Add documentation about how to use SELinux in Buildroot, and what are
the available mechanisms to extend and customize the SELinux policy.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
[Thomas: misc improvements.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The manual has a section on adding board support to upstream buildroot,
but it fails to mention some of the things we expect. Add more of them.
- Internal toolchain.
- Beautify defconfig file.
- Fixed versions for components.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Adam Duskett <Aduskett@gmail.com>
Reviewed-by: Adam Duskett <aduskett@gmail.com>
[yann.morin.1998@free.fr:
- use +monospace+ for the variables
- use _italic_ for sections in defconfig
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
There is no debug profile on cargo. The available profiles are: dev
(enabled by default), release, test and bench.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since Gitlab 12.9, Gitlab allow to trigger child pipeline with generated configuration file.
See: https://gitlab.com/gitlab-org/gitlab/-/issues/35632
This allow us to stop updating the .gitlab-ci.yml file when a
new defconfig is added to Buildroot.
Remove check-gitlab-ci.yml job since it is now uneeded.
Remove .gitlab-ci.yml make target.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
[ann.morin.1998@free.fr: manual: no longer needed to update at all]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As Cargo is either installed by host-rust or host-rust-bin, the
Cargo-based packages should depend on host-rustc.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
[Arnout: also select HOST_RUSTC in Config.in]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: David Pierret <david.pierret@smile.fr>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
So far in 2020, Logilin and Tap2Open made some financial donations to
the Buildroot Association, so let's thank them on our sponsors page.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Describe release engineering and development phases of the project.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the linux kernel will apply some fixups on its .config file,
based on whether some packages are enabled or not. That list of
conditional fixups is getting bigger and bigger with each new package
that needs such fixups, culminating with the pending firewalld one [0].
Furthermore, these fixups are not accessible to packages in br2-external
trees.
Add a new per-package variable, that packages may set to the commands to
run to fixup the kernel .config file, which is added at the end of the
linux' own fixups.
This opens the possibility to write things like;
define FOO_LINUX_CONFIG_FIXUPS
$(call KCONFIG_ENABLE_OPT,BLA)
endef
Of course, it also opens the way to run arbitrary commands in there, but
any alternative that would be declarative only, such as a list of
options to enable or disable (as an example):
FOO_LINUX_CONFIG_FIXUPS = +BAR -FOO +BUZ="value"
.. is not very nice either, and such lists fall flat when a value would
have a space.
For packages that we have in-tree, we can ensure they won't play foul
with their _LINUX_CONFIG_FIXUPS. For packages in br2-external trees,
there's nothing we can do; users already have the opportunity to hack
into the linux configure process by providing LINUX_PRE_CONFIGURE_HOOKS
or LINUX_POST_CONFIGURE_HOOKS anyway...
.. which brings the question of why we don't use that to implement the
per-package fixups. We don't, because _PRE or _POST_CONFIGURE_HOOKS are
run after we run 'make oldconfig' to sanitise the mangled .config.
[0] http://lists.busybox.net/pipermail/buildroot/2020-March/278683.html
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix a few punctuation mistakes. The removed link is redundant, see the
previous sentence.
Signed-off-by: Merlin Büge <merlin.buege@tuhh.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
With autoconf packages, we often specify ac_cv_func_... cached values to
avoid runtime checks during configure. With meson the equivalent is
setting properties in cross-compilation.conf which we cannot do in
Buildroot at the moment.
For example, libglib2 used to set ac_cv_func_printf_unix98 and
ac_cv_func_vsnprintf_c99 so that the system printf could be used, but
with the conversion to meson these checks fail and the gnulib fallback
is used.
Add infrastructure in the same way as FOO_MESON_EXTRA_BINARIES to allow
per-package modification to the cross-compilation properties.
Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Adam Duskett <aduskett@gmail.com>
[yann.morin.1998@free.fr: do a single substitution as in a1e3c7b693]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This provides generic functions for Qt5 qmake based packages. It will
make it possible to remove lots of redefinition of
QT5_xxx_{CONFIGURE|BUILD|INSTALL_STAGING}_CMDS. Additionally it
provides a generic target install method which will make most of the
package specific commands obsolete.
This is done by re-running the install step of the qmake generated
Makefile with the package build directory prepended (to the
staging/host path). Even though this does create lengthy pathes it
allows for easy separation of the staging files from the host destined
files by just omitting the resulting BUILD_DIR+HOST_DIR path from the
following rsync call to the real target folder. The cleanup of many
files we dont want in target is deferred to the target-finalize
step. In addition to what's being removed already, we also have to
cleanup some Qt5 specific files (prl) and the documentation directory.
This approach was chosen over copying all files recorded in the pkg-files-list
after some discussion which Thomas Petazzoni summed up:
"We don't yet use pkg-files-list really as part of the build
process anywhere, I feel a bit more comfortable at this point with what
Andreas is proposing."
Thanks to this infrastructure, it will be possible to get rid of the
many conditional install commands because qmake already takes care of
this when generating the Makefile install targets with the given or
autodetected configure options of each package.
However, custom install steps may have to remain in cases where a
particular Buildroot option has no corresponding setting in the
packages configuration options.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Unlike <PKG>_DEPENDENCIES, <PKG>_PATCH_DEPENDENCIES only guarantees
extract and patch of listed dependencies, not build. Make this subtlety
more explicit in the documentation.
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[yann.morin.1998@free.fr: slight fix]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a section to the support page for commercial support.
Add Mind, Bootlin and Smile in that section.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Package optional or choice config symbols are usually prefixed with the
package config symbol name. Rename BR2_PACKAGE_CURL to
BR2_PACKAGE_LIBCURL_CURL to conform.
Update references to the old name.
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
