"mkdir" (without "-p") fails if the target directory exists, which means
that if alsa-utils is being reinstalled or if other files have
previously been installed in the alsa-state.d or alsa-restore.d
directories the installation will fail.
Switch to "$(INSTALL) -d" which allows us to be explicit about the
permissions and handles the case of a pre-existing directory correctly.
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Switched _SITE to https.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
ucm needs mixer since version 1.2.1 and
5c88b18371
So add a BR2_PACKAGE_ALSA_LIB_UCM option that selects
BR2_PACKAGE_ALSA_LIB_MIXER and selects this new option in
BR2_PACKAGE_ALSA_UTILS_ALSAUCM to avoid a build failure
Fixes:
- http://autobuild.buildroot.org/results/aaa615d4e38d100bb9001ecdf7357e755ef42a87
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This allows the user to enable/disable manually the unit.
It is enabled by default
Signed-off-by: Jérémy Rosen <jeremy.rosen@smile.fr>
[yann.morin.1998@free.fr:
- split logn lines
- no need for continued line (no use for ';\' )
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
atopology is needed to build alsa-utils since version 1.2.1 and
c8fdd38c74
However, atopology is not correctly detected if --disable-alsatest is
passed so drop --disable-alsatest that is not needed since commit
2c03ec15307b567fd2250fe2a7981a89d19b87a9 (from 2002), which removed
AC_TRY_RUN
Fixes:
- http://autobuild.buildroot.org/results/d0fb760669b02b813115af04adcf24530d35f4e1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Also remove the patch that have been upstreamed
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.
alsa-utils uses the systemdsystemunitdir variable from systemd.pc to
decide where to install things. Since DESTDIR is prepended to the
install destination, this will end up in the wrong location.
Until a better solution is found in pkgconf, pass the
systemdsystemunitdir to use explicitly instead of relying on systemd.pc.
Fixes:
- http://autobuild.buildroot.org/results/d8ad140ae52b4fe8e153de3835f3f17e92b58e53
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes (reported by Yann E. MORIN, [1]):
/usr/bin/install -D -m 0644 .../build/alsa-utils-1.1.6/alsactl/alsa-restore.service .../target/usr/lib/systemd/system/alsa-restore.service
/usr/bin/install: cannot stat '.../build/alsa-utils-1.1.6/alsactl/alsa-restore.service': No such file or directory
[1] http://lists.busybox.net/pipermail/buildroot/2018-November/236355.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit 4707383c5d ("alsa-utils: needs
dynamic library support"), we added a !BR2_STATIC_LIBS dependency
because topology/topology.c was including <dlfcn.h>.
However, it turns out that this include is not needed/used at all, so
we can instead drop it, and re-enable the package in BR2_STATIC_LIBS
configuration.
This was discovered when analyzing why we have
package/alsa-lib/0003-alsa-lib-conditionally-enable-libdl-in-AM_PATH_ALSA-.patch. This
patch fixes the AM_PATH_ALSA autoconf macro, used by alsa-utils, so
that ALSA_LIBS doesn't carry the -ldl option, fixing static-linking
scenarios. This patch had become useless since alsa-utils was no
longer available in BR2_STATIC_LIBS configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BR2_PACKAGE_ALSA_UTILS_BAT option currently selects
BR2_PACKAGE_FFTW. However, it turns out that fftw is not a mandatory
dependency to build alsabat, just an optional dependency.
This commit therefore turns this dependency into an optional
one. However, it is not just FFTW that is necessary, but the simple
precision version of FFTW, so the optional dependency takes this into
account.
We take this opportunity to extend the Config.in help text for
BR2_PACKAGE_ALSA_UTILS_BAT.
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This reverts commit c69088b8c3, which is
no longer needed now that alsa-lib has been fixed properly.
Indeed, this commit was made because alsa-utils failed to build with:
/home/buildroot/build/instance-0/output/host/usr/xtensa-buildroot-linux-uclibc/sysroot/usr/lib/libasound.a(pcm_dmix.o): In function `snd_pcm_dmix_htimestamp':
pcm_dmix.c:(.text+0x5c0): warning:
/home/buildroot/build/instance-0/output/host/usr/xtensa-buildroot-linux-uclibc/sysroot/usr/lib/libasound.a(rawmidi_symbols.o):(.data.rel+0x4): undefined reference to `_snd_module_rawmidi_virt'
collect2: error: ld returned 1 exit status
Which is exactly the problem that we fixed in alsa-lib by making sure
that rawmidi_symbols.c doesn't reference symbols from rawmidi_virt.c
when SEQ support is not enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter a in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license strings as much as possible.
SPDX short identifier for GPLv2/GPLv2+ is GPL-2.0/GPL-2.0+.
This change is done by using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/\<GPLv2\>/GPL-2.0/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ncurses sub-options BR2_PACKAGE_NCURSES_TARGET_{FORM,MENU,PANEL}
are currently very badly broken: they only control whether the
libform, libmenu and libpanel libraries are installed in
$(TARGET_DIR), but do absolutely nothing about their installation in
$(STAGING_DIR).
This means that when one of those options is disabled, the
corresponding library is indeed not installed in the target, but is
available in staging. It can therefore be detected by the configure
script of another package and used... even though the library will not
be in the target, causing a runtime failure.
Internally, ncurses.mk uses the "make install" logic of ncurses for
the staging installation, but uses a completely hand-written logic for
the target installation, which is the reason for this
desynchronization between what's installed in staging and target.
When BR2_PACKAGE_NCURSES_WCHAR=y, this also causes some build
failures. Indeed, when BR2_PACKAGE_NCURSES_WCHAR=y, Buildroot creates
some symbolic links lib<foo>.so -> lib<foo>w.so in staging and target,
but only for the lib<foo> that have been enabled by
BR2_PACKAGE_NCURSES_TARGET_{FORM,MENU,PANEL}. Due to this, a package
that for example needed the libmenu library but forgot to select
BR2_PACKAGE_NCURSES_TARGET_MENU was:
- Building fine with BR2_PACKAGE_NCURSES_WCHAR disabled (because
libmenu.so exists in staging), but would fail to run at runtime
because libmenu.so is not in the target.
- Fail to build with BR2_PACKAGE_NCURSES_WCHAR=y because only
libmenuw.so exists, and not the libmenu.so symbolic link.
Since those libraries are small (43K for libform, 21K for libmenu and
8.2K for libpanel), this commit takes the very simple approach of
removing those options, and installing the libraries
unconditionally. It therefore uses the "make install" logic for both
the staging *and* target installation.
In detail, this commit:
- Removes the NCURSES_PROGS variable, not needed since
--without-progs already allows to disable the build and
installation of programs.
- Removes the NCURSES_LIBS-y variable, and replaces it with a single
unconditional assignement to NCURSES_LIBS, only used to create the
lib<foo>w.so -> lib<foo>.so symbolic links when wchar support is
enabled.
- Removes NCURSES_INSTALL_TARGET_CMDS and the functions it was
calling: NCURSES_INSTALL_TARGET_LIBS and
NCURSES_INSTALL_TARGET_PROGS.
- Adds a NCURSES_TARGET_SYMLINK_RESET hook to create the reset ->
tset symbolic link, as was done before.
- Adds a NCURSES_TARGET_CLEANUP_TERMINFO to cleanup the terminfo
files in the target, so that we stay in the same situation in terms
of installed terminfo files.
- Removes the BR2_PACKAGE_NCURSES_TARGET_{FORM,MENU,PANEL} options
from the Config.in files: both their definition and usage.
- Simplifies all the symlink dance for lib<foo> -> lib<foo>w, because
as Yann E. Morin suggested, this dance is only needed in staging, not
in the target. Once binaries have been built, they refer to the
SONAME of the library, which is the lib<foo>w variant (for shared
linking). For static linking and .pc files, it's obvious that we
don't care about them on the target. Therefore the
NCURSES_LINK_LIBS_STATIC, NCURSES_LINK_LIBS_SHARED and
NCURSES_LINK_PC functions no longer take any argument: they always
apply to STAGING_DIR only. NCURSES_LINK_TARGET_LIBS is removed.
It is worth mentioning that adding Config.in.legacy support is *NOT*
necessary. Indeed:
- If they were disabled before this patch, having them in
Config.in.legacy would not trigger the legacy warning.
- If they were enabled before this patch, then the behavior is
unchanged: all libraries are now unconditionally installed. So
there is no point in warning the user.
We double-checked the installed size of a filesystem containing just
ncurses before and after this patch, and the only folder that has its
size changed is /usr/lib, growing from 852 KB to 932 KB in the wchar
enabled case. That's a 80 KB system size increase.
This commit fixes the sngrep build failure and potentially numerous
runtime issues with ncurses.
Fixes:
http://autobuild.buildroot.net/results/7b5db21a6c568e6c6c8fe2b5d5a2f5ca24df510c/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The alsaucm man page rst source file is missing in the tarball. When rst2man
is detected on the host, build fails:
make[2]: *** No rule to make target 'alsaucm.1', needed by 'all-am'. Stop.
Upstream added[1] the missing file to the tarball to fix this issue. But since
we don't need the manpage to begin with, just disable rst2man to shorten build
time by a few milliseconds.
[1] http://git.alsa-project.org/?p=alsa-utils.git;a=commitdiff;h=c6bdde171e1532f7b37333a5a746b6e662f12c53
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patches upstream so drop them.
The 'bat' binary utility was renamed to 'alsabat' probably to avoid some
clash, keep the old .config symbol to avoid pointless legacy.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop the now useless comment.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we now depend on !BR2_STATIC_LIBS to be able to build the
alsatplg tool, it makes sense to provide an option to install it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the definitions of the alsa-utils sub-options, the 'select' were
before the 'bool', which is unusual and does not follow how we do
things in general in Buildroot. This commit fixes that for all
alsa-utils suboptions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since recent bumps of alsa-lib and alsa-utils, alsa-lib installs
<alsa/topology.h>, which alsa-utils uses to build an alsatplg program
which requires <dlfcn.h>. Therefore, alsa-utils now needs dynamic
library support.
Fixes:
http://autobuild.buildroot.net/results/7ba954e03822d758e25356935b0dfc2c91d3712a/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that largefile is mandatory removes package dependencies and
conditionals.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
alsa-utils needs to link with intl if the toolchain needs gettext and
locale is set. Otherwise we will see an error like this one:
alsamixer-cli.o: In function `main':
cli.c:(.text.startup+0x4d): undefined reference to `libintl_textdomain'
cli.c:(.text.startup+0xc1): undefined reference to `libintl_gettext'
cli.c:(.text.startup+0xd5): undefined reference to `libintl_gettext'
cli.c:(.text.startup+0xe9): undefined reference to `libintl_gettext'
cli.c:(.text.startup+0x1fd): undefined reference to `libintl_gettext'
cli.c:(.text.startup+0x223): undefined reference to `libintl_gettext'
Fixes:
http://autobuild.buildroot.net/results/707/707016a2490fc97b98d17e2b6a9c6423a56bb4a9/
[Peter: correct autobuilder reference]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To get a reproducable build add optional gettext dependency.
- Configure log without gettext
checking for GNU gettext in libc... no
checking for iconv... yes
checking for working iconv... guessing yes
checking for GNU gettext in libintl... no
checking whether to use NLS... no
- Configure log with gettext built before alsa-utils
checking for GNU gettext in libc... no
checking for iconv... yes
checking for working iconv... guessing yes
checking for GNU gettext in libintl... yes
checking whether to use NLS... yes
checking where the gettext function comes from... external libintl
checking how to link with libintl... -lintl
Tested using this defconfig
BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
BR2_TOOLCHAIN_BUILDROOT_INET_IPV6=y
BR2_TOOLCHAIN_BUILDROOT_INET_RPC=y
BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
BR2_PACKAGE_ALSA_UTILS=y
BR2_PACKAGE_ALSA_UTILS_ALSACONF=y
BR2_PACKAGE_ALSA_UTILS_AMIDI=y
BR2_PACKAGE_ALSA_UTILS_AMIXER=y
BR2_PACKAGE_ALSA_UTILS_APLAY=y
BR2_PACKAGE_ALSA_UTILS_IECSET=y
BR2_PACKAGE_ALSA_UTILS_ACONNECT=y
BR2_PACKAGE_ALSA_UTILS_APLAYMIDI=y
BR2_PACKAGE_ALSA_UTILS_ARECORDMIDI=y
BR2_PACKAGE_ALSA_UTILS_ASEQDUMP=y
BR2_PACKAGE_ALSA_UTILS_ASEQNET=y
BR2_PACKAGE_ALSA_UTILS_SPEAKER_TEST=y
BR2_PACKAGE_NCURSES_WCHAR=y
[Thomas:
- it's not only alsamixer, but also several other alsa-utils
utilities, like aplay or arecord, which optionally depend on
gettext. Therefore, the patch was changed to have the optional
gettext dependency apply to the entire package.
- in addition, we don't need gettext when locales are enabled:
alsa-utils builds perfectly fine with a toolchain having locales
enabled even without gettext. So all we really want is to have
gettext built before alsa-utils, if gettext is enabled.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Point the build to the proper (which BTW was broken since it pointed to
the wrong directory) ncurses config by using $(NCURSES_CONFIG_SCRIPTS)
from the ncurses package directly.
Also select the proper variant (widec/non-widec) in configure.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
