Changelog:
- Check raw mode flag for backward compatbility
- Fix membership name in bch geometry structure.
- Fix the previous implementation that may ruin the BBM
- Adapt raw page accesses to match the new raw_read/write implementation
The old raw access implementation (in GPMI driver) was considering that
data and OOB data were separated in their respective regions (the data
area and the OOB area of the page), which is not true.
They are actually interleaved this way:
METADATA + ((DATA + ECCBYTES) * N)
The new raw access implementation (in the GPMI driver) is hiding this
weird
layout to MTD users by exposing a more common layout:
DATA + METADATA + (N * ECCBYTES)
Here METADATA + (N * ECCBYTES) are exposed as if they were stored in the
OOB area.
Unfortunately kobs-ng rely on this weird layout when accessing the NAND
in raw mode.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/a7545b1
Signed-off-by: Andrew Webster <awebster@arcx.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
- Remove platform check in hdmi-cec and imx-lib - simplify to support builds
on multiple machines
- For ipu use the dummy defaul object to fix build issues on non-ipu hardware
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/7946533
Implicitly tested through gstreamer as the
plugins rely on them for vpu decoding, e.g.:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Andrew Webster <awebster@arcx.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
--Update 'nLastFrameEndPosPhy' in seqinit stage to avoid feed
the same SPS to vpu repeatedly.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/d6b9490
Implicitly tested through gstreamer as the 0.10 plugin relies on it:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
Signed-off-by: Andrew Webster <awebster@arcx.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
--Add aac latm parser in parser_libs, support aac latm in mpeg2 parser
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/e2c6f10
Implicitly tested through gstreamer as the 0.10 plugin relies on it:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
Signed-off-by: Andrew Webster <awebster@arcx.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
--[aac_dec] refine the code for pure c build
aac decoder c build need float point support, which use some
float point function.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/4b91194
Implicitly tested through gstreamer as the 0.10 plugin relies on it:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
Signed-off-by: Andrew Webster <awebster@arcx.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
VPU firmware has been changed to the format of Linux codec driver firmware.
Change VPU library to adapt to firmware format change.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/f5e1056
Implicitly tested through gstreamer as the plugins rely on it:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Andrew Webster <awebster@arcx.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
- Upgrade to FW v3.1.1_r46072
- v3.1.1_r46070 plus 2 patches 391/392
- FSLARIK-391 [Decoder/H.264] VPU is always busy when decoding an
erroneous H264 bitstream
- FSLARIK-392 [Decoder/VC1] VPU outputs only 1 picture
- Change to the format of Linux coda driver firmware
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/dbb8773
Implicitly tested through gstreamer as the plugin relies on it:
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Andrew Webster <awebster@arcx.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/c9c30c5
This package has been tested with the following commands with the
matching imx-gpu-viv library:
# modprobe galcore
# cd /usr/share/examples/viv_samples/vdk/
# ./tutorial7
Signed-off-by: Andrew Webster <awebster@arcx.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package provides the Universal Adapter user-space utility that is
used to receive commands from the Manufacturing Tool using the Freescale
UTP Protocol.
It requires a Freescale/NXP kernels whose configuration contains the
CONFIG_FSL_UTP option.
The /fat file is provided as a bootargs to the g_mass_storage driver
from U-Boot, see:
http://git.freescale.com/git/cgit.cgi/imx/uboot-imx.git/tree/include/
configs/mx6sabre_common.h?h=imx_v2015.04_3.14.52_1.1.0_ga#n116
Init scripts are provided so that the tool starts automatically at
bootup.
Tested on Nitrogen6_MAX + MFGTools.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
[Thomas:
- test return value from start-stop⁻daemon in init script, and
reindent the init script
- fix dependency of the comment
- rewrap Config.in help text.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
- Add basic epdc firmware copy to correct output path
- Move legacy epdc firmware to this package out of kernel
- VPU firmware upgrade to v3.1.1_r46070
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/0fdf829
This package has been implicitely tested through gstreamer as the
plugins rely on them for vpu decoding for instance:
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changelog:
- Support AVcVuiInfo for Decoder through DecInitialInfo or DecOutputInfo
- Clear structure iram IOGetIramBase() fails to set them to avoid
using uninitialized variables.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/be030922
This package has been implicitely tested through gstreamer as the
plugins rely on it for vpu decoding:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changelog:
- add new feature to read bch geometry setting from debugfs, it provides
the feasibility to support large oob NAND devices.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/9953874c
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order to match the imx-gpu-viv graphics libraries version.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/dcfa6752
This package has been tested with the following commands:
# modprobe galcore
# cd /usr/share/examples/viv_samples/vdk/
# ./tutorial7
Signen-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This version is released with 3.14.52-1.1.0_ga release.
Includes many of the bug fixes and stability improvements.
For more information refer to i.MX Linux Release Notes from NXP website:
L3.14.52_1.1.0_LINUX_DOCS package is under Supporting Information.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/f1161869
This package has been tested with both X11 and Framebuffer backends:
# cd /usr/share/examples/viv_samples/vdk/
# apitrace trace --api egl ./tutorial7
# gmem_info
... display memory use per PID ...
# apitrace replay tutorial7.trace
# eglretrace tutorial7.trace
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Packages like QT5 Base with OpenGL and X support link against libGAL.so
at build time. This results in an error because some X functions used
in libGAL.so aren't referenced as the libXdamage, libXext and libXfixes
packages aren't built and installed into sysroot at the time. Fix this
by adding these three packages as build dependencies of imx-gpu-viv.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is the Vivante kernel driver split from the kernel source code in
order to make it possible to be used in any kernel source since 3.10.53.
The driver source code provided by Freescale needs fixes so the
community forked the code to allow faster development and easier
integration of fixes from the community.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/32cf391https://github.com/Freescale/meta-fsl-arm/commit/4249193
This package has been tested with the following commands:
# modprobe galcore
# cd /usr/share/examples/viv_samples/vdk/
# ./tutorial7
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upgrade to 5.0.11 P7.1 for i.MX6 with GPU
i.MX6QP qualified graphics driver(5.0.11P7.1).
Includes many of the bug fixes and stability improvements.
For more information refer to release notes from
http://www.freescale.com/imx6qp
libGAL_egl is no longer provided in p7.1.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/b3ef125
This package has been tested with both X11 and Framebuffer backends:
# cd /usr/share/examples/viv_samples/vdk/
# apitrace trace --api egl ./tutorial7
# gmem_info
... display memory use per PID ...
# apitrace replay tutorial7.trace
# eglretrace tutorial7.trace
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As all the packages now have a version which doesn't depend on the BSP
version.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Change version to be independent of BSP version. This limits
confusion on future BSP updates that do not include imx-lib updates.
Changelog since 3.14.28-1.0.0_ga:
- Add i.MX 7D support.
- Change LICENSE file.
- Enable pxp libraries for i.MX 6UltraLite.
- Fix rng and shara2 to exclude the 6UL platform to avoid build breaks
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/b299454https://github.com/Freescale/meta-fsl-arm/commit/5f28af0
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use a different versioning schema based on package versioning
instead of BSP version. This way, if a new BSP version does
not bump this package, we can keep this package unchanged as well.
Changelog since 3.14.28-1.0.0_ga:
- Add fixes for maximum ecc strength for each platform.
- Add mx7 boot config support.
- Add i.MX 6UltraLite support.
- Join the ecc with real FCB data when not byte-aligned.
- Generalize the encode_bch_ecc function for different configurations.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/8d47a2ehttps://github.com/Freescale/meta-fsl-arm/commit/70edf16
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use a different versioning schema based on package versioning
instead of BSP version. This way, if a new BSP version does
not bump this package, we can keep this package unchanged as well.
VPU firmware upgraded to v3.1.1_r46067
- Low Latency fixes for H.264 encoder
- Wrong frame number fix for H.264 decoder
- Decode failure fix for H.264 decoder with multi-SPS/PPS headers
The package adds the EPDC waveforms and the needed changes to properly
install those were done in the firmware-imx.mk file.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/d869826https://github.com/Freescale/meta-fsl-arm/commit/075a5b1
This package has been implicitely tested through gstreamer as the
plugins rely on them for vpu decoding for instance:
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
[Thomas:
- fix typo in commit logs
- remove ; \ and ; at the end of commands, since they were not
needed.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The new version of imx-lib no longer bears the EULA file, and has no
other license file.
So, we pick a small header as the license file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gary Bisson <gary.bisson@boundarydevices.com>
Acked-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Starting with Linux 4.4 headers, mtd-user.h isn't including stdint.h any
more which breaks the build.
Fixes:
http://autobuild.buildroot.net/results/05a/05a159c7f8382237d4c941b1bb6de7dad72708f3/
[Thomas:
- fix minor typo in the patch description
- add reference to the autobuilder failure, as suggested by Baruch.]
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
GPU package now includes libraries for GPU2D as well as several tools to
monitor and debug the GPUs.
GPU2D libraries have been tested with the example provided in the
package:
# /usr/share/examples/fsl-samples/g2d/overlay_test/g2d_overlay_test
Overlay rendering time 53861us .
The tools have been tested with the following commands:
# cd /usr/share/examples/viv_samples/vdk/
# apitrace trace --api egl ./tutorial7 &
# gmem_info
... display memory use per PID ...
# killall tutorial7
# apitrace replay tutorial7.trace
# eglretrace tutorial7.trace
[Thomas: tweak the installation logic to be more explicit about paths
being copied, and to use cp -dpfr consistently.]
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The imx-vpu package builds just fine without any special kernel header.
Cc: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Based on the Yocto 3.14.28-1.0.0_ga update:
https://github.com/Freescale/meta-fsl-arm/commit/6c44744
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also add the package hash file.
3.14.28-1.0.1 patch release has the following bug fixes:
MGS-554 [#1644] Fix the false alert with GPU commit dirty
MGS-528 [#ccc] Wayland does not free window memory until the application
exits
GRPH-56 [#ccc] Add environment variable to turn off memory fill
GRPH-55 [ccc] Add alpha channel for direct texture viv extension
MA-6540 [#1672] Fix native fence FD leak found by Android™ CTS
MGS-663 [#1686] P4 release can't be built statically
MA-6527 [#1666] Fix android.webgl.cts.WebGLTest CTS failure
MGS-511-2 [#1593] Qt 3D app cannot run on i.MX 6SoloX board
MGS-658 [#ccc] Fix build warning of isInApiTraceMode for static link
Revert MGS-352 [#1453] Creating context on 5.x is slower than 4.x due to
process name
read
MGS-578 [#1657] GoogleEarth APK encounters a shader compile error
MGS-507 [#1323] RenderToTexture has distorted pictures on screen in DL
board
MGS-547 [#ccc] Add YVYU format test in g2d_overlay_test
MGS-547 [#1640] YVYU format gets wrong result when 2D is built
MGS-564 [#ccc] Resolve race condition in display frame sync
MGS-367 [#1589] "CTRL+C" to close the "tutorial7_es20" causes GPU to
hang
MGS-543 [#1604] Remove some unsupported extensions in gles10
MGS-436 [#ccc] Memory leak in glimagesink video loop playback
MA-6267 [#1600] Fix ES3.0 benchmark UBenchEnhanced can't run
MA-6208-1 [#1543] Fix build error
MA-6208 [#1543] Fix com.drawelements.deqp.gles3 CTS failure
MGS-511 [#1593] Qt 3D app cannot run on i.MX 6SoloX board
MGS-512 [#1493] Fix es30 conformance failures related to glReadPixels
MGS-502 [#ccc] libCLC failure
MGS-500 [#ccc] Disable apitrace for static build
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-freescale/commit/8f74380a
This package has been tested with both X11 and Framebuffer backends:
# cd /usr/share/examples/viv_samples/vdk/
# ./tutorial7
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add hash files for the updated packages.
Also update the license of firmware-imx.
This patch is based on the Yocto equivalent:
5521d77c9f191b5808cb3bad4af9484ac
Those packages have been implicitely tested through gstreamer as the
plugins rely on them for vpu decoding for instance:
# gst-launch-0.10 playbin
# uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Current firmware-imx version no longer contains ath6k and ar3k firmware.
Cc: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Part of fimrware-imx were dropped in the new version, so we have less
legal-info to save.
Fixes:
http://autobuild.buildroot.org/results/59b/59b09152700a5839af46edb554e53981569f8921
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to be in line with new Freescale naming convention:
https://github.com/Freescale/meta-fsl-arm/commit/74c86aa9
"Graphics recipe is renamed from gpu-viv-bin-mx6q to imx-gpu-viv"
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump the Vivante drivers to 5.0.11.p4.1. The version scheme has changed
and 5.0.11.p4.1 is indeed the latest version.
In addition to the version bump, other changes are done to handle the
new directory organisation.
The work behind this commit was funded by ECA Group
<http://www.ecagroup.com>. ECA Group is the copyright owner of the
contributed code.
Changelog:
- Package version is changed to use Vivante version
- imx-gpu-viv includes separate sub packages for demos and tools
to support flexible package additions
- Graphics package is reorganized to improve library layout
- New GPU tool apitrace is added - supported only for X11 backend (not
supported yet)
- gpu-viv-g2d shares same package with imx-gpu-viv (not supported yet)
This patch is based on the Yocto equivalent:
74c86aa963
[Gary:
1- used the pkgconfig files provided in the package from now on
2- extend the commit log
3 - add a symlink for libGAL_egl.so as it wasn't working on X
- had to do a fixup as for some reason the lib is called libGAL_egl.dri.so
Without that last symlink change, the tutorial examples were
missing some symbols and qtbase wouldn't build.
This package has been tested with both X11 and Framebuffer backends;
# cd /usr/share/examples/viv_samples/vdk/
# ./tutorial7 ]
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version now only applies to imx-lib and firmware-imx. All other
Freescale packages have their own version from now on.
This patch is based on the Yocto equivalent:
80ad0f2e54b12d193092
Those packages have been implicitely tested through gstreamer as the plugins
rely on them for vpu decoding for instance:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- imx-vpu version changed to internal version
- VPU share memory file open fixes
- Upgrade ion usage
- Remove obey-variables patch -now included in release
This patch is based on the Yocto equivalent:
db343da3e4
The IOGetVirtMem return value patch has now been included into the upstream
package.
This package has been implicitely tested through gstreamer as the plugins
rely on it for vpu decoding:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move output selection to Config.in. It easier to add new backends selection
(wayland, directfb, ...).
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since gpu-viv-bin-mx6q is provided as binary package, there is no build
time dependencies.
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This approach is less error-prone during development.
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To compile with Vivante header and use framebuffer, it is necessary to
pass option -DEGL_API_FB. This option is declared in pkg-config file of
Vivante library. But many packages (especialy qt5 components) does not
consider these flags.
So instead of patching every packages that use EGL, it is more
convenient to patch Vivante headers.
This commit add #define EGL_API_FB on top of eglvivante.h when
necessary.
[Thomas: fix syntax error.]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
