The individual binaries option of busybox allows for the applets
that would usually be symlinks to be built as individual applications
that link against a shared library.
This feature is needed for SELinux to allow the applications to run
under the correct SELinux context.
The patch being added allows the individual applications to be
installed and will be upstreamed to the busybox developers.
The initial work for this change was done by Thomas Petazzoni
<thomas.petazzoni@free-electrons.com>.
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Niranjan Reddy <niranjan.reddy@rockwellcollins.com>
Signed-off-by: Bryce Ferguson <bryce.ferguson@rockwellcollins.com>
[Thomas:
- add help text in Config.in option.
- rename BUSYBOX_CONFIGURE_INDIVIDUAL_BINARIES to
BUSYBOX_SET_INDIVIDUAL_BINARIES to be consistent with other
variables.
- call BUSYBOX_INSTALL_INDIVIDUAL_BINARIES in
BUSYBOX_INSTALL_TARGET_CMDS, not in BUSYBOX_INSTALL_INIT_SYSV.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Arnout:
- revert to the "optional file" approach in makedevs;
- reword Config.in comment text to match our usual pattern;
- abbreviate comment about how suid applets are found a little;
- all applets are optional (each one may have been unselected from the
busybox config).]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: remove /usr/share/udhcpc/default.script from BUSYBOX_PERMISSIONS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter b in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter b in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Removing clear and reset from the busybox config when the ncurses tools
are enabled is not really needed.
Since commit 802bff9c42, the busybox install will not overwrite
existing programs. Therefore, the tools will be installed correctly
regardless of the order of the build:
- if busybox is built first, the clear and reset apps are installed,
but they will be overwritten by ncurses;
- if ncurses is built first, it will install the clear and reset apps,
and busybox will no longer install them.
We prefer not to modify the busybox configuration when not strictly
necessary, because it is surprising for the user that his configuration
is not applied. Clearly, it's not ideal that busybox is configured with
redundant apps, but if the user wants to shrink it, it's possible to
provide a custom config.
This partially reverts commit 33c72344a8.
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Cc: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ncurses package installs a full version of clear and reset(tset)
tools. Preserve these by disabling the options in the busybox config
file. This removes the need for ncurses to depend on busybox for solely
ordering of target install.
This commit resolves the following python circular dependency with python.
busybox -> libselinux -> python3 -> ncurses -> busybox
Fixes:
http://autobuild.buildroot.net/results/db1/db1e6f3054092fc5576ccab8e04a3b9d74ca9a8c/
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Thomas: minor tweaks.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license strings as much as possible.
SPDX short identifier for GPLv2/GPLv2+ is GPL-2.0/GPL-2.0+.
This change is done by using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/\<GPLv2\>/GPL-2.0/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mdev does not set "/dev/snd" and "/dev/input" group and permission
propery, because with commit c3cf1e30a3022453311a7e9fe11d94c7a381640e
(May 2013!) the behavior of mdev has changed.
The device name is now taken directly from the uevent file and does no
longer match the old rule.
Fix the rules for "/dev/snd" and "/dev/input" according to the example
given in [1].
[1] http://lists.busybox.net/pipermail/busybox/2015-February/082297.html
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
And drop patches now upstream. Also enable internal glob() handling in ash,
as busybox now errors out if this isn't enabled when building for uClibc
because of bugs in the the glob(3) implementation in uClibc and musl since:
commit 3a4cdf45f928de0af09088bbbb96f60d9ac44e87
Author: Denys Vlasenko <vda.linux@googlemail.com>
Date: Wed Dec 21 04:13:23 2016 +0100
ash: error out if ASH_INTERNAL_GLOB is not selected on uClibc
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Inspired on the confusion in [1], we want to warn the user that building
without busybox may not lead to a working system.
[1] https://bugs.busybox.net/show_bug.cgi?id=9526
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream commit a8c696bf09d8151323f6e99348c4bc8989f829c8 makes ifup and
ifdown individually selectable, but forgets to update the dependency to
IFUPDOWN_UDHCPC_CMD_OPTIONS, so it is not selectable anymore.
Add a patch which fixes the dependency by checking for IFUP or IFDOWN,
instead of the obsolete IFUPDOWN.
Upstream status: Pending
http://lists.busybox.net/pipermail/busybox/2016-December/085034.html
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 44a563dbc0 bumps busybox to version
1.26.0, but does not update the minimal configuration file. There is at
least one issue using the old configuration with the newer busybox:
* IFUPDOWN is split into IFUP and IFDOWN in version 1.26.0
Update the minimal configuration file by loading the busybox.config file
and saving it back.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 44a563dbc0 bumps busybox to version
1.26.0, but does not update the configuration file. There is at least
one issue using the old configuration with the newer busybox:
* IFUPDOWN is split into IFUP and IFDOWN in version 1.26.0
Update the configuration file by loading the busybox.config file and
saving it back.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/dfe/dfec2c0626ab087325fd869bcbe0b9dc354d788c/
Busybox 1.26.0 gained separate config options for swapon / swapoff:
commit f417ffd88f194bbfd18605882ee242190c1bab34
Author: Denys Vlasenko <vda.linux@googlemail.com>
Date: Mon Nov 14 17:30:50 2016 +0100
Make swapon and swapoff individually selectable.
For example, without swapoff, code shrinks by 277 bytes.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
So adjust busybox.config and the logic to disable these applets for nommu
builds for the new names.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Busybox includes some information about the build environment in its
binary. For BR2_REPRODUCIBLE, remove that information.
Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Source /etc/default/telnet to make it possible to override the telnetd
arguments. For example a user may want to set an alternative port.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On some platforms the command 'top -n1 | head' goes very often into an
infinite loop of SIGABRT and double free()s.
Fix by applying a patch from upstream Busybox.
For a detailed explanation of the bug, see
http://lists.busybox.net/pipermail/busybox/2016-August/084555.html
Thanks to Yann for the help in finding this bug.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is a bit special. When Busybox is
enabled, it is a Busybox option. When Busybox is not enabled, it is a
stand-alone option, forcibly enabled.
So we can safely 'select' it without ensuring (via a 'depends on' or
another 'select') that Busybox is enabled.
However, the name of this option does not express the fact that it is
safe to select it without checking Busybox, which can lead to a bit of
time-consuming head-scratching.
To avoid future puzzlement from an unsuspecting observer, add a a big
fat comment that this option can be selected without any dependency on
Busybox.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas: slightly improve the wording of one of the comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The new change which enabled automatic module loading on boot does not handle
the cases when module alias includes spaces. It prevents modules to be loaded
since script fails:
% find /sys/ -name modalias | xargs sort -u
sort: /sys/devices/platform/Fixed: No such file or directory
First alias in question is "platform:Fixed MDIO bus".
Amend the script to support above like cases.
Fixes: 07f46c2b6d ("package/busybox: support automatic module loading with mdev")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some of our systems are using ttyUSB0 devices as a serial console.
Add them to mdev.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In addition, if a user is using glibc 2.22, the default CFLAG
D_FILE_OFFSET_BITS=64 will cause a compile error. This flag is now
removed from the CFLAGS in the make file to ensure that toolchains
compiled against glibc 2.22 will build the new version of the package
properly.
In addition, libselinux now uses fts(), which is not available on musl,
and not provided by our default uClibc configuration. Therefore,
libselinux now depends on glibc, as well as all its reverse
dependencies.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: add glibc dependency for fts().]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: don't use a helper.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Enable kernel drivers for networking and add a simple
busybox config with basic network tools.
Add kernel patch from Linux git to fix hush segfaults while
using signal handler.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Config can be used by other noMMU targets as qemu-system-m68k
with coldfire emulation.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* package/busybox/udhcpc.script: Use $search instead of $domain if
that is defined.
Note that for this to work, not only has CONFIG_FEATURE_UDHCP_RFC3397
be enabled in Busybox' configuration but also the option has to be
requested using the "-O search" command-line option (one can set it in
CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS, for instance).
[Peter: add comment with reference to rfc3359/option 119 for clarity]
Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The version bump doesn't inherently fix the security issues, however the
added CVE patches do, which fix:
CVE-2016-2147 - out of bounds write (heap) due to integer underflow in
udhcpc.
CVE-2016-2148 - heap-based buffer overflow in OPTION_6RD parsing.
Drop patches that are upstream as well.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
DES is terribly outdated and a security vulnerability.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A recently discussed on the mailing list:
http://lists.busybox.net/pipermail/buildroot/2016-February/154189.html
Our mdev configuration currently doesn't handle module loading. Fix that by:
- Telling mdev to run modprobe on hotplug events providing MODALIAS
- Adjust the init script to handle coldplug modalias events (E.G. modules
for which the devices were already present before mdev was added as the
hotplug handler). mdev -s should arguable handle this, but it doesn't.
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The default syslog parameters are to keep only 200-400 KiB of logs,
which is very few if there is a spammy daemon on the system, or a daemon
that fails and then spams errors that hides the original problem.
Make S01logging source a /etc/default/logging file where these
parameters can be overridden.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#8736
When IPv6 and largefile options were removed from Buildroot, the code to
force these options in busybox were still left in.
There's no strong reason to forcefully enable these options (only to disable
options if the system cannot support it like we do for nommu), so instead
enable the options in our default defconfig, allowing people to override
this if they use a custom config.
While we're at it, enable the prefer-ipv4 option so network applets like
ntpd doesn't fail when dual stacked hosts are resolved from a system without
IPv6 support enabled in the kernel.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Most embedded systems do not have a keyboard.
If a keyboard is attached afterwards (e.g. to an accessible USB host port)
this allows the user to reboot the system by pressing Ctrl-Alt-Del, which
might not be desired.
Signed-off-by: lothar felten <felten@vaxnet.de>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
0002-unzip.patch was added in 69516e0 to fix a segmentation fault in the
gunzip applet. However, it introduced a new issue that made the unzipping
of some files fail.
Add an upstream patch that fixes this new issue.
Fixes#8501.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Jason Rush <rush0033@hotmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Musl doesn't implemented wmtp, and its utmp support is not sufficient
to build the latest versions of Busybox, so let's disable wtmp and
utmp support in Busybox for musl toolchains.
We re-use an existing define BUSYBOX_INTERNAL_SHADOW_PASSWORDS that
was used to do some musl-related tweaks to the Busybox configuration
around shadow password functions, and extend it to also do the
utmp/wtmp tweaks. In the process, we rename the define to
BUSYBOX_MUSL_TWEAKS.
Note that BUSYBOX_KCONFIG_FIXUP_CMDS continues to call
BUSYBOX_INTERNAL_SHADOW_PASSWORDS because there is another definition
of this macro under other conditions.
Fixes:
http://autobuild.buildroot.org/results/b96/b96ffad13bca5e6fbf7ce79538aacbfe27b1eff3/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As pointed by Rich Fekler on IRC the basic hush shell is pretty much
useless since it doesn't support if conditionals, loops, functions, case
or even interactive mode.
So enable the full feature-set.
Size delta: +10184 bytes uncompressed for blackfin fdpic.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Disable CONFIG_FEATURE_SYNC_FANCY in the busybox.config because that
option causes build failures for any uClibc based toolchains since it
requires syncfs() support, which doens't exist in uClibc.
This new option has been introduced in 1.24.0, so despite of disabling
it, we are not losing anything that we had before.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
'echo -n' is not a POSIX construct (no flag support), we shoud use
'printf', especially in init script.
This patch was generated by the following command line:
git grep -l 'echo -n' -- `git ls-files | grep -v 'patch'` | xargs sed -i 's/echo -n/printf/'
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Several inittab steps are redirected to /dev/null. This means any error or
warning printed by these crucial commands would be hidden from the user.
There is no evident reason to hide this output, so stop doing that.
Suggested by Thomas Petazzoni:
http://lists.busybox.net/pipermail/buildroot/2015-September/139146.html
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libselinux causes some build problems due to the toolchain on ARC,
which haven't been solved so far. As a temporary solution for Buildroot
2015.08, this commit makes libselinux (and its reverse dependencies)
unavailable on ARC. Of course, once the toolchain problem is
addressed, this commit can be reverted to re-enable libselinux on ARC.
Fixes:
http://autobuild.buildroot.org/results/220/2207f6aad44a6988bf07b02b583b6418ad930dc8/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Instead of hardcoding the flags needed for libtirpc, use pkg-config.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
