The make all command run the tools/makefile on the process.
This makefile use "pkg-config" command to support static link.
The issue is the use of pkg-config configured for crosscompiling
to build binaries tools for host architecture.
To fix it, I add pkg-config environment variable to configure it for host.
Add a test to avoid future regress on the build of U-boot.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[yann.morin.1998@free.fr:
- fix mixed space-TAB indentation
- fix check-package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 3cf2782906 (support/testing/infra/emulator.py: update pre-built
kernels) bumped the default kernels used by the testing infra.
However, the newer armv7 kernel (at least) no longer has support for
lz4-compressed squashfs filesystems.
This breaks the squashfs test:
Filesystem uses "lz4" compression. This is not supported
List of all partitions:
1f00 131072 mtdblock0
(driver?)
1f01 32768 mtdblock1
(driver?)
b300 2048 mmcblk0
driver: mmcblk
No filesystem could mount root, tried:
squashfs
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,0)
Updating the kernel again is a little bit cumbersome, while fixing the
actual test is relatively trivial, so this is what we do: we switch
over to lzo, which is supported by the new kernel:
# zcat /proc/config.gz |grep SQUA
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
# CONFIG_SQUASHFS_XZ is not set
While at it, also drop the superfluous line disabling gzip compression:
it is part of a choice, so enabling one (lzo here) forcibly disables the
others (of which gzip).
Fixes: 3cf2782906
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Will avoid the following warning:
WARNING: Image format was not specified for
'/home/thomas/projets/outputs/TestExt3/images/rootfs.ext3' and
probing guessed raw. Automatically detecting the format is
dangerous for raw images, write operations on block 0 will be
restricted. Specify the 'raw' format explicitly to remove the
restrictions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
All the tests that are using if=sd as a Qemu options are changed to
use infra.img_round_power2() instead of simply extending the size of
the image to the next MB boundary, which is not longer sufficient with
Qemu >= 5.1.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: drop now-useless imports]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since Qemu 5.1, the SD card size must be a power of two, so the
default size for ext2/3/4 filesystem images of 60 MB is not
suitable. Since 16 MB is used for the Ext4 test, let's use the same
value for the other tests as well (ext2, ext2r1, ext3). Without this
change, the ext2, ext2r1 and ext3 simply fail to run under Qemu >=
5.1.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The BRTest() class implements an assertRunOk() method that does the
very common work of running a command inside the emulator, and
checking that it is successful.
This commit changes all locations where this .assertRunOk() method can
be used, instead of open-coding the same logic.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump U-Boot version in TestATFAllwinner. Updating U-Boot version to
2021.04 requires the following two changes.
First, after switching to binman, u-boot.itb is no more generated for
64-bit sunxi boards. Combined u-boot-sunxi-with-spl.bin image should
be used instead. This image contains SPL, U-Boot, and FIT image,
where FIT image contains other binaries such as BL31 and SCP.
Second, new U-Boot enables support for System Control Processor (SCP)
firmware. SCP firmware is included by default into FIT image in the
combined u-boot-sunxi-with-spl.bin binary. When SCP is not available
or not needed, it should be explicitly disabled by pointing to an
empty file. Support for Allwinner SCP firmware is not yet available
neither in Buildroot nor in mainline kernel. So disable it for now
using custom U-Boot build options.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Switch to mainline TF-A that provides basic support for H5 and A64.
Note that Allwinner platform layer in TF-A does not provide support
for GCC stack protection, so make sure to disable this TF-A feature.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As this version brings support for kernel up to 5.12, we update the
test cases to use the 5.12 kernel.
Signed-off-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: check the two files are identical]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch implements a simple test in which a dummy file system image
is created, then `bmaptool create` and `bmaptool copy` are used to copy
it to another file.
Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
[Thomas: several reworks, add myself to DEVELOPERS]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: check the two files are identical]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This module is only partially compatible with lzlib (which is no longer
maintained).
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[yann.morin.1998@free.fr: amend commit log about limited compatibility]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since [1], PIC/PIE is enabled by default but the TestRelroPartial
test expect implicitely PIC/PIE being disabled.
Disable PIC/PIE from the config fragment provided by
TestRelroPartial.
[1] 810ba387be
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1255661757
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
From [1]
"Xorg does not implement real dynamic linking and requires that its
modules get loaded in the right order."
From /var/log/Xorg.0.0.log:
(II) LoadModule: "modesetting"
(II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
(EE) Failed to load /usr/lib/xorg/modules/drivers/modesetting_drv.so: /usr/lib/xorg/modules/drivers/modesetting_drv.so: undefined symbol: shadowRemove
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1255661899
[1] https://forums.gentoo.org/viewtopic-p-8245578.html#8245578
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since the mesa3d bump to version 21.0.3 [1], the
BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST option is not supported anymore
since the mesa DRI swrast driver has been removed upstream
So, switch to Gallium swrast.
[1]15a2f9b819806d38a7d8172a20f80130b1d60e63
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Boot a QEMU sbsa-ref machine with ATF, EDK2, GRUB2 and a minimal
kernel. This is a simple but effective test of a compliant setup.
Signed-off-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Extend docker_compose_test() to expose /bin on the host to the container
through a volume mount and verify that /bin/busybox can be downloaded and
contains the right data.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Extend docker_test() to expose a random (8888) port to verify that doesn't
fail, and extend the docker-compose test to run the busybox httpd in the
background, expose that as port 80 and verify that /etc/resolv.conf could be
fetched by wget.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The python2 support has been removed since the python-colorzero bump version to 2.0.
[1] 73bf3292e1
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The python2 support has been removed since the python-colorzero bump version to 2.0.
Remove the gpiozero test with python2
[1] 73bf3292e1
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Create a new user 'sudotest' to validate that sudo really works (i.e.
properly has setuid).
Creating the user and adding it to sudoers is done at runtime, otherwise
we'd need to add extra files to the config which complicates things a
little bit.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Kernel 4.16.7 is old enough to produce the "multiple definition of `yylloc'"
error which is fixed in newer versions.
Bump the test kernel version from 4.16.7 to 5.10.34 to prevent this error wwhen
building the test image.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Test that the TAICLOCK and TCP servers are working.
Signed-off-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: indent config lines more]
Test that s6-rc service database compilation is working.
Signed-off-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: indent config lines more]
Test that a few basis utilities are working.
Signed-off-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: indent config lines more]
Test that directory scanning and supervision is working.
Signed-off-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: properly indent, and use textwrap to dedent again.]
Test that the interpreter can run a basic command.
Signed-off-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: indent config lines more]
OpenZFS is an advanced file system and volume manager which was originally
developed for Solaris and is now maintained by the OpenZFS community. This
repository contains the code for running OpenZFS on Linux and FreeBSD.
http://zfsonlinux.org/
Signed-off-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
[me:
- fix test case on how to use a pre-built toolchain
- reorder the test case config
- add test case with glibc
- drop superflous test timeout override
- only select libtirpc when C library lacks native RPC
- drop unused ZFS_MODULES variable
- drop ZFS_CPE_ID_PREFIX and ZFS_AUTORECONF_OPTS which are defaults
- drop NLS options, already set in a generic manner
- drop incomplete/improper sysvinit support
- some cosmetics
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
FOO_CPE_ID_VALID really ought to be an internal implementaion detail.
Packages that really want to trigger their CPE defintitions really
should set one of the actual variables to a meaningful value.
There are two CPE-related variables that we could chose to set to
replace FOO_CPE_ID_VALID: FOO_CPE_ID_VENDOR and FOO_CPE_ID_PRODUCT.
Between those two, _VENDOR more often diverges from the default than
_PRODUCT does, so that's what we use.
---8<------8<------8<------8<------8<---
#!/bin/bash
# Replace FOO_CPE_ID_VALID = YES with FOO_CPE_ID_VENDOR = foo_project
for i in $(git grep -l -E '[^)]_CPE_ID_VALID = YES' package support); do
pkg="$(basename "${i%/*}")"
sed -r -i -e "s/_CPE_ID_VALID = YES/_CPE_ID_VENDOR = ${pkg}_project/" "${i}"
done
---8<------8<------8<------8<------8<---
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Peter: update cpe-test comment to reflect pkg3 change]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix U-Boot config snippet in TestATFAllwinner. Bump U-Boot
version to fix DTC build on hosts with gcc 10 and add
pylibfdt dependency.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There were only two users of Marvell ATF: SolidRun MacchiatoBin board
and ClearFrog GT 8k board. After mv-ddr-marvell package update both
boards switched to upstream ATF. Remove tests for now unused
Marvell ATF.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Switch to using the tarball helper, that can generate reproducible
archives whatever the tar version >= 1.27.
However, those archives are not identical to the previous ones generated
in the (now-broken) gnu format.
To avoid any clashing between old and new archives, and new and old
Buildroot versions, we need to name the new generated archives
differently from the existing ones.
So, we bump the git-specific format-version to -br1.
The %ci date has been supported by git back to 1.6.0, released August
2008); it is not strictly ISO8601, but is still accepted as a PAX date
header. The strict ISO8601 placeholder, %cI, was only introduced with
2.2.0, release in November 2014, so too recent to be widely available.
As the format and the names of the archives changes, we need to update
all the hash files with the new names and hashes.
Of all the bootloaders that have a git download method, vexpress-firmware
is the only one to have a hash. Others have no hash files, or they have
explicitly set BR_NO_CHECK_HASH_FOR.
For the packages, linux-headers is the special snowflake, as the git
download is only for custom git tree, so it is excluded from the hash
verification with BR_NO_CHECK_HASH_FOR.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Vincent Fazio <vfazio@xes-inc.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Vincent Fazio <vfazio@xes-inc.com>
---8<------8<------8<------8<---
#!/bin/sh
# Find and download all packages using git as backend.
# Manually fix hashes for affected packages.
# Packages that only have a host variant
HOST_ONLY='imx-mkimage|mxsldr|netsurf-buildsystem|opkg-utils|prelink-cross|qoriq-rcw|vboot-utils'
# Packages that have a non-git main _SOURCE, and/or which
# have BR_NO_CHECK_HASH_FOR for the git _SOURCE
NOT_GIT='aufs|aufs-util|xenomai|linux-headers'
export BR2_DL_DIR=$(pwd)/temp-dl-dir
make defconfig
make $( git grep -l -E 'SITE_METHOD[[:space:]]*:?=[[:space:]]*git\>|_SITE[[:space:]]*:?=[[:space:]]*git:' \
boot/vexpress-firmware/ package/ \
|sed -r -e 's,.*/([^/]+)\.mk,\1,' \
|sed -r -e '/^('"${NOT_GIT}"')$/d;' \
-e 's/^('"${HOST_ONLY}"')/host-\1/;' \
-e 's/$/-legal-info/;'
)
---8<------8<------8<------8<---
This commit adds a number of test cases to verify that the CPE_ID_*
variables are properly handled by the generic package infrastructure
and that the "make show-info" JSON output matches what we expect.
A total of 5 different example packages are used to exercise different
scenarios of CPE_ID_* variables usage.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
