Buildroot documentation section 9.2.1.6 "Additional kernel extensions"
indicates support for kernel extensions defined in external buildroot
trees but unfortunately, there didn't seem to be any support in
br2-external script.
This patch copies 'init' code support to include external kernel
extensions defined in 'linux' dir at the br2-external root directory as
explained in documentation.
Signed-off-by: Nicolas POIROT <ni.poirot@laposte.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This Bootlin toolchain has been available for a while, but was not
supported until now.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
These toolchains have been marked obsolete by toolchains.bootlin.com
as they are replaced by the mips64-n32 toolchains. See commit:
121e78806b
Will allow to fix:
http://autobuild.buildroot.net/results/d13b35ba5a0f68f72e6592bdd9218b625a3c6554/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The "arches" dict lists the architectures for which Bootlin toolchains
are available, along with the corresponding Buildroot conditions for
those architecture variants.
However, there is nothing that checks that such architectures really
have Bootlin toolchains available. Even if no toolchain is available,
the architecture is considered as support, and will be listed in the
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARCH_SUPPORTS option, making menuconfig
believe that some Bootlin toolchain is available for the selected
architecture variant.
This is currently the case with the "mips64" architecture (as
identified by the Bootlin toolchains project). Such toolchains have
been made obsolete in toolchains.bootlin.com and replaced by the
mips64-n32 toolchains. But "mips64" is still listed in "arches",
causing this architecture to be considered as having Bootlin
toolchains available.
To avoid this to happen in the future, this commit adds a check that
verifies that an architecture listed in "arches" really has at least
one toolchain available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The microblazeel, microblazebe and openrisc toolchains need to select
this option as they don't have any gdb/gdbserver.
Helps in fixing:
http://autobuild.buildroot.net/results/6315ef7b66ee4ae8f870c92186bc674d65f62f2c/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The Bootlin i686 toolchain was already made available only on BR2_i386
with !BR2_x86_i486 && !BR2_x86_i586 && !BR2_x86_1000. However, this
was not sufficient as a few other architecture variants of BR2_i386
are "lower" than i686, and they need to be excluded as well.
Allows to fix:
http://autobuild.buildroot.net/results/56ac1a8fa5b34a9ca10eef98ae9fb090b8c762c4/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The current description of the Bootlin ARM toolchains allows them to
be selected for ARM big endian configurations, which obviously doesn't
work as these Bootlin ARM toolchains are little endian only.
We fix this by adding BR2_arm in the list of conditions for those
toolchains.
Will allow to fix:
http://autobuild.buildroot.net/results/7befbb686bb972016ba4e742976dcdb3fed1be11/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We now support both MMU-enabled and MMU-less RISC-V 64-bit
configurations. However, the Bootlin toolchain for RISC-V 64-bit only
supports MMU-enabled configurations, but the current logic in
toolchain/toolchain-external/toolchain-external-bootlin/ does not take
this into account, and allows selecting the Booltin toolchain for
MMU-less RISC-V 64-bit configurations.
To fix this, the gen-bootlin-toolchains script is modified to add the
BR2_USE_MMU dependency to the description of the RISC-V 64-bit
toolchain.
However, the BR2_USE_MMU dependency was also added for glibc and musl
toolchains unconditionally, so to avoid duplicating the dependency, we
now only add it only if not already present in the list of
dependencies for this toolchain.
This will allow to fix:
http://autobuild.buildroot.net/results/d6aee9b275b1ec399aea59758ac8f69fdc5691fc/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The Config.in options created for each toolchain were properly taking
into account the !BR2_STATIC_LIBS dependency of glibc
toolchains. However, this dependency was not taken into account into
the main BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARCH_SUPPORTS
option. Consequently, if an architecture is only supported by glibc,
but BR2_STATIC_LIBS is enabled, the main "Bootlin toolchain" option
was visible... but with no selectable toolchain.
We fix this by making sure that
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARCH_SUPPORTS is only true for all
architectures supported, taking into account the fact that some
architectures can only be supported if !BR2_STATIC_LIBS, when the only
available C library is glibc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some constraints on a setup ended up with a plus sign in the path
for historical reasons and would then fail to match on the comparison
of the host/lib dir match. So, the =~ for bash can be augmented
with a double quote expansion to preserve the literal value of
the characters in the variable.
Example Path: /home/vagrant/test+buildroot/per-package
Signed-off-by: Charles Hardin <ckhardin@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
pkg-stats currently uses the services from support/scripts/cpedb.py to
match the CPE identifiers of packages with the official CPE database.
Unfortunately, the cpedb.py code uses regular ElementTree parsing,
which involves loading the full XML tree into memory. This causes the
pkg-stats process to consume a huge amount of memory:
thomas 1310458 85.2 21.4 3708952 3450164 pts/5 R+ 16:04 0:33 | | \_ python3 ./support/scripts/pkg-stats
So, 3.7 GB of VSZ and 3.4 GB of RSS are used by the pkg-stats
process. This is causing the OOM killer to kick-in on machines with
relatively low memory.
This commit reimplements the XML parsing needed to do the CPE matching
directly in pkg-stats, using the XmlParser functionality of
ElementTree, also called "streaming parsing". Thanks to this, we never
load the entire XML tree in RAM, but only stream it through the
parser, and construct a very simple list of all CPE identifiers. The
max memory consumption of pkg-stats is now:
thomas 1317511 74.2 0.9 381104 152224 pts/5 R+ 16:08 0:17 | | \_ python3 ./support/scripts/pkg-stats
So, 381 MB of VSZ and 152 MB of RSS, which is obviously much better.
The JSON output of pkg-stats for the full package set, before and after
this commit, is exactly identical.
Now, one will probably wonder why this isn't directly changed in
cpedb.py. The reason is simple: cpedb.py is also used by
support/scripts/missing-cpe, which (for now) heavily relies on having
in memory the ElementTree objects, to re-generate a snippet of XML
that allows us to submit to NIST new CPE entries.
So, future work could include one of those two options:
(1) Re-integrate cpedb.py into missing-cpe directly, and live with
two different ways of processing the CPE database.
(2) Rewrite the missing-cpe logic to also be compatible with a
streaming parsing, which would allow this logic to be again
shared between pkg-stats and missing-cpe.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- add missing import of requests
- import CPEDB_URL from cpedb, instead of duplicating it
- fix flake8 errors
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some upstream sites are very slow to respond, and the default timeout
of 300 seconds of the aiohttp.ClientSession() is too long. Let's
reduce it to 15 seconds.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is useful when debugging/developing the pkg-stats script.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is useful when debugging/developing the pkg-stats script.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit adds support for a new type of graph, showing the timeline
of a build. It shows, with one line per package, when each of this
package steps started/ended, and therefore allows to see the
sequencing of the package builds.
For a fully serialized build like we have today, this is not super
useful (except to show that everything is serialized), but it becomes
much more useful in the context of top-level parallel build.
We chose to order the graph by the time-of-configure, as it is the
closest to the actual cascade-style of a true dependency graph, which is
tiny bit more complex to achieve properly. The actual result still looks
pretty good.
The graph-build make target is extended to also generate this new
timeline graph.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- sort by start-of-configure time
- re-use existing colorsets (default or alternate)
- fix python2isms
- fix check-package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The check_package_get_latest_version_by_distro() function analyzes the
data returned by release-monitoring.org. For two of our
packages (bento4 and qextserialport), release-monitoring.org returns
something that is a bit odd: it returns an entry with a
"stable_versions" field that contains an empty array. Our code was
ready to have or not have a "stable_versions" entry, but when it is
present, we assumed it was not an empty array. These two packages, for
some reason, break this assumption.
In order to solve this problem, this commit is more careful, and uses
the stable_versions field only if it exists and it has at least one
entry. The code is also reworked as a sequence of "if...elif...else"
to be more readable.
This fixes the following exception when running pkg-stats on the full
package set:
Task exception was never retrieved
future: <Task finished name='Task-10772' coro=<check_package_latest_version_get() done, defined at ./support/scripts/pkg-stats:532> exception=IndexError('list index out of range')>
Traceback (most recent call last):
File "./support/scripts/pkg-stats", line 535, in check_package_latest_version_get
if await check_package_get_latest_version_by_distro(session, pkg):
File "./support/scripts/pkg-stats", line 489, in check_package_get_latest_version_by_distro
version = data['stable_versions'][0] if 'stable_versions' in data else data['version'] if 'version' in data else None
IndexError: list index out of range
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: non-sequence tests as True]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 471ecea5ee (core/show-info: 'name' only applies to packages)
removed the 'name' field for rootfs (really, for non-package) entries,
thus breaking the pkg-stats processing.
We fix that by excluding any entry that has no 'name', on the assumption
that if it has no name, it is not a package.
Reported-by: Xogium on IRC
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This adds pep517(needed for flit-core to build itself) and flit python
package types.
We need to add an installer script and pass it appropriate options for
installing pep517 wheels generated by python-pypa-build during the
build stage. Unfortunately it seems pep517 does not support builds
without using the wheel format.
We also need to add a patch fixing the version parser in flit-core.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[Arnout:
- fix indentation in pkg-python.mk (tabs, not spaces);
- use the new _CMD variables instead of duplicating the entire _CMDS
definitions;
- no need to filter dependencies (they're not self-referencing);
- _NEEDS_HOST_PYTHON no longer exists;
- host-python-pypa-build gets added to DEPENDENCIES automatically.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
... so we can catch regressions on check-package.
Update to the new docker image that was pushed after the previous
commit.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some software decides based on uid/gid whether a user is a system or
normal (human) user, with different behaviour for those flavors (example
journald [2]).
So adding logic to create system-users is necessary, we take the now
common ranges from [1].
This extends the mkusers script to allow -2 for uid/gid, this argument
will take an identifier from the user range. All identifiers used up to
now should have been from the system range, so -1 is now interpreted as
a system user/group.
Note that after this commit, all the UIDs and GIDs that are created
automatically (with -1) will change. That means if there is peristent
data on an existing system that was created by such an automatic user,
it will suddenly belong to a different user. However, this could already
happen before: if a USERS line is added to a package, then other UIDs
may change as well.
Add system/user ranges as variables, and the argument for user/system
uid variable as well. Thus some magic constants could be removed, some
further occurences of -1 were replaced with equivalent logic. For
consistency, the existing MIN/MAX_UID/GID variables are renamed to
FIRST/LAST_USER_UID/GID.
Update the documentation with the new automatic ranges.
[1] - https://systemd.io/UIDS-GIDS/
[2] - https://www.freedesktop.org/software/systemd/man/journald.conf.html
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[Arnout: use -1 for system users; refactor the changes a bit]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The x86-64-v4 toolchain assumes availability of AVX512, as per the
definition of the x86-64-v4 "standard".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Following the merge of
d6ce2a1681 ("arch/Config.in.x86: add
option for -march=x86-64") and
eeace1cc13 ("arch/Config.in.x86: add support for
x86-64-v2, x86-64-v3, x86-64-v4"), bootlin.toolchains.com now provides
toolchains targetting the x86-64, x86-64-v2, x86-64-v3 and x86-64-v4
architecture variants.
This commits modifies gen-bootlin-toolchains to support these
toolchains. It should be noted that the description for the x86-64-v3
and x86-64-v4 toolchains are for now the same, as Buildroot doesn't
yet have the options to describe the extra features that x86-64-v4
expects to find on the hardware platform.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
support/scripts/pkg-stats:1171:8: E713 test for membership should be 'not in'
support/scripts/pkg-stats:1175:8: E713 test for membership should be 'not in'
support/scripts/pkg-stats:1179:8: E713 test for membership should be 'not in'
3 E713 test for membership should be 'not in'
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/1955772278
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When debugging pkg-stats, it's quite useful to be able to disable some
features that are quite long (checking upstream URL, checking latest
version, checking CVE). This commit adds a --disable option, which can
take a comma-separated list of features to disable, such as:
./support/scripts/pkg-stats --disable url,upstream
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The .affects() method of the CVE class in support/scripts/cve.py can
return 3 values: CVE_AFFECTS, CVE_DOESNT_AFFECT and CVE_UNKNOWN.
We of course properly account for CVEs where .affects() return
CVE_AFFECTS, but the ones for which CVE_UNKNOWN is returned are
currently ignored, and therefore treated as if they did not affect the
package.
However CVE_UNKNOWN in fact indicates that the v_start/v_end fields of
the CPE entry could not be parsed by
distutils.version.LooseVersion(). Instead of ignoring such cases, this
commit adds support for the concept of "unsure CVEs", which will be
listed next to CVEs known to affect the package, so that we are aware
of them and can investigate the version issue.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The commit [1] added a sed command used to retreive a pattern
to keep only defconfigs whose name start with the pattern.
"<foo>-defconfigs-<pattern>"
The sed command doesn't work as expected if <foo> contains a
single hyphen [2]:
"qemu-6.2.0-defconfigs-qemu"
Update the sed command to ignore completely the part before
"-defconfigs-".
[1] 65d2f04c01
[2] http://lists.busybox.net/pipermail/buildroot/2022-January/632507.html
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
-E flag instructs patch to remove empty files. However, in some cases
empty files are essential. If they are missing, build could be broken
or other bad things can happen.
Note that empty files are still removed when their headers are properly
formattedo: timestamp set to 1970-01-01T00:00:00Z, destination set to
/dev/null.
Signed-off-by: Andrey Nechypurenko <andreynech@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
toolchains.bootlin.com no longer provides a LP64 RISC-V 64-bit
toolchain, but a more useful LP64D RISC-V 64-bit toolchain. Of course,
the old tarballs remain available, but no new versions of the LP64
toolchain will be produced.
This commit reflects this change in the gen-bootlin-toolchains script.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Already supported:
- Pushing a branch called "<foo>-defconfigs" tests all defconfigs.
- Pushing a branch called "<foo>-defconfig-<defconfig-name>" will
test one particular defconfig
This commit adds support for:
- Pushing a branch called "<foo>-defconfigs-<pattern>" which will
test all defconfigs whose name start with the pattern. For example
"<foo>-defconfigs-qemu_" will test all Qemu defconfigs
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
It is possible that some users of buildroot have put it in a repository
and call into it from another Makefile such as:
.DEFAULT:
$(MAKE) O=$(abspath $(O)) -C buildroot $(@)
This technique works well except that Make tells us that it changes into
the buildroot directory:
make[1]: Entering directory 'buildroot'
Because this line doesn't have an equals within it, python raises a
ValueError exception within pkg-stats.
This patch has python tell the invoked make not to print directories
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The heuristic to extract the various variables of interest is pretty
crude: we filter on variables ending with certain suffixes (like
'%_VERSION' to get the version strings).
However, in doing so, we may dump variables that are not actual package
versions (especially with br2-external trees), and those may contain one
or more equal sign. And anyway, an actual package version string may
very well contain an equal sign too.
But the current situation is that the output of 'printvars' is split on
all equal signs, which will not fit in the 2-tuple we assign the result,
thus causing an exception.
Fix that by limiting to a single split.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently when a tag is added to the Buildroot git tree, the gitlab-ci
create a pipeline with several hundred of jobs (~750) to build all
defconfigs and execute the Buildroot testsuite.
However, there is only a limited number of gitlab-ci runner (9 runners)
and some jobs reach the timeout limit (24h) while waiting for a runner
[1]. Indeed, the Buildroot project doesn't use the Gitlab's shared
runners.
In addition to the pipeline created when a new tag is added to the
git repository, two pipelines are created each weeks to execute the
Buildroot testsuite (on monday [2]) and build all defconfigs (on
Thursday [3]).
At some point there are too many jobs waiting in gitlab due board
defconfigs builds. Indded a board defconfig requires a lot of time
(~30min) compared to other jobs in order to build a toolchain and a
kernel linux along with a basic rootfs. There is currently 262
defconfigs.
This is even worse when several pipelines are trigged at the same
time (new git tag and scheduled pipeline trigger).
In order to reduce the number of long jobs, don't build board
defconfigs with pipelines trigged on tag, keeping only the runtime
tests and the Qemu's defconfigs.
[1] https://gitlab.com/buildroot.org/buildroot/-/jobs/1758966541
[2] https://gitlab.com/buildroot.org/buildroot/-/pipelines/404035190
[3] https://gitlab.com/buildroot.org/buildroot/-/pipelines/401685550
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The current Gitlab CI mechanism allows to trigger all tests in a CI
pipeline by pushing a branch named <something>-runtime-tests, or to
trigger a single test in a CI pipeline by pushing a branch name
<something>-tests.<name of test>.
However, there are cases where it is useful to run a suite of tests,
for example to run all tests in tests.init.test_busybox.
This commit makes that possible by extending the current semantic of
<something>-tests.<name of test> to not expect a complete test name,
but instead to accept all tests that starts with the given pattern.
This allows to do:
git push gitlab HEAD:foobar-tests.init.test_busybox.TestInitSystemBusyboxRo
like it was the case before. But it now also allows to do:
git push gitlab HEAD:foobar-tests.init.test_busybox
to run all Busybox tests.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The pkg-stats script queries release-monitoring.org to find the latest
upstream versions of our packages. However, up until recently,
release-monitoring.org had no notion of stable
vs. development/release-candidate versions, so for some packages the
"latest" version was in fact a development/release-candidate version
that we didn't want to package in Buildroot.
However, in recent time, release-monitoring.org has gained support for
differentiating stable vs. development releases of upstream
projects. See for example
https://release-monitoring.org/project/10024/ for the glib library,
which has a number of versions marked "Pre-release".
The JSON blurb returned by release-monitoring.org has 3 relevant
fields:
- "version", which we are using currently, which is a string
containing the reference of the latest version, including
pre-release.
- "versions", which is an array of strings listing all versions,
pre-release or not.
- "stable_versions", which is an array of string listing only
non-pre-release versions. It is ordered newest first to oldest
last.
So, this commit changes from using 'version' to using
'stable_versions[0]'.
As an example, before this change, pkg-stats reports that nfs-utils
needs to be bumped to 2.5.5rc3, while after this patch, it reports
that nfs-utils is already at 2.5.4, and that this is the latest stable
version (modulo an issue where Buildroot has 2.5.4 and
release-monitoring.org has 2-5-4, this will be addressed separately).
Note that part of this change was already done in commit f7b0e0860, but
it was incomplete.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The pkg-stats scripts tries to match packages against
release-monitoring.org in two ways:
- First by using the "Buildroot" distribution registered on
release-monitoring.org, in which we have added a lot of mappings
between Buildroot package names and release-monitoring.org package
names. If there is a match using this distribution, the package
status is RM_API_STATUS_FOUND_BY_DISTRO, which means that the
resulting HTML has a "found by distro" statement.
- Then, if the first solution didn't work, by using the pattern
matching, as done in the check_package_get_latest_version_by_guess()
function.
However, there is a bug in this later case: it sets the package status
to RM_API_STATUS_FOUND_BY_DISTRO as well, while it should have been
RM_API_STATUS_FOUND_BY_PATTERN. Due to this bug, in the resulting HTML
file from a pkg-stats run, all packages are marked as "found by
distro" even the ones that are "found by guess".
This commit fixes that by setting the correct package status.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
For example with libpng: 1.6.37 instead of 1.7.0beta89
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[yann.morin.1998@free.fr: coalesce into a single line]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A recent update of flake8 in CI introduced a new check E741. It
basically checks that variables are at least 3 characters long. Up to
now, however, we have used shorter names in some places - all of them
turn out to be "l" for a line of text.
Replace all those "l" variables with "line".
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/1687009829
partially:
support/scripts/boot-qemu-image.py:47:21: E741 ambiguous variable name 'l'
support/scripts/check-dotconfig.py:20:38: E741 ambiguous variable name 'l'
support/scripts/size-stats:76:13: E741 ambiguous variable name 'l'
support/testing/tests/core/test_bad_arch.py:17:32: E741 ambiguous variable name 'l'
support/testing/tests/package/test_python_treq.py:10:30: E741 ambiguous variable name 'l'
support/testing/tests/toolchain/test_external.py:30:42: E741 ambiguous variable name 'l'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Python 2 is EOL sice 2020 [1], it's still available on distros, but may not
be installed by default (as being replaced by python3).
Thus remove compatibility imports:
from __future__ import print_function
from __future__ import absolute_import
Tested with python3 -m py_compile.
[1] https://www.python.org/doc/sunset-python-2/
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The gitlab-ci support in test-pkg allows to parallelize the test-pkg
work into several gitlab jobs. It's much faster than local serialized
testing.
To trigger this, a developer will have to add, in the latest commit of
their branch, a token on its own line, followed by a configuration
fragment, e.g.:
test-pkg config:
SOME_OPTION=y
# OTHER_OPTION is not set
SOME_VARIABLE="some value"
This configuration fragment is used as input to test-pkg.
To be able to generate one job per test to run, we need the list of
tests in the parent pipeline, and the individual .config files (one per
test) in the child pipeline. We use the newly-introduced --prepare-only
mode to test-pkg, and collect all the generated .config files as
artefacts; those are inherited in the child pipeline via the
"needs::pipeline" and "needs::job" directives. This is a bit tricky,
and is best described by the Gitlab-CI documentation [0].
We also list those .config files to generate the actual list of jobs to
run in the child pipeline.
Notes:
- if the user provides an empty fragment, this is considered an error:
indeed, without a fragment (and the package name), there is no way
to know what to test;
- if that fragment yields an empty list of tests, then there is
nothing to test either, so that is also considered an error.
[0] https://docs.gitlab.com/ee/ci/yaml/README.html#artifact-downloads-to-child-pipelines
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr:
- split the change to test-pkg to its own patch
- generate the actual yml snippet in support/scripts/generate-gitlab-ci-yml,
listing the .config files created by test-pkg
- some code-style-candies...
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- If a package doesn't have any versioning, ignore and state that
- If a package is virtual, CVE=ignore and CPE state virtual
- For any of these NA cases, don't provide search link and color box
green
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Matthew Weber <matthew.weber@collins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
has_valid_infra() is incorrectly named; it probably should be named
is_actual_package(), and has_valid_infra() would be changed to
actually represent having an actual infra.
This resolves packages reporting as having no valid package infra and
cleans up reporting cases of CPE and CVEs where there isn't a valid version
or package definition outside Buildroot
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Matthew Weber <matthew.weber@collins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently a verified CPE reports the following if versions are not found
cpe:2.3🅰️qemu:qemu:5.2.0:*:*:*:*:*:*:*
CPE identifier unknown in CPE database (Search)
This patch clarifies the report to state the 'version' is unknown instead
of the 'identifier'.
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Matthew Weber <matthew.weber@collins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, patches with renames are refused, as they reqire patch 2.7
or newer. So far, we did not require that version because it was too
recent to be widely available.
But patch 2.7 has been released in 2012, almost 9 years ago now; it is
old enough that we can start relying on it.
Add a check that patch is GNU patch 2.7 or newer, and so drop the common
check for patch, and drop the check about renames in apply-patches.sh.
Signed-off-by: Ryota Kinukawa <pojiro.jp@gmail.com>
[yann.morin.1998@free.fr:
- drop common check
- shorten variable names
- drop now-incorrect comment about busybox w/desktop
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When doing analysis it is helpful to be able to view what CVE have
been patched / diagnosed to not apply to Buildroot. This exposes
that list to the reporting and prevents a step where you have to
dig into the .mk's of a pkg to check for sure what has been
ignored.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[yann.morin.1998@free.fr: only set background if there are ignored CVEs]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
For cases of a CPE having a unknown version or when there hasn't
been a CPE verified, proposed a search criteria to help the
user research an update.
(libcurl has NIST dict entries but not this version)
cpe:2.3🅰️haxx:libcurl:7.76.1:*:*:*:*:*:*:*
CPE identifier unknown in CPE database (Search)
(jitterentropy-library package doesn't have any NIST dict entries)
no verified CPE identifier (Search)
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[yann.morin.1998@free.fr: fix flake8 issues]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This script queries the list of CPE IDs for the packages of the
current configuration (based on the "make show-info" output), and:
- for CPE IDs that do not have any matching entry in the CPE
database, it emits a warning
- for CPE IDs that do have a matching entry, but not with the same
version, it generates a snippet of XML that can be used to propose
an updated version to NIST.
Ref: NIST has a group email (cpe_dictionary@nist.gov) used to
recieve these version update and new entry xml files. They do
process the XML and provide feedback. In some cases they will
propose back something different where the vendor or version is
slightly different.
Limitations
- Currently any use of non-number version identifiers isn't
supported by NIST as they use ranges to determine impact
of a CVE
- Any Linux version from a non-upstream is also not supported
without manually adjusting the information as the custom
kernel will more then likely not match the upstream version
used in the dictionary
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
[yann.morin.1998@free.fr:
- codestyles as spotted by Arnout
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
