<roman.gorbenkov@ens2m.org>: host mxd.relay.renater.fr[194.214.200.9] said: 550
5.5.0 Requested actions not taken as the mailbox is unavailable (in reply
to RCPT TO command)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add myself to DEVELOPERS as maintainer of davinci-bootcount.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A library to control commonly available 64x64, 32x32 or 16x32
RGB LED panels with the Raspberry Pi. Can support PWM up to
11Bit per channel, providing true 24bpp color with CIE1931
profile.
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
[Arnout: reorder build/install hooks inside conditions]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Upstream maintainer, now also maintainer in Buildroot.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add myself as co-maintainer of SMCRoute in Buildroot, handy since I'm
the upstream maintainer anyway.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Raspberry-Pi Zero 2 W is an affordable single board computer. It is
a more powerful drop-in replacement for the Raspberry Pi Zero W.
The board incorporates an Raspberry-Pi RP3A0 system-in-package (SiP) with
a Broadcom BCM2710A1 and 512MB LPDDR2 SDRAM. The CPU is a quad-core 1Ghz
64-bit Arm Cortex-A53. As for other Raspberry-Pis it also provides
2.4GHz 802.11 b/g/n Wifi, Bluetooth 4.2 and BLE.
The BCM2710 cpu is similar to the Raspberry-Pi 3, it uses the same
kernel configuration as the Raspberry-Pi 2 and 3.
Signed-off-by: Julien Grossholtz <julien.grossholtz@openest.io>
[Based on https://patchwork.ozlabs.org/project/buildroot/patch/20211030213600.3445223-3-julien.grossholtz@openest.io/
- reformat genimage-raspberrypizero2w.cfg according to the beautify patch-set
- update kernel version to 9878a11 (5.10.78)
- use new bcm2710-rpi-zero-2-w dtb
- update commit log about kernel config (RPi2/3)
- add DEVELOPERS entries for Julien
]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a defconfig for the Allwinner Nezha, a raspberrypi-style board built
around the RISC-V 64bit D1 SoC.
There is currently no upstream support, so use the git repos from Samuel
Holland as explained on the linux-sunxi wiki:
https://linux-sunxi.org/Allwinner_Nezha
The U-Boot DTB is also used by opensbi, but the two branches are
unfortunately not in sync at the moment, so add a patch to fix the
compatible for the PLIC so opensbi makes it available to S-Mode (Linux).
The use of the sun20i-d1-spl SPL bootloader / TOC1 file format also makes it
a bit more complicated to build the boot image. As this is expected to only
be a temporary issue, add a U-Boot patch to build the TOC1 image as part of
the build rather than adding explicit support in our U-Boot package to do
it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
U-Boot does not yet have SPL code to initialize the DDR controller on the
Allwinner D1 - So instead package the sun20i-d1-spl bootloader, which is
based on boot0 from the Allwinner BSP with some modifications to build it
separately from the BSP and boot mainline U-Boot as explained on the
linux-sunxi wiki:
https://linux-sunxi.org/Allwinner_Nezha
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package is the userspace daemon, client tool, and library for the
team device implementation in the Linux kernel. Team is an alternative
to the traditional bonding driver and provides more "runners", or modes,
of operation for aggregates. None of these modes are enabled by default
and need a custom kernel config.
Backported the three most relevant patches to fix musl build, revert of
a fix prior to 1.31 that can cause high CPU load, and a fix to prevent
failing to stop the daemon due to too short timeout for kill command.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
[yann.morin.1998@free.fr: slight reword in help text]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Based on initial work from Nicolas Carrier
<nicolas.carrier@orolia.com>, with the following additions:
- Updated to a newer version
- Added proper license file handling
- Added runtime test case
- Restricted to Python 3.x
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
His e-mail is no longer responding:
** Address not found **
Your message wasn't delivered to mirza.krak@northern.tech because the address couldn't be found, or is unable to receive mail.
Learn more here: https://support.google.com/mail/?p=NoSuchUser
The response from the remote server was:
550 5.1.1 The email account that you tried to reach does not exist. Please try double-checking the recipient's email address for typos or unnecessary spaces. Learn more at https://support.google.com/mail/?p=NoSuchUser bi21si292758edb.0 - gsmtp
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add Giulio Benetti to all Olimex Allwinner boards' defconfigs since I've
recently updated and tested them all and I'd like to receive possible
build failure from gitlab CI/CD.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since I'm the upstream maintainer, it'd be nice to get Cc:ed on any
issues with the package.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The php-pecl-dbus package provides a PHP extension for interaction
with D-Bus busses.
https://github.com/derickr/pecl-dbus
Based on initial work from Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch adds support for watchdogd, a watchdog daemon with built-in
process supervisor[1] as well as support for monitoring memory & file
descriptor leaks, and CPU load average. When a monitored resource
reaches a high watermark, a warning message is logged and when critical
level is reached, the cause is saved and the system is rebooted. On
reboot the reset cause can be retrieved to help locate the culprit.
Support for SysV init script in this patch, and systemd unit file is
installed from the one bundled with the package. Both files supoort
additional command line options in /etc/default/watchdogd.
The Config.in is slightly big, but allows for disabling or adjusting
the poll interval for each resource monitor.
For more information, see https://github.com/troglobit/watchdogd
[1]: processes must have their main loop instrumented for supervision.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The patch adds a package for softhsm2.
Signed-off-by: José Pekkarinen <jose.pekkarinen@unikie.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Canfestival hasn't seen a patch since November of 2017, and it requires python2
to build. Remove the package.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Commit b36c4e594c forgot to remove
board/qemu/csky abd configs/qemu_csky* from DEVELOPERS file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package provides a set of tools originally developed for the
OpenWrt project. They allow working with various firmware formats that
are required for flashing new images on embedded devices.
One of tools (mkhilinkfw) depends on OpenSSL and doesn't support any
other SSL library (like wolfSSL) directly. It can be used with wolfSSL
using its compatibility layer though.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
[Arnout: add comment about missing license files]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Adding myself as co-maintainer of libuev alongside Peter Seiderer, his
initiative, and I am the upstream so seems logical.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
450 4.1.1 <arthur.courtel@smile.fr>: Recipient address rejected: User
unknown in virtual mailbox table
Arthur is no longer at Smile.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The libdbi-drivers project provides the database-specific drivers
for the libdbi framework
http://libdbi-drivers.sourceforge.net/
Based on initial work from Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
libdbi implements a database-independent abstraction layer in C,
similar to the DBI/DBD layer in Perl.
http://libdbi.sourceforge.net/
Based on initial work from Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The lua-augeas package provides a Lua binding for augeas
https://github.com/ncopa/lua-augeas
Based on initial work from Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
dtbocfg, which stands for Device Tree Blob Overlay Configuration
File System, was developed to serve as a userspace API of Device
Tree Overlay.
https://github.com/ikwzm/dtbocfg
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since I'm the upstream maintainer and we use it for $DAYJOB, I'll adopt.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The files added by this commit are associated both to Nicolas Carrier
and myself in the DEVELOPERS, as this commit is based on initial work
from Nicolas.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit adds a new package called python-flask-expects-json, which
also to validate the JSON blurbs submitted to a Flask web
application. A runtime test is added as well, making sure that the
package minimally works with an example Flask application.
The files added by this commit are associated both to Nicolas Carrier
and myself in the DEVELOPERS file, as Nicolas is also interested in
this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit adds a test for python-flask package. As we are about to
add python-flask-expects-json together with a test, it made sense to
also add a test for python-flask itself.
As far as the DEVELOPERS file is concerned, the test files are added
both to the existing maintainer of package/python-flask, as well as to
myself.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch adds runtime testing of the OCI archive created by the
sloci scripting. It launches a containerd instance, imports, and
runs the OCI container.
The existing QEMU AARCH64 kernel config was extended to enable common
options used by a container runtime (cgroup and overlayfs).
Signed-off-by: Matthew Weber <matthew.weber@collins.com>
[Arnout: adapt file name which is arm64 now; add to DEVELOPERS]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
sloci-image is a simple CLI tool for packing rootfs into a single-layer
OCI image.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Matthew Weber <matthew.weber@collins.com>
[Arnout: correctly set PREFIX, add Matt to DEVELOPERS, add additional
patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
