Otherwise it will install $(TARGET_DIR)/etc/rc.d/init.d/messagebus when
building on a redhat/fedora host.
Regardless of that we provide our own initscript.
Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Library and some tools (dbus-lanuch, dbus-run-session) are dual
licensed under GPLv2 or AFLv2.1 and others (dbus-monitor, dbus-send,
dbus-cleanup-sockets, dbus-uuidgen) are licensed under GPLv2+
only.
Reviewed-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since v230 of systemd, the compat libraries have been fully removed.
4de282cf93
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
[Thomas: rewrap Config.in help text in Config.in.legacy and put the
option at the right place.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As was suggested by the <pkg>_DEPENDENCIES variable, the audit support
in DBus requires both audit and libcap-ng. However, it didn't take
care of the fact that libcap-ng must be enabled in the configuration
to depend on it, causing some build failures with the newly added
check.
DBus configure.ac confirms that both packages are needed to enable
audit support, so we simply fix the condition to only be true when
both BR2_PACKAGE_AUDIT *and* BR2_PACKAGE_LIBCAP_NG are true.
Fixes:
http://autobuild.buildroot.org/results/239/23953cc66faecb65e9ebf1f6980924f823d736a2/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To detect X11 support dbus uses the autoconf macro AC_PATH_XTRA
http://cgit.freedesktop.org/dbus/dbus/tree/configure.ac#n1264
This macro checks for the optional presence of libICE:
http://git.savannah.gnu.org/gitweb/?p=autoconf.git;a=blob;f=lib/autoconf/libs.m4;h=d2040d731f81fc1693e01d118c45d51ad169d56a;hb=HEAD#l472
quoting dbus configure with libICE not present:
checking for IceConnectionNumber in -lICE... no
quoting dbus configure with libICE being present:
checking for IceConnectionNumber in -lICE... yes
The binary usr/bin/dbus-launch is being linked to libICE and libSM if
the packages are available:
$ output/host/usr/bin/i586-buildroot-linux-uclibc-readelf -a
output/target/usr/bin/dbus-launch | grep NEEDED
0x00000001 (NEEDED) Shared library: [libdbus-1.so.3]
0x00000001 (NEEDED) Shared library: [libSM.so.6]
0x00000001 (NEEDED) Shared library: [libICE.so.6]
0x00000001 (NEEDED) Shared library: [libX11.so.6]
0x00000001 (NEEDED) Shared library: [libc.so.1]
To get a reproducable build add libSM as optional dependency to dbus,
libSM pulls in the dependency to libICE.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
'echo -n' is not a POSIX construct (no flag support), we shoud use
'printf', especially in init script.
This patch was generated by the following command line:
git grep -l 'echo -n' -- `git ls-files | grep -v 'patch'` | xargs sed -i 's/echo -n/printf/'
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: remove S30dbus changes.]
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When systemd is used, /var/lib/dbus becomes dangling symlink, because
nobody does mkdir /tmp/dbus, so /var/lib/dbus/machine-id could not be
written. On SysVinit systems there is init script that creates
/tmp/dbus.
This patch preserves old behavior for SysVinit systems, and introduces
new one for systemd-booted systems: /var/lib/dbus is a persistent
directory, it holds symlink /var/lib/dbus/machine-id -> /etc/machine-id
as machine-id(5) suggests, and /etc/machine-id is managed by systemd.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2014-8148 - If a system service installs unsafe security
policy rules that allow arbitrary method calls then this prevents memory
consumption and possible privilege escalation via
UpdateActivationEnvironment.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since a while, the semantic of BR2_PREFER_STATIC_LIB has been changed
from "prefer static libraries when possible" to "use only static
libraries". The former semantic didn't make much sense, since the user
had absolutely no control/idea of which package would use static
libraries, and which packages would not. Therefore, for quite some
time, we have been starting to enforce that BR2_PREFER_STATIC_LIB
should really build everything with static libraries.
As a consequence, this patch renames BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS, and adjust the Config.in option accordingly.
This also helps preparing the addition of other options to select
shared, shared+static or just static.
Note that we have verified that this commit can be reproduced by
simply doing a global rename of BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS plus adding BR2_PREFER_STATIC_LIB to Config.in.legacy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Fixes:
CVE-2014-7824 - Denial of service via incomplete fix for CVE-2014-3636
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix indent for LIBFOO_USERS and LIBFOO_PERMISSIONS as per the manual example.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It belongs to the package.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove --localstatedir=/var from all autotools packages where it is no longer
needed.
Also remove --localstatedir=/var/lib/dhcp from package dhcp. localstatedir is
used by dhcp to set the default directory for the leases files. This can also
be done by setting --with-*-lease-file=/var/lib/dhcp/*, which is done in
dhcp.mk.
A custom --localstatedir is left in:
* proftpd.mk
* mysql.mk
This is safe to do:
One of the good thing with autoconf is that if you pass:
--localstatedir=/var ... --localstatedir=/var/something
Then /var/something will be used. So, we can set --localstatedir=/var
by default in the infrastructure, and still have certain packages doing
weird things override it. [Thanks to Thomas Petazzoni]
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Buildroot coding style defines one space around make assignments and
does not align the assignment symbols.
This patch does a bulk fix of offending packages. The package
infrastructures (or more in general assignments to calculated variable
names, like $(2)_FOO) are not touched.
Alignment of line continuation characters (\) is kept as-is.
The sed command used to do this replacement is:
find * -name "*.mk" | xargs sed -i \
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*$#\1 \2#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\]\+\)$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\ \t]\+\s*\\\)\s*$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\(\s*\\\)#\1 \2\3#'
Brief explanation of this command:
^\([A-Z0-9a-z_]\+\) a regular variable at the beginning of the line
\([?:+]\?=\) any assignment character =, :=, ?=, +=
\([^\\]\+\) any string not containing a line continuation
\([^\\ \t]\+\s*\\\) string, optional whitespace, followed by a
line continuation character
\(\s*\\\) optional whitespace, followed by a line
continuation character
Hence, the first subexpression handles empty assignments, the second
handles regular assignments, the third handles regular assignments with
line continuation, and the fourth empty assignments with line
continuation.
This expression was tested on following test text: (initial tab not
included)
FOO = spaces before
FOO = spaces before and after
FOO = tab before
FOO = tab and spaces before
FOO = tab after
FOO = tab and spaces after
FOO = spaces and tab after
FOO = \
FOO = bar \
FOO = bar space \
FOO = \
GENIMAGE_DEPENDENCIES = host-pkgconf libconfuse
FOO += spaces before
FOO ?= spaces before and after
FOO :=
FOO =
FOO =
FOO =
FOO =
$(MAKE1) CROSS_COMPILE=$(TARGET_CROSS) -C
AT91BOOTSTRAP3_DEFCONFIG = \
AXEL_DISABLE_I18N=--i18n=0
After this bulk change, following manual fixups were done:
- fix line continuation alignment in cegui06 and spice (the sed
expression leaves the number of whitespace between the value and line
continuation character intact, but the whitespace before that could have
changed, causing misalignment.
- qt5base was reverted, as this package uses extensive alignment which
actually makes the code more readable.
Finally, the end result was manually reviewed.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Cc: Yann E. Morin <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2014-3635 - Buffer access with incorrect length value
CVE-2014-3636 - Allocation of file descriptors or handles
without limits or throttling
CVE-2014-3637 - Missing release of file descriptor or handle after
effective lifetime
CVE-2014-3638 - Algorithmic complexity
CVE-2014-3639 - Allocation of file descriptors or handles without
limits or throttling
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enable systemd support if systemd is selected as init system (require
systemd compatibility libraries).
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This fixes a problem in other packages when they link against dbus. For
instance, with the dnsmasq package:
/buildroot/output/host/usr/bin/mipsel-ctng-linux-uclibc-gcc --static
-lidn -o dnsmasq cache.o rfc1035.o util.o option.o forward.o network.o
dnsmasq.o dhcp.o lease.o rfc2131.o netlink.o dbus.o bpf.o helper.o
tftp.o log.o conntrack.o dhcp6.o rfc3315.o dhcp-common.o outpacket.o
radv.o slaac.o auth.o ipset.o domain.o dnssec.o blockdata.o
-L/buildroot/output/host/usr/mipsel-buildroot-linux-uclibc/sysroot/usr/lib
-ldbus-1 -lpthread
-L/buildroot/output/host/usr/mipsel-buildroot-linux-uclibc/sysroot/usr/lib
-lidn -liconv
-L/buildroot/output/host/usr/mipsel-buildroot-linux-uclibc/sysroot/usr/lib
-llua -lm -Wl,-Bstatic -lhogweed
-L/buildroot/output/host/usr/mipsel-buildroot-linux-uclibc/sysroot/usr/lib
-lnettle -lgmp -Wl,-Bdynamic -Wl,-Bstatic -lgmp -Wl,-Bdynamic
/buildroot/output/host/usr/mipsel-buildroot-linux-uclibc/sysroot/usr/lib/libpthread.a(init.os):
In function `__pthread_initialize_minimal_internal':
init.c:(.text+0x26c): undefined reference to `__libc_setup_tls'
collect2: error: ld returned 1 exit status
make[2]: *** [dnsmasq] Error 1
make[2]: Leaving directory
`/buildroot/output/build/dnsmasq-2.71/src'
When dnsmasq tries to link against dbus it checks the dbus pkgconfig
file to obtain the LIBS that it need to pass to the linker. In the dbus
.pc file you have "-ldbus-1 -lpthread" because -lpthread was used when
building dbus. If you use -pthread when you build dbus, then you will
have -pthread in the dbus .pc file as well.
-lpthread means that we want to link with a library called pthread.
-pthread is a compiler option which will do whatever is needed to be
done to compile with the pthreads standards so that it works.
Fixes:
http://autobuild.buildroot.net/results/7cd/7cdab3b6f74dbfde965300a51e58a377ba30602b/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's there for some historical reason and breaks libpcap with dbus
support for static linkage scenarios (like the one used by tcpreplay).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream removed support for libxml2 as xml backend, select expat
unconditionally.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since we are changing the default dbus user, make sure this user is
consistently created.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In the Config.in file of package foo, it often happens that there are other
symbols besides BR2_PACKAGE_FOO. Typically, these symbols only make sense
when foo itself is enabled. There are two ways to express this: with
depends on BR2_PACKAGE_FOO
in each extra symbol, or with
if BR2_PACKAGE_FOO
...
endif
around the entire set of extra symbols.
The if/endif approach avoids the repetition of 'depends on' statements on
multiple symbols, so this is clearly preferred. But even when there is only
one extra symbol, if/endif is a more logical choice:
- it is future-proof for when extra symbols are added
- it allows to have just one strategy instead of two (less confusion)
This patch modifies the Config.in files accordingly.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When a package A depends on config option B and toolchain option C, then
the comment that is given when C is not fulfilled should also depend on B.
For example:
config BR2_PACKAGE_A
depends on BR2_B
depends on BR2_LARGEFILE
depends on BR2_WCHAR
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
This comment should actually be:
comment "A needs a toolchain w/ largefile, wchar"
depends on BR2_B
depends on !BR2_LARGEFILE || !BR2_WCHAR
or if possible (typically when B is a package config option declared in that
same Config.in file):
if BR2_B
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
[other config options depending on B]
endif
Otherwise, the comment would be visible even though the other dependencies
are not met.
This patch adds such missing dependencies, and changes existing such
dependencies from
depends on BR2_BASE_DEP && !BR2_TOOLCHAIN_USES_GLIBC
to
depends on BR2_BASE_DEP
depends on !BR2_TOOLCHAIN_USES_GLIBC
so that (positive) base dependencies are separate from the (negative)
toolchain dependencies. This strategy makes it easier to write such comments
(because one can simply copy the base dependency from the actual package
config option), but also avoids complex and long boolean expressions.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(untested)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch lines up the comments in Config.in files that clarify which
toolchain options the package depends on.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This finally removes the BR2_HAVE_DEVFILES option, that was used to
install/keep development files on target. With the recent migration of
the internal backend to the package infrastructure, we had anyway lost
the ability to build gcc for the target, and install the uClibc
development files on the target.
[Peter: also remove support/scripts/copy.sh]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If you use a custom target skeleton with no /var/lib directory,
then the symlink installation in dbus.mk will fail. This patch
fixes this issue by creating /var/lib before creating a symlink
there.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
