Hostapd TEAP support fails to build when internal TLS implementation
is selected. TEAP is still an experimental feature that is not
recommmended for production use. Currently it should not be used for
anything else than experimentation and interoperability testing.
Disable TEAP when internal TLS implementation is selected. Those
who needs experimenting with TEAP are encouraged to enable openssl
in their buildroot configuration.
Fixes:
http://autobuild.buildroot.net/results/f88/f880b1a430ebd6f97885103a622f1a4d9ec6de3a
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Hostapd v2.9 follows the approach taken by bridge-utils and attempts
to use new bridge ioctls whenever possible. New bridge calls are
enabled in hostapd build using NEED_LINUX_IOCTL configuration option.
That switch is enabled for all the practical configurations excluding
wired driver. However it is required to support dynamic VLANs in
any configuration.
Enable NEED_LINUX_IOCTL hostapd configuration option whenever
dynamic VLANs support is requested in buildroot.
Fixes:
http://autobuild.buildroot.net/results/71a/71aa92578622a266b4bed92b66a65438bc32cbd6
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
On some cases, when the package contains multiple license files
and some of them from the same type, the scanpypi script will write
the same license type more than once under _LICENSE.
Hence, before creating the _LICENSE variable, we'll remove every
possible duplication.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The RISCV Proxy Kernel (AKA BBL) isn't being used by most distros so has
very limited testing. It has been replaced by OpenSBI and been
deprecated for awhile, so let's just remove it.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Mainline kernel and u-boot both supports this board in mainline
from quite some time.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Switch to Linux kernel version 4.19.38 from the TI SDK 06.00.00.07
(TI SDK release date: 7.8.2019)
Added beaglebone blue
Updated uboot to version 2019.07
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Back in commit 025b863e6f, the option
BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS was introduced, to
separate the option that host packages needing Rust should depend on
(BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS) from the option that target
packages needing Rust should depend on
(BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS).
Since the example in the manual is showing a target package, we must
use BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Sam Voss <sam.voss@gmail.com>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Release notes:
https://blog.clamav.net/2019/10/clamav-01020-has-been-released.html
Added dependencies to libcurl and libmspack.
Although it is technically possible to build this package without
libcurl it makes no sense because only libclamav would be built by
passing the new configure option --enable-libclamav-only but this would
disable most of the package rendering the scan for viruses impossible.
Therefore we decided to make libcurl a mandatory dependency.
libmspack was added as dependency to avoid building the internally
provided code for this package, we prefer to provide needed libraries
ourselves. Linking against internally-built libmspack is broken anyway
but we do not bother to fix the problem, use system libmspack instead.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Needed for upcoming clamav version bump to 0.102.0.
Package passed test-pkg:
andes-nds32 [ 1/44]: OK
arm-aarch64 [ 2/44]: OK
br-aarch64-glibc [ 3/44]: OK
br-arcle-hs38 [ 4/44]: OK
br-arm-basic [ 5/44]: OK
br-arm-cortex-a9-glibc [ 6/44]: OK
br-arm-cortex-a9-musl [ 7/44]: OK
br-arm-cortex-m4-full [ 8/44]: OK
br-arm-full [ 9/44]: OK
br-arm-full-nothread [10/44]: OK
br-arm-full-static [11/44]: OK
br-i386-pentium4-full [12/44]: OK
br-i386-pentium-mmx-musl [13/44]: OK
br-m68k-5208-full [14/44]: OK
br-m68k-68040-full [15/44]: OK
br-microblazeel-full [16/44]: OK
br-mips32r6-el-hf-glibc [17/44]: OK
br-mips64-n64-full [18/44]: OK
br-mips64r6-el-hf-glibc [19/44]: OK
br-mipsel-o32-full [20/44]: OK
br-nios2-glibc [21/44]: OK
br-openrisc-uclibc [22/44]: OK
br-powerpc-603e-basic-cpp [23/44]: OK
br-powerpc64le-power8-glibc [24/44]: OK
br-powerpc64-power7-glibc [25/44]: OK
br-powerpc-e500mc-full [26/44]: OK
br-riscv32 [27/44]: OK
br-riscv64 [28/44]: OK
br-sh4-full [29/44]: OK
br-sparc64-glibc [30/44]: OK
br-sparc-uclibc [31/44]: OK
br-x86-64-core2-full [32/44]: OK
br-x86-64-musl [33/44]: OK
br-xtensa-full [34/44]: OK
linaro-aarch64-be [35/44]: OK
linaro-aarch64 [36/44]: OK
linaro-arm [37/44]: OK
sourcery-arm-armv4t [38/44]: OK
sourcery-arm [39/44]: OK
sourcery-arm-thumb2 [40/44]: OK
sourcery-mips64 [41/44]: OK
sourcery-mips [42/44]: OK
sourcery-nios2 [43/44]: OK
sourcery-x86-64 [44/44]: OK
44 builds, 0 skipped, 0 build failed, 0 legal-info failed
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit modifies the main() function so that it returns the sum of
build and legal errors, making sure the overall test-pkg script exists
with a non-zero error code upon failure.
Signed-off-by: Heiko Thiery <heiko.thiery@kontron.com>
[Thomas: improved commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
License is not included in the tarball, so we'll use PKG-INFO
(the license was added to the MANIFEST, and maybe included on the
next release).
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps python-pillow to version 6.2.0.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to 2019.10 and kernel to 5.3.4 version.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
QT_QPA_EGLFS_ALWAYS_SET_MODE=1 needs to be exported, otherwise the Qt5
Cinematic demo throws a storm of the following messages:
Could not queue DRM page flip on screen LVDS1 (Invalid argument)
Improve the instructions by mentioning such requirement.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit cf66a67112 ("package/glmark2: drm support needs udev")
udev is needed when the drm flavor is used.
Move from mdev to eudev in order to fix the following glmark2
build failure:
Unknown flavor: . Supported flavors are dispmanx-glesv2, drm-gl,
drm-glesv2, mir-gl, mir-glesv2, wayland-gl, wayland-glesv2, win32-gl,
win32-glesv2, x11-gl, x11-glesv2
Suggested-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
selinux-python only has two sub-options, so menuconfig is overkill.
Convert it to a normal config with indented sub-option.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The selinux-python package has two sub-packages, audit2allow and
sepolgen. Both of these repeat the dependencies (and comment) of the
top-level selinux-python package. Remove those redundant dependencies
(and comments).
This redundancy was introduced by commit 9d6da7a26. Originally, sepolgen
was a separate package and audit2allow was a sub-package of
policycoreutils, so both of them had these dependencies. When the two
options were moved into selinux-python, the dependencies stayed.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libselinux is now available on ARC, so we can re-enable the fastboot
option on this architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
policycoreutils no longer has the !BR2_arc dependency, so we can drop
it as well from refpolicy.
Note that in practice, we still can't enable refpolicy on ARC due to
BR2_PACKAGE_AUDIT_ARCH_SUPPORTS.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
libsemanage no longer has the !BR2_arc dependency, so we can drop it
as well from policycoreutils. In practice, we still can't select
policycoreutils on ARC due to BR2_PACKAGE_AUDIT_ARCH_SUPPORTS.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Now that libselinux is available on ARC, we can drop the !BR2_arc
dependency from libsemanage.
Note that in practice, libsemanage is still not available on ARC,
because BR2_PACKAGE_AUDIT_ARCH_SUPPORTS does not include the ARC
architecture. But still, it makes sense to drop that !BR2_arc which
was inherited from libselinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
libselinux is now available on ARC, so we can allow the selection of
restorecond on ARC as well.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
libselinux is now available on ARC, so we can re-enable the SELinux
support in Busybox on ARC as well.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
checkpolicy is now available on ARC, so we can re-enable building
audit2allow on ARC as well.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
libselinux is now available on ARC, so we can re-enable checkpolicy as
well.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
libselinux is now available on ARC, so we can re-enable setools as
well.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The build on ARC was disabled in commit
881845f5fc ("libselinux: mark as not
available on ARC") and since then the ARC toolchain support has made a
lot of progress. libselinux now builds fine on ARC, so we can
re-enable it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Now that policycoreutils is available on !glibc configurations, we can
also make refpolicy available for such configurations.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Now that libsemanage is available on non-glibc configurations, we can
also allow the selection of policycoreutils for such configurations.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
libsemanage was only available in glibc configurations, for three
reasons, which are all no longer true:
- The usage of fts.h by libselinux is now provided by the musl-fts
package when uClibc-ng or musl are used, which makes libselinux
available to all C libraries.
- libsemanage use of getpwent_r() has been removed by upstream commit
2c651e0a2822368c74587efe6ec920e64e72f37b ("genhomedircon: avoid use
of non-standard `getpwent_r`"), which is in SELinux since version
2.7
- audit is now available on musl, thanks to Buildroot commit
"package/audit: re-enable on musl", which backports an upstream
patch to make audit build with musl
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
libselinux can now be built on !glibc configurations, so we can
re-enable restorecond on !glibc configurations as well.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
