If present, GDB may use a system installed libiberty. As such, we must ensure
that host-libiberty is installed first.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add gdb build for C-SKY Architecture:
- Support host-gdb
- Support gdbserver for target
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
https://sourceware.org/ml/gdb-announce/2018/msg00001.html
gdb 8.1 has a new optional dependency on mpfr, which according to the
NEWS file:
GDB now uses the GNU MPFR library, if available, to emulate target
floating-point arithmetic during expression evaluation when the
target uses different floating-point formats than the host. At
least version 3.1 of GNU MPFR is required.
So for the target gdb, this is unnecessary, and therefore we
forcefully disable mpfr support by passing --without-mpfr.
For the host gdb, it would potentially be useful, but since it's a new
feature that isn't essential, we for now keep it disabled as well. An
option may be added later if needed.
To avoid gnulib issues with uClibc/musl, we need to pass additional
configure/make variables, like is done in OpenEmbedded [1].
[1] http://git.openembedded.org/openembedded-core/tree/meta/recipes-devtools/gdb/gdb_8.1.bb?id=02664a8dcd1ebb6cd77248e1b97a78390ea06033#n9
We re-add the same patches as the ones present for gdb 8.0.1, except
0004-nat-linux-ptrace.c-add-missing-gdb_byte-cast.patch, which was
merged upstream.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: change mpfr handling.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The gdb configure script is given --enable-gdbserver when
BR2_PACKAGE_GDB_SERVER is set, but it is not given --disable-gdbserver
when BR2_PACKAGE_GDB_SERVER is unset.
gdb gdb/configure.ac defaults to enabling gdbserver in "native"
(host=target) cases, which is always the case when buildroot builds a
gdb which runs on the target hardware. The gdbserver will overwrite
BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY gdbserver, if any.
Fix that by passing --disable-gdbserver when BR2_PACKAGE_GDB_SERVER is
unset.
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If one wants to use GDB with python support on the target, you need the support
files installed by GDB. These get usually deleted to save some space, so I just
wrapped the Makefile code deleting them in a conditional block depending on if
python support is active or not.
Signed-off-by: Jonas Zaddach <jzaddach@cisco.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- use positive logic "if python is disabled"
- put the comment inside the condition, as suggested by Arnout]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The gdb install target installs dynamic versions of libbfd and
libopcode, accidentally overwriting the binutils provided versions
(gdb itself links against the bundled static ones to avoid
version problems, so the dynamic ones are un-needed).
Prevent the installation by using the '--disable-install-libbfd'
configure option.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Microblaze support was never upstreamed in gdb. We currently use a gdb
from the Xilinx Github repository, but this gdb is based on 7.6, and
has never been updated in the last 4 years. There are no other active
branches at https://github.com/Xilinx/gdb/branches.
Xilinx has a slightly newer gdb, based on 7.7, available at
https://github.com/Xilinx/meta-xilinx/tree/master/recipes-microblaze/gdb. However,
it's apparently only available in the form of stack of big patches
(https://github.com/Xilinx/meta-xilinx/tree/master/recipes-microblaze/gdb/files).
Currently, gdb on Microblaze fails to build in various conditions:
* Against glibc, with "error: conflicting types for 'ps_lgetfpregs'"
* Against musl, with "error: unknown type name 'elf_gregset_t'"
While those issues can probably be fixed, the fact that there is no
active upstream significantly reduces the incentive to fix those
problems.
Therefore, let's drop support for gdb on Microblaze entirely.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Both our target and host gdb depend on ncurses (host-ncurses for
host-gdb, of course). However, while for the target we passs
--with-curses, we are not doing this for the host variant. Due to
this, host-gdb default to using the termcap library: if such a library
is available on the build system, it will be used instead of the
host-ncurses we have built. This causes the host gdb binary to depend
on a library that we do not provide in $(HOST_DIR), breaking the
principle of a standalone SDK (which should only depend on the C
library).
To solve this, we simply pass --with-curses in HOST_GDB_CONF_OPTS,
which forces host-gdb to use the host-ncurses library.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It can be interesting to get the overlay from a remote server, rather
than expect it to be present locally.
Since that file can be any URL, we can't know its hash, so we just
exclude it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
[Thomas: use DL_DIR instead of BR2_DL_DIR.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
currently, specifying a custom Xtrensa core is done with two variables:
- the core name
- the directory containing the overlay tarball
However, the core name only serves to construct the tarball name, and is
not used whatsoever to configure any of the toolchain components
(binutils, gcc or gdb), except through the files that are overlayed in
their respective source trees.
This has two main drawbacks:
- the overlay file must be named after the core,
- the tarball can not be compressed.
Furthermore, it also makes it extremely complex to implement a download
of that tarball.
So, those two variables can be squeezed into a single variable, that is
the complete path of the overlay tarball.
Update the qemu-xtensa defconfig accordingly.
Note: we do not add a legacy entry for BR2_XTENSA_CORE_NAME, since it
was previously a blind option in the last release, and there's been no
release since we removed BR2_XTENSA_CUSTOM_NAME. So, we just update the
legacy comments for BR2_XTENSA_CUSTOM_NAME, since that's all the user
could have seen in any of our releases so far.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/bin' | xargs sed -i 's%$(HOST_DIR)/usr/bin%$(HOST_DIR)/bin%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for LGPLv2/LGPLv2+ is LGPL-2.0/LGPL-2.0+.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/LGPLv2(\+)?/LGPL-2.0\1/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for LGPLv3/LGPLv3+ is LGPL-3.0/LGPL-3.0+.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/LGPLv3(\+)?/LGPL-3.0\1/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for GPLv3/GPLv3+ is GPL-3.0/GPL-3.0+.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/\<GPLv3\>/GPL-3.0/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license strings as much as possible.
SPDX short identifier for GPLv2/GPLv2+ is GPL-2.0/GPL-2.0+.
This change is done by using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/\<GPLv2\>/GPL-2.0/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Starting with glibc 2.25, the proc_service.h header has been copied
from gdb to glibc so other tools can use it. However, that makes it
necessary to make sure that declaration of prfpregset_t declaration
is consistent between gdb and glibc. In gdb, however, there is a
workaround for a broken prfpregset_t declaration in glibc 2.3 which
uses AC_TRY_RUN to detect if it's needed, which doesn't work in
cross-compilation. So pass the cache option to configure.
It needs to be passed to GDB_CONF_ENV to build gdbserver only but
also to GDB_MAKE_ENV, because otherwise it does not get passed to the
configure script of nested packages while building gdbserver with full
debugger.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
... like it is done for gcc.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
... instead of re-computing them over-and-over-again.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The previous fix [1] reinroduced the issue fixed by [2].
So keep gl_cv_func_gettimeofday_clobber=no in GDB_CONF_ENV
and GDB_MAKE_ENV.
Fixes:
http://autobuild.buildroot.net/results/ec6/ec60d436bd34a4f37b664e4124d7f0c96e90a1be
[1] faf38b78ae
[2] 560334bb2a
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The commit [1] doesn't fix this issue for all cases (it doesn't work
when BR2_PACKAGE_GDB_DEBUGGER=y).
So, leave the configure script alone and override
gl_cv_func_gettimeofday_clobber from GDB_MAKE_ENV.
[1] 560334bb2a
Fixes:
http://autobuild.buildroot.net/results/719/719a441421030b79c0aa1bbfb707130f3ac87338
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gdb 7.12+ by default builds with a C++ compiler, which naturally doesn't
work when we don't have C++ support in the toolchain.
Fix it by passing --disable-build-with-cxx for such setups.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gdb arc-2016.09-rc1 is based on upstream 7.12 gdb version where we can
still disable C++ build. For more information take a look at:
https://sourceware.org/gdb/wiki/cxx-conversion
We wanted to build gdb with C++ as it is used as default in 7.12
and is even a mandatory requirement since 2016/09.
But unfortunately we missed one runtime failure that C++ build causes
and so now we have to disable C++ build.
When gdb arc-2016.09-rc1 is built as a C++ application it segfaults at
runtime for ARC.
We are going to fix the issue in 2017.03 ARC toolchain release. and
before this we remove C++ dependency are adding temporary workaround
to prevent runtime segfaults.
The workaround is to disable building gdb as C++ application via
passing --disable-build-with-cxx config option when building gdb for
ARC.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 12306a81f8 (gdb: get rid of host-texinfo dependency) tried to
append MAKEINFO=true to the host/target make install arguments, but as the
default values for these are only added when (host-)autotools-package is
evaluated (and only if empty), this effectively drops the default values and
we ended up without the 'install' target and nothing got installed.
To fix this, specify the full install arguments.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host-texinfo dependency in gdb/host-gdb was added because gdb insisted
in building info documentation in recent versions, and we want to avoid
'makeinfo' to be present on the build system.
However, there is another solution that does not require actually building
host-texinfo: instruct the makefiles to use a dummy makeinfo command
('true').
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Starting with gdb 7.11, the bundled gnulib want to use rpl_gettimeofday
(gettimeofday replacement) due bad guessing when cross-compiling with musl
and uClibc toolchains. Instead of patching gnulib configure script to fix
the test, use gl_cv_func_gettimeofday_clobber=no to not use rpl_gettimeofday.
Thanks to Thomas Petazzoni to suggest this patch.
Reported upstream:
https://sourceware.org/bugzilla/show_bug.cgi?id=19798
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Starting with gdb 7.10, gdb wants to re-generate its documentation.
We were trying to avoid that by patching the Makefiles, but it wasn't
working in all situations. So, we simply add a dependency on
host-texinfo in all case.
Fixes:
http://autobuild.buildroot.net/results/f72/f72eac3e2f995e93f0e8f215e68ce4356a696dcb
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gdb versions fetched from git (such as the ARC version) will not build
with host-flex and host-bison.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Just like binutils, when gdb is fetched from git, it wants to
re-generate its documentation. We were trying to avoid that by patching
the Makefiles, but it wasn't working in all situations.
So, we simply add a dependency on host-texinfo when gdb is fetched from
git, and remove our hackhish work-around.
Fixes:
http://autobuild.buildroot.net/results/80e63edc009d23cb939880a6f5ae2f220f07a96a/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add an option to enable GDB simulator support, so
it can be used to test some no-MMU systems.
Newer GDB Blackfin Simulator need a workaround for in-tree compile.
It doesn't break for older Buildroot supported GDB Blackfin
Simulator.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's been deprecated for a year now so remove it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported in...
https://bugs.busybox.net/show_bug.cgi?id=8786
..., gdb fails to build with xz and expat support at the same time when
using an external toolchain.
This is how the problem is shown:
checking for liblzma... no
configure: error: missing liblzma for --with-lzma
And having a deeper look in gdb/config.log we can se a message like this
one:
/lib64/liblzma.so.5: undefined reference to `clock_gettime@GLIBC_2.17'
As Thomas said in the bug report quoted above, that error is related to
the fact that it find the host's lzma.
Adding --with-lzma-prefix=$(STAGING_DIR)/usr to GDB_CONF_OPTS fixes the
problem.
Credit-to: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Our previous patch to disable the documentation in gdb wasn't complete.
There are cases where the documentation under bfd and gprof directories
is being built, causing the subsequent failure due to missing makeinfo.
This patch fixes that problem.
Fixes:
http://autobuild.buildroot.org/results/244/2442e697d8a300496434fd42fcb1ee3941d13e06/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Force gdb to not build the documentation. This way we avoid depending on
host-texinfo. This is a temporary fix until upstream accepts a proposed
--disable-docs configure option.
Since the documentation will not be build at all, we can remove the
parts related to host-texinfo and MAKEINFO in the gdb.mk file.
Fixes:
http://autobuild.buildroot.net/results/dd5/dd50ed99abb2c8495def826866b184030953f90e/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Brendan Heading <brendanheading@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 23413b51b2 added --with-expat
configure option and expat dependency when BR2_PACKAGE_EXPAT is
configured. When cross-compiling, gdb configure fails because the host
system libexpat is referenced.
Configuring gdb with
--with-libexpat-prefix=$(STAGING_DIR)/usr
fixes the reference and allows gdb to build successfully.
Tested with arm-buildroot-linux-gnueabihf toolchain.
Signed-off-by: Doug Kehn <rdkehn@yahoo.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit doesn't touch infra packages.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add gdb version 7.9, and adjust the tarball logic to default to .tar.xz
(for 7.8 & 7.9), fall back to .tar.bz2 for 7.7.x and leave the rest
alone.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently we only add "host-texinfo" dependency for host GDB built
from git sources. But in case of target gdb texinfo won't be built
and so gdb building will fail on attempt to build documentation.
Fix is trivial - add "host-texinfo" as a dependency for target gdb
in the sme way as we disable documentation building via both
GDB_CONF_ENV (for target) and HOST_GDB_CONF_ENV (host) GDB flavors.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit bumps to 7.8.1, and updates the logic to use .tar.xz
tarballs so that it applies to all 7.8.x versions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Buildroot coding style defines one space around make assignments and
does not align the assignment symbols.
This patch does a bulk fix of offending packages. The package
infrastructures (or more in general assignments to calculated variable
names, like $(2)_FOO) are not touched.
Alignment of line continuation characters (\) is kept as-is.
The sed command used to do this replacement is:
find * -name "*.mk" | xargs sed -i \
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*$#\1 \2#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\]\+\)$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\ \t]\+\s*\\\)\s*$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\(\s*\\\)#\1 \2\3#'
Brief explanation of this command:
^\([A-Z0-9a-z_]\+\) a regular variable at the beginning of the line
\([?:+]\?=\) any assignment character =, :=, ?=, +=
\([^\\]\+\) any string not containing a line continuation
\([^\\ \t]\+\s*\\\) string, optional whitespace, followed by a
line continuation character
\(\s*\\\) optional whitespace, followed by a line
continuation character
Hence, the first subexpression handles empty assignments, the second
handles regular assignments, the third handles regular assignments with
line continuation, and the fourth empty assignments with line
continuation.
This expression was tested on following test text: (initial tab not
included)
FOO = spaces before
FOO = spaces before and after
FOO = tab before
FOO = tab and spaces before
FOO = tab after
FOO = tab and spaces after
FOO = spaces and tab after
FOO = \
FOO = bar \
FOO = bar space \
FOO = \
GENIMAGE_DEPENDENCIES = host-pkgconf libconfuse
FOO += spaces before
FOO ?= spaces before and after
FOO :=
FOO =
FOO =
FOO =
FOO =
$(MAKE1) CROSS_COMPILE=$(TARGET_CROSS) -C
AT91BOOTSTRAP3_DEFCONFIG = \
AXEL_DISABLE_I18N=--i18n=0
After this bulk change, following manual fixups were done:
- fix line continuation alignment in cegui06 and spice (the sed
expression leaves the number of whitespace between the value and line
continuation character intact, but the whitespace before that could have
changed, causing misalignment.
- qt5base was reverted, as this package uses extensive alignment which
actually makes the code more readable.
Finally, the end result was manually reviewed.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Cc: Yann E. Morin <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
