In preparation for more graph-depends improvements, use a
TARGET_EXCEPTIONS list to list all the targets that should be ignored
while building the dependency graph.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When doing a full graph of the dependencies, graph-depends starts by
doing a "make show-targets", which lists all the packages registered
in the $(TARGETS) variable. This variable contains all packages that
are enabled according to the .config file. Then, for each of those
packages, we used to create a "all" -> "package" dependency, even if
in fact most of some packages are already dependencies of other
packages. This creates a needlessly complex dependency graph.
This patch modifies graph-depends so that it filters out the unneeded
"all" -> "package" dependencies when "package" is already the
dependency of another package.
For example, if you have a configuration with libpng (which selects
zlib), "make show-targets" displays "libpng zlib", so graph-depends
used to create the following dependencies: (all -> libpng, all ->
zlib, libpng -> zlib). However, the (all -> zlib) dependency is not
really needed, as zlib is already the dependency of libpng. Those
dependencies are now filtered out.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add an option in the menuconfig to specify a root password.
If set to empty, no root password is created; otherwise, the password is
encrypted using MD5 (MD5 is not the default for crypt(3), DES-56 is, but
MD5 is widely available, not-so-strong, but not-so-weak either).
Add a check for 'mkpasswd' as a new dependency.
[Peter: fix typo/capitilization and simplify logic]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A very common mistake done by our users is that they use
output/target/ directory as their root filesystem. Even though this is
loudly documented in our Buildroot manual, people don't read
documentation, so it is not sufficient.
This patch adds a text file named
output/target/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM which explains why
output/target isn't appropriate to use as the root filesystem. The
process is:
* At the beginning of the build, right after the skeleton has been
copied, support/misc/target-dir-warning.txt is copied to
output/target/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM
* In the filesystem images creation code, this file is removed before
launching fakeroot, and restored right after that, so that this
file is not present in the generated root filesystem images.
Note that the file has not been added to the default skeleton for two
reasons:
* It would have annoying to have in our source tree a file named in
capital letters inside system/skeleton/
* The proposed way works even if the user uses a custom skeleton.
[Peter: fixed typo]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Juha Lumme <juha.lumme@gmail.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We need more recent versions of config.guess and config.sub in order
to support the aarch64 architecture. Otherwise, all autoconf packages
fail to build with failures like:
http://autobuild.buildroot.org/results/abcdbe1aaf1c203c82dc3e4ec8c002b9b9e550e0/build-end.log
We take this opportunity to turn the config.* patches into proper Git
patches, and note which Git commit of the config.git repository we
used as the original source.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
At the top of the output html page there is a dangling "results" link.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
graph-depends calls make to get the list of packages, and the
dependencies of each package.
When called out-of-tree, the Makefile is a wrapper that calls
the real Makefile, so make will spit out a line like:
make -C /path/to/buildroot O=/path/to/build-dir show-targets
which graph-depends wrongly believes is part of the target list.
Be silent when calling make, as we really only want the target
and dependency lists.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since on some packages we are adding <pkg>_LICENSE but not necessarily
<pkg>_LICENSE_FILES, let's add a separate statistic to track these
informations. This will allow us to improve both the number of
packages covered by <pkg>_LICENSE and <pkg>_LICENSE_FILES.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For alignement reasons, we sometimes add spaces between <pkg>_LICENSE
and the equal sign. Take this into account in pkg-stats.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that most packages have been converted over to package
infrastructures, keep only one column to show the package
infrastructures.
A new column, showing of the package has license information, has been
added. This will help in increasing the number of packages having
license metadata.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the introduction of a specific macro for host targets, it was decided
to also make the names of the macros more intuitive: generic-package,
autotools-package and cmake-package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Create host-generic-package, host-autotools-package and
host-cmake-package macros. Such a macro is more intuitive to use than
the $(call ...,host) construct. Also it speeds things up by having
one less $(call ...) evaluation.
Also includes documentation update, but not for buildroot.html.
This brings the time for 'make -qp' (which is used by bash-completion)
down from 1.85s to 1.35s on my laptop.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This allows to automatically collect material that may be needed to comply with
the license of packages that Buildroot prepares for the target device.
The core of the implementation is made by the following parts:
- in package/pkg-utils.mk some helper functions are defined for common actions
such as generating a warning, producing info about a package etc;
- in package/pkg-gentargets.mk, within the GENTARGETS framework, a new
<PKG>-legal-info target produces all the info for a given package;
- Makefile implements the top-level targets:
- legal-info-prepare creates the output directory and produces legal info
about Buildroot itself and the toolchain, which mostly means just warning
the user that this is not implemented;
- legal-info, the only target that is supposed to be used directly, depends
on all of the above and finishes things by producing the README files from
the various pieces.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We should instead simply unset it at runtime, like we do for
PKG_CONFIG_PATH.
This reverts commit 9910eba33a.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Having DESTDIR set in the environment before running Buildroot creates
some funky problems in the build process. Prevent users from running
into this kind of troubles.
Cc: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The patch pattern was expanded before being into the patch directory so the
expansion can add incorrect files.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Recursivity is needed with some tarballs containing debian patches:
.
debian
changelog
control
patches
02-COPYRIGHT.patch
[...]
Since we can find some files which are not patches in those directories, only
consider .patch* and .diff* files as valid patches.
Due to recursivity, strip-components option is no more necessary so it has
been removed.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If a series file is present use it to determine the proper order to apply
patches instead of using ls sorting order.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
add a series file with a wrong patch order into an archive containing several
patches whose correct order is the alphabetical one
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The way archives were managed was incorrect because the uncompressed archives
were sent directly to the patch command. It means that alphabetical patch
order was not respected.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
with an armadeus_apf9328_defconfig build
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When a directory is found in patchdir, it is skipped.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
with an armadeus_apf9328_defconfig build
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
targetdir is not the output/target directory as it can suggest.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
with an armadeus_apf9328_defconfig build
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: .rej files might be in subdirs, so just do find .. | xargs rm]
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
with an armadeus_apf9328_defconfig build
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some toolchains, like the one built with buildroot itself, use hardlinks (for
example to link between the c++ and g++ binary). Unpacking such a toolchain
with the --strip-components options does not work correctly if the system tar
is too old (<1.17). Even recent releases of RedHat/CentOS still ship with
tar 1.15.
This patch checks for a suitable tar version (tar 1.17+) on the host system,
and adds host-tar to the host dependencies if none can be found.
host-tar is download and extracted as cpio.gz instead of tar.gz, to prevent
chicken-egg problem.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
v4 Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Sometimes, buildroot needs a certain host tool to do its job, e.g. tar. In
many cases, we expect this tool to be present on the host system, but this is
not always the case. Or maybe, the version on the host system is not
suitable, and we need a more recent one.
In some of these cases, instead of bailing out, buildroot could build the
package first (but only if the existing system package is not suitable).
To aid in detecting if a host package is suitable or not, this patch adds a
function suitable-host-package. When called with parameter foo, it will
execute check-host-foo.sh. This script should return either the path to the
suitable host package, or the empty string if no suitable package can be found.
The rules to determine whether something is suitable or not is left to
check-host-foo.sh and depends on foo.
An example usage of suitable-host-package is:
DEPENDENCIES_HOST_PREREQ += $(if $(call suitable-host-package,foo),,host-foo)
To avoid cluttering the existing dependencies.mk file, it includes any
check-host-foo.mk file. These files can be used to hold appropriate
dependency-related actions for foo.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
v1 Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As suggested by Arnout Vandecappelle, move toolchain/dependencies to
support/dependencies, as it really is not toolchain-specific anymore.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The "Patch count" cell needs rowspan=2, otherwise the host/target cells are
misaligned.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The variable convert_to_autotools is not used in the script. The correct
variables are convert_to_target_autotools and convert_to_host_autotools.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The package count, cnt, should start with an initial value of 0. It
is incremented as each package *.mk file is checked. Starting with a
value of 1 makes the first ID = 2 and results in the TOTAL being off
by 1.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the grep tests used to determine the package type.
The package name and directory are now worked out magically due to:
package: add helper functions to get package name and directory magically
Because of this the extra arguments were removed by patches:
package: remove useless arguments from GENTARGETS
package: remove useless arguments from AUTOTARGETS
package: remove useless arguments from CMAKETARGETS
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The CONFIG_UPDATE macro is no longer defined in
package/gnuconfig/gnuconfig.mk, but instead in
package/Makefile.autotools.in. It it also changed a little bit to take
the directory of the package sources as argument, and the AUTOTARGETS
infrastructure is updated to use this macro.
[Peter: drop echo in CONFIG_UPDATE]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The name "patch-kernel.sh" is a bit stupid, since this script is used
to patch everything in Buildroot, not only kernel trees.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
