Initial patch to start reproducibility testing.
Also enable tar filesystem to compare images since diffoscope works well
with tar.
Signed-off-by: Atharva Lele <itsatharva@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Instead of stdout where it gets mixed with the normal output, confusing
software parsing the output (E.G. get-developers -e as git sendemail.ccCmd).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The XS modules have a high propability to fail (compared to Pure Perl modules),
so it is valuable to check XS dependencies before the check of the main module.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It is possible to generate one-line config for the package just by
normalize it to the form:
BR2_PACKAGE_${pkg_replaced-to_and_uppercase}
it simplifes a bit of testing package where no additional config options
are needed.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some python packages seem to use underscores in inconsistent ways. We can
attempt to normalize these by always using dashes for the buildroot name and
attempting to autodetect the correct metadata name format.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For details, see https://github.com/snyk/zip-slip-vulnerability
Older python versions do not validate that the extracted files are inside
the target directory. Detect and error out on evil paths before extracting
.zip / .tar file.
Given the scope of this (zip issue was fixed in python 2.7.4, released
2013-04-06, scanpypi is only used by a developer when adding a new python
package), the security impact is fairly minimal, but it is good to get it
fixed anyway.
Reported-by: Bas van Schaik <security-reports@semmle.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that Qt4 is removed, these fixups can be removed as well.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
For the general case, appending values to variables is OK and also a
good practice, like this:
|PACKAGE_VAR = value1
|ifeq ...
|PACKAGE_VAR += value2
or this, when the above is not possible:
|PACKAGE_VAR = value1
|ifeq ...
|PACKAGE_VAR := $(PACKAGE_VAR), value2
But this override is an error:
|PACKAGE_VAR = value1
|PACKAGE_VAR = value2
as well this one:
|ifeq ...
|PACKAGE_VAR += value1
|endif
|PACKAGE_VAR = value2
And this override is error-prone:
|PACKAGE_VAR = value1
|ifeq ...
|PACKAGE_VAR = value2
Create a check function to warn about overridden variables.
Some variables are likely to have a default value that gets overridden
in a conditional, so ignore them. The name of such variables end in
_ARCH, _CPU, _SITE, _SOURCE or _VERSION.
After ignoring these variable names, there are a few exceptions to this
rule in the tree. For them use the comment that disables the check.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Simon Dawson <spdawson@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently check-package only knows about ifeq/ifneq.
Add code to handle ifdef/ifndef as well.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently any exceptions for a check function need to be coded into the
check-package script itself.
Create a pattern that can be used in a comment to make check-package
ignore one or more warning types in the line immediately below:
# check-package Indent, VariableWithBraces
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This script currently uses "/usr/bin/env python" as shebang but it does
not really support Python3. Instead of limiting the script to Python2,
fix it to support both versions.
So change all imports to absolute imports because Python3 follows PEP328
and dropped implicit relative imports.
In order to avoid errors when decoding files with the default 'utf-8'
codec, use errors="surrogateescape" when opening files, the docs for
open() states: "This is useful for processing files in an unknown
encoding.". This argument is not compatible with Python2 open() so
import 'six' to use it only when running in Python3.
As a consequence the file handler becomes explicit, so use it to close()
the file after it got processed.
This "surrogateescape" is a simple alternative to the complete solution
of opening files with "rb" and changing all functions in the lib*.py
files to use bytes objects instead of strings. The only case we can have
non-ascii/non-utf-8 files being checked by the script are for patch
files when the upstream file to be patched is not ascii or utf-8. There
is currently one case in the tree:
package/urg/0002-urg-gcc6-fix-narrowing-conversion.patch.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Tested-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 62d5558f76 (utils/get-developers: make it callable from elsewhere
than the toplevel directory) tried to fix this by passing in the toplevel
directory when the DEVELOPERS file is parsed.
Unfortunately this is not enough, as E.G. also the paths listed in the
patches are relative to the toplevel directory, causing it to not match the
entries in the DEVELOPERS file.
In concept this can be fixed by also passing the toplevel directory to the
Developers class, but the simplest solution is just to chdir to the toplevel
Buildroot directory before calling any of the getdeveloperlib functions.
This does require us to finish parsing command line arguments (which opens
the provided patch files) to not get into trouble with relative paths to
patches before chdir'ing / initializing getdeveloperlib.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 62d5558f76.
This actually does not work, as patches contain paths relative to the
toplevel directory as well.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, if a user runs "make" while specifying a specific package
(IE: make -p foo), the Makefile logic skips checking to see if all the
dependencies are selected in the specified packages config file. This behavior
is useful to test simple packages which do not have "complex" dependencies.
However; if a developer uses test-pkg -p ${package_name} to check their package,
the package may pass all the checks, but would have otherwise failed with a
simple "make" because the developer may have failed to add a select line in
packages config file, even if there is a new dependency in the packages
Makefile.
Pass the environment variable "BR_FORCE_CHECK_DEPENDENCIES" to the Makefile in
the test-pkg script, and check it's value in the Makefile. If the value is
"YES" force checking for dependency issues.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For some packages, there's no need to add the _SOURCE variable, since
the name of the source file is the same as the name of the package
(like python-engineio). Hence, we'll add it to the .mk file only if
needed.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Move imports from six package after the standard modules. Resolves
pylint warnings.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently all random defconfigs which are used in autobuilder use size
optimizaion (-Os), since BR2_OPTIMIZE_S=y is the default.
Adding "-O2" optimization will give better test coverage.
In many cases software gets built with speed optimization rather than
size optimization. So let's add Level 2 optimizaion option to be
generated in random defconfigs, so we could be able to test how
packages are built with "-O2" in autobuilder.
Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit extends the scancpan script to automatically generate a
test for the Perl module, either if the Perl module uses native
library, or if it has more than one dependency.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We should use an empty prefix as we do not have any prefix.
Note that BR2_ is mere a convention.
Signed-off-by: Nasser Afshin <Afshin.Nasser@gmail.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When adding the custom BR2_WGET value in the configuration,
genrandconfig forgets to add a newline. Due to this, the next option
that is added is printed on the same line as BR2_WGET="", which causes
it to be ignored.
Due to this, in all builds, the line right after BR2_WGET was
ignored. It could have been BR2_ENABLE_DEBUG, BR2_INIT_BUSYBOX,
BR2_INIT_SYSTEMD, BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV,
BR2_STATIC_LIBS or BR2_PACKAGE_PYTHON_PY_ONLY depending on the
randomization.
Fix that by adding a proper newline at the end of the BR2_WGET option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some packages have archive name that is different from package name.
For example websocket-client's archive name is websocket_client-*.tar.gz.
scanpypi expects the temporary extract folder to be:
/tmp-folder/BR-package-name/PyPI-packagename-and-version
In the case of websocket-client package the real extraction folder
will be different from the expected one because of the '_' in the
archive file name.
Use archive file name instead of package name to specify the extraction
folder. As the version is already part of this file, we don't need to
specify it.
Bonus: remove obsolete "return None, None" as the function doesn't return
anything. OSError class doesn't provide "message" member, so replace it
with "strerror".
Fixes:
https://bugs.busybox.net/show_bug.cgi?id=11251
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, utils/scancpan always outputs what should be placed in
package/Config.in to include all Perl packages Config.in
files. However, in practice, this is only useful when a new package is
added. This commit adjusts this behavior so that what should be place
in package/Config for Perl packages is only displayed when scancpan
has produced a new Buildroot package for a Perl module.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This variable is needed for upgrading packages with scancpan.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The utils/diffconfig script works only on variables with the BR2_
prefix. This is OK for Buildroot [def]configs since this is the prefix
for all user-facing variables, but it prevents using the same script
to compare configs from kconfig-based packages.
Remove the BR2_ restriction, allowing usage such as:
./utils/diffconfig \
board/qemu/xtensa-lx60/linux.config \
board/qemu/xtensa-lx60/linux-nommu.config
Signed-off-by: Marcel Patzlaff <m.patzlaff@pilz.de>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
there are also runtime dependency
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
get-developers tries to open DEVELOPERS in the current directory, so it
breaks when calling it from elsewhere than the toplevel Buildroot directory.
Traceback (most recent call last):
File "../utils/get-developers", line 107, in <module>
__main__()
File "../utils/get-developers", line 26, in __main__
devs = getdeveloperlib.parse_developers(os.path.dirname()
File "/home/peko/source/buildroot/utils/getdeveloperlib.py", line 161, in parse_developers
with open(os.path.join(basepath, "DEVELOPERS"), "r") as f:
IOError: [Errno 2] No such file or directory: '/home/peko/source/buildroot/output-foo/DEVELOPERS'
Fix it by instead figuring out where the DEVELOPERS file is relative to the
location of get-developers (E.G. one level up).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Arnout:
- add realpath to support a symlinked get-developers script;
- pass devs_dir argument to check_developers() to support -c in subdir;
- convert basepath to absolute path to support -f option.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This fixes a syntax error introduced in bcf2ed5cc3.
Output before the patch:
$ ./utils/get-developers outgoing/*
File "./utils/get-developers", line 97
print dev
^
SyntaxError: Missing parentheses in call to 'print'. Did you mean
print(dev)?
Output after the patch:
$ ./utils/get-developers outgoing/*
git send-email --to buildroot@buildroot.org
Signed-off-by: Grégoire Delattre <gregoire.delattre@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When used without spdx_lookup the BSD licence cannot be
detected correctly because many Python packages just specify
BSD without the exact version in their metadata. So add a
special message warning the user instead of the licence id.
Bonus: fix typo.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
now, the output is reproductible
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
so, the output is reproductible
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When called with a list of patches, get-developers prints the entire git
send-email invocation line:
./utils/get-developers 0001-git-security-bump-to-version-2.16.5.patch
git send-email --to buildroot@buildroot.org --cc "Matt Weber <matthew.weber@rockwellcollins.com>"
This may be handy when creating an entire patch series and editing a cover
letter, but it does mean that this has to be explicitly executed and
get-developers cannot be used directly by the --cc-cmd option of git
send-email to automatically CC affected developers.
So add an -e flag to only let get-developers print the email addresses of
the affected developers in the one-email-per-line format expected by git
send-email, similar to how get_maintainer.pl works in the Linux kernel.
With this and a suitable git configuration:
git config sendemail.to buildroot@buildroot.org
git config sendemail.ccCmd "$(pwd)/utils/get-developers -e"
You can simply do:
git send-email master
To automatically mail the buildroot list and CC affected developers on
patches.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Only the host variant is added, needed as a build time dependency of
the target perl-file-sharedir package.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Only the host variant is added, which is needed as a dependency of
perl-module-build-tiny (host), itself needed for
perl-apache-logformat-compiler (target).
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Only the host variant is added, which is needed as a dependency of
perl-module-build-tiny (host), itself needed for
perl-apache-logformat-compiler (target).
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Only the host variant is added, which is needed as a dependency of
perl-module-build-tiny (host), itself needed for
perl-apache-logformat-compiler (target).
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
And warn to use $() instead.
For examples see [1] and [2].
In the regexp, search for ${VARIABLE} but:
- ignore comments;
- ignore variables to be expanded by the shell "$${}".
[1] http://lists.busybox.net/pipermail/buildroot/2018-July/225211.html
[2] 36305380db
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If a license file could be found, but license id couldn't be detected place
following warning into *.mk file:
FOO_LICENSE = FIXME: license id couldn't be detected
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, the stdout is consigned to oblivion, while the stderr is not
redirected at all. So, when the configuration under test redefines a
symbol, like is the case when testing busybox for example, there is an
ugly warning.
So, just redirect both stdout and stderr to the logfile.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some packages don't provide source archive but only a wheel file. In
this case download variable is not defined. So define this variable at
the very beginning and check whether it is None after searching for
source archives in the metadata.
Bonus: fix PEP8 issue with wrong indentation.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
https://pypi.python.org URL has been changed to https://pypi.org.
Package's JSON object now contains sha256 checksum, so use it
instead of locally computed one. Change comments in the hash
file accordingly.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In preparation for the removal of the Blackfin architecture, drop the
autobuilder toolchain configuration that was testing Blackfin.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The check-package script finds base_dir (= the Buildroot directory) and
cd's into it. To be able to support relative paths as arguments, it
first recalculates the arguments relative to base_dir.
However, if there is a symlink anywhere on the path to the
check-package script, the relative paths will be wrong. To solve this,
use realpath() instead of abspath(), so symlinks are resolved before
calculating the relative path.
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
During the latest Buildroot Developers meeting, we discussed that
test-pkg would perhaps be more widely used if it tested a smaller
subset of toolchains. Indeed, it currently tests 47 toolchains, which
takes very long to build. Several of the toolchain configurations are
quite similar, and it is perhaps not necessary for contributors to
test them all before submitting a package.
Therefore, this commit changes the test-pkg script to only test a
subset of the toolchain configurations by default. The N first
configurations of the CSV files are tested, where N is hard-coded in
the script. The CSV file has therefore been re-organized to have the
first N toolchains be the most important ones.
A -a/--all option is added to test with all toolchains, while a
-n/--number option is added to test with the first N toolchains, N
being passed on the command line.
Note that the list of toolchains (built in the "toolchains" shell
variable) is no longer sorted. Indeed, when the first N toolchains are
tested, we want them to be tested in the same order as they are listed
in the CSV file, as we are careful to order them in an interesting
order. We only sort when all toolchains are tested.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
package/Config.in, package/Config.in.host, package/x11r7/Config.in and
package/kodi/Config.in do not comply with the normal Config.in
indentation rules. However, this violation of the rule is legitimate, so
let's skip them in check-package for this specific indentation check.
This removes the last 2197 remaining warnings on Config.in files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Ricardo: rebase patch to use relative paths passed by the main script,
fix flake8 warnings, add package/Config.* to the list]
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Each line must fit in <tab><2 spaces><62 chars>.
The default width for textwrap.wrap() is 70, so explicit set it to 62.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
These files can benefit from this script to prevent common mistakes when
submitting patches.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The toolchain directory can benefit from this script to prevent common
mistakes when submitting patches.
In order to accomplish this:
Do not ignore anymore files from the toolchain/ directory.
Ignore this symbol:
- BR_LIBC: defined by the buildroot toolchain, used by gcc-final.mk.
Ignore toolchain/toolchain-external/pkg-toolchain-external.mk as it
declares a package infra and not a package itself.
Ignore toolchain/helpers.mk as it contains only helper functions.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This directory can benefit from this script to prevent common mistakes
when submitting patches.
In order to accomplish this:
Do not ignore anymore files from the linux/ directory.
Ignore missing LINUX_EXT_ prefix as the variables for linux extensions
do not use it.
Ignore this symbol:
- LINUX_EXTENSIONS: defined by each linux extension, used by
linux/linux.mk.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The filesystem types can benefit from this script to prevent common
mistakes when submitting patches.
In order to accomplish this:
Do not ignore anymore files from the fs/ directory.
Ignore fs/common.mk as it declares a package infra and not a package itself.
Register the ROOTFS_ as a valid prefix for variables.
Ignore these symbols:
- PACKAGES_PERMISSIONS_TABLE: defined either by packages through
pkg-generic or by filesystem types, used by fs/common.mk;
- SUMTOOL: defined by package mtd, used by filesystem jffs2;
- TARGETS_ROOTFS: defined by filesystem types, used in the main
Makefile.
Keep using loose checks that warn about common mistakes while keep the
code simple.
As a consequence the check functions do not differentiate between
packages and filesystems so the symbol PACKAGE_UBI would not generate a
warning for the ubi filesystem neither the symbol ROOTFS_MTD would
generate a warning for the mtd package. But those kind of mistakes are
not common and are obvious in the code review, unlike typos i.e.
ROOTFS_UBl or PACKAGE_MID that would be hard to see in the code review.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This directory can benefit from this script to prevent common mistakes
when submitting patches.
In order to accomplish this:
Do not ignore anymore files from the boot/ directory.
Ignore boot/barebox/barebox.mk as it declares a package infra and not a
package itself.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
These directories can benefit from this script to prevent common
mistakes when submitting patches.
In order to accomplish this:
Do not ignore anymore files from these directories.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently the script only checks files inside the package/ directory.
Upcoming patches will enable it for other directories.
In order to reliably test for file names, i.e. the Config.in in the base
directory, normalize the path of files to check to a relative path to
the base directory.
Rename the variable that holds the compiled regexp to better represent
its content and rearrange how it is declared to make easy to later add
new directories to check. As a consequence the files that declare
package infra types would not be ignored anymore, so create a new
variable to list the files intree to be ignored during the check. The
same variable will be used by upcoming patches to ignore other files.
Ignore pkg-*.mk and doc-asciidoc.mk since they are package infra files.
In order to not produce weird results when used for files outside the
tree (i.e. in a private br2-external) add an explicit command line
option (-b) that bypasses any checks that would make a file be ignored
by the path that contains it.
When in this out-of-tree mode, the user is responsible for providing a
list of files to check that do not contain files the script does not
understand, e.g. package infra files.
As a result of this patch, besides the known use:
$ ./utils/check-package package/new-package/*
someone with the utils/ directory in the path can now also run:
$ cd package/new-package/
$ check-package *
or
$ check-package -b /path/to/br2-ext-tree/package/staging-package/*
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 3a0c20c530 (scanpypi: add support for Python3) adapted the script
to work with python 3.x, but the shebang still said python2 making it
unlikely to work on systems without python 2.x.
Change it to just 'python' instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
check-package would flag tabs before a backslash ('\t\\'),
two spaces before a backslash (' \\') but would not flag a tab before space
before backslash ('\t \\'), allowing someone to bypass the check.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A number of autobuilder failures are due to the fact that autobuilder
instances use old distributions, with old SSL certificates, and
therefore wget aborts with an error "The certificate of `xyz.org' is
not trusted.".
In order to avoid such failures that are not very interesting in the
context of the autobuilders, we pass --no-check-certificate to
wget. The integrity of the downloaded files is anyway verified by the
hashes, and this is only meant to be used in the context of
testing/CI, not in production.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In commit ea9669fffa ("core: kill
DEPENDENCIES_HOST_PREREQ"), the core-dependencies make target was
removed, and is now named just "dependencies".
This broke the utils/genrandconfig script, and this commit intends to
fix that.
Since this script is part of the Buildroot tree, it is provided
together with Buildroot, so we don't need to support the legacy
core-dependencies target. Someone checking out an older Buildroot will
have a working setup, with support/dependencies exposing
core-dependencies and utils/genrandconfig using core-dependencies. The
only broken situation will be between
ea9669fffa and this commit, but that's
not a sufficient reason to add some backward compatibility code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix these warnings:
E401 multiple imports on one line
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix these warnings:
E129 visually indented line with same indent as next logical line
E302 expected 2 blank lines, found 1
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix these warnings:
E201 whitespace after '['
E202 whitespace before ']'
E501 line too long (138 > 132 characters)
-> isolate the common part of the external toolchain url in a variable
to make the long lines shorter and more readable.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
create_hash_file() used basename(licensefile) when it writes the entry for
the license file in the .hash, which is obviously not correct when license
file is locate in a sub directory.
Instead copy the logic from __create_mk_license() to strip the directory
prefix from the absolute filename instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The script was changed via modernize utility. The only manual
made part was the handling of StringIO.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When generating a random configuration, also check the host
dependencies for that configuration and error out if it fails.
This is mainly intended for the autobuilders, so they don't try to
build a configuration for which the necessary host packages are not
installed.
Instead of erroring out, we could also generate a different random
config. However:
- When called for the autobuilders, the autobuild-run script will
anyway just attempt another build. The only difference is that a
warning will be printed in this autobuild log now. This warning
is in fact quite useful to hint that the autobuilder could benefit
from intalling this additional host package.
- When called manually, the user may in fact want to install the
missing host package and continue with the saved random config.
Fixes:
http://autobuild.buildroot.net/results/d7c/d7c12e873a71fef1e0b5e19cfad45024050614e1http://autobuild.buildroot.net/results/a0a/a0a105c1ec2d0517112b02932a85831d4b597b9fhttp://autobuild.buildroot.net/results/96c/96cc6cedc64c777e993671204809599a1498472a
and many others...
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix these warnings:
E101 indentation contains mixed spaces and tabs
E128 continuation line under-indented for visual indent
E231 missing whitespace after ','
E261 at least two spaces before inline comment
E302 expected 2 blank lines, found 1
E305 expected 2 blank lines after class or function definition, found 1
W191 indentation contains tabs
Ignore these warnings:
E402 module level import not at top of file
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix these warnings:
E202 whitespace before ']'
E203 whitespace before ':'
E302 expected 2 blank lines, found 1
E305 expected 2 blank lines after class or function definition, found 1
E711 comparison to None should be 'if cond is None:'
E741 ambiguous variable name 'l'
F401 'sys' imported but unused
W391 blank line at end of file
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Ignore these warnings:
F401 'lib.ConsecutiveEmptyLines' imported but unused
And remove comments that are not needed anymore.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Depending on how setup.py reads requirements files empty elements can occur.
This patch takes care, that such elements will be ignored and don't crash
the scanpypi script.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Store the list of detected licence files in the main object and
automatically add their sha256 checksums when creating *.hash file.
Bonus: fix wrong indentation.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use spdx_lookup package to compare packages' license file texts
with SPDX database.
This feature is optional.
Bonus: fix wrong indentation.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of limiting it to the package under test, we run it globally.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When package installation fails it is good to know what happened.
Signed-off-by: Alexey Roslyakov <alexey.roslyakov@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
