Building a minimal defconfig such as:
BR2_arm=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
BR2_TOOLCHAIN_EXTERNAL_URL="http://autobuild.buildroot.org/toolchains/tarballs/br-arm-full-2018.05.tar.bz2"
BR2_TOOLCHAIN_EXTERNAL_GCC_4_9=y
BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_1=y
BR2_TOOLCHAIN_EXTERNAL_LOCALE=y
BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_INIT_NONE=y
BR2_SYSTEM_BIN_SH_NONE=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XAPP_RGB=y
by running "make xapp_rgb" gives the following build failure:
checking for RGB... configure: error: in `/home/test/buildroot/output/build/xapp_rgb-1.0.6':
configure: error: The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.
Alternatively, you may set the environment variables RGB_CFLAGS
and RGB_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
The configure script uses pkg-config, but host-pkgconf is missing in
the list of dependencies.
This issue was detected thanks to per-package directory support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xdm uses the appdefaultdir variable from xt.pc to decide where to
install things. Since DESTDIR is prepended to the install destination,
this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/08bcba7d7340f34dc66b5b2ab8fbcfbaee309e37
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xditview uses the appdefaultdir variable from xt.pc to decide where
to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/af70962c59ca3dd29d85207033125b2e7eda3e81
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xfd uses the appdefaultdir variable from xt.pc to decide where to
install things. Since DESTDIR is prepended to the install destination,
this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/ea9884f4d676849d643d53275ebbc8668074a418
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xclock uses the appdefaultdir variable from xt.pc to decide where
to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/ea028467a981f419c395158c55aa9a6d16e3f2c1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xedit uses the appdefaultdir variable from xt.pc to decide where to
install things. Since DESTDIR is prepended to the install destination,
this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/1b46f950fc0d957d04c0a60a24176d701ff16bd9
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xmap uses the appdefaultdir variable from xt.pc to decide where to
install things. Since DESTDIR is prepended to the install destination,
this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/725c20ec9621a9c2d4b94784785bb481ff74f0e7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xmag uses the appdefaultdir variable from xt.pc to decide where to
install things. Since DESTDIR is prepended to the install destination,
this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/37dd630639a0d76e8121b3cca9e0e1f305ad620b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_oclock uses the appdefaultdir variable from xt.pc to decide where
to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/77c57f68039b4490e70a3d15ca6f4b9e945d12e7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xconsole uses the appdefaultdir variable from xt.pc to decide
where to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/959986ce1411f14d84da4aafaeb965bf9a847c7c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xload uses the appdefaultdir variable from xt.pc to decide where to
install things. Since DESTDIR is prepended to the install destination,
this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/722c1bdfb3f38a13be7a40793a8df4f0324885f4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xmessage uses the appdefaultdir variable from xt.pc to decide
where to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/ca1ce01dfef8b1a9cbb27e444c0c884f37f9cd7c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xclipboard uses the appdefaultdir variable from xt.pc to decide
where to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/bbca1f77fc5beb1878c43b1abcad64b8e35a77e6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_editres uses the appdefaultdir variable from xt.pc to decide
where to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/938a91641c277c905e77779afe2d0e2ce92ed76d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_bitmap uses the appdefaultdir variable from xt.pc to decide where
to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/44bed7a9251e108f0c3bc8654b757ccc031a1187
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_xcalc uses the appdefaultdir variable from xt.pc to decide where to
install things. Since DESTDIR is prepended to the install destination,
this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/6d906fc092e86ecf4214a69a5f087efabab4ade8
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_viewres uses the appdefaultdir variable from xt.pc to decide where
to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/71b5fb2b5df30e25dacdef71f7aaddbecbf8bde6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
xapp_beforelight uses the appdefaultdir variable from xt.pc to decide
where to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.
Fixes:
- http://autobuild.buildroot.org/results/164bb80f261f48525de508b5f74321f2fec91cce
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The xlib_libfontenc configure.ac uses PKG_CHECK_MODULES(), but the
Buildroot package does not have a dependency on host-pkgconf. This
causes a build failure with per-package host/target folders, or if one
builds just with "make xlib_libfontenc", which is why it was never
detected by the autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The libXdmcp configure script uses pkg-config, but the Buildroot
package does not depend on host-pkgconf. This is not seen by the
autobuilders most likely because another package that is always built
before libXdmcp builds pkg-config.
However, running:
$ make xlib_libXdmcp
triggers the following build failure:
checking pkg-config is at least version 0.9.0... ./configure: line 12323: /home/thomas/projets/buildroot/output/host/bin/pkg-config: No such file or directory
no
[...]
checking for XDMCP... configure: error: in `/home/thomas/projets/buildroot/output/build/xlib_libXdmcp-1.1.2':
configure: error: The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.
This was detected using per-package target/host folders, because with
this, only the dependencies explicitly expressed by a package are
available to the package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The configure script of xutil_makedepend uses PKG_CHECK_MODULES(), so
it should depend on host-pkgconf. Otherwise, a "make
host-xutil_makedepend" fails with:
"""
checking for X... configure: error: in `/home/thomas/projets/buildroot/output/build/host-xutil_makedepend-1.0.5':
configure: error: The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.
Alternatively, you may set the environment variables X_CFLAGS
and X_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
To get pkg-config, see <http://pkg-config.freedesktop.org/>.
"""
This was detected using per-package host/target directories, but can
be reproduced without it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit 2524acd417
("package/x11r7/xlib_libxshmfence: bump version to 1.3"), the patch
0001-configure.ac-call-AC_USE_SYSTEM_EXTENSIONS.patch was dropped, but
the corresponding AUTORECONF = YES was not dropped.
This causes a build issue if just xlib_libxshmfence is built (using
"make xlib_libxshmfence" or using per-package host/target directories):
>>> xlib_libxshmfence 1.3 Autoreconfiguring
configure.ac:40: error: must install xorg-macros 1.3 or later before running autoconf/autogen
configure.ac:40: the top level
This commit fixes that by dropping the no longer needed
AUTORECONF = YES.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Nine years ago we added autoreconf to fix libtool-related problems
with the matchbox package:
https://git.buildroot.net/buildroot/commit/?id=51ef5b81224c243aa7f937c4690b1a120c81ccbc
After building this defconfig with autoreconf removed from this package
BR2_x86_64=y
BR2_x86_core_avx2=y
BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XLIB_LIBXFONT=y
BR2_PACKAGE_MATCHBOX=y
BR2_PACKAGE_MATCHBOX_SM=y
BR2_PACKAGE_MATCHBOX_COMMON=y
BR2_PACKAGE_MATCHBOX_COMMON_PDA=y
BR2_PACKAGE_MATCHBOX_DESKTOP=y
BR2_PACKAGE_MATCHBOX_KEYBOARD=y
BR2_PACKAGE_MATCHBOX_PANEL=y
BR2_PACKAGE_MATCHBOX_STARTUP_MONITOR=y
it is obvious that the problem which existed nine years ago seems to be
gone, therefore we remove autoreconf from this package because there is
no need for it anymore.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Nine years ago we added autoreconf to fix libtool-related problems
with the matchbox package:
https://git.buildroot.net/buildroot/commit/?id=51ef5b81224c243aa7f937c4690b1a120c81ccbc
Autoreconf for this package needs the xutil_util-macros but after
building this defconfig with autoreconf removed from this package
BR2_x86_64=y
BR2_x86_core_avx2=y
BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XLIB_LIBXFONT=y
BR2_PACKAGE_MATCHBOX=y
BR2_PACKAGE_MATCHBOX_SM=y
BR2_PACKAGE_MATCHBOX_COMMON=y
BR2_PACKAGE_MATCHBOX_COMMON_PDA=y
BR2_PACKAGE_MATCHBOX_DESKTOP=y
BR2_PACKAGE_MATCHBOX_KEYBOARD=y
BR2_PACKAGE_MATCHBOX_PANEL=y
BR2_PACKAGE_MATCHBOX_STARTUP_MONITOR=y
it is obvious that the problem which existed nine years ago seems to be
gone. So instead of fixing autoreconf we remove it from this package
because there is no need for it anymore.
Fixes
http://autobuild.buildroot.net/results/30c/30cf5cc139f9f6a9dc070953270f74e18b9310d4/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The new package xorgproto will combine and replace all current xproto_*
packages. For details read
https://lists.x.org/archives/xorg-announce/2018-February/002835.html
After switching to xorgproto the old xproto_* packages are removed.
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The new package xorgproto will combine and replace all current xproto_*
packages. For details read
https://lists.x.org/archives/xorg-announce/2018-February/002835.html
Removed special handling for various xproto packages because xorgproto
always installs all available protocols.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The new package xorgproto will combine and replace all current xproto_*
packages. For details read
https://lists.x.org/archives/xorg-announce/2018-February/002835.html
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The new package xorgproto will combine and replace all current xproto_*
packages. For details read
https://lists.x.org/archives/xorg-announce/2018-February/002835.html
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The new package xorgproto will combine and replace all current xproto_*
packages. For details read
https://lists.x.org/archives/xorg-announce/2018-February/002835.html
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The new package xorgproto will combine and replace all current xproto_*
packages. For details read
https://lists.x.org/archives/xorg-announce/2018-February/002835.html
Removed special dri2/dri3 handling because xorgproto always installs
dri3proto.
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The new package xorgproto will combine and replace all current xproto_*
packages. For details read
https://lists.x.org/archives/xorg-announce/2018-February/002835.html
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The new package xorgproto will combine and replace all current xproto_*
packages. For details read
https://lists.x.org/archives/xorg-announce/2018-February/002835.html
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
