Currently, the packages are sorted smallest first, and biggest last
(with unknown and others second-to-last and last, resp.).
Add an option to invert the ordering (but keeping unknown and others at
their current positions).
This has the nice side effect that we can now control the colours
assigned to the biggest package(s), as the colours are cycled from the
first to the last. Currently, the biggest packages gets a redish colour,
which is appropriate, but the second gets a greenish one, which is not
as appropriate (but changing that can come later).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When dealing with embedded devices, storage is more often than not some
kind of flash device, on which the memory is usually counted as powers
of 1024 instead of powers of 1000. As such, people may prefer reports
using IEC prefixes [0] instead of the SI prefixes.
Add an option to that effect.
We use argparse's ability to use custom actions [1] [2], to provide a
set of options that act on a boolean, but has a single help entry and
internally ensures consistency of the settings. We could have been using
the more conventional store_true/store_false actions instead, but that
would have meant either two help entries, one for each set of options,
and/or some logic after parse_args() to check the validity of the
settings.
[0] https://en.wikipedia.org/wiki/Binary_prefix
[1] https://docs.python.org/2/library/argparse.html#action
[2] https://docs.python.org/2/library/argparse.html#argparse.Action
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, we group packages that contribute less then 1%, into the
"Other" category.
However, in some cases, there can be a lot of very comparatively small
packages, and they may not exceed this limit, and so only the "Others"
category would be displayed, which is not nice.
Conversely, if there are a lot of packages, most of which only so
slightly exceeding this limit, then we get all of them in the graph,
which is not nice either.
Add a way for the developers to pass a different cut-off limit. As for
the dependency graph which has BR2_GRAPH_DEPS_OPTS, add the environment
variable BR2_GRAPH_SIZE_OPTS to carry those extra option (in preparation
for more to come, later).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[Arnout:
- remove empty base class definition from Config;
- use parser.error instead of ValueError for invalid argument.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Briefly states what the output of this target is about.
Signed-off-by: Marcel Patzlaff <m.patzlaff@pilz.de>
[Thomas: improve wording]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add documentation about how a br2-external tree can provide an external
toolchain or a libjpeg or openssl alternative implementation.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This rule was added back in 9429e7b698 (core: introduce an intermediate
rule before the configurators) when the kconfig-side br2-external file
was generated separately from the Makefile-side one.
Now that they are generated together very early in the Makefile, we no
longer need this intermediate rule. Drop it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
[Peter: also drop outdated reference in the manual]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the two (all of them!) br2-external related files are generated
in the same location, it makes sense they are named after the same
pattern.
When initial support for (then single) br2-external trees was added back
in a4239f7fd1 (core: introduce the BR2_EXTERNAL variable), it was not
clear-cut why that file was not named with a br2 prefix.
So rename it now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Apparently, patchwork only recognizes the 'Fixes' tag if it is followed
by a colon. So make sure the manual documents it as such.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Meson does not allow to pass CFLAGS/LDFLAGS/CXXFLAGS via the environment
or via command-line arguments or options (instead, those flags from the
environment are passed to the host compiler, which is seldom what we
need). The only way to pas those flags is via the cross-compilation.conf
file.
Add LIBFOO_CFLAGS, LIBFOO_LDFLAGS and LIBFOO_CXXFLAGS variables to allow
packages to provide their own flags, possibly overriding the generic
ones entirely, as we allow for other infras. Those per-package flags will
then be used to generate the per-package cross-compilation.conf.
This means that the meson infra is the first and only infra for which
FOO_CFLAGS, FOO_LDFLAGS, and FOO_CXXFLAGS are meaningful, while for the
other infras, they are just variables private to the package itself.
Instead of naming those variables after the meson infra (e.g.
FOO_MESON_CFLAGS), we name them with a generic name, as maybe, just
maybe, we could also change the other infras to also recognise those
variables.
Just like for the HOST_MESON_SED_CFLAGS etc., we need to add auxiliary
variables to do convert the shell-formatted argument list into the
JSON-formatted list that meson expects. We can't use a pure-make
construct because the CFLAGS can contain quoting that needs to be
expanded by the shell. Similarly, we need a condition on the strip'ed
variable to avoid passing empty arguments.
To mimic this feature for packages that are built from the SDK, we also
install a templatised version of cross-compilation.conf, with three new
placeholders for custom flags. If a user wants to build a package that
needs custom flags, they can use that template to generate a per-package
cross-compilation.conf.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Adam Duskett <aduskett@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* package/pkg-generic.mk
Add <pkg>_INSTALL_INIT_OPENRC so packages can define their own steps
to install openrc service scripts.
* docs/manual/adding-packages-generic.txt
update documentation about new hook.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In particular, the manual was incorrect when the user had selected an
out-of-tree build.
Signed-off-by: Charlie Turner <cturner@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With this you can add:
$(eval $(host-golang-package))
to a package .mk file to build for host.
Signed-off-by: Mirza Krak <mirza.krak@northern.tech>
Acked-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Tested-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The hidden Config.in option BR2_PACKAGE_HOST_GO_ARCH_SUPPORTS name is
not very clear as to whether it says whether Go is available for the
target architecture or the host architecture.
Until now, this was fine since there was support for host Go
packages. But as we are about to introduce support for building host
Go packages, we need to clarify the meaning of
BR2_PACKAGE_HOST_GO_ARCH_SUPPORTS. Since it says whether the target
architecture has support for Go or not, we rename it to
BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS.
And since BR2_PACKAGE_HOST_GO_CGO_LINKING_SUPPORTS is tightly related,
we rename it to BR2_PACKAGE_HOST_GO_TARGET_CGO_LINKING_SUPPORTS.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Tested-by: Adam Duskett <aduskett@gmail.com>
[Thomas: entirely rewrite commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a 'VARS=...' setting to the example. To make it clear that several
variables can be specified, use two variables in the first example.
Only 2 variables are printed, so the ... is removed.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It is buildroot-association@buildroot.org, not @lists.buildroot.org.
Reported-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As noticed by Yann E. Morin, the address of the Paypal account is
@buildroot.org, not @lists.buildroot.org.
Reported-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For about two years, a legal entity called "Buildroot Association" was
created in France to support the Buildroot project. Until fall 2018,
this legal entity has not been used. In fall 2018, we started using it
in order to receive donations from companies in order to organize the
Buildroot Developers Meeting that took place before the Embedded Linux
Conference Europe 2018 in Edinburgh.
This commit creates a new page on our web site that documents the
existence of this Buildroot Association, and details how to become a
member. Both individuals and companies can become members.
It is worth stating that the Buildroot Association does not control
the Buildroot project: it remains a fully open-source and
community-driven project. The Buildroot Association only serves as a
legal entity to handle donations and money needed to organize the
Buildroot Developers Meeting, and pay for a few expenses related to
the project (such as domain names).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Arnout: small improvements]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
No functional change is brought by this modification.
This patch:
* removes redundant <pkg>_SRCDIR and <pkg>_BUILDDIR declarations
(already defined in pkg-generic.mk)
* documents the usage of <pkg>_SUBDIR in the python-specific section of
the manual.
Signed-off-by: Lionel Orry <lionel.orry@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
No functional change is brought by this modification.
This patch:
* removes a redundant <pkg>_SRCDIR declaration (already defined in
pkg-generic.mk)
* documents the usage of <pkg>_SUBDIR in the meson-specific section of
the manual.
Signed-off-by: Lionel Orry <lionel.orry@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In the Buildroot manual, it is specified that the Waf-based
infrastructure supports the <pkg>_SUBDIR variable, which was not true.
This patch:
* makes use of this variable by changing to the given sub-directory
before executing waf commands,
* documents the usage of <pkg>_SUBDIR in the waf-specific section of
the manual.
Signed-off-by: Lionel Orry <lionel.orry@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a step to target-finalize that checks each rootfs overlay, following
the criteria established for custom skeletons and using the same script
uesd by skeleton-custom.mk.
Add a paragraph to the documentation clarifying that rootfs overlays
don't need to contain /bin, /lib or /sbin and must not contain them when
BR2_ROOTFS_MERGED_USR is enabled.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
skeleton-custom does not install the required /bin, /lib and /sbin
directories (or symlinks), which may result in an imcomplete tree, The
user could add the required directories/symlinks to the skeleton but
they may be invalid, depending on the state of BR2_ROOTFS_MERGED_USR.
Steps to reproduce:
- Enable BR2_ROOTFS_MERGED_USR and BR2_INIT_SYSTEMD
- Set BR2_ROOTFS_SKELETON_CUSTOM_PATH to "system/skeleton"
- Run "make skeleton"
- target/{bin.lib,sbin} will not exist
Add calls to SYSTEM_USR_SYMLINKS_OR_DIRS to INSTALL_TARGET_CMDS and
INSTALL_STAGING_CMDS, so the required directories or symlinks are
created.
Add a paragraph to the documentation clarifying that custom skeletons
don't need to contain /bin, /lib or /sbin and must not contain them when
BR2_ROOTFS_MERGED_USR is enabled.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some statements are missing their semicolons.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Acked-by: <angelo@amarulasolutions.com>
Tested-by: <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
