This is a Xilinx Zynq (xc7z045) development board, based on Xilinx Zynq
(xc7z045).
This support is based on Avnet Zedboard defconfig/readme.
[Thomas:
- minor fixes in the readme.txt
- rename defconfig from zc706_defconfig to xilinx_zc706_defconfig.]
Signed-off-by: Jordi Montagne <jordi.montagne66@gmail.com>
Tested-by: Jean Burgat <jeanburgat33@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
xdriver_xf86-video-siliconmotion no longer use the git repository.
commit: b343bc690e
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
xdriver_xf86-video-cirrus no longer use the git repository.
commit: e45edc34fa
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
xdriver_xf86-video-neomagic no longer use the git repository.
commit: 560660d06b
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
lttng-tools-2.0-pre15-no-sync-file-range-in-uclibc.patch is gone
with the commit fb5d605638.
lttng-tools-no-sync-file-range-in-uclibc.patch is gone
with the commit ed692e2dbb.
There is no need to autoreconf lttng-tools.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A configure script is bundled with the archive
of the current version.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
autoreconf is not needed anymore with the current
version (4.0.2).
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
0001-fix-configure-debug.patch was removed in
commit 68e846d3b2
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
neard have been bumped several time since autoreconf
was added in neard.mk.
autoreconf seems not needed anymore.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A configure script is already bundled in the archive.
There is no comment why autoreconf was added.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
autoreconf is not needed anymore since non-lfs enabler patch
has been removed.
commit: 415765b5a8
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Autoreconf is not needed anymore since ulogd 2.0.4
where logd-01-pthread-conditional.patch was removed.
commit: 010745a955
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When debugging packages that use the pkg-kconfig infrastructure, it
is sometime interesting to see the exact command line that is being
executed when running oldconfig.
But currently, those command lines are prefixed with '@' which makes
them silent, always.
Instead, use $(Q) so they are silent by default, and verbose with V=1.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When a package has both a target and a host variants, and there is an
override-srcdir set for the target variant, the host variant should
inherit the target's override-srcdir, unless explicitly set, like we do
for all other target-variant properties.
However, do not override it if expressly set to empty (i.e. when the
user wants to override only the target variant).
Also, as we do for the other variables, the target variant never
inherits from the host variant.
Reported-by: Mike <mikez@OpenPlayer.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Tested-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Let a user modify environment variables used in ejabberdctl by loading
a default configuration file.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The startup script for the audit package did not meet the buildroot
standards when the package was initially merged. Adding a compliant
startup script for starting the audit daemon along with rotating the
logs and other features.
[Thomas:
- Replace "Failed" by "FAIL" to be consistent with the rest of the
init script and other packages
- Use $(INSTALL) -D with a complete destination path to avoid having
to create /etc/init.d before installing the init script.]
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's rather unclear that uboot.sb, uboot.sd and uboot.nand are
Freescale i.MX28 specific, so let's make that clear in the prompt of
each option, like we do for the Marvell-specific uboot.kwb.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the patchset "kconfig: turnaround into single .config"
[http://lists.denx.de/pipermail/u-boot/2015-February/205490.html]
U-Boot switched to a single .config file for board configuration. This
allows us to use the kconfig-package infrastructure.
For providing backward compatibility with older U-Boot version a user
choice between the new Kconfig and the legacy build system is
introduced.
[Thomas:
- make use of the legacy build system the default, to not break
existing configurations.
- add some comments in the code checking all the configuration
options, in order to hopefully make it a bit clearer.]
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we're only fixing libtool's .la files for autotools packages,
and even more so, only for those that do not define their own
_INSTALL_STAGING_CMDS.
However, .la files might also be installed by non-autotools packages,
like the NVidia GPU binary blob (libGL.la).
So, move that code into the global build rule, so all packages get their
.la files fixed, whether they be autotools packages or not, and whether
they define their own _INSTALL_STAGING_CMDS or not.
Also print a message.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- fix indentation of select BR2_PACKAGE_ZLIB in Config.in
- rewrap Config.in help text, lines were too long
- remove depends on BR2_PACKAGE_QT || BR2_PACKAGE_QT5, since
quazip/Config.in is already only included if one of Qt4 or Qt5 is
enabled.
- remove QUAZIP_SOURCE definition, since its value was the default
- add the missing zlib dependency in the .mk file
- add spaces around '=' signs when setting QUAZIP_QMAKE
- pass $(TARGET_MAKE_ENV) at install time]
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch changes the U-Boot's default environment to
boot Zedboard out-of-the-box from SD card.
The sdboot procedure tries to load a file system.bit into
the Zynq's PL (only if it exists). It is also possible to
alter the booting by an uEnv.txt file located on your SD card.
The uEnv.txt is a plain text file with <key>=<value> pairs
one per line.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The U-Boot v2015.07 builds working SPL without a manual
intervention. The BOOT.BIN is generated from the standard
SPL so no BR2_TARGET_UBOOT_SPL_NAME redefinition is needed.
The SPL requires the u-boot-dtb.img file to boot properly.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit integrates generation of a bootable image
for Xilinx Zynq. The generation is independent on Xilinx
flow and utilizes the host-zynq-boot-bin package. The only
required step is to generate a proper U-Boot SPL (instead
of the FSBL).
The SPL generation might work when providing the working
ps7_init.c file to U-Boot. However, from U-Boot 2015.07
a set of generic ps7_init.c files is included and used to
build the U-Boot SPL for various boards. The ps7_init.c file
has been released under GNU/GPL license for this purpose.
For details, see
http://lists.denx.de/pipermail/u-boot/2015-April/210664.html
The SPL searchs for u-boot-dtb.img when booting so we
enforce using of the BR2_TARGET_UBOOT_FORMAT_DTB_IMG format.
[Thomas: remove select of BR2_PACKAGE_HOST_ZYNQ_BOOT_BIN, since this
option no longer exists.]
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The package provides a Python script that can create the file BOOT.BIN
to boot Xilinx Zynq based boards.
The script zynq-boot-bin.py is contained in the Xilinx repository of
U-Boot (it is not in upstream).
[Thomas:
- remove appearance of the package in menuconfig, U-Boot will depend
on it directly, so there's no need for it to appear in menuconfig
- use $(INSTALL) instead of cp for the installation
- remove @ before the extract and install commands.]
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Recently uClibc got support of "savedefconfig" target that allows
generation of compact configuration description which only lists
differences from default options.
That's uClibc commit -
http://git.uclibc.org/uClibc/commit/?id=e286a674419d31cb0757dd2f8307d8b4756cf1f9
This change represents post-processing of "uClibc-snapshot.defconfig"
and "uClibc-ng.config" with "make savedefconfig" made on current
uClibc/master and uClibc-ng/1.0 branches accordingly.
Unfortunately the most recent stable uClibc version 0.9.33.2 doesn't
have "savedefconfig" target so I'm leaving uClibc-0.9.33.config as it
is.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch bumps mono to version 4.0.2.5
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The package now offers the possibility to install Python and/or C#
bindings if the Python and Mono packages are detected.
v2: Patch generated with 'git format-patch -M' and fix indentation in libiio.mk
v3: Updated libiio.hash file
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Spotted during package review/testing, but forgot to squash it in the
original patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now when ARC toolchain also supports NPTL both Qt's Script and WebKit
modules could be successfully built and then executed on ARC.
[Thomas: fix alphabetic ordering.]
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adding the cpio archive utility for the target and host. Patches have
been pulled from ArchLinux and Gentoo to fix CVE issues and compile
issues.
[Thomas: remove host variant of the package, as discussed during the
review of earlier version.]
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: in the sed expression, use % as a delimiter instead of /,
since the line contains several / that all had to be escaped.]
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: remove S30dbus changes.]
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- remove the patch from Matthew Weber that did a lot of changes that
were not needed: the CFLAGS would not get overridden by Buildroot
ones if the Buildroot TARGET_CONFIGURE_OPTS is passed on the left
hand-side of make, and the SULOGINLIBS hack needs to be replaced
by a proper handling of the libcrypt detection.
- added a patch that changes the libcrypt detection logic to accept
a SYSROOT variable. Instead of search for /usr/lib/libcrypt.a, it
search for $(SYSROOT)/usr/lib/libcrypt.a. This avoids the need for
overriding SULOGINLIBS.
- don't modify TARGET_CONFIGURE_OPTS in sysvinit.mk, this is
completely forbidden and broken.
- don't pass ROOT= since we don't use 'make install' anyway.]
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
