We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for Boost Software License 1.0 is BSL-1.0.
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove getchar() patch which has been applied upstream.
Add recommanded post-release patch from upstream to fix 64-bit atomic
operations on 32-bit x86 with gcc versions older than 4.7.
Add a patch from upstream to fix FPE issue with uClibc-based toolchains.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove getchar() patch which has been applied upstream.
Add recommanded post-release patch from upstream to fix 64-bit atomic
operations on 32-bit x86 with gcc versions older than 4.7.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The boost-context module contains ARM assembly code, which uses ARM
instructions. Therefore, on Thumb-2 only platforms (such as Cortex-M),
the following build error occurs:
libs/context/src/asm/make_arm_aapcs_elf_gas.S: Assembler messages:
libs/context/src/asm/make_arm_aapcs_elf_gas.S:33: Error: unshifted register required -- `bic a1,a1,#15'
libs/context/src/asm/make_arm_aapcs_elf_gas.S:42: Error: immediate value out of range
To avoid this error, we make the boost-context module depend on
BR2_ARM_CPU_HAS_ARM.
Fixes:
http://autobuild.buildroot.net/results/8f6770b59a343b9f710e9363b43227ee9f026660
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: use BR2_ARM_CPU_HAS_ARM instead of a dependency on
!BR2_ARM_CPU_ARMV7M.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Until now this library wasn't handled by the Buildroot packaging,
so add a new config option to disable it when requested.
Also disable boost-type_erasure for the host variant to keep it as
minimal as possible.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The module description can be found in the release notes of v1.61.0:
http://www.boost.org/users/history/version_1_61_0.html
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_PACKAGE_BOOST_ARCH_SUPPORTS option was originally added in
commit feeab03fa6 to be able to disable
Boost on broken NIOSII CodeSourcery toolchains.
However, since then, the CodeSourcery toolchain has been updated, and
once the fenv problem is fixed, this NIOSII toolchain is capable of
building Boost.
Thanks to this we can completely get rid of the
BR2_PACKAGE_BOOST_ARCH_SUPPORTS symbol, from boost itself and from all
its reverse dependencies.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The fenv support provided by glibc on NIOSII and Microblaze is not
sufficient for Boost, causing the same build failures as the ones we had
with uClibc.
To address this, we adapt (and rename) the existing
0006-uclibc-fenv.patch by forcefully disabling fenv support in Boost on
NIOSII and Microblaze, in addition to the existing uClibc exclusion.
Fixes (for NIOSII):
http://autobuild.buildroot.net/results/9b8c5d2cd31d63ae70b41d1434868c83e65b8423/
Fixes (for Microblaze):
http://autobuild.buildroot.net/results/0b9db4c5cfd80d75eb620dbf7a6201faed7230a1/
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The boost build system does not recognize the fact that fenv.h is an
optional module in uClibc and tries to use it even if UCLIBC_HAS_FENV
is disabled. This patch disables fenv support completely when compiling
with a uClibc-based toolchain.
Fixes
http://autobuild.buildroot.net/results/160/160e1b98b204148ecf128144826554b6c523931b/
and many others
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The boost package adds a dependency on the libiconv package when
boost-locale is selected but locale support is not available in the
toolchain. However, it forgets to select BR2_PACKAGE_LIBICONV in this
situation, causing the following build failure:
http://autobuild.buildroot.org/results/ab1809f4fa8cf29208f9503edd90aca87fe397c2/
This commit fixes this mistake by adding the necessary select
BR2_PACKAGE_LIBICONV.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Coroutine2 is a new (C++14) library added in boost 1.59.0. We also add
coroutine2 to the '--without-libraries' configuration flag for the host
variant.
Build successfully tested with Arago ARMv5 2011.09 - a gcc v4.5.3 toolchain.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The build step for the target was missing, causing the compilation to happen
during the staging install step. Add a dedicated build step like we do for
the host build.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host and target build steps were mixed between eachother. Reorder them
so we have the target steps before the host ones.
No functional change, but helps readability.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The boost build is very verbose (11K+ lines even when no sub options are
enabled). While this can be handy for debugging, make is less verbose when
'make -s' is used, similar to how we do it for autotools.
With this, make -s boost outputs less than 100 lines.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Instead of using a patch to specify the architecture variant for
sparc, use some Boost configure variables.
[Thomas: reword commit log.]
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The boost context module does not build on sparc, even if sparc is
advertised as a supported architecture by the boost documentation. So
let's disallow this module for the time being.
Fixes:
http://autobuild.buildroot.org/results/206/2060e6e31c4d739947097faf6587e0a06681fee2/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The default for sparc is v7, which doesn't work for sparc64.
Use ultrasparc for sparc64.
Fixes following autobuild errors:
http://autobuild.buildroot.net/results/0cad0a6eddc153098bb6d1501afd1cf4a57a82d1/
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To help understanding the list of architectures supported by
Boost.Context, add a link to the appropriate documentation page.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It was disabled by default by commit
611dfe6cb5 because it caused some build
failures on AArch64 and SuperH. However, the coroutine module needs
the context module, which is only available on certain architectures.
We can therefore allow enabling the coroutine module, but only if the
context module is available.
[Thomas: extend commit log with more details.]
Signed-off-by: Edson Siqueira <edson.siqueira@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use BR2_SHARED_STATIC_LIBS for building both static and shared boost libs.
The static libs are copied to the staging directory. Only the shared libs are
copied to the rootfs image.
[Thomas:
- remove empty else clause, and instead add a comment that explains
why we're doing something only for the BR2_STATIC_LIBS=y and
BR2_SHARED_LIBS=y.
- remove trailing backslash at the end of the BOOST_CONF_OPTS
definition.]
Signed-off-by: Jonathan Ben Avraham <yba@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a patch to Boost to make it use the eventfd()
function provided by the C library when uClibc is used, rather than
falling back to using directly the __NR_eventfd system call. This
fixes the build on ARC, which doesn't define __NR_eventfd.
The original problem is that uClibc pretends to be glibc 2.2, which
didn't had eventfd(), so Boost makes the system call
manually. uClibc-ng, in its next release, will pretend to be glibc
2.10 (see
http://cgit.uclibc-ng.org/cgi/cgit/uclibc-ng.git/commit/?id=4ff3a6c8eb91db71d6dc3d2932b66e848bd20ac3),
which will also fix the problem, but requires bumping the uClibc
version, rebuilding the external toolchains, and so on.
Ideally, Boost should be doing a compile test to detect if eventfd()
is available or not, but the Boost build system is so brain-damaged
that doing so would require way too much effort.
Fixes:
http://autobuild.buildroot.org/results/22b/22b710346d2cd78b7b51cdccd18d670bb6ac5d24/
and many similar build failures
[Peter: minor tweaks to description]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also remove the variables TARGET_CC_VERSION and HOST_CC_VERSION which
lack the BOOST_ prefix and are used only once.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The build of boost-log with a uClibc toolchain on PowerPC fails with
some weird C++ issues. Since nobody ever looked into this problem,
let's "fix" the autobuilder issue by not allowing to select boost-log
in such a situation.
Fixes:
http://autobuild.buildroot.net/results/13b43105caf4d3952de70030b51f8d96cf6604ee/
(and many, many similar build failures)
[Peter: also add dependency to comment]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
-q option is missing in BOOST_INSTALL_STAGING_CMDS,
so the build doesn't stop on the first error.
This help to see what happened.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current NIOS 2 toolchains are not capable of building Boost, so
let's disable it and its reverse dependencies. Even though it's not
strictly an architecture dependency, we use the <pkg>_ARCH_SUPPORTS
paradigm for this dependency, since it simplifies a lot handling all
boost reverse dependencies, and is anyway quite similar to an
architecture dependency since we don't display a comment about this
dependency.
Fixes:
http://autobuild.buildroot.net/results/e119b1ef55c546e0d0598b85c46ceefa5c43d5a6/
[Peter: also update mpd comment]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
