Commit Graph

50 Commits

Author SHA1 Message Date
Bernd Kuhls
88adc94297 package/kismet: bump version to 2016-07-R1
Changed _SITE from git clone to tarball provided by upstream.
Rebased patches 0003 & 0004.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-07-25 21:47:26 +02:00
Rahul Bedarkar
af31c309e7 boot, linux, package: use SPDX short identifier for GPLv2/GPLv2+
We want to use SPDX identifier for license strings as much as possible.
SPDX short identifier for GPLv2/GPLv2+ is GPL-2.0/GPL-2.0+.

This change is done by using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/\<GPLv2\>/GPL-2.0/g'

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-04-01 15:16:38 +02:00
Thomas Petazzoni
0c5946acc2 ncurses: remove BR2_PACKAGE_NCURSES_TARGET_{FORM, MENU, PANEL} options
The ncurses sub-options BR2_PACKAGE_NCURSES_TARGET_{FORM,MENU,PANEL}
are currently very badly broken: they only control whether the
libform, libmenu and libpanel libraries are installed in
$(TARGET_DIR), but do absolutely nothing about their installation in
$(STAGING_DIR).

This means that when one of those options is disabled, the
corresponding library is indeed not installed in the target, but is
available in staging. It can therefore be detected by the configure
script of another package and used... even though the library will not
be in the target, causing a runtime failure.

Internally, ncurses.mk uses the "make install" logic of ncurses for
the staging installation, but uses a completely hand-written logic for
the target installation, which is the reason for this
desynchronization between what's installed in staging and target.

When BR2_PACKAGE_NCURSES_WCHAR=y, this also causes some build
failures. Indeed, when BR2_PACKAGE_NCURSES_WCHAR=y, Buildroot creates
some symbolic links lib<foo>.so -> lib<foo>w.so in staging and target,
but only for the lib<foo> that have been enabled by
BR2_PACKAGE_NCURSES_TARGET_{FORM,MENU,PANEL}. Due to this, a package
that for example needed the libmenu library but forgot to select
BR2_PACKAGE_NCURSES_TARGET_MENU was:

 - Building fine with BR2_PACKAGE_NCURSES_WCHAR disabled (because
   libmenu.so exists in staging), but would fail to run at runtime
   because libmenu.so is not in the target.

 - Fail to build with BR2_PACKAGE_NCURSES_WCHAR=y because only
   libmenuw.so exists, and not the libmenu.so symbolic link.

Since those libraries are small (43K for libform, 21K for libmenu and
8.2K for libpanel), this commit takes the very simple approach of
removing those options, and installing the libraries
unconditionally. It therefore uses the "make install" logic for both
the staging *and* target installation.

In detail, this commit:

 - Removes the NCURSES_PROGS variable, not needed since
   --without-progs already allows to disable the build and
   installation of programs.

 - Removes the NCURSES_LIBS-y variable, and replaces it with a single
   unconditional assignement to NCURSES_LIBS, only used to create the
   lib<foo>w.so -> lib<foo>.so symbolic links when wchar support is
   enabled.

 - Removes NCURSES_INSTALL_TARGET_CMDS and the functions it was
   calling: NCURSES_INSTALL_TARGET_LIBS and
   NCURSES_INSTALL_TARGET_PROGS.

 - Adds a NCURSES_TARGET_SYMLINK_RESET hook to create the reset ->
   tset symbolic link, as was done before.

 - Adds a NCURSES_TARGET_CLEANUP_TERMINFO to cleanup the terminfo
   files in the target, so that we stay in the same situation in terms
   of installed terminfo files.

 - Removes the BR2_PACKAGE_NCURSES_TARGET_{FORM,MENU,PANEL} options
   from the Config.in files: both their definition and usage.

 - Simplifies all the symlink dance for lib<foo> -> lib<foo>w, because
   as Yann E. Morin suggested, this dance is only needed in staging, not
   in the target. Once binaries have been built, they refer to the
   SONAME of the library, which is the lib<foo>w variant (for shared
   linking). For static linking and .pc files, it's obvious that we
   don't care about them on the target. Therefore the
   NCURSES_LINK_LIBS_STATIC, NCURSES_LINK_LIBS_SHARED and
   NCURSES_LINK_PC functions no longer take any argument: they always
   apply to STAGING_DIR only. NCURSES_LINK_TARGET_LIBS is removed.

It is worth mentioning that adding Config.in.legacy support is *NOT*
necessary. Indeed:

 - If they were disabled before this patch, having them in
   Config.in.legacy would not trigger the legacy warning.

 - If they were enabled before this patch, then the behavior is
   unchanged: all libraries are now unconditionally installed. So
   there is no point in warning the user.

We double-checked the installed size of a filesystem containing just
ncurses before and after this patch, and the only folder that has its
size changed is /usr/lib, growing from 852 KB to 932 KB in the wchar
enabled case. That's a 80 KB system size increase.

This commit fixes the sngrep build failure and potentially numerous
runtime issues with ncurses.

Fixes:

  http://autobuild.buildroot.net/results/7b5db21a6c568e6c6c8fe2b5d5a2f5ca24df510c/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-02-26 17:00:12 +01:00
Romain Naour
bd89e0b1b6 package/kismet: remove kernel header
dumpfile_tuntap.h mixes userspace and kernel headers.

Fixes:
http://autobuild.buildroot.net/results/8a3/8a3e2ba9e0a698d25e1fc8684784e8ba9a5d2e80

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-08-20 14:53:53 +02:00
Romain Naour
6ad462aa0f package/kismet: add hash file
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-08-20 14:53:47 +02:00
Bernd Kuhls
46143f1683 package/kismet: add optional support for libcap
When libcap was compiled before, kismet will use it as optional
dependency:

$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/bin/kismet_server | grep NEEDED
 0x0000000000000001 (NEEDED)             Shared library: [libcap.so.2]
[...]

The build system offers no option to en-/disable libcap support:
https://www.kismetwireless.net/gitweb/?p=kismet.git;a=blob;f=configure.ac;h=e874b10f3c1d56e2deb5e8adf4b8da4066fdde56;hb=HEAD#l635

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-02-21 18:21:21 +01:00
Thomas Petazzoni
2af75321d2 kismet: mark as not available for static builds
This reverts commit a3365ebf72, and
marks kismet as not available for static builds.

Commit a3365ebf72 is indeed
insufficient, since kismet uses <dlfcn.h> in two places, both in
kismet_server and kismet_client. And it's fairly unlikely that kismet
will be used in pure static environments, so let's not support this
use case.

Fixes:

  http://autobuild.buildroot.net/results/c24/c24e3e325df9748e9959fe79f7026d24f118dffd/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-07-12 16:14:26 +02:00
Jerzy Grzegorek
bd8c733fb4 packages: indentation cleanup
This commit doesn't touch infra packages.

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-03-31 13:57:41 +02:00
Vicente Olivert Riera
a3365ebf72 kismet: Fix static build
Use pcap-config to list optional libpcap dependencies needed for static
link. Otherwise we will see errors like this one:

/br/output/host/usr/mipsel-buildroot-linux-uclibc/sysroot/usr/lib/libpcap.a(pcap-canusb-linux.o):
In function `canusb_close':
pcap-canusb-linux.c:(.text+0xec): undefined reference to `libusb_close'

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[yann.morin.1998@free.fr: remove the ncurses bits (done differently in
 another patch), fix BR2_PREFER_STATIC_LIB -> BR2_STATIC_LIBS]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-12-27 11:29:13 +01:00
Yann E. MORIN
5aea55e0ee package/kismet: do not use host headers
kismet's ./configure hard-codes host paths in its include search paths.
Fix that by removing the offending paths.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-12-27 11:29:09 +01:00
Yann E. MORIN
8b966c934d package/kismet: fix ncurses static build
Says Vicente:
    [T]he order is very important when doing static builds.
    Otherwise we will see errors like this one:

    [...]/sysroot/usr/lib/libpanel.a(p_delete.o):
    In function `del_panel':
    p_delete.c:(.text+0x68): undefined reference to `_nc_panelhook'

Fix the order configure adds libraries: new libraries should be added
at the *front* of the list, not at the end.

Reported-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-12-27 11:29:04 +01:00
Vicente Olivert Riera
fa3d2a11e9 kismet: bump version to Kismet-2014-02-R1
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-12-11 19:53:52 +01:00
Vicente Olivert Riera
297c866159 kismet: rename patches to follow the new name convention
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-12-11 19:53:43 +01:00
Thomas De Schampheleire
aaffd209fa packages: rename FOO_CONF_OPT into FOO_CONF_OPTS
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.

Sed command used:
   find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-10-04 18:54:16 +02:00
Thomas De Schampheleire
35eaed8d07 Config.in files: use if/endif instead of 'depends on' for main symbol
In the Config.in file of package foo, it often happens that there are other
symbols besides BR2_PACKAGE_FOO. Typically, these symbols only make sense
when foo itself is enabled. There are two ways to express this: with
    depends on BR2_PACKAGE_FOO
in each extra symbol, or with
    if BR2_PACKAGE_FOO
        ...
    endif
around the entire set of extra symbols.

The if/endif approach avoids the repetition of 'depends on' statements on
multiple symbols, so this is clearly preferred. But even when there is only
one extra symbol, if/endif is a more logical choice:
- it is future-proof for when extra symbols are added
- it allows to have just one strategy instead of two (less confusion)

This patch modifies the Config.in files accordingly.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2013-12-25 12:21:39 +01:00
Thomas De Schampheleire
eb7bd9ef61 packages: remove uninstall commands
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2013-12-06 09:40:40 +01:00
Thomas De Schampheleire
be084204eb Config.in files: add missing dependencies to toolchain option comments
When a package A depends on config option B and toolchain option C, then
the comment that is given when C is not fulfilled should also depend on B.
For example:

config BR2_PACKAGE_A
	depends on BR2_B
	depends on BR2_LARGEFILE
	depends on BR2_WCHAR

comment "A needs a toolchain w/ largefile, wchar"
	depends on !BR2_LARGEFILE || !BR2_WCHAR

This comment should actually be:

comment "A needs a toolchain w/ largefile, wchar"
	depends on BR2_B
	depends on !BR2_LARGEFILE || !BR2_WCHAR

or if possible (typically when B is a package config option declared in that
same Config.in file):

if BR2_B

comment "A needs a toolchain w/ largefile, wchar"
	depends on !BR2_LARGEFILE || !BR2_WCHAR

[other config options depending on B]

endif

Otherwise, the comment would be visible even though the other dependencies
are not met.

This patch adds such missing dependencies, and changes existing such
dependencies from
  depends on BR2_BASE_DEP && !BR2_TOOLCHAIN_USES_GLIBC
to
  depends on BR2_BASE_DEP
  depends on !BR2_TOOLCHAIN_USES_GLIBC
so that (positive) base dependencies are separate from the (negative)
toolchain dependencies. This strategy makes it easier to write such comments
(because one can simply copy the base dependency from the actual package
config option), but also avoids complex and long boolean expressions.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
 (untested)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2013-11-10 23:59:57 +01:00
Thomas De Schampheleire
66bb10b7b0 Config.in files: unify comments of toolchain option dependencies
This patch lines up the comments in Config.in files that clarify which
toolchain options the package depends on.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2013-10-14 22:45:57 +02:00
Gustavo Zacarias
7d6a640452 kismet: needs mmu
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2013-10-09 22:35:02 +02:00
Jerzy Grzegorek
62146ea3ad change package tarball compression to xz whenever possible
[Peter: leave change xz tarball format to not end up with circular deps]
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-09-08 22:44:23 +02:00
Alexandre Belloni
8dfd59d114 Normalize separator size to 80
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-06-06 22:30:24 +02:00
Gustavo Zacarias
6d916b73ce kismet: bump to version 2013-03-R1b
Fixes issues in the configure script.
Also make libnl a mandatory dependency to fix:
http://autobuild.buildroot.net/results/c8bf63f4ee013bd3467934c87c61478a1f95e3eb/
Kismet isn't too useful without it anyway.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-04-12 11:56:04 +02:00
Peter Korsgaard
e968ebee7e kismet: fix license files info
Fixes http://autobuild.buildroot.net/results/9a0ebe157438a07e145026e61c3031e5bf2283b9

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-04-11 23:57:07 +02:00
Gustavo Zacarias
36319e23e8 kismet: bump to version 2013-03-R1a
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-04-11 09:22:15 +02:00
Gustavo Zacarias
3edc40ec84 kismet: add license information
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-01-29 23:29:21 +01:00
Arnout Vandecappelle (Essensium/Mind)
e1502ebc0c all packages: rename XXXTARGETS to xxx-package
Also remove the redundant $(call ...).

This is a purely mechanical change, performed with
find package linux toolchain boot -name \*.mk | \
  xargs sed -i -e 's/$(eval $(call GENTARGETS))/$(eval $(generic-package))/' \
               -e 's/$(eval $(call AUTOTARGETS))/$(eval $(autotools-package))/' \
               -e 's/$(eval $(call CMAKETARGETS))/$(eval $(cmake-package))/'

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-07-17 20:23:05 +02:00
Daniel Mack
f472b915c0 kismet: fix build with new libnl-3
The CPPFLAGS have to be augmented, so configure finds the correct include
dir, and the patch needs to be tweaked to make the binary link to
libnl-3 instead of libnl-gen.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2011-12-26 08:42:38 +01:00
Thomas Petazzoni
300f9c9c9d package: remove useless arguments from AUTOTARGETS
Thanks to the pkgparentdir and pkgname functions, we can rewrite the
AUTOTARGETS macro in a way that avoids the need for each package to
repeat its name and the directory in which it is present.

[Peter: pkgdir->pkgparentdir]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2011-09-29 23:12:27 +02:00
Yegor Yefremov
fec53c73cf kismet: add support for libnl-3.0
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2011-05-15 00:08:24 +02:00
Gustavo Zacarias
2c200d5b36 kismet: bump to version 2011-03-R2
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2011-04-27 20:54:54 +02:00
Peter Korsgaard
e7b6b32c5d package: get rid of ".. has no inherent support for AVR32" comments
These are probaly out of date by now, and lack of special handling for
avr32 doesn't mean that a package won't work on avr32, so remove them.

Done by sed -i '/comment.*no inherent support for AVR32/{N;N;p}'

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-10-04 11:41:20 +02:00
Thomas Petazzoni
5c421dde68 kismet: use correct step override method 2010-09-12 19:26:51 +02:00
Gustavo Zacarias
ee314c97f9 kismet: bump to 2010-07-R1
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-09-07 23:06:29 +02:00
Thomas Petazzoni
2ab8ec9e26 kismet: fix build when none of client, server or drone are selected
Random package configuration can trigger the selection of kismet, but
neither of client, server or drone suboptions. In this case, the
KISMET_TARGET_BINARIES variable is empty, leading to failure during
the installation stage.

At the same time, we remove the useless stripping of the installed
binaries, since this is done globally by the Buildroot infrastructure.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-08-30 11:08:32 +02:00
Gustavo Zacarias
db9dcbee6e Bump kismet package to 2010-01-R1
Closes .

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2010-01-20 11:10:08 +01:00
Gustavo Zacarias
57f3b11d11 kismet: bump version and convert to Makefile.autotools.in format
Closes 

* Bump kismet from 2007-10-R1 to 2009-06-R1 (newcore: nicer, more features)
* Migrate to Makefile.autotools.in
* Introduce new options to just install the server, client, drone or
  combination

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-09-09 16:40:19 +02:00
Will Newton
422ce6536b package: Remove unnecessary dependencies on uclibc.
A C library will have been built by the toolchain makefiles, so there is no
need for packages to explicitly depend on uclibc.

Signed-off-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2009-09-03 20:22:38 +02:00
Ulf Samuelsson
8e2390fdaf Add help for packages without AVR32 support 2009-01-26 00:34:02 +00:00
Ulf Samuelsson
a57170cb02 add kismet-unpacked target, fix lack of include for memset etc. 2009-01-21 00:17:03 +00:00
Peter Korsgaard
4a7bfd2775 package/: convert to DOWNLOAD helper 2009-01-16 11:42:52 +00:00
Ulf Samuelsson
afa1babac5 Kismet needs dbus to build 2009-01-14 23:51:32 +00:00
Peter Korsgaard
ac1d92c425 package/: get rid of unneeded $(strip ..) 2008-12-08 08:15:27 +00:00
Peter Korsgaard
785d6cc6d0 package: remove redundant pkg-config variables
Also remove some redundant or predefined configure/make args in these
packages.

Patch by Markus Heidelberg.
2008-10-26 19:57:55 +00:00
Peter Korsgaard
335f52b798 kismet: fix long help text lines
And add homepage while we're at it.
2008-08-27 20:18:51 +00:00
Peter Korsgaard
02a623ddf9 buildroot: remove trailing spaces
for i in `find -name 'Config*' -o -name 'Makefile*' -o -name '*.mk'`;
do
	sed -i 's/ \+$//' $i;
done
2008-08-04 19:07:05 +00:00
Peter Korsgaard
4683420c4c Kconfig: remove 'default n'
'default n' is the default, so there's no need to say it explicitly.
2008-07-17 20:01:44 +00:00
Thomas Lundquist
94c236419b This will hopefully address the comment on bug 2007-11-14 09:41:21 +00:00
Thomas Lundquist
9b4ac6ab8e Had an issue noted in bug , attached patch. 2007-10-31 12:46:52 +00:00
Ulf Samuelsson
d2ac6e6d6f Fix kismet makefile fragment syntax error 2007-10-30 21:57:43 +00:00
Thomas Lundquist
88f918e2e4 Adding Kismet, closing 2007-10-30 09:16:51 +00:00