2tp package. This package fails to build with older
kernel headers without the workaround (struct in_pktinfo redefinition,
among others). With 4.15 headers, xl2tp builds fine with this patch
applied. That is, no workaround needed.
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libatomic, like libgcc_s, is provided by gcc, so there is no reason to
copy it over only for the glibc and uclibc cases, it should also be
copied for the musl case. Without this, a program linked with
libatomic on a musl system will fail to run due to the missing
library.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There might be subtle differences between uClibc configuration
compared to Buildroot's one.
Native RPC now is disabled because uClinc-ng has removed it.
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: arc-buildroot@synopsys.com
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Verified experimentally by using exception_ptr with m68k_cf5208 and
looking at the value of ATOMIC_INT_LOCK_FREE. ATOMIC_INT_LOCK_FREE=1,
so the issue is present. Also verified that gcc 7.x fixed it also for
cf5208.
Signed-off-by: Jan Heylen <jan.heylen@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The upcoming per-package SDK functionality is heavily based on the
fact that HOST_DIR, STAGING_DIR and TARGET_DIR are evaluated during
the configure/build/install steps of the packages. Therefore, any
evaluation-during-assignment using := is going to cause problems, and
need to be turned into evaluation-during-use using =.
This patch fix up one such instance in the external toolchain code.
This change is independent from the per-package SDK functionality, and
could be applied separately.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This merges the next branch accumulated during the 2017.11 release
cycle back into the master branch.
A few conflicts had to be resolved:
- In the DEVELOPERS file, because Fabrice Fontaine was added as a
developer for libupnp in master, and for libupnp18 in
next. Resolution is simple: add him for both.
- linux/Config.in, because we updated the 4.13.x release used by
default in master, while we moved to 4.14 in next. Resolution: use
4.14.
- package/libupnp/libupnp.hash: a hash for the license file was added
in master, while the package was bumped into next. Resolution: keep
the hash for the license file, and keep the hash for the newest
version of libupnp.
- package/linux-headers/Config.in.host: default version of the kernel
headers for 4.13 was bumped to the latest 4.13.x in master, but was
changed to 4.14 in next. Resolution: use 4.14.
- package/samba4/: samba was bumped to 4.6.11 in master for security
reasons, but was bumped to 4.7.3 in next. Resolution: keep 4.7.3.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With Linux kernel >= 4.13.x musl or1k can be used
with Qemu.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 4a5140ecf (toolchain/buildroot: glibc requires kernel headers >=
4.5 with NaN-2008) added a restriction on kernel headers for glibc when
the architecture is using naN-2008.
However, such a restriction is usually associated to a comment explaining
the restriction, so the user knows what is happening.
That comment was forgotten in 4a5140ecf. Add it now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For armv8, there are different profiles: A, M and R, like there is for
armv7.
So, rename our internal symbol to mirror what we do for armv7.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
From sysdeps/unix/sysv/linux/mips/configure.ac in glibc:
if test -z "$arch_minimum_kernel"; then
if test x$libc_cv_mips_nan2008 = xyes; then
arch_minimum_kernel=4.5.0
fi
fi
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the possibility to choose the floating point mode (32, xx or
64) is conditional on having a sufficiently recent gcc version.
Which means that the architecture selection depends on the gcc version.
But that's opposite to what we've always done in Buildroot: the software
versions are conditional to the architecture options. There is nothing
we can do about the hardware: it is there, we can't change it, while we
can restrict ourselves to using software that is working on said
hardware.
Thus, we inverse the logic, to move the condition onto the software
side: whenever mfpxx is selected, we restrict the toolchain selection to
at least a gcc-5.
And now, the blind BR2_TOOLCHAIN_HAS_MFPXX_OPTION symbol is no longer
needed, so we get rid of it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Take the conditions currently specified in the gcc version choice.
Also, the conditions explained in the commit log for 78c2a9f7 were not
all properly applied, especially the a57-a53 combo needs gcc-6, but
78c2a9f7 forgot to add the condition to gcc-4.9.
gcc-4.9 was excluded for cortex-a17 and a72, but the CodeSourcery
external toolchain, which uses 4.8, was not excluded for those two
cores. Now it is.
Remove the arch condition from gcc and the external toolchains.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Hide the toolchains if the arch requires a gcc version more recent
than the one they provide.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When an architecture expresses a requirement on the gcc version, limit
the version choice in the custom external toolchain.
The rationale being that there is no point in offering that version to
the user if we know before-hand that the gcc version will not work for
that architecture.
All versions below the minimum we support is just made conditional to
that minimum as well, including the "older" entry.
However, this means that the "older" entry is no longer available when
the architecture requires a minimum gcc version. A user who wants to use
a toolchain with a gcc older than the minimum will have no choice but to
realise the toolchain is not suitable (or lie and we would catch that
when checking the gcc version anyway).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 'include' directive in GNU make supports wildcards, but their
expansion has no defined sort order (GLOB_NOSORT is passed to glob()).
Usually this doesn't matter. However, there is at least one case where
it does make a difference: toolchain/*/*.mk includes both the
definitions of the external toolchain packages and
pkg-toolchain-external.mk, but pkg-toolchain-external.mk must be
included first.
For predictability, use ordered 'include $(sort $(wildcard ...))'
instead of unordered direct 'include */*.mk' everywhere.
Fixes [1] reported by Petr Vorel:
make: *** No rule to make target 'toolchain-external-custom', needed by '.../build/toolchain-external/.stamp_configured'. Stop.
[1] http://lists.busybox.net/pipermail/buildroot/2017-November/206969.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: Petr Vorel <petr.vorel@gmail.com>
[Arnout: also sort the one remaining include, of the external docs]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Starting with version 7, gcc automatically recognises and enforces the
environment variable SOURCE_DATE_EPOCH, and fakes __DATE__ and __TIME__
accordingly, to produce reproducible builds (at least in regards to date
and time).
However, older gcc versions do not offer this feature.
So, we use our toolchain wrapper to force-feed __DATE__ and __TIME__ as
macros, which will take precedence over those that gcc may compute
itself. We compute them according to the specs:
https://reproducible-builds.org/specs/source-date-epoch/https://gcc.gnu.org/onlinedocs/cpp/Standard-Predefined-Macros.html
Since we define macros otherwise internal to gcc, we have to tell it not
to warn about that. The -Wno-builtin-macro-redefined flag was introduced
in gcc-4.4.0. Therefore, we make BR2_REPRODUCIBLE depend on GCC >= 4.4.
gcc-7 will ignore SOURCE_DATE_EPOCH when __DATE__ and __TIME__ are
user-defined. Anyway, this is of no consequence: whether __DATE__ and
__TIME__ or SOURCE_DATE_EPOCH takes precedence, it would yield the
exact same end result since we use the same logic to compute it. Note
that we didn't copy the code for it from gcc so using the same logic
doesn't imply that we're inheriting GPL-3.0.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
[Arnout: rewrite commit message]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Finally there's working ARC port of glibc thanks to Vineet and Cuper!
This port is based on pretty recent glibc's master branch and ARC
changes are being reviewed now in glibc's mailing list.
Thus we again have to use sources from our GitHub but as soon as there's
a glibc release with our patches applied we'll switch to upstream releases
and will drop our glibc GitHub repo alltogether.
Note now we cut tags in glibc repo simultaneously with tags
in Binutils and GCC repos and so to make sure everything works in the best
way we plan to update glibc tag together with Binutils and GCC.
Also note as of today ARCompact (AKA ARCv1 ISA) is not supported in glibc
but we plan to fix it soonish so for now we make glibc intentionally
dependent on archs38.
Also note we are not creating directory "2.26" because all patches for glibc
ver 2.26 applies to arc glibc port.
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
CC: Alexey Brodkin <abrodkin@synopsys.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: Waldemar Brodkorb <wbx@openadk.org>
CC: Romain Naour <romain.naour@gmail.com>
Cc: Cupertino Miranda <cmiranda@synopsys.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some cores are not supported by upstream gcc.
Use the newly-introduced symbol to state so, rather than have the
exclusion in the toolchain choice.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some cores are not supported by upstream gcc.
Use the newly-introduced symbol to state so, rather than have the
exclusion in the toolchain choice.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream gcc does not have support for C-Sky, and we do not have a
vendor tree for it either (yet?).
Use the newly-introduced symbol to state so, rather than have the
exclusion in the toolchain choice.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some architectures or specific cores do not have support in upstream
gcc. Currently, they are individually listed as exclusions in the
toolchain choice.
This poses a maintainance burden, as the knowledge about what gcc
version supports what architecture is split across many places: the
toolchain choice, the gcc version choice, the external toolchains.
As a first step, add a blind option that architectures or individual
cores may select to indicate they lack support in our internal backend.
Actual use of the option will come in followup patches.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since glibc 2.26, kernel headers >= 3.10 are needed on powerpc64le [1].
In order to prepare the glibc bump to this version, we don't allow to
build a Buildroot toolchain with kernel headers older than 3.10.
[1] https://sourceware.org/git/?p=glibc.git;a=commit;h=c2ff5ec13fca1bdd1cd646a0260808386d7bd7ff
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
GDB has been updated to 8.0 version in the release.
https://releases.linaro.org/components/toolchain/binaries/6.4-2017.08
Tested with qemu_aarch64_virt_defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
GDB has been updated to 8.0 version in the release.
https://releases.linaro.org/components/toolchain/binaries/6.4-2017.08
Tested with qemu_arm_vexpress_defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When using an external toolchain that was built with Buildroot and a
merged /usr, the dynamic linker is actually in /usr/lib.
But the check_glibc macro limits the depth it is looking for the dynamic
linker, and misses it when it is in /usr/lib because it is too deep.
We could fix that in two ways: increase the depth in which we look
for it, or follow symlinks. We choose the second solution.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Commit 1b974425 (MIPS: add support for M6201 cores) explained that the
new core was not supported by upstream gcc, and as of gcc-8-trunk
that's still the case.
Ditto for 3cfbeb83 (MIPS: add support for P6600 cores).
This means that we currently allow to build an internal tolchain for
those cores, yet we have no suitable gcc version.
Disable the internal backend in this case.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since 392b0a26f5 (toolchain-external: default BR2_TOOLCHAIN_EXTERNAL_PATH
to empty), calling 'make clean' or similar can yield a spurious stderr
message:
dirname: missing operand
Try 'dirname --help' for more information.
Which is definitely baffling and unsettling...
It turns out that it is pretty trivial to reproduce, and this defconfig
is just enough:
$ cat my-defconfig
BR2_TOOLCHAIN_EXTERNAL=y
$ make BR2_DEFCONFIG=$(pwd)/my-defconfig defconfig
$ make clean
dirname: missing operand
Try 'dirname --help' for more information.
[--snip--]
This is because the cross-compiler is not found in the PATH (and for
good reasons, I don't have it in the PATH, not even at all).
So, when the cross-compiler is not found in the path, we simply
continue as if all was good, and postpone the check to much later,
when we try to copy the toolchain libs...
So, use a make construct rather than calling to the shell: $(dir ...)
does not whine if passed nothing.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The big.LITTLE configurations can be optimised for by gcc, and a few
users wonder what they should choose when they have such CPUs.
Add new entries for those big.LITTLE configurations.
Note: the various combos were added in various gcc versions, but only
really worked in later versions:
Variant | Introduced in | First built in
----------+---------------+----------------
a15-a7 | 4.9 | 4.9
a17-a7 | 5 | 5
a57-a53 | 4.9 | 6
a72-a53 | 5 | 6
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-mfpxx option was added in gcc-5.1.0 so make sure that users cannot
select the "xx" fp32 mode when using toolchains that have a gcc older
than 5.1.0.
-mfp32 and -mfp64 were added in gcc-4.1.0, so given the older gcc
version we support in Buildroot (in the GCC_AT_LEAST options) is 4.3 we
don't need to do anything else for them.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-mnan option was added in gcc-4.9.0 so make sure that users cannot
select the NaN mode when using toolchains that have a gcc older
than 4.9.0, and also make sure that the -mnan option is not passed at
all to the toolchain-wrapper and target cflags.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
MIPS32 support different FP modes (32,xx,64), so give the user the
opportunity to choose between them. That will cause host-gcc to be built
using the --with-fp-32=[32|xx|64] configure option. Also the
-mfp[32|xx|64] gcc option will be added to TARGET_CFLAGS and to the
toolchain wrapper.
FP mode option shouldn't be used for soft-float, so we add logic in the
toolchain wrapper if -msoft-float is among the arguments in order to not
append the -fp[[32|xx|64] option, otherwise the compilation may fail.
Information about FP modes here:
- https://sourceware.org/binutils/docs/as/MIPS-Options.html
- https://dmz-portal.imgtec.com/wiki/MIPS_O32_ABI_-_FR0_and_FR1_Interlinking#5._Generating_modeless_code
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
MIPS supports two different NaN encodings, legacy and 2008. Information
about MIPS NaN encodings can be found here:
https://sourceware.org/binutils/docs/as/MIPS-NaN-Encodings.html
NaN legacy is the only option available for R2 cores and older.
NaN 2008 is the only option available for R6 cores.
R5 cores can have either NaN legacy or NaN 2008, depending on the
implementation. So, if the user selects a generic R5 target architecture
variant, we show a choice menu with both options available. For well
known R5 cores we directly select the NaN enconding they use.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It makes no sense to default to an arbitrary path. In addition, it in
fact works correctly when it is empty. In that case, the toolchain will
be searched in PATH.
Update the help text to explain the above, and also that the compiler
is supposed to be in the bin subdirectory.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 14151d77af that eliminated
$(HOST_DIR)/usr seriously missed the toolchain-wrapper - only a single
reference was updated, the other three were missed. Commit
015d68c84c removed one more. This commit
finally removes the two remaining ones.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The toolchain wrapper, when called through PATH, strips the last three
levels of /proc/self/exe to find HOST_DIR. However, after the host/usr
removal, this should be just two levels.
The toolchain wrapper has different logic for when it is called with a
full path (i.e. $HOST_DIR/usr/bin/arm-linux-gcc) then when it is called
through the PATH (i.e. just arm-linux-gcc). The latter is never used
internally in Buildroot, that's why this wasn't discovered through
testing.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Mark Jackson <mpfj-list@newflow.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 32bec8ee2f (toolchain-external: copy ld*.so* for all C libraries)
removed the definition of TOOLCHAIN_EXTERNAL_MUSL_LD_LINK. Remove also the
reference to it.
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit 32bec8ee2f
("toolchain-external: copy ld*.so* for all C libraries") we changed
how the musl dynamic linker symbolic link was being created. Instead
of having specific logic in Buildroot, we switched to simply copying
the ld*.so.* symbolic link from staging to target, as well as the
target of this symbolic link.
However, it turns out that by default, musl creates its dynamic linker
symbolic link with an absolute path as the target of the link:
/lib/libc.so.
Therefore, external Musl toolchains built with Buildroot look like
this:
lrwxrwxrwx 1 thomas thomas 12 Jul 4 19:46 ld-musl-armhf.so.1 -> /lib/libc.so
The principle of the copy_toolchain_lib_root function, which is used
to copy libraries from staging to target, is to copy symbolic links
and follow their targets. In this case, it means we end up copying
/lib/libc.so (from the host machine) into the target folder. From
there on, there are two cases:
1. /lib/libc.so exists in your host system. It gets copied to the
target. But later on, Buildroot also copies /lib/libc.so from
staging to target, overwriting the bogus libc.so. So everything
works fine, even though it's admittedly ugly.
2. /lib/libc.so doesn't exist in your host system. In this case, the
build fails with no clear error message.
This problem does not happen with Musl toolchains built by
Crosstool-NG, because Crosstool-NG replaces the absolute target of the
dynamic linker symbolic link by a relative path.
However, since we want to support existing Buildroot Musl toolchains
and generally work with the fact that Musl by default installs an
absolute symlink, the following commit improves the
copy_toolchain_sysroot function to replace symbolic links with an
absolute destination to use a relative destination. I.e, in staging,
the ld-musl-armhf.so.1 symbolic link looks like this:
lrwxrwxrwx 1 thomas thomas 14 Jul 5 22:59 output/staging/lib/ld-musl-armhf.so.1 -> ../lib/libc.so
Fixes:
http://autobuild.buildroot.net/results/ce80264575918a8f71d9eab1091c21df85b65b1a/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit b3cc7e65ee, the definition of the DESTDIR variable was moved
down into the loop that follows symlinks in the libraries that are
copied to target. However, the corresponding mkdir was not moved down,
so that no directories are ever created.
In practice, this mkdir is normally redundant since the directories
should already have been created as part of creating STAGING_DIR.
Still, the current situation is clearly wrong, so fix it by moving the
mkdir down to after the assignment to DESTDIR.
While we're at it, also remove a redundant empty line. It's a leftover
from when a lot of variables were declared above.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/bin' | xargs sed -i 's%$(HOST_DIR)/usr/bin%$(HOST_DIR)/bin%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In copy_toolchain_sysroot, if no ld.so has been found in the
STAGING_DIR after the sysroot copy, we look at ARCH_SYSROOT_DIR if a
ld.so is available there. We do this for both ld*.so and ld*.so.*.
However, when copying thing from staging to target (as listed in
TOOLCHAIN_EXTERNAL_LIBS), we only match on ld*.so.*. This would mean
that even if a dynamic linker matching ld*.so but not ld*.so.* was
copied into staging by copy_toolchain_sysroot, it would anyway not be
copied to the target filesystem, making the system unusable.
Therefore, we can remove the special case on ld*.so, and keep only
ld*.so.*.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libgcc_s.so is now added to TOOLCHAIN_EXTERNAL_LIBS for glibc/uclibc
in one place, and for musl in another place. Bottom line: it should be
in TOOLCHAIN_EXTERNAL_LIBS unconditionally.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, for the dynamic loader, we're copying ld*.so* for glibc and
uClibc, except for glibc/EABIhf where we are explicitly copying
ld-linux-armhf.so.*. For musl, we're not copying the dynamic linker
because it's simply a symbolic link to libc.so. However, the name of
the musl dynamic linker changes from one architecture to the other,
and we don't handle all cases.
Since handling the musl dynamic linker symlink creation is becoming
more and more annoying to maintain, this commit makes musl use the
same mechanism as glibc/uClibc: put the dynamic linker in
TOOLCHAIN_EXTERNAL_LIBS.
In addition, the special condition on glibc/EABIhf was added in
11ec38b695 ("toolchain-external: fix
Linaro ARM toolchain support") because an old Linaro toolchain had two
dynamic loaders, and we wanted to copy only one. But 1/ this is old
and 2/ having the two dynamic linkers doesn't really matter.
So this commit simply unconditionally adds "ld*.so*" to
TOOLCHAIN_EXTERNAL_LIBS, regardless of the C library being chosen. It
re-uses the musl dynamic linker symlink from the sysroot, which makes
it always correct, and allows us to remove the
TOOLCHAIN_EXTERNAL_MUSL_LD_LINK hook, and all the related logic.
This commit therefore solves two problems with the musl dynamic linker
symbolic link creation logic:
1 We support all architectures, without having to hardcode in
Buildroot the mapping between the CPU architecture and the
corresponding dynamic linker name. For example, our current logic
was not handling the mips64+n32 ABI case, where the dynamic linker
is named ld-musl-mipsn32el.so.1.
2 We support Crosstool-NG musl toolchains, where the dynamic linker
is in /lib, but libc.so is in /usr/lib.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
This commit therefore replaces:
- https://patchwork.ozlabs.org/patch/780411/ (was another solution
for solving problem 1 above)
- https://patchwork.ozlabs.org/patch/763977/ and
https://patchwork.ozlabs.org/patch/748974/ (was another solution
for solving problem 2 above)
copy_toolchain_lib_root copies libraries from staging to target,
resolving and copying symbolic links along the way.
The most inner loop, a "while" loop, starts from an initial name, and
if it's a symbolic link, gets resolved to the target, and the loop
iterates until we reach a real file. However, the destination folder
where the symbolic link or real file is created is computed in DESTDIR
only once, before this loop starts. Therefore, this loop works fine
when all symbolic links in the chain, and the real file all belong to
the same directory. But it doesn't do the correct thing when the
symbolic link and/or real file are in different folder.
An example is Crosstool-NG musl toolchains, where the dynamic loader
is in /lib/ld-musl*.so but points to ../usr/lib/libc.so. With the
current logic, we copy /lib/ld-musl*.so to /lib, but we also copy
libc.so to /lib instead of the expected /usr/lib.
This currently doesn't cause any problem because the musl dynamic
linker is manually created by the TOOLCHAIN_EXTERNAL_MUSL_LD_LINK
hook. However, this logic has a number of problems, so in a followup
commit, we are going to put the musl dynamic linker in
TOOLCHAIN_EXTERNAL_LIBS, which will cause it to be copied by
copy_toolchain_lib_root. But we obviously want the link and its target
to be copied to the right place, hence this fix.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move toolchainfile.cmake and Buildroot.cmake from
$(HOST_DIR)/usr/share/buildroot to $(HOST_DIR)/share/buildroot.
Build-tested with a bunch of cmake packages.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We currently use $(HOST_DIR)/usr as the prefix for host packages. That
has a few disadvantages:
- There are some things installed in $(HOST_DIR)/etc and
$(HOST_DIR)/sbin, which is inconsistent.
- To pack a buildroot-built toolchain into a tarball for use as an
external toolchain, you have to pack output/host/usr instead of the
more obvious output/host.
- Because of the above, the internal toolchain wrapper breaks which
forces us to work around it (call the actual toolchain executable
directly). This is OK for us, but when used in another build system,
that's a problem.
- Paths are four characters longer.
To allow us to gradually eliminate $(HOST_DIR)/usr while building
packages, replace it with a symlink to .
The symlinks from $(HOST_DIR)/usr/$(GNU_TARGET_NAME) and
$(HOST_DIR)/usr/lib that were added previously are removed again.
Note that the symlink creation will break when $(HOST_DIR)/usr
already exists as a directory, i.e. when rebuilding in an existing
output directory. This is necessary: if we don't break it now, the
following commits (which remove the usr part from various variables)
_will_ break it.
At the same time as creating this symlink, we have to update the
external toolchain wrapper and the external toolchain symlinks to go
one directory less up. Indeed, $(HOST_DIR) is one level less up than
it was before.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that all packages have been migrated to the new gettext logic, we
can remove the BR2_NEEDS_GETTEXT and BR2_NEEDS_GETTEXT_IF_LOCALE
variables.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This new boolean is true if the toolchain provides a built-in
full-featured implementation of gettext (glibc), and false if only a
stub implementation is provided (uclibc, musl).
This will be used in follow-up commits to decide whether libintl needs
to be built by gettext or not.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
