Fixes static linking of berkeleydb package, where ltmain.sh
is not in the sub-directory that contains configure.
Always search the complete source directory.
Fixes:
http://autobuild.buildroot.net/results/f0a96f671644d9f9efcf245b354affdc84f7d7da
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 1ffcf364b6 updated cmake to 3.7.0,
which requires selecting the libuv package. At the time, the libuv
package only depended on BR2_TOOLCHAIN_HAS_THREADS. However, later on,
it was changed in master to depend on BR2_TOOLCHAIN_HAS_THREADS_NPTL, a
change which was not taken into account in the cmake 3.7.0 bump that was
merged in the next branch.
Due to this, builds of cmake is attempted on architectures that don't
provide NPTL thread support, causing a build failure. This commit fixes
that by adjusting the dependency.
Fixes:
http://autobuild.buildroot.net/results/16a5e1cbb57c0124537c4f3dc0807ba1eaa975ec/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot references powerpc64 little endian as BR2_powerpc64le and not
BR2_powerpc64el.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This toolchain uses GCC 4.8.x, which doesn't support the ARMv8 cores.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
a72 support was only added in the 5.1 cycle.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Notice: A53/A57 were in fact supported in aarch64 mode in 4.8 (in aarch32
mode only from 4.9), but it doesn't handle --with-abi, and as there is
unlikely to be any aarch64 based legacy projects unwilling to use a newer
GCC version it is simpler to disallow it for all modes.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit f71a621d91, we are using the
SED variable in the main Makefile. However, this variable is only
defined in package/Makefile.in, which gets included only when a
configuration is defined.
This means that, if you do:
$ make menuconfig savedefconfig
without a configuration defined, it fails with:
/bin/bash: /BR2_DEFCONFIG=/d: No such file or directory
Makefile:898: recipe for target 'savedefconfig' failed
make[1]: *** [savedefconfig] Error 127
This issue affects users of the "buildroot-submodule" project, which
does menuconfig+savedefconfig automatically. They worked around this
issue in commit
d12676b608,
but really "make menuconfig savedefconfig" should work out of the box.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream has dropped SDL support for ffplay in favor of SDL2.
This results in silently not building ffplay even if it is selected
in Buildroot config.
[Peter: propagate !static dependency from sdl2]
Signed-off-by: Phil Eichinger <phil@zankapfel.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit add a stack of small patches that make sysklogd build fine
with the musl C library. Build with uClibc and glibc has been tested
with those patches applied as well.
The first patch is slightly rework (better description and capital
letter to the title) in preparation for upstream submission.
Fixes:
http://autobuild.buildroot.net/results/8fa2bf73f983330884bce2e5ac31e01dee112ba9/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new package currently installs the "rpiboot" utility, which is
needed to access via USB mass storage the built-in eMMC of Raspberry Pi
compute modules.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tom privately notified that he is not able to support the packages he
originally added in Buildroot, so this commit removes him from the
DEVELOPERS file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Linaro toolchains are currently only available on ARMv7-A, but can
in fact also be used to generate 32 bits code for ARMv8 platforms. This
commit therefore adjusts their architecture dependency.
Example, a 32 bits ARM build produces a 32 bits busybox binary:
$ file output/target/bin/busybox
output/target/bin/busybox: setuid ELF 32-bit LSB executable, ARM, EABI5 version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-armhf.so.3, for GNU/Linux 2.6.32, BuildID[sha1]=16a7a70eb9cac08759e52a260478b9c287f59238, stripped
Which was built for Cortex-A72:
$ ./output/host/usr/bin/arm-linux-gnueabihf-readelf -A output/target/bin/busybox
Attribute Section: aeabi
File Attributes
Tag_CPU_name: "Cortex-A72"
Tag_CPU_arch: v8
Tag_CPU_arch_profile: Application
Tag_ARM_ISA_use: Yes
Tag_THUMB_ISA_use: Thumb-2
Tag_FP_arch: FP for ARMv8
Tag_ABI_PCS_wchar_t: 4
Tag_ABI_FP_rounding: Needed
Tag_ABI_FP_denormal: Needed
Tag_ABI_FP_exceptions: Needed
Tag_ABI_FP_number_model: IEEE 754
Tag_ABI_align_needed: 8-byte
Tag_ABI_align_preserved: 8-byte, except leaf SP
Tag_ABI_enum_size: int
Tag_ABI_VFP_args: VFP registers
Tag_CPU_unaligned_access: v6
Tag_MPextension_use: Allowed
Tag_Virtualization_use: TrustZone and Virtualization Extensions
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add two popular ARM64 cores to the list of supported cores: Cortex-A57
and Cortex-A72.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adds the Cortex-A53 CPU to the target architecture variant choice. This
sets the toolchain to use Cortex-A53 as the target. The effect is that
various Cortex-A53 tunings are enabled for the compilation of packages.
Signed-off-by: Matt Flax <flatmax@flatmax.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There's currently only one widely supported ABI for ARM64, called lp64,
so we define BR2_GCC_TARGET_ABI to the appropriate value.
Note that there is another ABI for ARM64 being worked on, ilp32, but its
support is not fully upstream in the kernel, so we're not adding support
for it for the moment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ARMv8 cores have a mandatory FPU unit called FP-ARMv8, so we:
- add a new hidden Config.in option for the availability of this
unit (BR2_ARM_CPU_HAS_FP_ARMV8)
- allow the selection of a possible choice in the "Floating point
strategy", and add two new choices: BR2_ARM_FPU_FP_ARMV8 and
BR2_ARM_FPU_NEON_FP_ARMV8.
- specify the -mfpu values for BR2_ARM_FPU_FP_ARMV8 and
BR2_ARM_FPU_NEON_FP_ARMV8 cases, when used on ARM 32 bits (-mfpu
doesn't exist on ARM64, instead -mcpu modifiers are used, so they
will be added on a per-core basis).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[yann.morin.1998@free.fr: drop the FP strategy dependency]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The floating point strategy currently depends on EABI || EABIHF. The
reason was that, wayback when we also supported OABI, we only exposed FP
for EABI or EABIHF, and hide it for OABI, which did not support FP.
It's been a while now that we do not support OABI, but the dependency
stuck all along.
Remove it as it is no longer needed, and is always true.
However, the choice is empty for AArch64, as we still have no entry for
their floating point strategy yet.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to prepare the addition of ARM64 cores, add the blind
BR2_ARM_CPU_ARMV8 option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Until now the "Target Architecture Variant" choice was not visible on
AArch64. In order to prepare the addition of the 64 bits core to this
choice, this commit adds a "depends on !BR2_ARCH_IS_64" dependency to
all currently supported cores (that are 32 bits only).
Following this commit, the "Target Architecture Variant" choice appears
on AArch64, but is for now empty.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 64 bits ARM processors are capable of running 32 bits ARM code, and
some platforms are indeed using this capability. Due to this, if we were
to keep the separation between Config.in.aarch64 and Config.in.arm, we
would have to duplicate the definition of all 64-bits capable ARM cores
into both files.
Instead of going down this route, let's take the same route as the x86
one: a single Config.in.x86 file, used for both x86 32 bits and x86 64
bits, with the appropriate logic to only show the relevant cores
depending on which architecture is selected.
In order to do this, we:
- Make the "ARM instruction set" choice only visible on ARM 32 bits,
since we currently don't support ARM vs. Thumb on AArch64.
- Add the relevant values for the BR2_ARCH option.
- Add the relevant values for the BR2_ENDIAN option.
- Make the "aapcs-linux" BR2_GCC_TARGET_ABI value only used on ARM 32
bits, since this ABI doesn't mean anything on AArch64.
- Make the BR2_GCC_TARGET_FPU option depends on ARM 32 bits, since
there is no -mfpu option on AArch64.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current VIM_REMOVE_DOCS hook removes all .txt files from
/usr/share/vim. Unfortunately, this also removes the rgb.txt file,
which is needed at runtime for vim, as reported in bug #9466.
This commit changes VIM_REMOVE_DOCS to remove only
/usr/share/vim/vim*/doc/. Size-wise, it's equivalent because:
- We are no longer removing a few README.txt in other directories,
taking more space.
- We are now removing the /usr/share/vim/vim*/doc/ folder entirely,
which contained a few files not named *.txt
So overall, the size of /usr/share/vim/ before and after this patch is
still 11MB.
Fixes bug #9466.
Reported-by: Mateusz Furdyna <sir.ferdek@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Many (100+) packages supported by buildroot contain old configure
scripts (or build them from old versions of autotools) that are unable
to determine how to link shared libraries on powerpc64 and
powerpc64le. This causes that test to erroneously fail on toolchains
that are not "bi-endian" (which is the case for toolchains built by
buildroot), which causes configure to build static libraries instead
of dynamic ones. Although these builds succeed, they tend to cause
linker failures in binaries later linked against them.
Because affected configure files can be discovered automatically, this
patch introduces a hook (enabled only when building for powerpc64 and
powerpc64le) that uses a script to scan and fix each package.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package adds missing WebDAB commands to NGINX. So, it makes sense
iff Nginx is compiled with the WebDAV support.
Fixes:
http://autobuild.buildroot.net/results/6e997faf553dc70d0aa1ee811fd669650349cba2/
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
[Thomas: fix indentation, add autobuilder reference.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package adds XSS and SQLi protection to Nginx HTTP server.
So, it makes sense iff the HTTP part of nginx is enabled.
Fixes:
http://autobuild.buildroot.net/results/1df67325f11a6f1c88d0c9cc5f4feab0b57bc2a6/
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
[Thomas: fix indentation, add autobuilder reference.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
efivar uses dlfcn.h which is not available in static builds
configuration. Also propagate dependency to efibootmgr. This commit
also does s/requires/needs/ in comment while at it.
Fixes:
http://autobuild.buildroot.net/results/ab3/ab32ccacfac2e65e1fcb307058d06c3d0122979d/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes a crash issue with smoothtime directive.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
dev->trans_start was replaced by netif_trans_update helper in kernel
4.7 by commit 860e9538a9482bb84589f7d0718a7e6d0a944d58.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Rebase existing patches
- Use a "menu" instead of "choice" to select Ethernet Powerlink
Drivers since we can now build several kernel modules at once.
- Select the Intel 82573 driver by default.
- Disable library with simulation interface.
- Disable zynq/FPGA (PCIe) interface otherwise the kernelpcp library
is always build.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[Thomas: minor Config.in tweaks.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The same thing was done in upstream commit 220d7a2f "QtGui module only
needed by Windows", though it was done differently upstream.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit moves the logic that allows to enable the naxsi external
module below the "external modules" comment, which was already used for
the upload and dav-ext modules.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Nginx built-in support for webdav is missing support for two commands:
PROPFIND and OPTIONS. This commit adds a new package that provides an
external nginx module with improved webdav support.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
[Thomas:
- Remove the BR2_PACKAGE_NGINX_HTTP_DAV_EXT_MODULE sub-option of the
nginx package. The BR2_PACKAGE_NGINX_DAV_EXT option is sufficient.
- Move the nginx.mk code together with another external module being
enabled, nginx-upload.
- Add LICENSE and LICENSE_FILES variables.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Paul Brossier, the aubio maintainer, added a sha256 hash for the
Buildroot package. Thanks !
https://github.com/aubio/aubio/issues/77
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
TI provides a set of headers files and libraries useful in developing
firmware for real-time (PRU) cores embedded in some processors e.g.
AM3358. This package stages these files for any packages creating
PRU firmware.
Note: As per [1], use commit v4.0.2 to sync with common TI Linux
versions.
[1] http://e2e.ti.com/support/arm/sitara_arm/f/791/p/552190/2018113#2018113
Signed-off-by: Ash Charles <ash.charles@savoirfairelinux.com>
[Thomas:
- rename BR2_PACKAGE_PRU_EXAMPLES to BR2_PACKAGE_PRU_SOFTWARE_SUPPORT,
since the package directory name should match the Config.in option
for this package
- use select for BR2_PACKAGE_HOST_TI_CGT_PRU, and therefore add the
appropriate "depends on BR2_PACKAGE_HOST_TI_CGT_PRU_ARCH_SUPPORTS".]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
TI provides a binary code generation toolchain to develop firmware for
the programmable real-time unit/co-processor found in some SOCs such as
some models in the AM335x line. This toolchain includes C/C++ support
(clpru) rather than just assembler (pasm) supported by the pre-existing
am335x-pru-package [1]. Following the lead of the Yocto meta-ti
layer [2], this package provides a host toolchain suitable for an x86
(or x86_64) Linux targeting an ARM-based PRU core.
[1] http://processors.wiki.ti.com/index.php/PRU_Assembly_Instructions#pasm_vs._clpru
[2] http://git.yoctoproject.org/cgit/cgit.cgi/meta-ti/tree/recipes-ti/devtools/ti-cgt-pru_2.1.1.bb
Signed-off-by: Ash Charles <ash.charles@savoirfairelinux.com>
[Thomas: add BR2_PACKAGE_HOST_TI_CGT_PRU_ARCH_SUPPORTS boolean option,
so that packages selecting host-ti-cgt-pru can easily inherit its
architecture dependencies.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump the kernel to the next commit which fix the build with gcc6.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Francois Perrad <francois.perrad@gadz.org>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
