The Zynq ZedBoard defconfig does not build anymore since commit
6cda724efb ("package/gcc: switch to gcc
6.x as the default"). Fix by upgrading to the latest U-Boot version,
xilinx-v2017.1, based on mainline v2017.01.
Fixes:
In file included from include/linux/compiler.h:54:0,
from include/linux/bitops.h:5,
from ./include/common.h:20:
include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc6.h: No such file or directory
#include gcc_header(__GNUC__)
^
compilation terminated.
[Build- and run-tested]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When calling 'make printvars' without -s, it ends with
"Nothing to be done for 'printvars'." That's because the rule only
contains $(info ...) calls and no actual shell commands to execute.
To avoid this, make sure there is a shell command by adding :.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Quite a few targets in the top-level Makefile were missing the .PHONY
marking. Now that the .PHONY declarations are next to the definition
of the targets, they are much easier to find.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, a lot of targets are declared PHONY together in the middle
of the Makefile. This has two important shortcomings:
- it is more difficult to see if a target is missing from PHONY;
- it is currently inside the ifeq ($(BR2_HAVE_DOT_CONFIG),y) condition,
but some of these targets are also defined when there is no .config;
in that case, these targets are not declared as PHONY.
Both issues can easily be solved by putting the PHONY declaration next
to the definition of the target.
The noconfig_targets are also all declared PHONY together; however,
for these we anyway have to keep the noconfig_targets variable
up-to-date, and that PHONY declaration is outside all conditions, so
there is no benefit of splitting them.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This simplifies the variable a little
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
toolchain is a package, so it is already defined as .PHONY in the
inner-generic-package macro.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reusing the qemu x86-64 linux config isn't very obvious, so these defconfigs
aren't taken into consideration when the qemu defconfigs are updated,
breaking the build.
Instead use a custom linux config for the pc defconfigs. With this, we also
can get rid of the fragment file containing the delta fra the qemu config.
Created by linux-update-defconfig (after turning of the fragment file).
Also drop the linux kernel version number from the file name as it just
causes extra noise whenever the kernel is bumped.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The pc_x86_64 defconfigs reuse the linux configuration from qemu_x86_64, but
they weren't adjusted when this was updated to use linux-4.11 in 28d97609b2
(configs/qemu: bump to the latest kernel version), breaking the build.
Fix it by also moving them to linux-4.11.x.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
HTTPS works better behind certain corporate firewalls.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-7507: decoding a status request TLS extension that has a
non-empty responder IDs list could lead to a crash due to a null pointer
dereference.
https://lists.gnupg.org/pipermail/gnutls-devel/2017-June/008446.html
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add new runtime dependencies bcrypt and pynacl.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 'wrapper' tool built by syslinux is executed on the build machine,
so it should be built with CC_FOR_BUILD.
Signed-off-by: Benoît Allard <benoit.allard@greenbone.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package selects erlang-p1-stringprep, which depends on
BR2_INSTALL_LIBSTDCPP. Thus, it should also depend on this item.
Fixes:
http://autobuild.buildroot.net/results/fe76971fead52acdd64612161e92a48a4ad36572/
Signed-off-by: Johan Oudinet <johan.oudinet@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for Engicam i.CoreM6 Quad/Dual board
with below features:
- U-Boot 2017.05
- Linux 4.11
- Default packages from buildroot
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Mostly bugfixing and cleanups. Both patches integrated.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a runtime dependency of docker-engine in version 17.05.0-ce
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a small patch to gdb that fixes the build of gdbserver
on m68k/coldfire:
../nat/linux-ptrace.c: In function 'linux_fork_to_function':
../nat/linux-ptrace.c:282:19: warning: implicit declaration of function 'clone' [-Wimplicit-function-declaration]
child_pid = clone (function, child_stack + STACK_SIZE,
^
../nat/linux-ptrace.c:283:5: error: 'CLONE_VM' undeclared (first use in this function)
CLONE_VM | SIGCHLD, child_stack + STACK_SIZE * 2);
^
../nat/linux-ptrace.c:283:5: note: each undeclared identifier is reported only once for each function it appears in
Thanks to Waldemar for pointing out the patch fixing this issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
- None
Changes since v1:
- New patch in the series
gdbserver's code looks at both UCLIBC_USE_MMU *and* UCLIBC_HAS_MMU to
decide whether to enable the no-MMU code. So far, on noMMU platforms,
UCLIBC_HAS_MMU was still set to 'y'. This commit adjusts this, which is
a step forward in getting gdbserver to build on m68k/coldfire.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
- None
Changes since v1:
- New patch in the series
Building a toolchain for SuperH/musl works, but the toolchain generate
bogus binaries, because the path to the program interpreter is not
known (and therefore is /dev/null).
This commit backports a patch from gcc 6.x to make SuperH support with
musl work properly.
The patch is not needed in gcc >= 6.x because the musl support is
upstream. The patch is not needed for gcc 4.9 because we had a
different musl support patch that had support for all architectures in
one patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
- None
Changes since v1:
- New patch in the series
This commit small patches to gdb that fix redefined structures build
problems that occur when building on PowerPC, PowerPC64, PowerPC64le and
SuperH with the musl C library.
The PowerPC(64)(le) patch was taken from the Yocto Project, the SuperH
patch was inspired from the PowerPC patch. The issue has also been
reported upstream to the musl developers:
http://www.openwall.com/lists/musl/2017/06/03/1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
- None
Changes since v1:
- None
Neither gdb nor gdbserver have support for ARM noMMU and OpenRISC, so
let's disable gdb on those architectures.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
- Fixed BR2_openrisc to BR2_or1k in Config.in.host
Changes since v1:
- Fixed BR2_openrisc to BR2_or1k
Before adding more architecture dependencies to gdb, let's introduce a
BR2_PACKAGE_GDB_ARCH_SUPPORTS, to avoid duplicating this list of
dependencies between the Config.in comment and the main Config.in
option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
- None
Changes since v1:
- None
Like for freetype-config, override libpng-config path otherwise
the one from the host system may be used when installed.
Make sure that the one from STAGING_DIR is used.
configure:7480: checking for libpng-config
configure:7498: found /usr/bin/libpng-config
configure:7510: result: /usr/bin/libpng-config
configure:7529: checking whether libpng is present and sane
[...]
nios2-linux-gnu-gcc: ERROR: unsafe header/library path used in cross-compilation: '-I/usr/include/libpng12'
Fixes
http://autobuild.buildroot.net/results/b68/b68f54404a7d412d639ebb6d052412eea6ee3bf1/lcdproc-0.5.7/config.log
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
freetype-config from the host system may be used when installed.
Make sure that the one from STAGING_DIR is used.
checking if freetype support has been enabled... yes
checking for freetype-config... /usr/bin/freetype-config
checking for FreeType -- version >= 7.0.1... cross compiling; assuming OK... yes
Fixes:
http://autobuild.buildroot.net/results/c7c/c7c52cd56b985fd73434d5997e9a6ab3f7d7e71e
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add the Linux PTP Project package.
http://linuxptp.sourceforge.net/
The SysV and systemd init scripts start the daemon in slave-only mode on eth0
and synchronize the system clock to PTP.
Signed-off-by: Petr Kulhavy <brain@jikos.cz>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The dependency on !BR2_STATIC_LIBS was here because of tslib not
supporting static builds. But since
commit 05fadfea1 ("package/tslib: enable statically linked building")
it does and we can remove this dependecy.
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The dependency on !BR2_STATIC_LIBS was here because of tslib not
supporting static builds. But since
commit 05fadfea1 ("package/tslib: enable statically linked building")
it does and we can remove this dependecy.
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The dependency on !BR2_STATIC_LIBS was here because of tslib not
supporting static builds. But since
commit 05fadfea1 ("package/tslib: enable statically linked building")
it does and we can remove this dependecy.
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When Perl 5.26 is installed on the host, building some packages like
avahi fail, because of intltool-update:
```
Unescaped left brace in regex is illegal here in regex; marked by <-- HERE in m/^(.*)\${ <-- HERE ?([A-Z_]+)}?(.*)$/ at $BUILDROOT/host/usr/bin/intltool-update line 1065.
```
Apparently, this has been a warning before Perl 5.26, but now it is an
error.
Fetch from:
https://github.com/Alexpux/MSYS2-packages/blob/master/intltool/perl-5.22-compatibility.patch
Reported upstream:
https://bugs.launchpad.net/intltool/+bug/1696658
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If util-linux is not installed system-wide on the host, the build
fails with:
/usr/bin/gcc -Wp,-MT,isohybrid.o,-MMD,./.isohybrid.o.d -O2 -I/home/thomas/projets/buildroot/output/host/usr/include -W -Wall -Wstrict-prototypes -Os -fomit-frame-pointer -D_FILE_OFFSET_BITS=64 -I/home/thomas/projets/buildroot/output/build/syslinux-6.03/utils -c -o isohybrid.o /home/thomas/projets/buildroot/output/build/syslinux-6.03/utils/isohybrid.c
/home/thomas/projets/buildroot/output/build/syslinux-6.03/utils/isohybrid.c:40:23: fatal error: uuid/uuid.h: No such file or directory
#include <uuid/uuid.h>
^
compilation terminated.
Therefore, this commit adds a dependency on host-util-linux, which
will ensure that libuuid is available. The resulting isohybrid tool is
really installed, and linked with libuuid:
$ readelf -d output/host/usr/bin/isohybrid
Dynamic section at offset 0x3e00 contains 26 entries:
Tag Type Name/Value
0x0000000000000001 (NEEDED) Shared library: [libuuid.so.1]
0x0000000000000001 (NEEDED) Shared library: [libc.so.6]
0x000000000000000f (RPATH) Library rpath: [/home/thomas/projets/buildroot/output/host/usr/lib]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add 'ipython_genutils'[1] package to Buildroot. Needed by 'traitlets'.
[1] https://pypi.python.org/pypi/ipython_genutils
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: take into account comments made by Yegor:
- fix alphabetic ordering in the DEVELOPERS file
- fix comment in hash file
- add license file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Specifying setup type to be 'distutils' results in this package being
installed as .egg, a zipped file, which inadvertantly makes
'simplegeneric' to be dependent on BR2_PACKAGE_PYTHON*_ZLIB. In order
to avoid that specify setup type to be 'setuptools' which makes use of
--single-version-externally-managed and therefore installs the package
as .pyc and a .egg-info folder.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
