When using the --with-icu option without specifying the directory, boost's
bootstrap.sh script will look at "common" locations (lines 289-294):
COMMON_ICU_PATHS="/usr /usr/local /sw"
for p in $COMMON_ICU_PATHS; do
if test -r $p/include/unicode/utypes.h; then
ICU_ROOT=$p
fi
done
With buildroot it may surely become problematic at some point.
Signed-off-by: Ignacy Gawędzki <i@lri.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libgpg-error installs a gpg-error-config script, but it wasn't fixed
up properly. Use the <pkg>_CONFIG_SCRIPTS to handle this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The packages changed by this commit were not only changing prefix= and
exec_prefix= during their <foo>-config fixups, they were also changing
includedir= and/or libdir=. So, they could not be directly converted
to the new <pkg>_CONFIG_SCRIPTS infrastructure.
However, a careful analysis of their default <foo>-config shows that
includedir= and libdir= is defined relatively to either ${prefix} and
${exec_prefix}. Therefore, the manual fixing of includedir= and
libdir= is useless, and fixing prefix= and exec_prefix=, as done by
the <pkg>_CONFIG_SCRIPTS mechanism is sufficient.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Use the <pkg>_CONFIG_SCRIPTS mechanism in all packages for which it
does all what the package was doing. A few packages, like libxslt, are
for now left out, since they need some additional fixup (for example a
fixup of includedir).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The <foo>-config scripts are useless on the target, since they are
only needed for development, so we remove them automatically.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit renames the newly introduced <pkg>_CONFIG_FIXUP variable
to <pkg>_CONFIG_SCRIPTS, for two reasons:
* <pkg>_CONFIG_SCRIPTS will not only "fixup" the scripts in
$(STAGING_DIR)/usr/bin, but also remove them from
$(TARGET_DIR)/usr/bin. So it is not only about doing a "fixup".
* On the principle, it is strange that the variable carries an
indication of the action that will take place on those files. It
should rather be named to say "Here are the <foo>-config scripts",
and let the package infrastructure decide if it should fix them up,
remove them, etc.
This commit also updates the documentation accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This makes it possible to put empty directories in the overlay.
Thanks to Aras Vaichas for pointing that out.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since the post-image config option uses the plural for "Custom
scripts", do the same for the post-build config option, for
consistency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The order of the solutions to customize the root filesystem is
changed: we now mention the post-build script mechanism *before* the
custom root filesystem skeleton mechanism, because the former is
preferred over the latter.
In addition to this, we give a few more details about direct
customization of the root filesystem in output/target, and about the
custom target skeleton solution.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This mechanism of root filesystem customization has been deprecated
since a long time, so let's remove it now.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: fix minor typos]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Just like we have a post-build script mechanism that gets executed
after the build of all packages but before the creation of the
filesystem images, let's introduce a post-image script mechanism, that
gets executed once all filesystem images have been generated.
This can for example be used to call a tool building a firmware image
from different images generated by Buildroot, or automatically extract
the tarball root filesystem image into some location exported by NFS,
or any other custom action.
[Peter: fix image script check]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Kconfig does not accepts that a symbol that is part of a choice
be affected a default value.
Fix this by introducing a dummy EABI symbol, and make the real
EABI symbol a prompt-less option that depends on !OABI.
[Peter: drop arm dependency, rename to EABI_CHOICE]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes http://autobuild.buildroot.org/results/e184fcb1c100e9d8aa3d9f18a8caee8c0839e207
Contrary to what the .mk file states, proxychains-ng doesn't use autotools.
Instead it uses a handwritten configure script, so convert it to
generic-package.
This handwritten configure script generates config.mak which is then
included by the Makefile. Unfortunately config.mak does:
CC ?= $(TARGET_CC)
But as make sets CC to 'cc' by default, this never does anything - So
it ends up using the host compiler (and target CFLAGS), breaking the build.
Fix it by passing the correct CC setting at build time as well.
While we're at it, also cleanup the package by using 'make install-config'
to install the configuration file.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update {ea3250,fdi3250,phy3250}_defconfig to lock down kernel headers to
an appropiate version.
Otherwise the target is building with, at the moment of this writing,
version 3.7 headers and a 2.6.34 kernel which usually isn't wise.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BR2_ARM_EABI config symbol is still kept in order to minimize
the impact.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The manual linux headers option may specify versions other than the 2.6
series, so drop the "2.6"
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libsndfile requires sizeof(sf_count_t) == 8, where sf_count_t is a
typedef alias for off_t. This is not true by default for all
tool-chains, which leads to a runtime assert failure in binaries
compiled against libsndfile. See:
http://permalink.gmane.org/gmane.comp.audio.libsndfile.devel/229
Add a dependency on BR2_LARGEFILE for libsndfile, and a comment if
BR2_LARGEFILE is not selected.
[Thomas: rebased patch, added more propagation of the new
BR2_LARGEFILE dependency to gst-plugins-good and mpd.]
Signed-off-by: Ryan Mallon <rmallon@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Store BR2_DEFCONFIG in .config, and use it to update the original input
defconfig file after updating the configuration. When a config is
created by using the BR2_DEFCONFIG=... option, this is saved in the
.config file; later runs of savedefconfig will update that same location.
It is also possible to configure this place in the interactive
configuration.
The BR2_DEFCONFIG value itself is not saved into the generated
defconfig, since Kconfig considers it at its default. This is
intentional, to avoid hard-coding an absolute path in the defconfig.
It will anyway be set again when the defconfig is used with the
'make BR2_DEFCONFIG=... defconfig' command.
As a side-effect of this change, the *config options have been moved out
of the BR2_HAVE_DOT_CONFIG condition. This doesn't make any functional
difference, because the .config is still not read for the *config targets.
However, the defconfig and savedefconfig targets do need to include
.config now, which makes them slightly slower.
[Peter: slightly tweak help text]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Before the config file can be copied, it has to exist. The
other xxx-update-config targets do this as well.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
