Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Simon Dawson <spdawson@gmail.com>
Tested-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch is no longer necessary since strace-v4.5.15 which always
defines CTL_PROC. Specifically strace git commit
35a55785ea8ff44d214af52085e3a5ea624730aa.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The libpcap package contained some interesting attempts to support a
static-only build, but it was not working:
http://autobuild.buildroot.org/results/01038d3b970092d894d2bae80679247e65722785/build-end.log
In fact the configure.in of libpcap has provision to support
--enable-shared/--disable-shared, but the generated configure script
in the libpcap package has not been regenerated with the configure.in
changes.
So basically, enabling LIBPCAP_AUTORECONF=YES ensures that the
configure script gets generated, which brings us a working
--enable-shared / --disable-shared.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The autobuilders are falling over building lcdproc, with failures like the
following.
http://autobuild.buildroot.net/results/622b7da10be751c725ba25eb40102269790b4b03/build-end.log
As Thomas Petazzoni has pointed out, the compile command lines incorrectly
contain host header and library search paths, such as the following.
-I/home/peko/scratch/host/usr/include/freetype2
-L/home/peko/scratch/host/usr/lib -lfreetype
This patch changes the lcdproc package to pass the freetype installation
prefixes on the configure command line.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Except for architecture and processor names, buildroot uses capitalized
configuration names, so change the macro names for xtensa to follow that
standard.
Change the overlay file to have a subdirectory for each component
(gdb, binutils, gcc, etc.) to make it more future-prove.
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Busybox does partial linking of its modules before linking everything
together into the binary. Those partial links are done without the
standard libraries, but that also means -ltirpc can't be found. In
addition, this probably fails horribly with static linking (untested).
The problem is that the LDFLAGS are also used in the partial links.
So instead, use CFLAGS_busybox, which is only used for the busybox
link step. Also make sure that this is passed through the environment,
not on the command line, so the busybox Makefile can still append to
it.
Fixes e.g.
http://autobuild.buildroot.net/results/e8351e3ba86fdcdb2999548658271a6fde0526a9
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order to solve
http://autobuild.buildroot.org/results/34f6843137efda20626af72714c110280ec577d7/build-end.log,
this patch makes the D-Bus package as well as all the packages that
select the D-Bus package 'depends on BR2_USE_MMU'.
In addition, for the specific case of gvfs, the missing
BR2_TOOLCHAIN_HAS_THREADS dependency is added (threads are required by
D-Bus, so they are also required by gvfs which selects D-Bus).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
uClibc pretends to implement <fenv.h> as it installs the header, but
in practice, it only implements the functions for i386. This makes gsl
unhappy as it detects fenv.h, but then cannot use the fenv functions.
Fixes:
http://autobuild.buildroot.org/results/732cc07faeca2a9098dc5106e8f654eb1323451a/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The 1.2 we were using doesn't build on ARM Thumb platforms:
http://autobuild.buildroot.org/results/94ef6be7dcb31021462e7313724217627d4b29df/build-end.log
Moreover, the 7.2 version is the one used by Debian/Ubuntu, and it has
been tested to build fine with the two packages that depend on
libatomic_ops: libdrm and pulseaudio.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
mesa3d now generates some C files at build time (related to the OpenGL
API) from XML files. This generation process is done using Python
scripts that require the libxml2 Python module.
Patch based on the initial work of Will Wagner (Thanks Will).
Signed-off-by: Vellemans Noel <noel.vellemans@visionbms.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Patch based on the initial work of Will Wagner (Thanks Will).
libxml2 host library with python support is required to build mesa3d (7.10.1)
Signed-off-by: Vellemans Noel <noel.vellemans@visionbms.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 3c90f75496 made Python use a
special ./configure command in order to avoid --enable-shared
--disable-static being passed, because it was causing issues when
building certain modules for a 64 bits system.
However, not having a shared libpython2.7 library for the host
prevents the libxml2 Python binding to get built.
So instead, we use the default configure command, but we add
--enable-static which is needed for Python to build correctly.
Note that we tested the build of Python on a 64 bits host as well as
the build of Python for a 64 bits target, and both went fine, with all
modules built properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
(Possibly) fixes#5354
The lua shared library patch was creating the shared library with
-nostdlib -lgcc for some unknown reason, which most likely is
the reason for the link issue reported in #5354.
Fix it by dropping these arguments, so gcc gets to figure out itself
what dependencies are needed.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
automake, autoconf, libtool and make on the target are basically
useless if we don't support building a toolchain on the target. Of
course, the host variant of automake, autoconf and libtool will remain
available.
[Peter: fixup to apply after perl change]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes multiple security isssues, most of them of the server component
though.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
cpanminus is currently responsible for about half of the autobuilder
failures, due to the missing dependency on host-qemu. However, even
with the host-qemu proposed by Arnout, cpanminus will still not work
properly: it will try to execute on the build machine executables
built for the target. While qemu is here to emulate the instruction
set, there is still the unsolved problem of kernel headers version
mismatch between the target and the build environments.
So the whole approach that consists in using host-qemu for building
simply cannot work properly, and until it is solved, the package
should be marked as broken.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
kexec only supports the following architectures.
i?86
powerpc
powerpc64
arm*
s390x|s390
sh4|sh4a|sh3|sh
mips*
cris
crisv32
ia64
x86_64
alpha
The Buildroot kexec package is available when an unsupported target
architecture is selected, leading to autobuild failures like the following.
http://autobuild.buildroot.net/results/e706b08abb4fd1987fc4aa970d6be50fc92dc1fa/build-end.log
This patch makes the kexec package available only for the supported
architectures.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove an lcdproc patch which has been rejected upstream. It has been
decided by lcdproc developer Markus Dolze that the behaviour of the
client_add_key command when handling the minus key is "intentional to
some degree."
This patch also takes the opportunity to remove the version number from the
single remaining lcdproc patch.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The lcdproc version bump to 0.5.6 has resulted in autobuilder failures such as
the following.
http://autobuild.buildroot.org/results/9967bc20a6094e836c4c18ff2cd30edef143bb8e/build-end.log
The 0.5.6 release added a new glcd driver, which requires the freetype and zlib
libraries. This patch makes the lcdproc package depend on freetype and zlib.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Note that libnfc has also switched from Subversion to Git.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixing linking time error with certain toolchains. The issue caused by a missing explicit linking to
libpthread. The failed buildlog:
Linking CXX executable testgenerictypes_exec
/home/buildroot12git/output/host/usr/lib/gcc/arm-buildroot-linux-uclibcgnueabi/4.6.3/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: /home/buildroot12git/output/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libQtCore.so: undefined reference to symbol 'pthread_cancel'
/home/buildroot12git/output/host/usr/lib/gcc/arm-buildroot-linux-uclibcgnueabi/4.6.3/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: note: 'pthread_cancel' is defined in DSO /home/buildroot12git/output/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/lib/libpthread.so.0 so try adding it to the linker command line
/home/buildroot12git/output/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/lib/libpthread.so.0: could not read symbols: Invalid operation
collect2: ld returned 1 exit status
make[3]: *** [templates/tests/testgenerictypes_exec] Error 1
make[3]: Leaving directory `/home/buildroot12git/output/build/grantlee-0.2.0'
make[2]: *** [templates/tests/CMakeFiles/testgenerictypes_exec.dir/all] Error 2
make[2]: Leaving directory `/home/buildroot12git/output/build/grantlee-0.2.0'
make[1]: *** [all] Error 2
make[1]: Leaving directory `/home/buildroot12git/output/build/grantlee-0.2.0'
make: *** [/home/buildroot12git/output/build/grantlee-0.2.0/.stamp_built] Error
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Xtensa is a configurable processor architecture, which allows to define
additional instructions and registers. The required variant specific
information for the toolchain is delivered in an 'overlay' file, which
needs to be 'untarred' to the corresponding directories after the
source is installed and patched.
This patch provides support for binutils, gcc, and gdb with a very
limited changes to the build scripts. These additions are only executed
for the Xtensa architecture and have no effect on other architectures.
[Thomas: rebased on top of the 'arch: improve definition of gcc mtune,
mcpu, etc.' patch, and changed 'Target ABI' to 'Target Architecture
Variant'].
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Xtensa architecture had been removed because it required special
handling and depended on additional directories and files that became
obsolete over time. This change is more aligned to other architectures.
[Thomas: rebased on top of the "arch: improve definition of gcc mtune,
mcpu, etc." patch].
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: reformat Config.in to fit 80-col]
Signed-off-by: Wojciech M. Zabolotny <wzab01@gmail.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since perl no longer requires host-qemu, autoconf and automake work
again on the architectures that are not supported by host-qemu.
This reverts commit c65d92e8e2.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes the following build failure:
extra/checksum.c:16:25: fatal error: netinet/ip6.h: No such file or directory
compilation terminated.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
uClibc doesn't provide NSS support, so we shouldn't try to include nss
related headers or call nss related functions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libtirpc does not implement the reentrant function getrpcbynumber_r(),
so allow quota to use the non-reentrant version getrpcbynumber(). This
should not be a problem as quota tools are not multi-threaded.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libtirpc does not implement the reentrant function getrpcbynumber_r(),
so allow nfs-utils to use the non-reentrant version
getrpcbynumber(). This should not be a problem as nfs-utils tools are
not multi-threaded.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As we will need to add more patches to nfs-utils, we need a correct
ordering when applying patches. Therefore, reformat the patches to use
a git format and git naming.
The nfs-utils-dont-mix-flags.patch is no longer needed as it was
patching Makefile.in files that were being regenerated due to the
package having _AUTORECONF = YES. The Makefile.in are properly
regenerated thanks to the nfs-utils-0002-Patch-taken-from-Gentoo.patch
patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When uClibc has RPC support, it is not needed to define the 'struct
rpcent' structure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libtirpc-0005-rpcent-mark-getrpcbyname-name-argument-as-const-char.patch
fixes build failures like
http://autobuild.buildroot.org/results/7a3a751fe02c639ca75c575ca7fe20a72372b8d6/build-end.log.
libtirpc-0006-rpcent-remove-prototypes-of-reentrant-variants.patch
ensures that functions not implemented by libtirpc are not described
in a header file. It also allows to remove those prototypes that were
not matching the functions available in glibc or uClibc, causing
mismatch in prototypes.
libtirpc-0007-doc-Makefile.am-fix-out-of-tree-installation.patch is a
minor fix.
The following patches (8 to 9) allow libtirpc to provide sufficient
things to be able to build rpcbind on top of it.
All these patches have been submitted upstream on the libtirpc-devel@
mailing list.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The patch numbers in [PATCH x/y] are quite useless within the context
of Buildroot, and generate noise when patches are re-ordered.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
