Coroutine2 is a new (C++14) library added in boost 1.59.0. We also add
coroutine2 to the '--without-libraries' configuration flag for the host
variant.
Build successfully tested with Arago ARMv5 2011.09 - a gcc v4.5.3 toolchain.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The build step for the target was missing, causing the compilation to happen
during the staging install step. Add a dedicated build step like we do for
the host build.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host and target build steps were mixed between eachother. Reorder them
so we have the target steps before the host ones.
No functional change, but helps readability.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The boost build is very verbose (11K+ lines even when no sub options are
enabled). While this can be handy for debugging, make is less verbose when
'make -s' is used, similar to how we do it for autotools.
With this, make -s boost outputs less than 100 lines.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Instead of using a patch to specify the architecture variant for
sparc, use some Boost configure variables.
[Thomas: reword commit log.]
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The default for sparc is v7, which doesn't work for sparc64.
Use ultrasparc for sparc64.
Fixes following autobuild errors:
http://autobuild.buildroot.net/results/0cad0a6eddc153098bb6d1501afd1cf4a57a82d1/
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It was disabled by default by commit
611dfe6cb5 because it caused some build
failures on AArch64 and SuperH. However, the coroutine module needs
the context module, which is only available on certain architectures.
We can therefore allow enabling the coroutine module, but only if the
context module is available.
[Thomas: extend commit log with more details.]
Signed-off-by: Edson Siqueira <edson.siqueira@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use BR2_SHARED_STATIC_LIBS for building both static and shared boost libs.
The static libs are copied to the staging directory. Only the shared libs are
copied to the rootfs image.
[Thomas:
- remove empty else clause, and instead add a comment that explains
why we're doing something only for the BR2_STATIC_LIBS=y and
BR2_SHARED_LIBS=y.
- remove trailing backslash at the end of the BOOST_CONF_OPTS
definition.]
Signed-off-by: Jonathan Ben Avraham <yba@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also remove the variables TARGET_CC_VERSION and HOST_CC_VERSION which
lack the BOOST_ prefix and are used only once.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-q option is missing in BOOST_INSTALL_STAGING_CMDS,
so the build doesn't stop on the first error.
This help to see what happened.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Yannick Kiekens <yannickkiekens@gmail.com>
[Thomas: tested on ARM uClibc, and AArch64 glibc, the latter being the
case that used to fail building, and was the reason why boost log had
been disabled.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It was disabled in february 2013 by commit
e5434583ba
because did not build correctly with ucLibc at the time.
It now builds correctly with both uClibc v0.9.33 and uClibc-ng.
Signed-off-by: Noé Rubinstein <nrubinstein@aldebaran.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since a while, the semantic of BR2_PREFER_STATIC_LIB has been changed
from "prefer static libraries when possible" to "use only static
libraries". The former semantic didn't make much sense, since the user
had absolutely no control/idea of which package would use static
libraries, and which packages would not. Therefore, for quite some
time, we have been starting to enforce that BR2_PREFER_STATIC_LIB
should really build everything with static libraries.
As a consequence, this patch renames BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS, and adjust the Config.in option accordingly.
This also helps preparing the addition of other options to select
shared, shared+static or just static.
Note that we have verified that this commit can be reproduced by
simply doing a global rename of BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS plus adding BR2_PREFER_STATIC_LIB to Config.in.legacy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
change remaining occurrences of _OPT into _OPTS.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Just like was done in commit b37641c95b
("boost: Force the target ABI for MIPS architecture") by Vicente for
the MIPS architecture, this commit also forces the ABI passed to Boost
build system to "aapcs" for the ARM architecture.
Since we now have three cases to handle, an intermediate variable
called BOOST_ABI is introduced.
Fixes:
http://autobuild.buildroot.org/results/5ae/5aeb3a9f067faf6687051643bf49a0b619cb4c3b/
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, there are five packages which use 'subst' macro to change their version.
* Three of them (ebtables, icu, perl) use this macro "in place" :
EBTABLES_SITE = http://downloads.sourceforge.net/project/ebtables/ebtables/ebtables-$(subst .,-,$(EBTABLES_VERSION))
ICU_SOURCE = icu4c-$(subst .,_,$(ICU_VERSION))-src.tgz
PERL_CROSS_OLD_POD = perl$(subst .,,$(PERL_CROSS_BASE_VERSION))delta.pod
PERL_CROSS_NEW_POD = perl$(subst .,,$(PERL_VERSION))delta.pod
* Two of them (boost, libnss) use an additional variable :
BOOST_FILE_VERSION = $(subst .,_,$(BOOST_VERSION))
BOOST_SOURCE = boost_$(BOOST_FILE_VERSION).tar.bz2
LIBNSS_SITE_VERSION = $(subst .,_,$(LIBNSS_VERSION))
LIBNSS_SITE = https://ftp.mozilla.org/pub/mozilla.org/security/nss/releases/NSS_$(LIBNSS_SITE_VERSION)_RTM/src
* Additionally two packages (duma, rings) doesn't use it at all :
DUMA_VERSION = 2_5_15
DUMA_SITE = http://downloads.sourceforge.net/project/duma/duma/2.5.15
RINGS_VERSION_MAJOR = 1.3.0
RINGS_SUBDIR = rings-v_1_3_0
This commit makes changes to use 'subst' macro "in place", in all of them.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Define an empty HOST_BOOST_DEPENDENCIES to avoid inheriting
BOOST_DEPENDENCIES.
Also ditch redundant empty definitions for BOOST_DEPENDENCIES and
BOOST_FLAGS.
Fixes:
http://autobuild.buildroot.net/results/9c6/9c64dd473a8096bb6343d746544997e333053e8b/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix build failures that happened after the version bump such as:
http://autobuild.buildroot.net/results/570/570b091702763b29843d9207bc14dea67085fea0/http://autobuild.buildroot.net/results/c26/c26498f1a4e6bcbc3a2dfce6a51fa7d21b72f21f/
and other failures by disabling the new (1.54+) coroutine and log
libraries which weren't handled and hence enabled by default.
These also made the target size bigger and build times longer
unnecessarily.
When/if they are needed for some future user this can be revisited and
their proper conditions for enablement assesed.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, when we need to do a conditional on the type of C library
used, we need to take into account the three toolchain backends. As we
are going to add eglibc support to the Buildroot toolchain backend, it
would become even uglier, so this patch introduces two new hidden
options: BR2_TOOLCHAIN_USES_UCLIBC and BR2_TOOLCHAIN_USES_GLIBC, that
exist regardless of the toolchain backend. The entire Buildroot code
base is converted to use those options.
Note that we have intentionally created only one option
(BR2_TOOLCHAIN_USES_GLIBC) for both glibc and eglibc, since they are
essentially the same, as far as Buildroot is concerned.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
and re-enable boost context library since its compilation with
uClibc is fixed. Disable new atomic library because it can not
compile with uClibc (fixed in upstream version).
Signed-off-by: Victor Hiairrassary <victor.hiairrassary.ml@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When using the --with-icu option without specifying the directory, boost's
bootstrap.sh script will look at "common" locations (lines 289-294):
COMMON_ICU_PATHS="/usr /usr/local /sw"
for p in $COMMON_ICU_PATHS; do
if test -r $p/include/unicode/utypes.h; then
ICU_ROOT=$p
fi
done
With buildroot it may surely become problematic at some point.
Signed-off-by: Ignacy Gawędzki <i@lri.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
At the moment, the boost build is very verbose, it gives both the
Jam-level command being executed, and the underlying system command
being executed, with lots of newlines. Makes it hard to see where the
failure is when there is one.
So, we reduce the verbosity level to -d+1, which only gives the
Jam-level command. So now, it looks like:
common.copy /home/test/outputs/e/host/usr/aarch64-buildroot-linux-gnu/sysroot/usr/include/boost/geometry/multi/multi.hpp
common.mkdir /home/test/outputs/e/host/usr/aarch64-buildroot-linux-gnu/sysroot/usr/include/boost/geometry/strategies
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.7.3/release/threading-multi/icu.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.7.3/release/threading-multi/regex_debug.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.7.3/release/threading-multi/regex_raw_buffer.o
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Boost normally allows to build a non-threaded variant by passing
threading=single or a multi-threaded variant by passing
threading=multi.
Unfortunately, the build of threading=single doesn't seem to work any
more, due to bizarre things in the build system. We get "duplicate
target" errors, that according to
http://lists.boost.org/boost-build/2012/11/26582.php should appear if
we ask for both threading=single,multi. But it seems to happen even in
the threading=single case.
Since Boost is such a big C++ beast, it probably doesn't make much
sense to try to support it on toolchains that don't have thread
support. So, we make the boost package depend on thread support. If
someone cares enough in getting Boost to work in a non-threaded
environment, then we can always revert back.
Note that the boost package has no reverse dependencies in Buildroot,
so we don't need to propagate this new dependency anywhere.
Fixes:
http://autobuild.buildroot.org/results/439e72ac74c8058f30977e6abc39acd6379a17d3/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
