Add setuptools runtime dependency, that is needed for
the chardetect script.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For some architectures, it is necessary to link with additional
libraries, such as -latomic for sparc.
Add a bit of support to make that easy; actual use will be introduced in
the following patch.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Respect the <tab><2 spaces><62 chars> rule.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use kernel 4.11 for stm32f4 discovery board
(stm32f429i-disco and stm32f469i-disco).
Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When OpenGL ES 1.1 and OpenGL ES 2.0 are used at the same time, the
build fail since GLintptr and GLsizeiptr data type are not the same in
GLES2/gl2.h and GLES/gl.h.
Also sync the data type of GLbyte, GLubyte, GLfloat, GLclampf and
GLfixed.
Fixes:
http://autobuild.buildroot.net/results/258/25898b45cefde9661d8ac87dd84bc883bb5283d1
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As can be seen in linux/arch/powerpc/include/uapi/asm/termbits.h are
defined as (note that those are octal numbers):
\#define TABDLY 00006000
\#define CSIZE 00001400
\#define CRDLY 00030000
which gives shifts of 10, 8 and 12. Adjust socat.mk accordingly to
reflect that difference.
Signed-off-by: Mark Hinds <zoronic@gmail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop upstream patches.
Cc: Jonathan Ben Avraham <yba@tkos.co.il>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream rejected[1] the patch added in commit 6a1aa4e2da (swupdate: fix
build with older glibc). Instead of carrying this patch going forward, make
librt an extra library dependency in the Buildroot local swupdate .config.
This solution is somewhat less optimal than the patch, because it always adds
librt regardless of whether SURICATTA_HAWKBIT is enabled. In theory we could
add a test for (BR2_PACKAGE_JSON_C && BR2_PACKAGE_LIBCURL), which are the
SURICATTA_HAWKBIT dependencies, and edit .config at build time. But this adds
much complexity for little gain.
[1] https://groups.google.com/forum/?hl=en#!topic/swupdate/77QWIka27es
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
... otherwise it fails spectacularly as soon as PATH is referenced in a
package rule (i.e. very soon, fortunately):
>>> host-lzip 1.18 Downloading
/bin/bash: -c: line 0: unexpected EOF while looking for matching `"'
/bin/bash: -c: line 1: syntax error: unexpected end of file
Fixes # 9886.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ciro Santilli <ciro.santilli@gmail.com>
[Thomas: fix typo in message, use tabs for indentation.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds an upstream patch to the sngrep package that fixes the
detection of wchar capable ncurses.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds basic support for orangepi-zero board.
Board support package includes the following components:
- mainline kernel v4.11
- mainline u-boot v2017.03
- extra kernel config options: spidev, spi nor flash, wifi
- dts patches to enable SPI NOR and spidev
More details about this board are available here:
- http://linux-sunxi.org/Orange_Pi_Zero
Note that at the moment networking is not supported right out of the box.
Ethernet submission to mainline kernel is a work in progress, see the
latest dwmac-sun8i branches at https://github.com/montjoie/linux
On-board SDIO WiFi chip XR819 is supported by off-the-tree wireless
driver available at https://github.com/fifteenhex/xradio
Changes from v1:
* Send patch using proper subject
* Update xr819 kernel dts patch: add compatible property
[Peter: fix s/PC/Zero/ typo]
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In 4c10eedc1 (systemd: enable required kernel features), we added
setting a few required kernel features to ensure systemd works.
However, there was a typo for one of the variables: CONFIG_TMPFS_XATTR
was written as CONFIG_TMPFS_POSIX_XATTR, which does not exist (and never
ever existed, at least not since 2.6.12)...
Reported-by: Michael Heinemann <posted@heine.so>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Michael Heinemann <posted@heine.so>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As the update from 0.0.X to 1.0.0 suggests, this is a major update. The driver
uses X11's touch API now, instead of motion with button emulation. Furthermore
it supports multitouch when a recent version of tslib is installed.
It is not backwards compatible for very old versions of the X server. See
https://github.com/merge/xf86-input-tslib/releases for some details.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Xtensa patches no longer required, the make target name changed
to Image. The Qemu binary for OpenRisc was renamed upstream.
I removed the x86->x86_64 symlink, independent files preferred.
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.11.3 2.9.0 YES OK
arm_versatile 4.11.3 2.9.0 YES OK
arm_versatile_nommu 4.4.70 2.9.0 YES OK
arm_vexpress 4.11.3 2.9.0 YES OK
m68k_mcf5208 4.11.3 2.9.0 YES OK
m68k_q800 4.11.3 q800-v2.4.0 NO (2) OK
microblazebe 4.11.3 2.9.0 YES OK
microblazeel 4.11.3 2.9.0 YES OK
mips32r2el_malta 4.11.3 2.9.0 YES OK
mips32r2_malta 4.11.3 2.9.0 YES OK
mips32r6el_malta 4.11.3 2.9.0 YES OK
mips32r6_malta 4.11.3 2.9.0 YES OK
mips64el_malta 4.11.3 2.9.0 YES OK
mips64_malta 4.11.3 2.9.0 YES OK
mips64r6el_malta 4.11.3 2.9.0 YES OK
mips64r6_malta 4.11.3 2.9.0 YES OK
nios2-10m50 4.11.3 2.9.0 NO OK
or1k 4.11.3 2.9.0 NO OK (5)
ppc_g3beige 4.11.3 2.9.0 YES OK
ppc_mpc8544ds 4.11.3 2.9.0 YES OK
ppc_virtex_ml507 4.9.6 2.9.0 NO OK (3)
ppc64_pseries 4.11.3 2.9.0 YES OK
sh4 4.9.6 2.9.0 YES OK (4)
sh4eb 4.9.6 2.9.0 NO (1) OK (4)
sparc_ss10 4.11.3 2.9.0 YES OK
sparc64_sun4u 4.11.3 2.9.0 YES OK
sparc_sun4u 4.11.3 2.9.0 YES OK
x86 4.11.3 2.9.0 YES OK
x86_64 4.11.3 2.9.0 YES OK
xtensa_lx60 4.11.3 2.9.0 YES OK
xtensa_lx60_nommu 4.11.3 2.9.0 YES OK
(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Kernel oops with 4.11.3 on boot
(4) - System is extremely slow with 4.11.3, needs further investigation
(5) - Qemu binary got renamed to qemu-system-or1k
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
After bumping libupnpp from version 0.15.1 to 0.15.2 compilation fails
for toolchains using GCC 4.7:
```
libupnpp/control/discovery.cxx: In constructor 'UPnPClient::UPnPDeviceDirectory::UPnPDeviceDirectory(time_t)':
libupnpp/control/discovery.cxx:338:5: error: 'yield' is not a member of 'std::this_thread'
```
Before version 0.15.2, libupnpp used sched_yield() which was replaced by
`std::this_thread::yield()` in the new version.
Looking at the `<thread>` header file of the PowerPC toolchain [1] from
the autobuilder shows that `yield()` is only enabled if
`_GLIBCXX_USE_SCHED_YIELD` is defined:
```
/// yield
inline void
yield() noexcept
{ __gthread_yield(); }
```
Note, that `__gthread_yield()` inlines to a call to `sched_yield()`:
```
static inline int
__gthread_yield (void)
{
return __gthrw_(sched_yield) ();
}
```
This macro is only defined if GCC was built with `--enable-libstdcxx-time`,
which is obviously not the case for the affected toolchains. For GCC 4.7 and
below this option defaults to no, which means `sched_yield()` is not enabled
though it is be available.
The issue was discussed on stackoverflow [2]. In GCC 4.9.0 the issue has
been fixed, by automatically enabling `sched_yield()` on platforms that are
known to support them.
Therefore, we update the dependency to GCC 4.9.
Fixes:
http://autobuild.buildroot.net/results/506/50670d8119b4fbd26585d3d9bd646adb1d904dbe/http://autobuild.buildroot.net/results/8b0/8b021648a073bde25dd6936ed1ea1e39977bf89b/http://autobuild.buildroot.net/results/b6d/b6d7437e1cf8cf0b3726395401ac4ebd9af2833b/http://autobuild.buildroot.net/results/0bf/0bf84f61a72a65a75c5fd0a787680f483cfead26/
.. and more.
[1] http://autobuild.buildroot.org/toolchains/tarballs/powerpc-ctng_e500v2-linux-gnuspe.tar.xz
[2] https://stackoverflow.com/a/12961816
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
since tslib now supports static builds the dependency on !BR2_STATIC_LIBS
can be removed from xf86-input-tslib too.
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
tslib can be configured to be built statically linked. So let's add this option.
tslib is quite configurable and each module can be selected to be built into
the static build. This configuration includes the hardware independent filter
modules (obviously), and the Linux evdev input module.
This results in a configuration that fully supports multitouch in any
combination.
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When building with old gcc versions (such as gcc 4.3), the current
version of kmod fails with:
shared/util.c:52: error: expected identifier or '(' before 'do'
shared/util.c:52: error: expected identifier or '(' before 'while'
This is due to a use of the internal assert_cc() macro outside of a
function, while this macro is defined for old gcc versions in a way that
cannot be used outside functions.
This wasn't noticed by the autobuilders because we don't have such old
target compilers. On the host side, we have some autobuilder instances
with such old gcc versions, but host-kmod is only used by the linux
package, which is never tested by the autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
SELinux requires a config file in /etc/selinux which controls the state
of SELinux on the system.
This config file has two options set in it:
SELINUX which set's the state of selinux on boot.
SELINUXTYPE which should equal the name of the policy. In this case, the
default name is targeted.
This patch adds:
- A choice menu on Config.in that allows the user to select a default
SELinux state.
- A basic config file that will be installed to
target/etc/selinux and will set SELINUX= to the selected state.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Acked-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- rename option to BR2_PACKAGE_REFPOLICY_POLICY_STATE
- qstrip the variable
- drop unused REFPOLICY_NAME variable.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Refpolicy by default will build the highest version supported. This may
cause older kernels to not load the policy.
This patch adds a custom policy version string which is defaulted to 30,
which is the highest supported as of today.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Acked-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- rename option to BR2_PACKAGE_REFPOLICY_POLICY_VERSION
- use qstrip to remove double quotes]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The patch is for adding selinux reference policy (refpolicy).
It is a complete SELinux policy that can be used as the system policy
for a variety of systems and used as the basis for creating other policies.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Acked-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- add entry to DEVELOPERS file
- remove redundant dependencies
- drop unused REFPOLICY_PYINC option
- use SPDX tag for license
- minor formatting fixes.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The daemon service script associated with imx-uuc failed to stop the daemon
since the PID of the process wasn't stored at start time.
Adding -m option allowed to create the uuc.pid file as expected.
Signed-off-by: Alexandre Esse <alexandre.esse.dev@gmail.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
cmake depends on rhash, but host-cmake doesn't. This is because we use
the bundled dependencies for host-cmake but not for target.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There are new dependencies: erlang-p1-jiffy, erlang-p1-oauth2,
erlang-p1-stun, erlang-p1-tls, erlang-p1-utils, erlang-p1-xmpp
as well as two host dependencies on erlang-p1-utils and
erlang-p1-xmpp. Otherwise the compilation via rebar fails.
4 patches have been refreshed and a new patch have been introduced to
tell rebar to use host dependencies instead of trying to download them.
Hopefully this patch could be drop in ejabberd 17.06. Missing SoB in
patches have been added as well.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
OAuth2 library for Erlang
https://github.com/processone/p1_oauth2
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes
sdksyms.c:311:15: error: expected expression before »,« token
(void *) &, /* ../../include/os.h:96 */
by backporting an upstream patch, sdksyms.c is generated by
hw/xfree86/sdksyms.sh which is broken when used with gcc5+.
Problem was found while testing
http://patchwork.ozlabs.org/patch/762102/
using this defconfig
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_XSERVER_XORG_SERVER_V_1_14=y
BR2_PACKAGE_XDRIVER_XF86_INPUT_TSLIB=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
