Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Adam Duskett <aduskett@gmail.com>
Cc: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Install the sysvinit scripts, for the moment, but not S02sysctl, since
openrc provides /etc/init.d/sysctl.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The scripts were already the same, except for some comments, so make the
busybox S02sysctl a symlink to the procps-ng one, which works with both
versions of the "sysctl" utility.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It was searching for CONFIG_ASH=y and CONFIG_HUSH=y at $(@D)/.config,
which does not contain the package build path at the target-finalize
step. Use $(BUSYBOX_DIR), instead.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Busybox 1.31.1 fails to build with glibc 2.31 due to the removal of
stime() from glibc. Pull a patch already applied upstream to fix the
problem.
The patch was rebased on version 1.31.1 to minimize the change, since
the original one depended on a previous commit which is not worthwhile
to pick.
Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN. <yann.morin.1998@free.fr>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Busybox 1.31.1 fails to build with musl 1.2.0 due to the direct use of
__NR_clock_gettime. Pull four patches already applied upstream to fix
the problem.
The patches were rebased to version 1.31.1 to minimize the change, since
the original ones depended on a previous commit which is not worthwhile
to pick.
Fixes:
http://autobuild.buildroot.net/results/f45f91aea6deee6699eabdfa618ac44873b8da51/
Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN. <yann.morin.1998@free.fr>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Call BUSYBOX_INSTALL_INDIVIDUAL_BINARIES in BUSYBOX_INSTALL_TARGET_CMDS,
not in BUSYBOX_INSTALL_INIT_SYSV. This should have been done in commit
b1e07d6d79 but was somehow lost during the
review/aply process.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The default inittab files added by busybox and sysvinit run 'swapon -a'
during init and 'swapoff -a' during shutdown.
But, the swapon/swapoff programs are not guaranteed to be
available. For the busybox versions, it is steered by
CONFIG_SWAPON/CONFIG_SWAPOFF. For the util-linux versions, it is steered by
BR2_PACKAGE_UTIL_LINUX_BINARIES.
In a case where swapon/swapoff is not available but the inittab tries to
execute them, the boot log would be polluted by error messages like:
swapon: not found
Avoid this by commenting out the swapon/swapoff lines if the swapon/swapoff
binaries are not available.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[Peter: test with -x]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following commit 0dcb5513ef
("package/refpolicy: remove dependency on policycoreutils"), we have a
build failure on some configurations:
Makefile:571: *** libselinux is in the dependency chain of busybox that has added it to its _DEPENDENCIES variable without selecting it or depending on it from Config.in. Stop.
This is because refpolicy selects the busybox SELinux support when
Busybox is enabled, which it turns selects libselinux, but we no
longer pay attention to the libselinux dependencies while doing this.
Since it's quite weird to have refpolicy mess with Busybox SELinux
support, this commit changes the logic to have Busybox automatically
enable its SELinux support as soon as SELinux support is enabled,
while still allowing it to be disabled.
Fixes:
http://autobuild.buildroot.net/results/5d8fda7c488a03c14942d87467d501acd633d24a/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If a inittab file was already provided in the skeleton, don't overwrite
it with the one that comes with the busybox package.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
udhcpc6 implements "stateful" DHCPv6 for explicitly requesting an address
and other configuration information. A major difference between DHCPv4
and DHCPv6 is that DHCPv6 does *not* advertise a default route; this is
determined by normal IPv6 autoconfiguration.
Add logic to wait up to IF_WAIT_DELAY seconds for the IPv6 route to be
configured; as above this doesn't come from DHCPv6 but rather the IPv6
Router Advertisement (RA) which happens independently from udhcpc6. The
intent here is to try and ensure that the interface is route-able upon the
script's completion as it would be if called from udhcpc.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
udhcpc6 will call the default script with the stateful address set in the
"ipv6" variable. Set "ip" to this address if present, using the /128 prefix
used by stateful DHCPv6 so the existing renew/bound logic can be used like
in DHCPv4.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the "Run a getty" option is disabled, busybox doesn't remove the
/etc/inittab line from previous builds. With this patch, the line is
correctly commented out.
Signed-off-by: Stephen Bos <stephen.bos@hagergroup.com>
Co-authored-by: Stephen Bos <stephen.bos@hagergroup.com>
Co-authored-by: Christophe Blaess <christophe.blaess@logilin.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libselinux is now available on ARC, so we can re-enable the SELinux
support in Busybox on ARC as well.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
libselinux can now be selected for non-glibc toolchains, so
BR2_PACKAGE_BUSYBOX_SELINUX can loose its BR2_TOOLCHAIN_USES_GLIBC
dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add a simple init script that invokes sysctl early in the initialization
process to configure kernel parameters. This is already performed by
systemd (systemd-sysctl) but there is no sysvinit/busybox counterpart.
Files are read from directories in the following list in the given order
from top to bottom:
/run/sysctl.d/*.conf
/etc/sysctl.d/*.conf
/usr/local/lib/sysctl.d/*.conf
/usr/lib/sysctl.d/*.conf
/lib/sysctl.d/*.conf
/etc/sysctl.conf
A file may be used more than once, since there can be multiple symlinks
to it. No attempt is made to prevent this.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The domain search option is from RFC3397, not RFC3359 (which is about TLV
codepoints), so fix that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is useful in networks with internal resources as it allows
to use much shorter names.
E.g. instead of "server.internal.company.com" it's possible
to use just "server" if DHCP server is configured with:
---------------------------->8-----------------------
option domain-search "internal.company.com";
---------------------------->8-----------------------
This improvement consists of 2 parts:
1. Enable handling of RFC3397 so DHCP client is ready for processing
corresponding data from DHCP server.
2. Some DHCP servers always send out search list if it is set in server's
configuration and some servers only provide search list if client
asks for that (sending list of options it expects to get).
And exactly for those stubborn DHCP servers we need to add "-O search"
to udhcp's command line via CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Ignacy Gawedzki <ignacy.gawedzki@green-communications.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Enable the mdev daemon mode in Busybox default config
- Update the S10mdev init script to use the daemon mode
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove 0003-libbb-mark-scripted_main-as-externally-visible.patch
as it was committed upstream in 3193cb56d6
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
dosfstools and busybox may each install mkfs.vfat, so dosfstools must
be installed before busybox.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From the help test of individual binaries:
With this option enabled, each applet is a separate binary, which is
needed for proper operation with SELinux
As such, it makes sense to select this option when SELinux support is
selected as well.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
http://autobuild.buildroot.org/results/053/0539b3765eaa99029c4185ae89db6adb9e867078/
Kudos to Thomas for pinpointing the actual issue.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
base64 reuses the uuencode logic, so only adds very little extra overhead,
is enabled by default upstream and is used more often than uuencode - So
enable it in the default busybox config.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update from version 1.29.3 to 1.30.1. The new version
includes the removed patches.
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Patch to resolve CVE-2019-5747 which affects versions prior
to 1.30.0
More information can be found at:
https://nvd.nist.gov/vuln/detail/CVE-2019-5747
This applies to both master and 2019.02
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Patch to resolve CVE-2018-20679 which affects versions prior
to 1.30.0
More information can be found at:
https://nvd.nist.gov/vuln/detail/CVE-2018-20679
This applies to both master and 2019.02
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit 50dc350c65 (package/busybox: update to 1.29.0), we no
longer define the BUSYBOX_NOCLOBBER_INSTALL macro, so it expands to an
empty string, so we end up with no action in BUSYBOX_CONFIGURE_CMDS.
Drop BUSYBOX_CONFIGURE_CMDS now that it serves no purpose.
Signed-off-by: Yann MORIN <yann.morin@orange.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Adam Duskett <aduskett@gmail.com>
Cc: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Split S01logging into S01syslogd and S02klogd. Install them only if no
other syslog package is selected and the corresponding daemons are
selected in the Busybox configuration.
- Support /etc/default/$DAEMON configuration files.
- Detect and report start/stop errors (previous version ignored them and
always reported OK).
- Use a separate function for restart.
- Implement reload as restart.
The dependency of busybox on rsyslog and syslog-ng was only needed
because those packages also installed S01logging. Since now they no
longer install the same file, these dependencies are no longer needed.
The dependency on sysklogd is still needed since that one installs the
syslogd and klogd executables with the same name as busybox.
The -n option of syslogd/klogd is obligatory because start-stop-daemon
starts it in the background. Therefore, move it out of the
SYSLOGD_ARGS resp. KLOGD_ARGS variable so the user can no longer remove
it.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Arnout: keep dependency on sysklogd]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Remove 0003-Revert-libbb-remove-unnecessary-variable-in-xmalloc_.patch
It caused a segfault which was fixed in this release.
Signed-off-by: Ferdinand van Aartsen <ferdinand@ombud.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Busybox 1.29.0 introduces a regression causing head to fail with negative
'-n' parameters, e.g. 'head -n -1'. Instead of showing all but the last one
line, no lines are printed whatsoever.
The issue was reported with
http://lists.busybox.net/pipermail/busybox/2018-August/086617.html . This
commit backports the revert applied upstream.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We sometimes create dangling symlinks in the target directory. That is
because we need canonical targets, as relative targets don't work well
with BR2_ROOTFS_MERGED_USR. For example, the vim package installs the
/bin/vi symlink to /usr/bin/vim. This symlink might be dangling when the
build host has no vim installed there.
Patch the busybox install.sh script to avoid clobber of dangling
symlinks.
Fixes:
http://autobuild.buildroot.net/results/796/796107430db6545401d9926e84f19eaf2040b756/
Cc: Adam Duskett <aduskett@gmail.com>
Cc: Carlos Santos <casantos@datacom.com.br>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Includes fixes to sendmail and wget.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
attr and busybox may each install setfattr, so attr must be installed
before busybox.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
