tvheadend tries to impersonate an autotools package, when it is not.
This breaks the build.
tvheadend's ./configure tries to run compiled code.
This breaks the build.
Switch tvheadend over to using the generic-package infrastructure,
and provide carefully-crafted _CMDS for each steps.
We still keep a post-install hook to install our "DB" since it is not
part of tvheadend, but an addition of our own packaging of tvheadend.
Fixes:
http://autobuild.buildroot.net/results/3ea/3eaa17b94975477263fe12e201eec9cbeeb2912c/http://autobuild.buildroot.net/results/7c8/7c85db0dfab98808c97a5ef17dec9d1071dc0d49/
and a few others as well.
[Peter: tweak 004-dont-run-compiled-code.patch description as pointed out by Thomas]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/73d736dd3c8a70358ef4b19a63dda46178cf8bf1/
Note that the propagation of the thread dependency to the oprofile
package is a little bit non standard, because oprofile selects libpfm4
only on the PowerPC architecture. So we ensure the thread dependency
is only enforced on PowerPC, and a separate comment is displayed when
thread support is not available, but the PowerPC architecture is used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The alsa-utils configure script will use pkg-config if available,
so make sure that it is available.
Signed-off-by: Sven Neumann <neumann@teufel.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Loosely based on the patch from bug #5066.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The glibc dynamic linkers for ppc64 and s390x are named ld64.so.*
so modify the check_glibc test to match them.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since only one firmware is used to boot the Raspberry Pi, there is no
reason to install all of them.
Add an option to select what firmware to install.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current TOC level is set to 4, which does not mean 'a 4-level deep TOC',
but really means 'a TOC deep to the 4th level', with the first level being
level 0, which means we have:
12. Appendix
12.1. Makedev syntax documentation
12.2. Makeuser syntax documentation
12.3. Partition table layout description syntax
12.3.1. The global section
Properties for the global section
Which a bit too much. And yet, the fifth level is not shown, since we
don't have any! :-/
Limit the depth of the TOC to three levels, which is just enough to be
usefull, yet not cluttered by low-level titles.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On some shell environments the EUID variable, which checks the
user id, is not defined. Use `id -u` instead.
This patch mutes the following error:
./board/cubietech/cubieboard/mkcubiecard.sh: 31: [: -ne: unexpected operator
Signed-off-by: Andi Shyti <andi@etezian.org>
Reviewed-by: Arvid Picciani <aep@exys.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Install syslogd/klogd to /sbin instead of /usr/sbin to really win over
busybox and avoid the ugly noise when booting without busybox installed.
Also drop uninstall hook and manpage installation.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When busybox isn't installed symlink agetty->getty to make the default
inittab work.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Install PAM configuration files for su (with "su -" variant) and login
when the tools are enabled.
This finally fixes bug #5366 and now we can login with an util-linux
/bin/login.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Install default "other" configuration file that denies everything not
handled by other specific configurations.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Set PERL=missing so as to avoid generating manpages with help2man that breaks
on many occasions (and it's pointless).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Notice that the license is quite special. It is basically MIT with the
difference that it only allows use for:
'research and educational purpose and without fee ... Use of this software
in whole or in parts for direct commercial advantage requires explicit
prior permission'
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
According to the information from oracle website, version 5.3.21 is no longer
available for download. Let's upgrade to version 5.3.28.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* Add arpd support via the new berkeleydb compat option.
* Remove uninstall define.
* Install ifcfg if bash on the target is enabled.
* Misc cleanups.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add DB 1.85 compatibility layer option, it's needed for arpd in iproute2
and other old apps that haven't moved to the newer API.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Misc fixes and improvements all over the place, mostly fixes.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This fixes a few shortcomings in the boot firmware:
- emmc pll clock issues
- audio underruns and chirps
- unload of sensor drivers (?)
- missing config.txt no longer borks the boot
- lockups during long exposures on the camera
- YUV-to-texture fastpath for the camera
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These instructions should probaby go in the Buildroot manual, but at
this point, it's not clear in which section they should go. So in
order to not loose those notes, add them to the Grub help text.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Grub can be configured to enable or disable the filesystems supported
in the stage 2. In addition, there are filesystem specific stage
1.5. In order to save space and build time, we provide a new option
that allows to give a space-separated list of filesystems that Grub
should support.
We default to support FAT and ext2, since most of the other
filesystems are fairly unlikely to be used.
We use this option to:
1) Pass --enable-<fs> or --disable-<fs>, which enables/disables the
support of <fs> in Grub stage 2.
2) Install only the stage 1.5 that correspond to the selected
filesystems.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Make the splashimage line in menu.lst only active when splashimage
support has really been enabled in the Grub configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Two improvements to the menu.lst file:
* Do not enforce any video mode, let the kernel use whatever it wants
as the default, or let the user customize it when needed.
* Use /dev/sda1 instead of /dev/hda1. Nowadays, most hard disk
controllers are handled using libata, and therefore the disks are
visible as /dev/sd<X>.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit brings a number of improvements to the grub packaging:
* It builds grub with the host compiler, which is needed so that we
can build a 32 bits grub even if the target architecture is
x86-64. To make sure we have a host compiler capable of generating
32 bits code, grub now selects the BR2_HOSTARCH_NEEDS_IA32_COMPILER
option. Building with the host compiler is done by cheating and
passing $(HOST_CONFIGURE_OPTS) in GRUB_CONF_ENV.
* Some additional CFLAGS are added to make sure grub builds properly
with modern compilers (-O0, --build-id=none, -fno-stack-protector).
* Removal of the GRUB_INSTALL_STAGING_CMDS which were not used, since
GRUB_INSTALL_STAGING was not set to YES.
* Installation of the "grub" binary in $(HOST_DIR) instead of
$(TARGET_DIR) since it's actually used only on the host to install
grub into an image or device.
* Removal of the grub uninstall commands, since they are generally
considered useless.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds the OBJCOPY and RANLIB variables to
HOST_CONFIGURE_OPTS, since grub legacy will need these defined in
order to build properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some bootloaders (such as Grub) need to be built for x86 (i.e IA32)
even if the target architecture is x86-64. However, when the target
architecture is x86-64, the cross-compiler generated by Buildroot is
not able to generate 32 bits code.
To solve this, we will rely on the host compiler being a x86 + x86-64
compiler. Therefore, this commit introduces the
BR2_HOSTARCH_NEEDS_IA32_COMPILER option, which tells the dependency
checking logic to verify that the host compiler is indeed capable of
building x86 32 bits code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libnl-3 uses threads and this isn't accounted for in crda or
libnl-3*.pc files since crda doesn't use pkg-config.
Since linking order matters for static scenarios also throw in -lnl-3
into NLLIBS first since it gets appended to in crda makefiles to add
libnl-3.
libgcrypt depends on libgpg-error and this isn't accounted for in
crda makefile, but it is in libgcrypt-config script (in the correct
order for static linking), so set LDLIBS calling this script.
Fixes:
http://autobuild.humanoidz.org/results/31c/31c54e16b60f41e2aa9ea6cd43ced694d3ce3ce0/http://autobuild.humanoidz.org/results/a45/a4548583aa63fbf6db9dbdf7e1556b0d23800de5/
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
